As someone with a background in construction and general interest in building and creating things, hearing Lou narrate his ideas and workflow was excellent. Hopefully he can get a nice big shed/workshop for his tools one day!!
So glad you enjoyed the video :) And yes, a great workshop is a dream!! Thanks so much for spending some time with us this week, we wish you all the best with whatever projects you may have going on at the moment!
What an awesome idea for a Tiny Home. Wonder if u could put them on top of each other. I'd do a 40 ft on bottom & 20 ft top and left over roof space a deck. So cool.
I really enjoyed watching and hearing the process, especially the pointers on learning from previous builds… one question though is how do you address the cold bridges and associated condensation that your welded window and door frames must create?
I’m chasing down the Sunday morning chores, squeezing in a wild swim, and then I will spend the day in my kitchen catching up with produce from the greenhouse and the garden… making pickles, baking zucchini muffins, blanching & freezing green beans (so many beans), and making pasta sauce to freeze for winter (so many tomatoes). I know I will appreciate all of this come winter time although, truthfully, I can think of things that are much more tempting to do such as sewing, knitting, riding my bike, and other hobbies. With that said… I must admit that when I am not in the kitchen or outside… you know where I can be found? You guessed it… I’m in my office. Oh, the joy of having space to think, create, and organize one’s life!! I just know you both will love the luxury of a whole ‘nother container space that allows for all your creative enterprises. I’m going to watch today’s video later this evening when I can put my feet up and enjoy without interruption. This high school sewing teacher is getting ready to go back to school in two weeks so I must indulge in my Sunday evening pleasures while I still can. Two Sunday’s from now I will be packing my lunch and ironing my dress shirts… UGH!! Thanks for today’s great video. Lotsa Love, Ⓜary🇨🇦💦🍅
Thank you and what I enjoyed the most was the 'third time around' benefits which were thrown into the narration. A valuable reource for people currently planning any remote construction.
I would never have believed it was possible to do your own spray foam. I’m sure you would get good stats if you done a a detailed video of what you used and step by step guide of that process
In regards to the sealant and waterproofing stuff i I find that using too much makes it less sealed. Just like excessive silicon caulking when you use too much the wash gets destroyed and doesn’t last. It’s much better to just use the right amount and press in to the area being sealed and remove excess. In many years of experience I have noticed that over use of sealant causes the sealant to break down faster and lose seal. Don’t use too much everyone. Not only does it look bad but it effects the longevity of the seal!
Rather than creating a separate sealant post, I would like to add to this effort. I use this urethane based ILO the silicone type mainly because it's paintable. If you ever get silicone sealant on anything, it's a bear to get off and very difficult to get paint to stick to it. So, I fully agree with the above post. Enough is just the right amount. The excess can be rubbed away with a paper towel saturated with isopropyl alcohol solvent. If no alcohol, I have had really good luck with a one or two inch wide strip of plastic bag polyethylene, maybe a foot long for ease of use, or longer if no wind. After sealant is pushed into the fillet, lay the plastic strip down over the sealant and gently push it into the fillet. Sounds weird, but it works. A week later, pull the plastic strip off. It will come off easily once the sealant is cured.
We feel so blessed and grateful!! Especially with all the help along the way :) Thanks so much for the kind words and joining us on this building adventure! Wishing you a beautiful rest of your week, MaryAnn!
So my thought is that it would be better to use angle iron to build the window frames instead of the 3” plate steel that you did. 2 reasons. First it is more structural than the plate. Second it would create a nice flush frame on the inside that you can hide a ton of sealant behind. Thoughts?
Wow another great successful build again Lou, you really are very talented. The office container looks amazing and it is incredible to see the process with each stage in one video. Have a great week x
Ima chasing down the Sunday morning chores, squeezing in a wild swim, and then I will spend the day in my kitchen catching up with produce from the garden and the greenhouse… making pickles, baking zucchini muffins, blanching & freezing beans (so many beans), and making pasta sauce (so many tomatoes) to freeze for winter. I know I will appreciate all of this come winter time although, truthfully, I can think of things that are much more tempting to do such as sewing, knitting, riding my bike, and other hobbies. With that said… I must admit that when I am not in the kitchen or outside… you know where I can be found? You guessed it… I’m in my office. Oh, the joy of having space to think, create, and organize one’s life. I just know you will both love the luxury of a whole ‘nother container space that allows for all your creative enterprises!! Gonna watch today’s video later this evening when I can put my feet up and enjoy with interruption. This high school sewing teacher is getting ready to go back to school in two weeks so I gotta indulge in my Sunday evening pleasures whilst I still can. Two Sundays from now I’ll be packing my lunch and ironing my dress shirts… UGH!! Lotsa Love, Ⓜary🇨🇦💦🍅
I really appreciate every second of your time for making this video🙏. Honestly my opinion if you enjoy doing the foaming spray job go work for a week for free with some professionals and you will see you only needed some adjustments in your technic and that is it. I loved what you guys have done👍.
I am curious, will you paint the containers, or a cool airbrush, a painting like trees etc. on the outside. Would be maybe a fun project for Dana😊! I also think about the style of your tattoos for an outside design!?
Sorry… my lengthy comment appears twice. Oh, the joys of rural internet!! My first comment disappeared, so I typed it again and then both comments re-appeared. For some strange reason I am not able to delete one or the other. I guess I’ll just sum it up by saying that two comments means twice the video watching pleasure… haha!! Ⓜary💕
Haha well good thing your comment was so charming it was worth reading twice!! ❤ Wishing you lots of relaxation and enjoyment these two weeks before school starts back up again!! Big hugs from us
@@WildWeRoam northeast Washington state is on fire. I'm safe for now but the smoke has been awful. Raining now. Much improved. The sound of the pitter patter and hum of overhead airtankers is soothing. Many lost everything or are displaced. Tens of thousands of acres of destroyed forest not to mention the wild ones who called it home. I'm one of the lucky ones so far. It's 13 miles from me. It's all about the wind direction. Another in a string of human caused fires. As a society we must do better. We must be more vigilant and reduce our carbon footprint significantly. You know... ❤️
Wonderful to watch your work! It has turned out so good! The place I want to build this at does not have a big road access, I was wondering if I can dismantle and reassemble it to start with. What do you suggest?
I am a technical employee, I like technical work, I enjoy technical work # I am a construction electrical engineer # I am a professional technical welder # Implementation of all types of building water pipes # My country is in unemployment crisis, any person or construction company wants, I can become a good worker. I am ready . I enjoyed watching your interesting video
Awesome Lou! And helpers! So amazing to see all that you have learned, and it looks beautiful. I've had projects like this, that by the end you know so much, but then you're done! 😅 but of course you can carry most of what you've learned to other projects. Well done guys👍❤💚
It really is amazing how the knowledge we all get from doing various projects carries over in ways expected and unexpected to other projects, even years down the line :) Thank you for the kind and motivating words!! Wishing you all the best with whatever creative projects you have going on!! ❤
So glad you’re doing well. 👍 What do you think about the fires in Maui Hawaii, and there about? Where were you living when you were in Hawaii? Would you have been near that mess, had you not have moved?
Damn! You make it look easy and fast! You didnt even need fasteners like the Container Guy is selling. 😂 He doenst approve of this build. Good job bro.
Question and if this has been answered before just say so and I will look around. But why did you frame out to what looks like 6 inches away from the wall of the container?
This is so satisfying to watch LOL Super curious now that the three containers are (more or less) done, if theres a vid you would do on is there anything that you wish you would have changed or done differently throughout the whole process (ie add a window here or there, made a window larger/smaller, maybe have the connect or not in a different way, what projects to expect now that the three are built out, sooooooo curious! Congrats Lou and Dana!!!
See I would raise the floor slightly or have the whole thing raised up so there is a pocket under the whole container or flooring. I say this because I'd there is a pocket you can build a furnace that leads to the pocket of empty space, hot air would go into the space and heat the floor. Simple heated flooring that only requires to burn some wood
Heres a question for this, one i never see answered on any build. Are all windows available a standard size and you know what to cut or your order is already in and you have the paperwork that states the dimensions. Basic i know but i have to hear it
I once saw someone run there plumbing and electric on the outside insulating and putting a type of siding or cladding on the outside, it maximized the inside space, just a thought ...
💞💞💞I am a technical employee, I like technical work, I enjoy technical work # I am a construction electrical engineer # I am a professional technical welder # Implementation of all types of building water pipes # My country is in unemployment crisis, any person or construction company wants, I can become a good worker. I am ready . I enjoyed watching your interesting video❤❤❤💯💯💯
Here in my country, the technicians do it very differently, nothing frame on the inside, chipboard is attached with sheet metal screws, the screws are filled, from the outside a metal frame made of square tubes 30x30mm is welded all around the Countainer, sheets are welded at the bottom so that nothing gets in ants, moise, and water, then fill it with down plates, you know these green steropur ungaefer 50mm thick, these are also normally used when building houses then you can cover it with whatever you want, stone, wood, plaster To process plaster, use a wire mesh with holes ungaefer 50x40mm, these are welded, and over it a huener wire with very small holes, which is connected with wire, then throw a hand of plaster cement with sand on it, when it is dry, the cement sand and lime or white marble sand, you can also use finished plaster, in bags So you have clean space inside, oh don't forget a roof is built over the container, either with sheet metal or with original roof tiles, raw or yellow like sand color
I love it! I have a question about the walls. I’m curious about your choice for plywood over other materials like drywall. It’s aesthetic, efficiency, cost, longevity? Or like all of the above haha. I love how it looks I’m genuinely just curious about how you decided on design choices! I would like to hear more about both of your design ideas and plans. You both have a great eye. Great job! Alsooo the narration was fantastic. Thanks for sharing!
So... no electricity run through the walls?... but I'm sure you have a plan that will work. Plumbing too... I guess that's in another location. No need for a sink in the office I guess... Thanks for sharing this with us.
As someone with a background in construction and general interest in building and creating things, hearing Lou narrate his ideas and workflow was excellent. Hopefully he can get a nice big shed/workshop for his tools one day!!
So glad you enjoyed the video :) And yes, a great workshop is a dream!! Thanks so much for spending some time with us this week, we wish you all the best with whatever projects you may have going on at the moment!
What an awesome idea for a Tiny Home. Wonder if u could put them on top of each other. I'd do a 40 ft on bottom & 20 ft top and left over roof space a deck. So cool.
@@WildWeRoam For painting the outside since its not a straight wall using a broom with plastic strands would probably work the best.
I really enjoyed watching and hearing the process, especially the pointers on learning from previous builds… one question though is how do you address the cold bridges and associated condensation that your welded window and door frames must create?
I’m chasing down the Sunday morning chores, squeezing in a wild swim, and then I will spend the day in my kitchen catching up with produce from the greenhouse and the garden… making pickles, baking zucchini muffins, blanching & freezing green beans (so many beans), and making pasta sauce to freeze for winter (so many tomatoes). I know I will appreciate all of this come winter time although, truthfully, I can think of things that are much more tempting to do such as sewing, knitting, riding my bike, and other hobbies. With that said… I must admit that when I am not in the kitchen or outside… you know where I can be found? You guessed it… I’m in my office. Oh, the joy of having space to think, create, and organize one’s life!! I just know you both will love the luxury of a whole ‘nother container space that allows for all your creative enterprises. I’m going to watch today’s video later this evening when I can put my feet up and enjoy without interruption. This high school sewing teacher is getting ready to go back to school in two weeks so I must indulge in my Sunday evening pleasures while I still can. Two Sunday’s from now I will be packing my lunch and ironing my dress shirts… UGH!! Thanks for today’s great video. Lotsa Love, Ⓜary🇨🇦💦🍅
So amazing to see the containers come to life! Learning so much and loving seeing all Lou’s hard work. What a beautiful space.
Thank you so much, Elias and Mel! So happy you found the video informative :) Wishing you a wonderful rest of your week!!
Me too
Haven't you forgotten the electrics and lighting 🤔 that's usually laid behind the wall paneling.
I'm really very rarely ever nice to someone on the internet but you are a very nice guy!
You going soft on us?! Quick call someone a cunt or something before the rarity wears off.
Nice you got the idea to build the container home and learning the methods .....
Lou is the Humble Hero. He tries anything that comes up and he is very honest about his learnings!
Thank you and what I enjoyed the most was the 'third time around' benefits which were thrown into the narration. A valuable reource for people currently planning any remote construction.
I would never have believed it was possible to do your own spray foam.
I’m sure you would get good stats if you done a a detailed video of what you used and step by step guide of that process
In regards to the sealant and waterproofing stuff i I find that using too much makes it less sealed. Just like excessive silicon caulking when you use too much the wash gets destroyed and doesn’t last. It’s much better to just use the right amount and press in to the area being sealed and remove excess. In many years of experience I have noticed that over use of sealant causes the sealant to break down faster and lose seal. Don’t use too much everyone. Not only does it look bad but it effects the longevity of the seal!
Rather than creating a separate sealant post, I would like to add to this effort. I use this urethane based ILO the silicone type mainly because it's paintable. If you ever get silicone sealant on anything, it's a bear to get off and very difficult to get paint to stick to it. So, I fully agree with the above post. Enough is just the right amount. The excess can be rubbed away with a paper towel saturated with isopropyl alcohol solvent. If no alcohol, I have had really good luck with a one or two inch wide strip of plastic bag polyethylene, maybe a foot long for ease of use, or longer if no wind. After sealant is pushed into the fillet, lay the plastic strip down over the sealant and gently push it into the fillet. Sounds weird, but it works. A week later, pull the plastic strip off. It will come off easily once the sealant is cured.
Wow 🤩 it is Gorgeous the views are spectacular of the forest 🌳 your family is truly Blessed beyond measure
We feel so blessed and grateful!! Especially with all the help along the way :) Thanks so much for the kind words and joining us on this building adventure! Wishing you a beautiful rest of your week, MaryAnn!
AMAZING. And not only the result of the build itself, but your narrated step by step tutorial was fantastic. 🌟❤️🙏
Pretty dope!
Looks like you are losing a decent amount of space with the framing choice. Does it feel more cramped?
Great to learn from your experiences with this kind of build. Thank you for sharing. Very cleanly and clearly presented.
So my thought is that it would be better to use angle iron to build the window frames instead of the 3” plate steel that you did.
2 reasons.
First it is more structural than the plate.
Second it would create a nice flush frame on the inside that you can hide a ton of sealant behind.
Thoughts?
Wow another great successful build again Lou, you really are very talented. The office container looks amazing and it is incredible to see the process with each stage in one video. Have a great week x
Thank you so much, Lynne!! Those kind words are really nice to hear :) We wish you a wonderful week, too! x
I'm amazed, really. The dedication was beyond measure to getting it done.
Ima chasing down the Sunday morning chores, squeezing in a wild swim, and then I will spend the day in my kitchen catching up with produce from the garden and the greenhouse… making pickles, baking zucchini muffins, blanching & freezing beans (so many beans), and making pasta sauce (so many tomatoes) to freeze for winter. I know I will appreciate all of this come winter time although, truthfully, I can think of things that are much more tempting to do such as sewing, knitting, riding my bike, and other hobbies. With that said… I must admit that when I am not in the kitchen or outside… you know where I can be found? You guessed it… I’m in my office. Oh, the joy of having space to think, create, and organize one’s life. I just know you will both love the luxury of a whole ‘nother container space that allows for all your creative enterprises!! Gonna watch today’s video later this evening when I can put my feet up and enjoy with interruption. This high school sewing teacher is getting ready to go back to school in two weeks so I gotta indulge in my Sunday evening pleasures whilst I still can. Two Sundays from now I’ll be packing my lunch and ironing my dress shirts… UGH!! Lotsa Love, Ⓜary🇨🇦💦🍅
8:56 What a view that's going to be
Thank you so much for sharing this project & your suggestions in the process! ❤
Real nice content. I have a container project that has been on hold for a few years. I think I’m getting inspired.
Nice and calm with your narration, Lou!
Yes!!!🥳 I was waiting for this video!🤍 The shipping container office!
Yay! Glad you enjoyed it :-D
Another amazing job on your office container Lou. Blessings to your family.
Thanks so much--It's really so nice to always read your kind words encouraging us all this time!! Big hugs from us ❤
Wow! Phenomenal planning and attention to detail which clearly contribute to a professional and wonderful end-result.
Thank you so much, your comment has me beaming from ear to ear! Will definitely pass it along to Lou :) Wishing you a wonderful week, Melanie!!
Great video! Office looks beautiful, Lou. You do such a wonderful job 👏👏👏👏
I so would have appreciated a big picture view of the finished project.
Lou, terrific job ! You've done an amazing job on all of the containers.
Thank you so much, Sharon! Thats really kind of you to say ❤
Great build, nice result. I couldn’t quite follow how you fixed the windows into the metal frames.
I really appreciate every second of your time for making this video🙏. Honestly my opinion if you enjoy doing the foaming spray job go work for a week for free with some professionals and you will see you only needed some adjustments in your technic and that is it. I loved what you guys have done👍.
Hello, from Paris France ! Good Job !🤘😀🤟
Love to see the finished product❤
I am curious, will you paint the containers, or a cool airbrush, a painting like trees etc. on the outside. Would be maybe a fun project for Dana😊! I also think about the style of your tattoos for an outside design!?
Or maybe like a earthy matt colour and then grow vines on it - might look terrbile though lol. I kinda like their rustic vibe lol
Oh these are all such cool ideas!! Thank you both for sharing them ❤
Levels work great
Very informative.
Awesome. I can’t wait to see what you do with the exterior of the containers.
Yes, so many more projects to do! Excited about them too :) Thanks for the kind words, Susan!!
Excellent thank you for sharing 🙏 from Australia 💜
I really appreciate YOU for sharing I learning so much Thank YOU both again and CONGRATULATIONS 🎊
Ok that was pretty impressive!
Awesome Job, very inspirational
Sorry… my lengthy comment appears twice. Oh, the joys of rural internet!! My first comment disappeared, so I typed it again and then both comments re-appeared. For some strange reason I am not able to delete one or the other. I guess I’ll just sum it up by saying that two comments means twice the video watching pleasure… haha!! Ⓜary💕
Haha well good thing your comment was so charming it was worth reading twice!! ❤ Wishing you lots of relaxation and enjoyment these two weeks before school starts back up again!! Big hugs from us
I love the single pane non opening picture window. It'll last longer than windows that open and close too. Nicely done!
So glad you like it, we are so happy with it, too ❤ Hope you are having a really nice week!!
@@WildWeRoam northeast Washington state is on fire. I'm safe for now but the smoke has been awful. Raining now. Much improved. The sound of the pitter patter and hum of overhead airtankers is soothing. Many lost everything or are displaced. Tens of thousands of acres of destroyed forest not to mention the wild ones who called it home. I'm one of the lucky ones so far. It's 13 miles from me. It's all about the wind direction. Another in a string of human caused fires. As a society we must do better. We must be more vigilant and reduce our carbon footprint significantly. You know... ❤️
Quick, simple, brilliant!!! 👏💪
Wow, nice job!
Andersen Windows...NICE
So where did the solar vent on the roof connect inside? You didn’t have any holes in your ceiling. Was it the black vent tube in the wall ?
Wonderful to watch your work! It has turned out so good! The place I want to build this at does not have a big road access, I was wondering if I can dismantle and reassemble it to start with. What do you suggest?
nice job, but where is the electric?
Looks so good 😊
I am a technical employee, I like technical work, I enjoy technical work # I am a construction electrical engineer # I am a professional technical welder # Implementation of all types of building water pipes # My country is in unemployment crisis, any person or construction company wants, I can become a good worker. I am ready . I enjoyed watching your interesting video
Where are you located?
Another great job done looking great❤
So much enjoying and impressed
Great idea ❤
Great video, thanks but a question for you. Why didn’t you insolate on the outside then you would’ve had more room on the inside
Awesome Lou! And helpers! So amazing to see all that you have learned, and it looks beautiful. I've had projects like this, that by the end you know so much, but then you're done! 😅 but of course you can carry most of what you've learned to other projects. Well done guys👍❤💚
It really is amazing how the knowledge we all get from doing various projects carries over in ways expected and unexpected to other projects, even years down the line :) Thank you for the kind and motivating words!! Wishing you all the best with whatever creative projects you have going on!! ❤
Hi i like what you have done just one question why have you puþt the windows one end of the room as it is dark the other end love your channel
quick question. Did you keep the van or sell it? seems like a great tool for vacations when you need to get away from the land
Sorry if you've answered this already, but where do you get your storage bins?! I'm jealous!
THIS IS ABSOLUTELY INSANE!!!
So glad you’re doing well. 👍
What do you think about the fires in Maui Hawaii, and there about?
Where were you living when you were in Hawaii?
Would you have been near that mess, had you not have moved?
loved this video and build! So inspiring!
Thank you so much for joining us for this build :) And for the kind words!! ❤
Looks good
What about electrical and plumbing?
How much of a gap do you need for the frame vs the container walls?
Just a thought. Why not build the frame round the window and then weld the frame to the opening?
Damn! You make it look easy and fast! You didnt even need fasteners like the Container Guy is selling. 😂 He doenst approve of this build.
Good job bro.
Great job on your office speak!! ❤️❤️❤️
Question and if this has been answered before just say so and I will look around. But why did you frame out to what looks like 6 inches away from the wall of the container?
where did you get that electric roof vent from??
This is so satisfying to watch LOL
Super curious now that the three containers are (more or less) done, if theres a vid you would do on is there anything that you wish you would have changed or done differently throughout the whole process (ie add a window here or there, made a window larger/smaller, maybe have the connect or not in a different way, what projects to expect now that the three are built out, sooooooo curious! Congrats Lou and Dana!!!
Oh what a cool idea! There definitely are some things, like any project. Thanks so much, Chelsea 😀 Hope you are having a really nice Tuesday!!
See I would raise the floor slightly or have the whole thing raised up so there is a pocket under the whole container or flooring.
I say this because I'd there is a pocket you can build a furnace that leads to the pocket of empty space, hot air would go into the space and heat the floor.
Simple heated flooring that only requires to burn some wood
Great work!... What did it all cost?
Heres a question for this, one i never see answered on any build. Are all windows available a standard size and you know what to cut or your order is already in and you have the paperwork that states the dimensions. Basic i know but i have to hear it
Do the window frames get condensation?
Would it be easier to assemble the frame first and then weld the frame into the cutout, or is that more difficult?
just a question u didn't run any wiring for lights or power points before u put the plywood on ??? why.
Can I aask, how hard is it to weld container steel?
I once saw someone run there plumbing and electric on the outside insulating and putting a type of siding or cladding on the outside, it maximized the inside space, just a thought ...
💞💞💞I am a technical employee, I like technical work, I enjoy technical work # I am a construction electrical engineer # I am a professional technical welder # Implementation of all types of building water pipes # My country is in unemployment crisis, any person or construction company wants, I can become a good worker. I am ready . I enjoyed watching your interesting video❤❤❤💯💯💯
Why are the walls built out so far from the walls of the container? Aren’t you losing valuable interior space?
What was the spray insulation you used please ?
😂😂😂Soy Boy Plywood…said with a “lisp”
I’m literally laughing out loud
Here in my country, the technicians do it very differently, nothing frame on the inside, chipboard is attached with sheet metal screws, the screws are filled, from the outside a metal frame made of square tubes 30x30mm is welded all around the Countainer, sheets are welded at the bottom so that nothing gets in ants, moise, and water, then fill it with down plates, you know these green steropur ungaefer 50mm thick, these are also normally used when building houses
then you can cover it with whatever you want, stone, wood, plaster
To process plaster, use a wire mesh with holes ungaefer 50x40mm, these are welded, and over it a huener wire with very small holes, which is connected with wire, then throw a hand of plaster cement with sand on it, when it is dry, the cement sand and lime or white marble sand, you can also use finished plaster, in bags
So you have clean space inside, oh don't forget a roof is built over the container, either with sheet metal or with original roof tiles, raw or yellow like sand color
I love it! I have a question about the walls. I’m curious about your choice for plywood over other materials like drywall. It’s aesthetic, efficiency, cost, longevity? Or like all of the above haha. I love how it looks I’m genuinely just curious about how you decided on design choices!
I would like to hear more about both of your design ideas and plans. You both have a great eye. Great job! Alsooo the narration was fantastic. Thanks for sharing!
Should have end wall of doors with storage and plumbing and electrical
Future solar panel closet
When will this be listed on Airbnb?
можно было сделать направляющие бруски прямо к контейнеру сваркой за счет потолочных крепежей для гипсокартона. тогда места было бы значительно больше
Is this a 20 feet or 40 feet container?
A recip or circular saw with the proper metal blade will work much better, cleaner, less mess, less burrs, and way faster and easier.
Once the conainer is framed is what is the actual floor space width reduced to?
So... no electricity run through the walls?... but I'm sure you have a plan that will work. Plumbing too... I guess that's in another location. No need for a sink in the office I guess... Thanks for sharing this with us.
I think you should stack a 40ft on top of the 3 containers you already have.
No electrical outlets?
Take piece pbc tape two nails place insulation should hold by friction
Why not inset sliding glass door with container doors for light and security
I would love for you to come help build my shipping container home😊.
Power boxes. Light cans,wall switches ?🤔
I envy you!
Where did the roof vent go?
I don't know if you have tried.i am not a frammer , ty a plumb bob for your doors. You can get them close enough.