Hi there, I'm going to be attempting to install the OEM sensor kit into a MK7 Golf today, a RHD also. So, is the buzzer and PDC module in the driver or passenger side on a RHD Golf? Cheers, Mac
@@treetontv Yes, on a RHD Golf MK7 the buzzer clips onto a slot on the top of the fuse box which is behind the glove box on the passenger side. The PDC module clips on just behind the accelerator pedal. The CanBus module is in behind the dash below the steering wheel, very difficult to get at. You also need to remove the glove box completely to get the buzzer clipped onto the top of the fusebox, it's difficult to remove also. If you buy your kit on Ali Express you need to be careful as they are most likely designed for a LHD Golf MK7 and the wiring harness is different for a RHD. I ended up having to extend and shorten the harness to suit the RHD, it was a total pain ..
Hallo, Ich möchte Parksensoren in meinen Golf 7 einbauen, aber das Produkt ist kein Original VW OEM Teil. Kann ich den Strom des Parksensors vom BCM nehmen, anstatt den Strom vom Rückfahrscheinwerfer zu beziehen, und den Parksensor mit VCDS codieren? Danke.
Спасибо тебе, добрый человек. Ты спас мои нервы и сэкономил несколько часов работы.
Привет из Латвии!
Did you have to remove the airbag to get to the buzzer?
Hello, for what are the holes...are there any screws or how do you get it out
Hello, did you get the fault code 1111316 Speaker for front parking aid
الله ينور يا هندسة الغالي احنا منستفاد منك اللة يعطيك العافيه
Hello, I have a right hand drive Golf 7. I'm having trouble getting to the buzzer to remove it. How to get in behind fuse panel??
Hi there,
I'm going to be attempting to install the OEM sensor kit into a MK7 Golf today, a RHD also.
So, is the buzzer and PDC module in the driver or passenger side on a RHD Golf?
Cheers,
Mac
@@macartanmcquaid22 Hi. Have you managed to figure out on what side it is? And how difficult is it to get behind the fuse panel? Thanks!
@@treetontv Yes, on a RHD Golf MK7 the buzzer clips onto a slot on the top of the fuse box which is behind the glove box on the passenger side. The PDC module clips on just behind the accelerator pedal.
The CanBus module is in behind the dash below the steering wheel, very difficult to get at.
You also need to remove the glove box completely to get the buzzer clipped onto the top of the fusebox, it's difficult to remove also.
If you buy your kit on Ali Express you need to be careful as they are most likely designed for a LHD Golf MK7 and the wiring harness is different for a RHD. I ended up having to extend and shorten the harness to suit the RHD, it was a total pain ..
@@macartanmcquaid22 noted with thanks!
@@macartanmcquaid22 how to reach over the fuse box mate…
Hay vere vere good job
Es hat geklappt! Nur eine riesen Fummelei!
Hallo,
Ich möchte Parksensoren in meinen Golf 7 einbauen, aber das Produkt ist kein Original VW OEM Teil. Kann ich den Strom des Parksensors vom BCM nehmen, anstatt den Strom vom Rückfahrscheinwerfer zu beziehen, und den Parksensor mit VCDS codieren? Danke.
Myslel som, ze to pouziva normalne vyskove repraky v A stlpikoch
Ja som ho hladal pol roka. A myslel som ze pouziva na to bzuciak v budikoch.