Marion, I'm in Australia, and I just love watching your videos, you are so entertaining, I'm also a card maker but I love to just watch you work, I love how normal to are. Some of your sayings fit into our cu.ture here, it's like someone from home!!
I have never enjoyed a card video the way I enjoy yours. Thank you for the laughs I needed that. You show your mistakes and you laugh about them. You are hilarious! Love your videos.
Love these! For large stamps, sometimes if you put it face up, ink it and gently lay the cardstock over the stamp, you can use your fingers to get complete coverage. I’d try that before completely giving up on it. I have several sizes of the mats from Waffle Flower. Basically, they are a photo polymer stamp. Works so well and easy clean up. I use my silicone mat when I use paint or glue because they don’t stick on the silicone. I don’t know if you can get cardstock to stick. Another tip: when inking a stamp with multiple colors, start with lightest and go from there. This will reduce cross contamination. 😉.
Cardstock and stencils are meant to completely stick to the grid mats. You really only need half the large size of the sticky mat. I still have old Cricut mats cut down to size in my MISTI and other platforms as they’re different sizes. Another way to use a small sticky mat is line up your inks to your right side and use the inks to blend and pop the tops back on when you’re finished. That way you don’t lose time removing the lids, picking them up, etc. Hope these tips are helpful-I’m just passing on trial-and-error ideas!
I have had this problem with a few stamps. I used the fine sandpaper & sanding block to keep the sanding depth uniform. I gently sand over the area that will not transfer the ink. Wipe the sanding completely of the stamp. I have found success with these stamps taking & transferring the ink well. I had one stamp that the surface was not uniform in depth & I found I needed to sand over the entire stamp to bring the stampin surface more uniform in depth. They are working well now. Just a suggestion. I have also experimented with temporary stick tape to hold a paper to the stamping tool base. This may leave some tape residue on the base but it is easily removed.I hope these ideas will help you.
I purchased some very cheap cricut cutting mats,and I use them for stamping,cut them down,when start losing sticky I give it a quick rinse and good t go again.Thanks for sharing a very informative video ❤😊
Lovely cards… thanks for the acknowledgment on the idea of cutting the sticky grid to size and the demonstration of other ideas… nice hearing you enjoy your demos…
On these large Altenew stamps they tend to get air bubbles when being picked up by your stamping platform door. Try putting the stamp on the platform & and taping your cardstock to the platform door & see if it stamps. Picket Fence studios has a thin sticky mat that might work with that platform you are using. You don’t want to go too thick or it will wear your door hinge area & warp your door eventually I love your experiment videos💜💜
A "plucked ostrich" ??? You kill me, woman! 😂😂😂. I love your videos, I love how happy you are when your results please you, all chuffed with yourself - as you should be. You make such beautiful designs 😁 Maybe you should contact altenew and let them know about the defective stamps?
😂😂😂 honestly, I was so proud of myself 😂😂😂 I was going to contact Altenew but as I’d bought it from SBC I thought I’d better go back to the, they were great about it, said they’d not had any other complaints, so could have been a one off 🤗🤗🤗
Love your videos….I have that leaf stamp also….will try what you did….I love your laugh. I am also an ex smoker….none since 1993….thank you for everything you teach us ❤️
Love the cards. I especially love the leaf stamp....I will not buy it, I will not buy it... oh heck, I'm going to buy the stamp! 😂😬 Thank you for another great video.
Marion-I live your videos! Not only do I learn from you, but they are fun! I really like your first idea best-the one with the acrylic cut-out. It’s quick, easy & inexpensive!
Love both cards. The second splatter one is favourite, just gorgeous. As always a real fun video, wish you would do more pretty please. Thanks Marion and have a beautiful day. PS the waffle flower mat is quite thick too. Hugs xxxx
I also thought about a silicone mat, but was concerned it would be too thick. I wondered if maybe they didn't go with a silicone mat because that might be too similar to altenew's stamp wheel?! That's also part of the reason why I haven't ordered this setup just yet. I feel like it's close to being a great thing, but I believe that they may make changes to it... Much like Misti has been tweaked over the years. I even told Bill about my crazy 🤪 ideas. I really like the idea of the spin attachment, but don't really need the stamping setup. I keep hoping they'll just sell the stamp and spin bit. 🤷🤞🤞🤞 That was fun! Thanks for trying all of the different things. Love it!!! ❤️
Thanks hun, I think they’re going to have new attachments in time, you can just buy the spin bit, but need the base to put it in or get Bill to knock something up 😜😜😜 🥰🥰🥰
Hi Marion, If I'm have trouble with a stamp that doesn't print in certain areas, I usually put a little piece of card in that area between the stamp and platform or stamp block I'm using. I find it works most of the time, hope this helps. Loving your tutorials, keep up the good work. X
Oh Marion, you are a ‘hoot’🎉 I just wanted to share with you that I also have experienced the problem of a stamp not stamping well inside a stamping tool when on different surfaces. My craft desk is very sturdy and doesn’t have any give to it. But while at a crop my stamps didn’t work well because of the table I was on. Many facilities supply nice folding tables but they often are not very flat and can cause major issues during stamping. I was lucky because I had used the stamp previously and it worked well. I now will test them on a kitchen counter or very study surface. Happy crafting!😊
Sometimes with the larger stamps a bubble can form between the stamp and the surface it’s mounted on! Also maybe try placing the stamp on a flat surface up, then ink your stamp your paper on the inked stamp and burnish on the paper! I hope it works for your stamps!
You are such a hoot, Marion! I always enjoy watching you. You seem to have so much fun, no matter what you are working on. I love your cards. I'm going to have to give this a try. Thanks for all of the fun!!
I was also told that you always must season your stamps before using or you just won’t get a clear image right away. Either rub your finger over entire thing or use eraser. Another way is stamp with versamark, stamp, clean then use your ink! Might work for you!
Exactly-that’s very helpful! Use a cheap gum eraser or the suggestion from Linda above. It really makes a difference, especially large photopolymer stamps.
I was so pleased to get a mention Marion! It’s great that we can learn from each other. I love the cards you made. Have you tried the stencils and dies without the stamp you can’t get to work? I bet that would still look great x
I should have asked you first 😂😂😂😂 I love sharing what others suggest. Yes I’ve used those, they are beautiful, I struggled with the stencils in the lining up, I do have a video th-cam.com/video/syWXto-xNms/w-d-xo.htmlsi=0OgCRLwpRwvjfybq I’m sure it’s this one, I think I struggled then with the stamp, I can’t remember now 🤷♀️🤷♀️🥰🥰🥰
I solve this problem by using a larger piece of cardstock with tape, cut down after stamping and use the scraps for white die cuts or small sentiment stamping. I have never gotten cardstock to stay in place on my MISTI! I have used the Altenew stamping platform that can be rotated and that works wonderfully.
I use a silicone oven mat. Bought many years ago. It came rolled up in a tube. Works well if you keep it clean. No tape but you do need to be careful. Mine had one inch grid on one side. Been using pieces of it for years.
I was told to season new stamps before you use them with an eraser to remove whatever the coating is. It has worked well. Don't know if it would have made any difference with the Altenew stamps but worth a try for new stamps. That Jofy stamp was really lovely. Haven't heard of that company.
Thank you Wendy 🥰 oh Paperartsy are fabulous, great company with great designers, SSS sell a lot of their product, unfortunately, I checked this one but they no longer have it. 😢😢🤗🤗🤗
2 beautiful cards - love your enthusiasm and your abilities to laugh at little card errors - I’m like that also - just came across your channel and subscribed after enjoying this video- learned some creativity from you today♥️♥️♥️
Marion have you tried adding some cushioning under the paper when stamping a polymer stamp. Since there is no foam under it like a red rubber stamp? That may help with it stamping better.
I was not sure about you at first - but I grown to love you and your videos. I love to hear you talk in your UK accent and words. I love that you show mistakes and then make something so great out of them. I just wanted to tell you I have the black Stampin up mat that you tried. I find if I'm not in my craft room it dries out and it is not sticky. So if you use a wipe or even just a damp cloth it should bring the sticky back. Again just wanted you to know you have such a fan in me - I have learned so much from watching you. Bebe
Great video! When working with clear stamps on my Tim Holtz platform, I have cut a (same size) thin foam pad to set on the base, under my paper. Of course my paper doesn’t stick to it, but it really improves the stamp impression.
Marion, there’s a very old Stamp trick from more than 25 years ago. If you cannot get a stamp in this case, the large stamp to stamp the image evenly and it’s light in some areas we used to sit a catalog underneath whatever substrate or paper we were stamping on and by using an old catalog, it would stamp the image perfectly so it’s kind of like adding a stiff sponge so that it will, take the image as improperly as it is better on a giving surface better than a hard surface so you could try that stamp that large stamp that you have that doesn’t stamp evenly and you could try to stamp that on top of something like a large catalog or something that gives and you could put that silicone mat right on top of a catalog or something but something not a hardcover book you want something that’s going to give and you can try that stamp that way and you will probably get it to work
@@marionemberson it’s not the photopolymer mat that comes with the stamp wheel. At least, I don’t think it comes with it. It’s thin plastic like other sticky mats, but it is sticky on both sides.
@@marionemberson I try not to miss your show of cards you are fun to watch and I can't miss someone who has so much fun making them I am just starting and I am 71.years young thanks Marion
Hello Marion, I watch you all the time, but I shouldn't because you no good for my weak bladder, maybe if I watch you without the sound, and I 1 can't hear you might be better, then I wouldn't be laughing so much, you are such a scream, just love how your cards turn out. Marion can you give me the full name of that waffle mat and where you purchased it through as I'd love to get one. Never give up your card making as your my entertainment, 😂😂😂 Jenny. Australia
😂😂😂😂😂 sorry about that. The mat was Altenew 9 x 12 grip mat, I’ve just searched for it in Australia, I hope this helps atcraft.com.au/products/altenew-9x12-ultra-sticky-mat-grid 🥰🥰🥰
Love everything you do and you do make me laugh on all your videos. I’ve just watched this one and wondered if you had tried Tim Holtz grip mats, I’ve just bought a couple and cut them up and they really do hold everything that I’ve tried including cardstock. I know it’s another outlay but if they work might not have to keep buying the sheets, just another idea to try. Keep up with the experimental artwork they do look absolutely amazing ❤
@@marionembersonbrilliant idea, I hope you are able to find something that does work for you and I look forward to hearing all about it in your next video. ❤
I do love watching you, you lift my spirits! The cards are lovely too! Just had a thought! Do you think your defective stamps might work if you use them with the waffle mat? You might be able to press the stamp into it.
Love your videos. When using big stamps. Sometimes air gets stuck under the stamps anf they will not stamp properly. I"ve found that if you put the stamp on a table, ink the stamp them put your paper on the stamp instead of the usual stamp on the paper. This has worked for me with big stamps. Good luck
I had the same problem with a large stamp. If you position your stamp ,then take the stamp position er top off . Then ink up your stamp place the paper on top of the stamp, then use a braver or one of those round stampable tool that you use on top of your platform. It will stamp a full image. Just be careful not to move your paper. I just through of something else that might work. Is use a sticky mat place your stamp on the bottom face up,than tape you paper to the top of the plate and add pressure. I’m going to try it and see if that works. I’ll let you know.
Es la primera vez que veo un video suyo y lo que me gusta,es que no se rinde,y nos podemos reir un poco de las muchas intentonas,pero usted sigue adelante,como dino hubiese pasado nada.Otra persona,hubiese deshechado el video.Asi que vere alguno otro,porque asi se me hace mas facil pensar,que no se me entinte a la primera vez,no pasa nada,que le oasa hasta a las artistas.....( Aunque yo use uno cuadrado,y fue mi real primera vez en ese chisme)🎇🎇🎇🎆🎆🎈 Enhorabuena por encontrar el tapete blanco!
Thank you, it’s how I do all my videos, I’m not about perfection, see my response to your comment about my inking on a previous video. 🤗🤗🤗 I don’t like to stress myself over the small stuff 😍😍
I absolutely love watching you and your videos. You always always always provide a laugh or a chuckle, no matter what the subject. just like you did here with the sticky mat and covering it with the acetate instead of cutting a piece to the size you need. Well, now it’s my turn to give you a laugh… I’m watching this video and I’m wondering why you are speaking so slowly and the words just don’t sound right coming out of your mouth, I thought to myself, self, is she drinking? well of course you are not drinking, I had my playback speed slowed down because I was watching a tutorial earlier today. Put it back to normal and you soundfantastic. Thanks for being you! 💜
I have the leaf stamp…I did a lot of smooshing.stamping.splattering on some watercolor card and then die cut…turned out great. Thanks…I think if you can find a thin grip mat, that would be great…have the stamp platform also. It is very versatile
Just beautiful, I feel just the same about matching cardstock. I have used wow card with water then I flatten it in my die cutting machine. I'm waffling! What I would like to know can you recommend a really white watercolour card please. Xxx
Ohh yes, I should remember to do that !!! Thanks for the reminder. Oh I really struggled with white watercolour card, the best I got is the Tim holtz one, I hope that helps 🥰🥰🥰
I managed to get some stamps to work fully/better by placing padding under the piece im stamping on. Padding = layers of paper, or a tablet, and letting it sit a bit longer. Those are beautiful stamps arent they? Its interesting that a silicone mat would hold paper down, as silicone mats are meant to release whats on them. I have one i picked up from temu, that does have two different textures on either side. I thought the one would hold it in place more, but after a year it doesnt. Perhaps time changes the composition of it? like oxidizing metals? I dont use that stamping device, in fact i havent seen it before, however, i have a suggestion. Get a bottle of aileenes tack it over and over glue. I use it for the mat on my electric cutter machine. you can apply a thin coat, let it dry to the tacky stage. I also use it on stamps that wont stick any longer. When it stops working, take a paper towel sprayed with some 70% alcohol and lighting rub over the surface and it will be tacky again. Works on the stamps too. Its worth a try as the bottle goes a long way. You can also make your own tacky dots of various sizes on wax paper, or parchment etc. I used to use it years ago, like the 90's? to put on the back of fabric painted designs and then attach them to my blouses. I used to teach watercolor on fabric painting classes once a week, and would just put them on the same T each week, as it saved me the cost of one T each week, always painting on a T for the class.
Thanks so much for those tips. I’m sure I have some Aileene’s somewhere 🤔🤔 I never thought of using alcohol on my silhouette mats, that’s fab and I’m going to try tacky dots. Thank you 🥰🥰🥰
I have had good luck lightly sanding stamps that have spots that miss, just keep checking it until you get a good impression. Might be worth trying since right now they're unusable anyway?
Fabulous results! I love the flower…too bad it's not available ( or is that good for me that I can't buy it). Why don't you try using the Scrapbook stencil first and then try stamping over it. The missing parts might not be so noticeable. Keep up with your cunning plans. You make them work out in the end and give us a few giggles along the way. 🩵🧡💜
M, on the Tim Holtz version of the platform, the lid reverses to stamp thicker rubber stamps, which is the side I use with my Altenew mat. Does the lid on this platform allow for that? The Tim Holtz version has a label on each side indicating which side you are using and I couldn’t find any info on this platform to say it reverses to accommodate rubber and clear stamps, or tell from the pictures if it is labeled. Your card is lovely and I enjoyed this experiment video. TFS!
Love your videos, you always have me chuckling away. Have you considered using a cricut sticky mat? You've inspired me to get one of these platforms. I couldn't stretch my budget to one of these so I've purchased Craftstash version. Fingers crossed 🤞I get some good results! X
Oh that’s a good idea, thanks Becky, I didn’t know craft stash did a version 🤔🤔🥰🥰🥰 Out of curiosity are you the Becky hedges that won the wow powders, I drew the names on my community page, but never heard back 🥰🥰🥰
@marionemberson yes they do a version. It's very different to the Sizzix one in looks but it fitted more in with my budget for now. As for the Wow powders, I would have to be honest and say I genuinely don't know. I missed the announcement of winners 🙈
I actually like them both, I prefer that the overall size of the stamp wheel is smaller, but I prefer that I can control how much I can turn the wheel, I hope that makes sense 🥰🥰🥰
I love your videos and we share the same favorite color families. May I ask if your mailing address is posted? I'd love to send you a card and someone should make a sentiment that says "dut dut dut da" because I love it when you say it talking thru something!
Marion, I'm in Australia, and I just love watching your videos, you are so entertaining, I'm also a card maker but I love to just watch you work, I love how normal to are. Some of your sayings fit into our cu.ture here, it's like someone from home!!
Awww thank you 🥰🥰🥰
I have never enjoyed a card video the way I enjoy yours. Thank you for the laughs I needed that. You show your mistakes and you laugh about them. You are hilarious! Love your videos.
You are so welcome! Thanks for being here 🥰🥰
Lovely cards Marion. Side note, for your hands try Castor Oil. Works wonders. Thanks for always having fun when doing your videos.
Thank you. 🥰🥰🥰
The Tim holtz media grip mat. It's grey and comes in a tube. Beautiful cards xx
Thanks Donna 🤗🤗🤗
Love these! For large stamps, sometimes if you put it face up, ink it and gently lay the cardstock over the stamp, you can use your fingers to get complete coverage. I’d try that before completely giving up on it. I have several sizes of the mats from Waffle Flower. Basically, they are a photo polymer stamp. Works so well and easy clean up. I use my silicone mat when I use paint or glue because they don’t stick on the silicone. I don’t know if you can get cardstock to stick. Another tip: when inking a stamp with multiple colors, start with lightest and go from there. This will reduce cross contamination. 😉.
Thanks so much for all the tips, I really appreciate them 🤗🤗🤗
Cardstock and stencils are meant to completely stick to the grid mats. You really only need half the large size of the sticky mat. I still have old Cricut mats cut down to size in my MISTI and other platforms as they’re different sizes. Another way to use a small sticky mat is line up your inks to your right side and use the inks to blend and pop the tops back on when you’re finished. That way you don’t lose time removing the lids, picking them up, etc. Hope these tips are helpful-I’m just passing on trial-and-error ideas!
I have had this problem with a few stamps. I used the fine sandpaper & sanding block to keep the sanding depth uniform. I gently sand over the area that will not transfer the ink. Wipe the sanding completely of the stamp. I have found success with these stamps taking & transferring the ink well. I had one stamp that the surface was not uniform in depth & I found I needed to sand over the entire stamp to bring the stampin surface more uniform in depth. They are working well now. Just a suggestion. I have also experimented with temporary stick tape to hold a paper to the stamping tool base. This may leave some tape residue on the base but it is easily removed.I hope these ideas will help you.
@@edithshaw2473 thanks so much Edith, I’ll get me some sand paper 🥰🥰🥰🥰
@@KathySparkle1 thanks so much Kathy and apologies as I’ve only just seen your comment 🫣🫣🥰🥰🥰
I purchased some very cheap cricut cutting mats,and I use them for stamping,cut them down,when start losing sticky I give it a quick rinse and good t go again.Thanks for sharing a very informative video ❤😊
That's a great idea! Thank you 🥰🥰🥰
Lovely cards… thanks for the acknowledgment on the idea of cutting the sticky grid to size and the demonstration of other ideas… nice hearing you enjoy your demos…
Thank you for your suggestion, I love sharing what people suggest it’s how we all learn 🥰🥰🥰
On these large Altenew stamps they tend to get air bubbles when being picked up by your stamping platform door. Try putting the stamp on the platform & and taping your cardstock to the platform door & see if it stamps. Picket Fence studios has a thin sticky mat that might work with that platform you are using. You don’t want to go too thick or it will wear your door hinge area & warp your door eventually
I love your experiment videos💜💜
Thanks so much for that info Berta 🤗🤗🤗
A "plucked ostrich" ??? You kill me, woman! 😂😂😂. I love your videos, I love how happy you are when your results please you, all chuffed with yourself - as you should be. You make such beautiful designs 😁
Maybe you should contact altenew and let them know about the defective stamps?
😂😂😂 honestly, I was so proud of myself 😂😂😂 I was going to contact Altenew but as I’d bought it from SBC I thought I’d better go back to the, they were great about it, said they’d not had any other complaints, so could have been a one off 🤗🤗🤗
Love your videos….I have that leaf stamp also….will try what you did….I love your laugh. I am also an ex smoker….none since 1993….thank you for everything you teach us ❤️
Thank you, have fun playing 🥰🥰🥰
Love the cards. I especially love the leaf stamp....I will not buy it, I will not buy it... oh heck, I'm going to buy the stamp! 😂😬 Thank you for another great video.
😂😂😂 that’s exactly what I sound like, enjoy it 😜😜🤗🤗🤗
There’s a die for it, too … 😂
@@99zanne yay!
@@99zanne yes, it comes with it, I love it 😊😊😊
Marion-I live your videos! Not only do I learn from you, but they are fun! I really like your first idea best-the one with the acrylic cut-out. It’s quick, easy & inexpensive!
Glad you like them! Thank you 🥰🥰🥰
Lovely stamps, “love,love,love” when you blend on the stamp as you do. Thanks for your time again Marion, it’s always great to see your vids 😊
Thank you so much Bea 🤗🤗🤗
I love those stamps and the way you added colour thanks for being an inspiration and being great fun to watch x
You are so welcome! Thanks for being here 🥰🥰🥰
Love these cards and really enjoy your humour ❤
Thanks so much! 🤗🤗🤗
Love both cards. The second splatter one is favourite, just gorgeous. As always a real fun video, wish you would do more pretty please. Thanks Marion and have a beautiful day. PS the waffle flower mat is quite thick too. Hugs xxxx
Thank you so much Mandy, that was my fav as well 🥰🥰🥰
The leaves are beautiful 🤩
Thank you, yes, I love them, I have the butterflies as well now, so need to use them 🥰🥰🥰
I also thought about a silicone mat, but was concerned it would be too thick. I wondered if maybe they didn't go with a silicone mat because that might be too similar to altenew's stamp wheel?! That's also part of the reason why I haven't ordered this setup just yet. I feel like it's close to being a great thing, but I believe that they may make changes to it... Much like Misti has been tweaked over the years. I even told Bill about my crazy 🤪 ideas. I really like the idea of the spin attachment, but don't really need the stamping setup. I keep hoping they'll just sell the stamp and spin bit. 🤷🤞🤞🤞
That was fun! Thanks for trying all of the different things. Love it!!! ❤️
Thanks hun, I think they’re going to have new attachments in time, you can just buy the spin bit, but need the base to put it in or get Bill to knock something up 😜😜😜 🥰🥰🥰
Hi Marion,
If I'm have trouble with a stamp that doesn't print in certain areas, I usually put a little piece of card in that area between the stamp and platform or stamp block I'm using. I find it works most of the time, hope this helps. Loving your tutorials, keep up the good work. X
Thanks for sharing Janice, I’ll give that a go 🥰🥰🥰
Oh Marion, you are a ‘hoot’🎉
I just wanted to share with you that I also have experienced the problem of a stamp not stamping well inside a stamping tool when on different surfaces. My craft desk is very sturdy and doesn’t have any give to it. But while at a crop my stamps didn’t work well because of the table I was on. Many facilities supply nice folding tables but they often are not very flat and can cause major issues during stamping. I was lucky because I had used the stamp previously and it worked well. I now will test them on a kitchen counter or very study surface.
Happy crafting!😊
Thank you 🥰🥰 I tried it on my kitchen surface as well, the only way it’s worked is by putting the card on top and brayering it 🙈🙈🥰🥰🥰
Sometimes with the larger stamps a bubble can form between the stamp and the surface it’s mounted on! Also maybe try placing the stamp on a flat surface up, then ink your stamp your paper on the inked stamp and burnish on the paper! I hope it works for your stamps!
Thanks so much, I’ll give that a go 🤗🤗🤗
You are so much fun Marion! I love your videos!
Thank you so much! 🥰🥰🥰
Hi Marion, you have created two beautiful cards I love them both but the leaves are just gorgeous. Thank you for sharing 😊xx
You are so welcome Kay 🥰🥰🥰
You do make me laugh!! Great fun and lovely cards ❤
Oh thank you! Glad you liked them 🤗🤗🤗
Always you make me giggle. Thx for trying out other’s ideas and being our guinea pig! You are the best!
You are so welcome! 🥰🥰🥰
You are such a hoot, Marion! I always enjoy watching you. You seem to have so much fun, no matter what you are working on. I love your cards. I'm going to have to give this a try. Thanks for all of the fun!!
Thank you so much Carol 😍😍😍
Love the two cards! 🌺
Thanks so much 🥰🥰🥰
I do enjoy your personality, makes me wish you lived in the states and close by, I think you would be a blast to craft with!
Awww thank you 😍😍😍
I was also told that you always must season your stamps before using or you just won’t get a clear image right away. Either rub your finger over entire thing or use eraser. Another way is stamp with versamark, stamp, clean then use your ink! Might work for you!
Exactly-that’s very helpful! Use a cheap gum eraser or the suggestion from Linda above. It really makes a difference, especially large photopolymer stamps.
Thanks Linda, I also use sellotape but sometimes go racing in and forget… I’ll try and remember 🤗🤗🤗🤗
Thanks Kathy 🤗🤗🤗
Definitely try cleaning the ALTeNEW stamps really good, then try using versamark embossing ink then wipe that off and your stamps shouldn’t work fine.
@@ConfederateDixieDarling thank you, I’ll give that a go 🥰🥰🥰
I just want to be your friend. You make me laugh and you don’t take yourself too seriously! Love your videos and beautiful cards.
Thank you so much Karen, I really appreciate that 🤗🤗🤗
I was so pleased to get a mention Marion! It’s great that we can learn from each other. I love the cards you made. Have you tried the stencils and dies without the stamp you can’t get to work? I bet that would still look great x
I should have asked you first 😂😂😂😂 I love sharing what others suggest. Yes I’ve used those, they are beautiful, I struggled with the stencils in the lining up, I do have a video th-cam.com/video/syWXto-xNms/w-d-xo.htmlsi=0OgCRLwpRwvjfybq I’m sure it’s this one, I think I struggled then with the stamp, I can’t remember now 🤷♀️🤷♀️🥰🥰🥰
I solve this problem by using a larger piece of cardstock with tape, cut down after stamping and use the scraps for white die cuts or small sentiment stamping. I have never gotten cardstock to stay in place on my MISTI! I have used the Altenew stamping platform that can be rotated and that works wonderfully.
Thanks Kathryn, yes I have the Stampwheel and I really like that, I feel like I’m going to flit to and fro 🤗🤗🤗
I use a silicone oven mat. Bought many years ago. It came rolled up in a tube. Works well if you keep it clean. No tape but you do need to be careful. Mine had one inch grid on one side. Been using pieces of it for years.
That's a great idea! Thank you 🥰🥰🥰
I was told to season new stamps before you use them with an eraser to remove whatever the coating is. It has worked well.
Don't know if it would have made any difference with the Altenew stamps but worth a try for new stamps.
That Jofy stamp was really lovely. Haven't heard of that company.
Thank you Wendy 🥰 oh Paperartsy are fabulous, great company with great designers, SSS sell a lot of their product, unfortunately, I checked this one but they no longer have it. 😢😢🤗🤗🤗
Thank you for giving me a chuckle tonight! Absolutely love your videos 😂
So glad you enjoy them 🤗🤗🤗
Marion, Would love to see you explore that leaf set.
I think that may be my next video 😜😜🤗🤗🤗
2 beautiful cards - love your enthusiasm and your abilities to laugh at little card errors - I’m like that also - just came across your channel and subscribed after enjoying this video- learned some creativity from you today♥️♥️♥️
Awww thank you so much, I really appreciate that 🥰🥰🥰
I believe all of you had clever ideas and I love the fact that there’s a variety of options for all of us!!!
Thank you for sharing these ideas!!!
I love hearing everyone’s ideas, even after crafting since I was a little girl (trust me that’s a long time ago) I still learn from others 🥰🥰🥰
Marion have you tried adding some cushioning under the paper when stamping a polymer stamp. Since there is no foam under it like a red rubber stamp? That may help with it stamping better.
Thanks Lisa, I’ll give that a go 🤗🤗🤗
@@marionemberson let me know if adding a little cushioning under you big stamp
I was not sure about you at first - but I grown to love you and your videos. I love to hear you talk in your UK accent and words. I love that you show mistakes and then make something so great out of them. I just wanted to tell you I have the black Stampin up mat that you tried. I find if I'm not in my craft room it dries out and it is not sticky. So if you use a wipe or even just a damp cloth it should bring the sticky back. Again just wanted you to know you have such a fan in me - I have learned so much from watching you. Bebe
Thank you Bebe, I’m glad you stuck with me 😜 and you’re enjoying the videos. Thank you, I’ll give that a try 🤗🤗🤗
Great video! When working with clear stamps on my Tim Holtz platform, I have cut a (same size) thin foam pad to set on the base, under my paper. Of course my paper doesn’t stick to it, but it really improves the stamp impression.
That's a great idea! Thank you 🥰🥰🥰
you crack me up. so down to earth.
Thank you 🥰🥰🥰
Marion, there’s a very old Stamp trick from more than 25 years ago. If you cannot get a stamp in this case, the large stamp to stamp the image evenly and it’s light in some areas we used to sit a catalog underneath whatever substrate or paper we were stamping on and by using an old catalog, it would stamp the image perfectly so it’s kind of like adding a stiff sponge so that it will, take the image as improperly as it is better on a giving surface better than a hard surface so you could try that stamp that large stamp that you have that doesn’t stamp evenly and you could try to stamp that on top of something like a large catalog or something that gives and you could put that silicone mat right on top of a catalog or something but something not a hardcover book you want something that’s going to give and you can try that stamp that way and you will probably get it to work
Thanks Denise, I’ll try that 🥰🥰🥰
Oooo, I like that leaf stamp
It’s lovely isn’t it 🤗🤗
Beautiful cards Marion ❤
Thanks so much 🤗🤗🤗
Once again, brilliant results Marion 👏
Thanks so much 🥰🥰🥰
The Altenew thin mat for the stamp wheel maybe? It is sticky on both sides.
Ahhh, I have the Stampwheel, I didn’t think to try that mat, not sure if it’s thinner that the 9” x 12” I’ll give it a try, thank you 🥰🥰🥰
@@marionemberson it’s not the photopolymer mat that comes with the stamp wheel. At least, I don’t think it comes with it. It’s thin plastic like other sticky mats, but it is sticky on both sides.
@@dawnmulder3540 ahh that makes sense, thank you 🥰🥰🥰
Your so much fun to watch Marion ❤ your videos and cards are beautiful as always and uts good to see you trying different things to see if they work
Thank you so much Myra 🤗🤗🤗
I have a stamp platform similar to yours. The lid has one side for clear stamps, flip it over and the other side is for red rubber stamps.
Ahh I didn’t know that, I’ll have a look, thank you 🥰🥰🥰
They turned out lovely! Great video.
Thanks so much! 🤗🤗🤗
I had the worst day, and watching you lifted my spirits so much (as always)!!!! 😊 Love the stamp technique, too!
Awww I’m sorry you’ve had a horrible day, I hope things get better 🤗🤗🤗
@@marionemberson thanks! You are so sweet. Today was better. 🙂
@@dawnmulder3540 🥰🥰🥰
.very nice cards thanks had fun with you 😂❤
Thanks so much, glad you’re here 🤗🤗🤗
@@marionemberson I try not to miss your show of cards you are fun to watch and I can't miss someone who has so much fun making them I am just starting and I am 71.years young thanks Marion
@@sjofngeirdal9631 oh that’s fabulous, thank you for being here and you’re never too old to start anything. 🥰🥰🥰
@@marionemberson thank you Marion
If you have a misty, waffle flower sells a mat that fits perfectly
I do, thank you 🥰🥰🥰
Marion, I love both of your cards ! 😊
@@qtem1 thank you 🥰🥰🥰
beautiful cards
Thanks so much! 🥰🥰🥰
Love the cards!
Thank you 🥰🥰🥰
Great advert for the Misti! 😂❤
😂😂😂😂😂
QHi Marion, apparently if you wash the factory coating off your stamps they should stamp well, give that a try. Regards Jenny
Thanks Jenny, I did try that, but happy to give it a better scrub 🥰🥰🥰
Always enjoy your videos Marion!!
I appreciate that Michele, thank you 🥰🥰🥰
Hello Marion, I watch you all the time, but I shouldn't because you no good for my weak bladder, maybe if I watch you without the sound, and I 1 can't hear you might be better, then I wouldn't be laughing so much, you are such a scream, just love how your cards turn out. Marion can you give me the full name of that waffle mat and where you purchased it through as I'd love to get one. Never give up your card making as your my entertainment, 😂😂😂 Jenny. Australia
😂😂😂😂😂 sorry about that. The mat was Altenew 9 x 12 grip mat, I’ve just searched for it in Australia, I hope this helps atcraft.com.au/products/altenew-9x12-ultra-sticky-mat-grid
🥰🥰🥰
Thank you Marion
Love everything you do and you do make me laugh on all your videos. I’ve just watched this one and wondered if you had tried Tim Holtz grip mats, I’ve just bought a couple and cut them up and they really do hold everything that I’ve tried including cardstock. I know it’s another outlay but if they work might not have to keep buying the sheets, just another idea to try. Keep up with the experimental artwork they do look absolutely amazing ❤
Thanks so much, I have the Ken Oliver grey may, so I’m going to give that a go 🤗🤗🤗
@@marionembersonbrilliant idea, I hope you are able to find something that does work for you and I look forward to hearing all about it in your next video. ❤
@@marionembersonI forgot to say Bumbleberrys are a good website for Altenew products, I hope that helps.
@@samanthagray7510 thank you, I still can’t find my Ken Oliver mat though 🫣🫣🫣🥰🥰
Love your videos!! Love your accent!!
Thank you so much Kathleen 🥰🥰🥰
I do love watching you, you lift my spirits! The cards are lovely too! Just had a thought! Do you think your defective stamps might work if you use them with the waffle mat? You might be able to press the stamp into it.
Thank you Anna, I don’t have the waffle mat and I’m trying not to buy anything else, she says sitting on her hands, 😂😂😂 🥰🥰🥰🥰
@@marionemberson it’s hard work not buying stuff!😂 I got muddled, I meant the Altenew sticky gridded mat that was see through.
@@annagray6491 ahh that’s a good idea, thank you 🥰🥰🥰
Love your videos. When using big stamps. Sometimes air gets stuck under the stamps anf they will not stamp properly. I"ve found that if you put the stamp on a table, ink the stamp them put your paper on the stamp instead of the usual stamp on the paper. This has worked for me with big stamps. Good luck
Thanks so much, I’ll give that a go 🤗🤗🤗
Hi Marion, have to say all these tools is taking up storage space me thinks😂 - thanks for sharing❤❤❤❤
Oh you’re not wrong there 😂😂😂🥰🥰
I can’t wait to get one of these, I would be trying the same things you hav3 tried already.
They are fun, enjoy when you get it 🤗🤗🤗
Great video! Love your cards and technique. You are a delight to watch😊
Thank you so much Elizabeth 🥰🥰🥰
I had the same problem with a large stamp. If you position your stamp ,then take the stamp position er top off . Then ink up your stamp place the paper on top of the stamp, then use a braver or one of those round stampable tool that you use on top of your platform. It will stamp a full image. Just be careful not to move your paper. I just through of something else that might work. Is use a sticky mat place your stamp on the bottom face up,than tape you paper to the top of the plate and add pressure. I’m going to try it and see if that works. I’ll let you know.
Thanks, yes the brayer one definitely works 🙋♀️🙋♀️ I’ll try your second suggestion, thank you 🤗🤗🤗
Glad to help
Am loving the Jofy stamp! ❤ It looks gorgeous (albeit too expensive for my pocket)!
It’s lovely isn’t it, that’s the trouble with red rubber they are dearer, but last forever 🤗🤗🤗
Es la primera vez que veo un video suyo y lo que me gusta,es que no se rinde,y nos podemos reir un poco de las muchas intentonas,pero usted sigue adelante,como dino hubiese pasado nada.Otra persona,hubiese deshechado el video.Asi que vere alguno otro,porque asi se me hace mas facil pensar,que no se me entinte a la primera vez,no pasa nada,que le oasa hasta a las artistas.....( Aunque yo use uno cuadrado,y fue mi real primera vez en ese chisme)🎇🎇🎇🎆🎆🎈 Enhorabuena por encontrar el tapete blanco!
Thank you, it’s how I do all my videos, I’m not about perfection, see my response to your comment about my inking on a previous video. 🤗🤗🤗 I don’t like to stress myself over the small stuff 😍😍
I love your videos
Thank you Sue 🤗🤗🤗
What if you kind of roll that big stamp instead of pressing it flat? Just thinking of a way to save that beautiful big stamp.🤔
That’s a great idea Jessica, thank you 🤗🤗🤗
I really enjoy your videos. You are a hoot!!!
Oh thank you! 🥰🥰🥰
I have the Tim Holtz Grey mat non-skid. It works great keeping cardstock still and it's not sticky.
Thank you, I have a Ken Oliver one, I’ll try that 🥰🥰🥰
I absolutely love watching you and your videos. You always always always provide a laugh or a chuckle, no matter what the subject. just like you did here with the sticky mat and covering it with the acetate instead of cutting a piece to the size you need. Well, now it’s my turn to give you a laugh… I’m watching this video and I’m wondering why you are speaking so slowly and the words just don’t sound right coming out of your mouth, I thought to myself, self, is she drinking? well of course you are not drinking, I had my playback speed slowed down because I was watching a tutorial earlier today. Put it back to normal and you soundfantastic. Thanks for being you! 💜
😂😂😂 that’s hilarious, yep, I promise I wasn’t drunk 😂😂😂🥰🥰🥰
I have the leaf stamp…I did a lot of smooshing.stamping.splattering on some watercolor card and then die cut…turned out great. Thanks…I think if you can find a thin grip mat, that would be great…have the stamp platform also. It is very versatile
Ohh sounds lovely, I feel like I just want to make loads of these 😂😂🥰🥰🥰
Some great ideas to get more from your tools, will definitely be trying some of these tricks with my stamping platform thanks xx
You are so welcome! Have fun 🥰🥰🥰
Just beautiful, I feel just the same about matching cardstock. I have used wow card with water then I flatten it in my die cutting machine. I'm waffling! What I would like to know can you recommend a really white watercolour card please. Xxx
Ohh yes, I should remember to do that !!! Thanks for the reminder. Oh I really struggled with white watercolour card, the best I got is the Tim holtz one, I hope that helps 🥰🥰🥰
Thanks as always marian, I'll give that a go xxx
@@JaneHarrison-lq1tf you’re welcome 🥰🥰
Altenew has a "Slim grip sticky mat" for rubber stamps. It's not as thick.
Ahhh I didn’t know that, thanks 🤗🤗🤗
I managed to get some stamps to work fully/better by placing padding under the piece im stamping on. Padding = layers of paper, or a tablet, and letting it sit a bit longer. Those are beautiful stamps arent they? Its interesting that a silicone mat would hold paper down, as silicone mats are meant to release whats on them. I have one i picked up from temu, that does have two different textures on either side. I thought the one would hold it in place more, but after a year it doesnt. Perhaps time changes the composition of it? like oxidizing metals?
I dont use that stamping device, in fact i havent seen it before, however, i have a suggestion. Get a bottle of aileenes tack it over and over glue. I use it for the mat on my electric cutter machine. you can apply a thin coat, let it dry to the tacky stage. I also use it on stamps that wont stick any longer. When it stops working, take a paper towel sprayed with some 70% alcohol and lighting rub over the surface and it will be tacky again. Works on the stamps too. Its worth a try as the bottle goes a long way. You can also make your own tacky dots of various sizes on wax paper, or parchment etc. I used to use it years ago, like the 90's? to put on the back of fabric painted designs and then attach them to my blouses. I used to teach watercolor on fabric painting classes once a week, and would just put them on the same T each week, as it saved me the cost of one T each week, always painting on a T for the class.
Thanks so much for those tips. I’m sure I have some Aileene’s somewhere 🤔🤔 I never thought of using alcohol on my silhouette mats, that’s fab and I’m going to try tacky dots. Thank you 🥰🥰🥰
@@marionemberson 😊 you are welcome.
I have had good luck lightly sanding stamps that have spots that miss, just keep checking it until you get a good impression. Might be worth trying since right now they're unusable anyway?
Thanks for the tip! I’ll give that a go 🤗🤗🤗
I bought light stick Cricut mat and cut it down. Get at least two out of one 12x12 mat.
Great idea, thank you 🥰🥰🥰
You could also put a bit of gold on the leaves too😅❤
Ohhhh that would have looked lovely, why do I never think of these things 😂😂🥰🥰
@@marionemberson lol just a thought 😂
@@kayenash5481 it’s a lovely thought 🤗🤗🤗
@@marionemberson 😜😃
Hi Marion I cut a Tim Holtz grey silicone mat to fit. It works beautifully so no need to purchase the Sizzix grid sheets
Thank you, I don’t have one of those, but I’ve just remembered to do have a Ken Oliver Grey one, I’ll see if that works. 🥰🥰🥰
If your stamps are new you know to condition them first. I use an eraser. I like the sticky mat
Thanks Judy, yes I did that, I also use sellotape as I always loose my erasers, I think they’re with all the odd socks 😂😂😂🤗🤗🤗🤗
Fabulous results! I love the flower…too bad it's not available ( or is that good for me that I can't buy it). Why don't you try using the Scrapbook stencil first and then try stamping over it. The missing parts might not be so noticeable. Keep up with your cunning plans. You make them work out in the end and give us a few giggles along the way. 🩵🧡💜
😂😂 see, I saved you money 😂😂 oh that’s a good idea, thank you 🥰🥰🥰
So gorgeous!!!!!!!
Thank you 🤗🤗🤗
Just a thought...could your sticky mats not stick well because they need to be cleaned first to take off manufacturers residue.
I must admit I do have glitter in the air here 😂😂 so maybe 🤗🤗🤗
What about using a gel plate
Ohhh didn’t think of that, they’re be a bit of give in it, just sure I have a big enough one 🤔🤔🥰🥰🥰
Love em ❤
Thank you 🥰🥰🥰
Try putting something underneath to bring it higher if you get my drift like a bit of hard sponge
That’s a great idea, thank you 🥰🥰🥰
What is the base "thing"? I don't think I've seen that before.
It’s the Sizzix stamp and stencil tool, I think I have it in the description 😍😍😍
M, on the Tim Holtz version of the platform, the lid reverses to stamp thicker rubber stamps, which is the side I use with my Altenew mat. Does the lid on this platform allow for that? The Tim Holtz version has a label on each side indicating which side you are using and I couldn’t find any info on this platform to say it reverses to accommodate rubber and clear stamps, or tell from the pictures if it is labeled. Your card is lovely and I enjoyed this experiment video. TFS!
Thanks so much, I really don’t think it does, but I’ll definitely be taking a look. 🤗🤗🤗
Love your videos, you always have me chuckling away. Have you considered using a cricut sticky mat?
You've inspired me to get one of these platforms. I couldn't stretch my budget to one of these so I've purchased Craftstash version. Fingers crossed 🤞I get some good results! X
Oh that’s a good idea, thanks Becky, I didn’t know craft stash did a version 🤔🤔🥰🥰🥰
Out of curiosity are you the Becky hedges that won the wow powders, I drew the names on my community page, but never heard back 🥰🥰🥰
@marionemberson yes they do a version. It's very different to the Sizzix one in looks but it fitted more in with my budget for now. As for the Wow powders, I would have to be honest and say I genuinely don't know. I missed the announcement of winners 🙈
@@beckyhedges9136 can you pop on my community tab and check, I can check later but I’m late for an appointment 🥴🥴🥴🥴🥰🥰🥰
@marionemberson I've just checked and it was me! I'm so chuffed 😊 Thank you so much. I'll send my details to your email. Thank you x
Hello from sunny hot Cyprus x x x
Ohhh lovely… we’re going back there in October, went this May and fell in love with it. Have fun 🤗🤗🤗
Bumbleberrys have the Billowing peonies stamp set in stock. Hopefully this was just a one off.
Thanks so much 🤗🤗🤗
Do you prefer this stamping platform over the wheel?
I actually like them both, I prefer that the overall size of the stamp wheel is smaller, but I prefer that I can control how much I can turn the wheel, I hope that makes sense 🥰🥰🥰
@@marionemberson it makes perfect sense…thanks
What is the brand of stamping platform?
It’s the new sizzex stencil and stamp platform I believe
Thank you Cindy 🥰🥰🥰
Hi, I’ve linked it in the video description 🥰🥰🥰
The silicone mats are “messy mats” I think🤔
Ah thank you Linda 🥰🥰🥰
I love your videos and we share the same favorite color families. May I ask if your mailing address is posted? I'd love to send you a card and someone should make a sentiment that says "dut dut dut da" because I love it when you say it talking thru something!
😍😍 thank you, please email me marionemberson@gmail.com 😍😍😍
The butterflies in your titles look like they're made of meat!
😂😂😂 definitely not, it’s embossing powder 🥰🥰🥰