Thanks for the video. Just curious, I assume it would be ok to use that Distrubution block with an AMD CPU on a Crosshair Hero VIII? I'd just need to bend the tubes to the CPU differently?
can you make a video step by step making that thing.I Know you already did that,but im still new at setuping it. And i love the style i think i will buy it. Can you make a video how to install the tube cause im scared might get wrong while installing it. for future references.
Sweet build. I just put together my first build ever with the Conquer case. Took some time, as the instructions aren't as clear as you could want, and it felt like I was assembling the case around the guts even as I was assembling the guts! She's a pretty beast, but nowhere near the watercooled light show y'all got goin' on! I'm curious about that big white block thing installed between the motherboard and the front of the case. I'm guessing that's the above-noted waterway block pump. It fit the space available so well; was it a custom job? How much did THAT set you back?
Com um PC que custa o preço de um carro, o cara coloca a pasta térmica em forma de rosca no processador, talvez achando que vai espalhar perfeitamente. Vai formar bolha e não vai conduzir calor para o watther cooler. Prejú.
Having this case and a custom loop here are a few mistakes you made (I would know... I made them too). First off The front facing fans are cut off from air because of that plate since you instaled them on the outside. I know there is very little choice because the PSU is blocking the rear and the front plate doesn't have any holes to allow air flow however the best solution is to put the fans on the INTERIOR of the case pulling air in. You have a 30mm rad so it should work fine even with that distro. The top fans are also aimed in the wrong direction, it's pulling air up, I get you're trying to pull away the hot air but it's much better to have it pull air down. I've tried both directions and pulling air down gives better temps. Albeit you have more dust to deal with. You installed the PSU with the fan aiming up... This isn't a case specific thing, it's just common sense to aim the PSU down if you are able to, especially if you have watercooling. One leak and forget about your PC, your house is on fire.. Everything else is fine and however you choose for it to be, thus the essence of a custom build. Though if you made this for me I'd dissemble it and optimize it as I wrote above. This case has so much potential but you made a predictable custom loop that has a few inefficiencies. 7/10. (Most points goes to your cable management)
@@karllexter5484 My point still stands though, that 240mm rad is angled to a degree that perfectly allows liquid to pour into it if by the off chance either fitting starts to leak. It was a poor choice to go with that specific PSU, albeit it does look cool.
@@Newtonius_Richthoten can you share your PC Build to us Please.. Because I'm Planning to Build a Gaming PC. Upon Reading your Comment you know a lot on this kind of build and i need some suggestion... Thank You..
The camera he uses to video is amazing! I can see the dust specks in front of the case, floating away.
Absolutely magnificent build! I subbed cause I'm in awe!
Thank you so much!
pcs can be art and this is proof of that
Indeed! Thank you!
ម។ បន
For an under 1000subs channel this is a really beautiful content.
Brilliant build my friend you will be so proud of it, thanks for sharing
Awesome work mate, looks very good. one of my dream PC. I just sub to you!!
Thank you!
AWESOME !!!!!!!!!
That Arctic Storm is so nice, probably the best looking gpu on the market (well was on the market)
it is the best pc i bave ever seen
Thank you!
Sick!!!!
Super clean, awesome build
Thank you!
Beautiful PC!
nice and tidy. love it
Thank you!
wish there was links cause Imma steal ur pc. really good job.
i will buy it
@ADVANTI how do you take off the orange panel on the case?
I'm hesitating to buy the case because of that orange panel ...
@@alaeelkhali9400 I bought the case and the orange side panel can be removed with 3 screws
Sorry not doing it for me... but thank you for sharing the video build...
Well done, looks DOPE!!
Whats the music you put in the vid?
😱 wowww 👌👌👌🍺👍
Thank you!
Buying this case for my Ryzen 3 and GTX 980ti
hermoso trabajo
NICE👍
Thank you!
Awesome looking machine.
Thank you!
If you don't mind me asking, if I where to build this pc, can I change out diffrent parts or does just the ones you used work?
Thanks for the video. Just curious, I assume it would be ok to use that Distrubution block with an AMD CPU on a Crosshair Hero VIII? I'd just need to bend the tubes to the CPU differently?
if i make air cooler version of this case would i have dust problem?
Your computer would have just as much dust.
But it will be less cooler if you only just use fans.
Is rly beautiful.. I like it.. Only one question.. How many add memory m2?..
wish they made this case with support for dual 140mm vents not just 120
y donde colocas mas discos duros si quieres ampliar??...
How much does it cost for this package?
so unique!
Makes me anxious how everything is inclined
can you make a video step by step making that thing.I Know you already did that,but im still new at setuping it. And i love the style i think i will buy it. Can you make a video how to install the tube cause im scared might get wrong while installing it. for future references.
Super awesome video! and the music makes me inspire. so i will buy all the pc parts. is that all the things to build that awesome pc build.
how to change the rgb colors so that i can design my background for it.all the RGB ok
Where i can buy it ???
Hubieras puesto los accesorios en amazon para poder comprar
I have almost the same pc but with a bit more custom watercolling.It is SOO MUCH BETTER than a regular box PC
Same I have a pc like this buts it’s also a little better and more custom this guy should do better.
How much this cost?
Sweet build. I just put together my first build ever with the Conquer case. Took some time, as the instructions aren't as clear as you could want, and it felt like I was assembling the case around the guts even as I was assembling the guts! She's a pretty beast, but nowhere near the watercooled light show y'all got goin' on!
I'm curious about that big white block thing installed between the motherboard and the front of the case. I'm guessing that's the above-noted waterway block pump. It fit the space available so well; was it a custom job? How much did THAT set you back?
5:25 what is it
It looks like an Asus Rog Thor 850watt PSU
Com um PC que custa o preço de um carro, o cara coloca a pasta térmica em forma de rosca no processador, talvez achando que vai espalhar perfeitamente. Vai formar bolha e não vai conduzir calor para o watther cooler. Prejú.
How much it costs?
Where can i buy and u can build for me ??
how much is this setup?
Hö ist the waterblock called exactly? Nice video✌️👍
Got ir but ho Long are the Extensions
I would buy this to play rocket league only
Мнеб такую машину для стримов)))
how much the price ?
A lot
Cougar case....
now put 3080 on this beautiful case. if u can
Why i9 9900k ? Ryzen 3900 or 3950 better and colded
more cores doesn't automatically mean better
because i9900k is better than shit
Because for extreme end systems Intel is sligthly better than AMD. AMD is def the low to high end chartbuster
Price
guessing around 4 lakhs 50 K
+1 sub
Thank you so much!
Having this case and a custom loop here are a few mistakes you made (I would know... I made them too). First off The front facing fans are cut off from air because of that plate since you instaled them on the outside. I know there is very little choice because the PSU is blocking the rear and the front plate doesn't have any holes to allow air flow however the best solution is to put the fans on the INTERIOR of the case pulling air in. You have a 30mm rad so it should work fine even with that distro. The top fans are also aimed in the wrong direction, it's pulling air up, I get you're trying to pull away the hot air but it's much better to have it pull air down. I've tried both directions and pulling air down gives better temps. Albeit you have more dust to deal with.
You installed the PSU with the fan aiming up... This isn't a case specific thing, it's just common sense to aim the PSU down if you are able to, especially if you have watercooling. One leak and forget about your PC, your house is on fire..
Everything else is fine and however you choose for it to be, thus the essence of a custom build. Though if you made this for me I'd dissemble it and optimize it as I wrote above. This case has so much potential but you made a predictable custom loop that has a few inefficiencies. 7/10. (Most points goes to your cable management)
th-cam.com/video/At3K353lCjY/w-d-xo.html
It was meant to be like that. Thats why they put the screen and led lights.
@@karllexter5484 My point still stands though, that 240mm rad is angled to a degree that perfectly allows liquid to pour into it if by the off chance either fitting starts to leak. It was a poor choice to go with that specific PSU, albeit it does look cool.
@@Newtonius_Richthoten can you share your PC Build to us Please.. Because I'm Planning to Build a Gaming PC. Upon Reading your Comment you know a lot on this kind of build and i need some suggestion... Thank You..
nice pc dude but thats gonna make my wallet disaapearrrrrrrr
جم سعره ؟!
Why am i feel the musicm
A big shit without benchmarks and too much expensive indeed.
My conquer paint cost me a 1150$
so expensive
lol
تجميعات pc رخيصة لو سمحت ما عندكم واتس
Kind of looks like a cougar ripoff
My pc is better
No
But can it run crysis?