FML: Inokatsu Colt 1911A1 functions check sale fail :(
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- PLEASE READ THE DESCRIPTION!
NOTE: This is an airsoft video!
So this was a video I was recording because I had a buyer lined up for my Inokatsu Colt 1911A1 full steel CO2 GBB pistol.
My gun is brand new in box, never fired. So I assumed it was fine, right.
Fortunately the buyer asked me to do a functions and firing test before sending it over.
And that's when I realized, this gun is the worst pistol I have ever bought... Period.
#1. Safety issue. If you cock the hammer, engage the safety, hold in the grip safety and pull the trigger, then take it off of safe, the hammer will drop. Not expected behavior and very dangerous too. Unfortunately this is a known problem on KJW 1911s (which the INO is based on) and it stems from there being too much play between the parts in the gun.
#2. Light striking. How the hell do you make a CO2 powered gun and then put in a too weak hammer spring? :o
Got half-powered shots when test firing initially. Fixed by putting a BB under the hammer spring.
#3. The death blow... The friggen slide catch pops out of place when firing due to recoil. WHAT?!
I am so over this gun I am almost ready to go throw it in the trash man... :-(
#FML
Hope you guys enjoy! Please remember to subscribe, like and share!
Website: www.nonexistent...
TH-cam : / cjawesome83
Facebook : / nxairsoft
Twitter : / cjawesome83
Instagram : / cjawesome83
Google+ : www.google.com/...
Yep, Many people have told me the gun isn't worth buying but I still want one.
That's a glorious sound. Oh man, I just can not see myself paying full price for that thing.
It's really loud on CO2, I can tell you that much. But still not worth it :p
The design of the magazine killed my interest on this model. R.I.P.
Yeah, and it's an overpriced piece of sh*t :-p
Check out the Cybergun/KWC 1911 series instead, much better value for the price! :-D
th-cam.com/video/x61AtbRp_Z0/w-d-xo.html
th-cam.com/video/I7sYRODjA90/w-d-xo.html
@@CJAwesome83 I just bought the KWC 1911 CO2 with parkerized finish. Looks really most authentic to me.
its steel..i easily can fix the problems. The zink alloy shits are totally garbage. I had 3 model (umarex,cybergun,kwc)..they looks cheap, sounds cheap.
@@twistedmusicvideos2845 All that steel does not help with that ugly magazine design...
I’d buy this purely for fiddling with, the sound of that slide, hammer and trigger reset is rather realistic, and the fkn noise on co2 is epic
That’s the sound of freedom!
*American bald eagle screeching*
:p
#1 should happen if they are mimicking the actual 1911, the grip and thumb safeties are active safeties, meaning they only block when not in the proper position. Unless you are saying if you pull the trigger and hold the grip safety at the same time, then release both and afterwords disengage the thumb safety, and the hammer releases. Then that is a malfunction.
Otherwise it is mimicking the control function of the series 70 and prior 1911. I can't speak on the Series 80 with it's safety plunger and lever. I have zero experience with them as they are A. Not as common as Series 70, B. those that do have series 80 pistols in my experience retrofit them to a series 70 FCG when they have a trigger job done.
If the former, that is perfectly safe and done on purpose.
Hi there. I love your videos, especially the CAM870 instruction videos, which helped me a lot, when I tried to reassemble my M model. One thing I miss though, and that goes for basically every video I have seen, is a glimps down the barrel, especially models like the Inokatsu. I am a sucker for realism and the inner barrel is where most softairguns comes short. But thanks again for your videos :)
:)
Thank you for uploading the video about defects.
Is there any way to prevent the slide stop part from escaping?
My INNO 226 isn't any better, it's been a constant headache since I've got it, I've had to mill the frame several times In order to allow clearance for real steel components as the oem ones failed. It's astonishing how shitty they perform for the price. Inokatsu clearly didn't expect anyone to be foolish enough to skirmish it haha.
Dang, that's tragic :(
Tm or we p226 betta
Try stretching the magazine spring, the additional pressure sometimes help slide catch work better.
I will give that a try. It almost seemed like the gas magazine worked OK but the CO2 one didn't. But then again the gas mag has about half of the recoil so...
The pistol needed more time to get it right and i believe they are now just a collector's item but i'm sure you could get a good smith to correct these problems.
gorgeous pistol. glorious idea. shitty resault. Glad to see you.
shitty result by the original manufacturer yes.
@@majormassenspektrometerby most airsoft mfgrs
at 1:32 i was like "oh, so it's not airsoft" and i kept watching just to enjoy a great gun but then he pulled out these mags and i was like "wait WHAT?!"
Sorry to disappoint.
nah, u shouldn't be! I didn't think it is possible to make an airsoft pistol sound like that) it's amazing
OK, kewl. Glad you got something out of it at least :D
That Metal on Metal slide...
Know something crazy I found a couple of these online for 1000-1500 usd but on some airsoft forum a guy sold his for like 350, someone is one lucky bastard 😂
The original release was around $850 - $1000 USD and a limited production run that was hand finished, which this one is. A few years later Cybergun released a new mass produced version at a much lower price of $350 USD, which is probably the one the guy on the forum bought. So nothing lucky about it, except waiting and not paying an insane price for this piece of sh*t pistol :-p
10 shots so? more realistic
Where did you get it
Is this thing still for sale out of interest?
Maybe the slide notch just kicks the slide stop down, as seen at 5:03. Combined with a weak mag spring, it can't lock properly. Maybe if you put a buffer on the recoil spring guide (like a steel shim + rubber shim, KJ 1911s have them) to reduce the slide travel JUST a few millimeters it may work. You may not be able to powerstroke the thing after this tho.
If firearms can lock on the last round, meh, it's gotta be weak springs !
Good tips, thanks!
I can see the recoil spring through the slide. Is this normal? Is it allow to use KJW Co2 mag?
Yes, a small gap between the slide and frame is normal. And yes it can use KJW CO2 magazines.
But what if i fix all parts schim etc upgrade with maple leaf hop unit key maple leaf 60+ diamond bucking and crazy jet barrel then it would shot lite over 50 meters away with 0,25. or is there outher problems also not stated? Also Do WE co2 and Green gasers 1911 magg fitt this?
Don't think WE 1911 magazines fit in this. And even if you did all those fixes to this I still think it's a terrible purchase.
How much
best video on youtube, 100% feel you... not. Inokatsu sold these only to europe and the US and it was some nice cash crap, it only worked though until all 100 pieces were sold because otherwise they would not have sold em to retailers.
Yeeeh. I still have nightmares about this one...
Still want to buy this gun ! What is your price ? :)
Well a brand new one is 860 USD plus shipping so around 900 USD. I'll sell you this one for 700 USD :p
Problem is international sales will not work out due to logistics and shipping cost so :(
Jesus this whole brand seems like its not to be trusted... A lot of people complaining about their M4's, 1911's, and their P226's (and I'm sure much more).
Yeh, overpriced bullshit company IMO. Never again. :|
Only thing they got going for them is that their guns are steel.. (externally for the most part atleast)
no harm but my glock vfc umerex17 with enhanced recoil spring is absolutely amazing sounding when the slide is released ,as close to the real glock sound and relise as you can get ,just get a enhance recoil spring.
it is so worth the £20 quid or whatever it cost if you are a collector and can,or wont buy one of these
over priced pistols (cost more than the real steel counterparts depending on the make)get a vfc enhanced recoil spring guide snappy is a under statement without the price ps i think this looks shit,again for the price ..
Is it full metal?
It's full steel.
how much is it in US? in here its 950$
I don't know about the US. But if you look around you should fine it from anywhere between $350-$1000 USD depending on the site. :o
I do not recommend buying it though :p
it is steel. I should make a lock for green gas magazine so it could hold only seven rounds like IRL. enough gas, more visual realism (:
It's a terrible product, stay away!
Sensasional
inacatsoup!!!!!
Think I might have preferred to have a cat in a soup over this thing :p
Damn you still have this hunk of junk? ^^
But I have to say, you did a pretty good job with the finish. Still not worth the price tag in my opinion. The backside of the slide still looks pretty damn rough. Damn, Inosucksu... lol
Yeah well nobody wants to buy it from me. I wonder why? :p
Non Existent Well, your honest videos are a PITA for selling this POS. xD ;)
Yeah, I am kinda stupid like that. Always too honest :p
How much are U selling it for?
Selling it for $700 USD :0
still available? where are you located
It is. I am located in Sweden. Send me a message on FB at facebook.com/NXAirsoft if you want to discuss it.
Haha i was able to buy one for 200€.. man, thats terrible..
Every single thing on that thing is just bad. What were they thinking?
They should be very ashamed of themselves. I'll see if i can use some pieces from it or but otherwise i'll sell it for 25€ in a couple of days.. its not even worth that..
Wauw just wauw thats just plain ripping people of.
I'm getting 3 good shots and the other 6-7 are slow.
The slide is as loose as it can be
I knew i could be bad but this?
Yeeeh... Worst airsoft purchase I ever made :|
New edition 2015? or old
Nah not the new edition one.
Original batch but not Deluxe Edition.
Oh thx
酷🆒噢,$$$
A grand for an unreliable piece of pitted steel? The texture looks shitty. Gun doesnt function 100% Ill get a real 1911 for the same price.
Yes and no..
Yes and no what? :o
Dude....too much over exaggeration...I couldn't go deaf when shooting a real steel Glock 19 and a para ordnance 1911... don't get me wrong I like airsoft but it's sound is nothing compare to real steel...
I can't recall exactly what I said but I don't think I compared it to neither shooting a real gun nor going deaf but I did say it was loud and it was, for me at least, borderline that I wanted ear protection.
@Non Existent you did say its powerful to make you go deaf , 4:05, but nonetheless still like your video, liked!
In that case I was being sarcastic :p
But it is loud.