Cute! Suggestions? - A bit more offset for the sprocket , so the jacket does not cling to the wall and can dry better? -Big holes with drillsaw or flat wood drill in the plank under the helmet for airflow (leave visor open) -2 vertical 30cm broomsticks for the gloves to fit on (better drying capabilities)
I love it. Your second iteration is awesome too. As a woodworker myself, what I’d change is I’d put some disposable gloves on to apply the stain. As a motorcycle rider I’d go to a wreckers or old repair shop and ask if they have any old handlebars with the grip still attached for the helmet peg. For the gloves I’d think a pair of poles (maybe the same handlebar) to slide each of them on to in case they are wet for any reason and it would allow them to dry faster. Love the sprocket, piston and chain link ideas. Nice build!
i see your key chain pushes the key off of the pin. Maybe you could put a stop on the end or a slight angle on the pin to stop that from sliding off and increasing the ease to plop the keyring on there
This looks really cool! It just seems like the Keys could slip off the masterlink pretty easily... To prevent that, you could try (glueing or just) putting an o-ring on the tip of the tiny metal part, which you put your keys on, so that they don't fall down when the wall or shelf somehow move a bit ((:
Great work! 😺 With the Masterlink: I would remove one of the metal „rods“ to screw the link on. And hammer the tip of the other one flat, so that the keys won‘t fall off (It happens with my Rack, and it‘s annoying). I recommend to buy working rubber gloves, so you don‘t need to clean your hands after each working session.
Interesting vid, chaos. I would've replaced the wooden block with a short brake level to hold the helmet, add some small cedarwood sticks under the helmet to refresh the inside. Replace the sprocket with a long clutch lever for jacket hook. Replace the chain link with an angled spark plug for key hanging. Add back the crank shaft to move the piston away from the wall for spacing. Anyway, ride safe, god bless u.
I see your video often and sometimes go back to your old videos and I always wonder how your not more know for the love you put in your video the always so high quality keep riding 😌
I wonder if the sweat from the helmet will moisten the stain over time. I just used two hooks to hang bikes in the garage for my shit. Pretty Cool though.
A tip boss man. On the key hanger you can put a small groove on it so that the key wont fall. Keep uploading! I also own a ktm duke 390 thats why i love watching your vids! #getduked
I struggle to get a proper place for my ear plugs, ear plugs box, disklock key, topcase key, garage door remote...both during rides and when I stop, at home or any other place. My jacket pockets are not always a safe place and I need a way to keep all this stuff together and secured. Except for the main bike key which has to be all by itself during the rides. Any idea ?
I was thinking in the same direction when I saw him operating the circular saw. Position of the hands was scary. Regarding gloves, you should not wear them when operating rotating power tools like drills, routers, circular saws …
You can add mirror. Just take older tire cut a mirror in circle with internal diameter of the tire and glue it on. And of course hang entire piece on the wall :-)
Drill holes under the helmut, so it can breathe.
i mean he probably wears it daily so no need
Cute! Suggestions?
- A bit more offset for the sprocket , so the jacket does not cling to the wall and can dry better?
-Big holes with drillsaw or flat wood drill in the plank under the helmet for airflow (leave visor open)
-2 vertical 30cm broomsticks for the gloves to fit on (better drying capabilities)
q
I love it. Your second iteration is awesome too.
As a woodworker myself, what I’d change is I’d put some disposable gloves on to apply the stain.
As a motorcycle rider I’d go to a wreckers or old repair shop and ask if they have any old handlebars with the grip still attached for the helmet peg.
For the gloves I’d think a pair of poles (maybe the same handlebar) to slide each of them on to in case they are wet for any reason and it would allow them to dry faster.
Love the sprocket, piston and chain link ideas. Nice build!
i see your key chain pushes the key off of the pin. Maybe you could put a stop on the end or a slight angle on the pin to stop that from sliding off and increasing the ease to plop the keyring on there
more like this please. hope you are recovering well since your crash. love from scotland
It should have your custom stickers for sure.
For sure, be a nice touch.
This looks really cool! It just seems like the Keys could slip off the masterlink pretty easily... To prevent that, you could try (glueing or just) putting an o-ring on the tip of the tiny metal part, which you put your keys on, so that they don't fall down when the wall or shelf somehow move a bit ((:
exactly what i thought when i saw the video! :D
This shelf needs a bike trouser shelf or something to keep bike trousers clean, and solo things for the boots
Put a grip on the rod the helmet sits on. You won't see it when the helmet is there but I think it would be cool anyways.
Great work! 😺 With the Masterlink: I would remove one of the metal „rods“ to screw the link on. And hammer the tip of the other one flat, so that the keys won‘t fall off (It happens with my Rack, and it‘s annoying).
I recommend to buy working rubber gloves, so you don‘t need to clean your hands after each working session.
Hey mate got a good hack my self to get bugs off- lay wet paper towels on bike/helmet wait 20mins or so then wipe off.easy.
3 days ago… i got the old version of this reccomended, and decided to watch it agian, and all of them, so glad u did this agian!
What about boots?, they also need somewhere to air off after a long ride.
This is your best, yet.
You're truly multi-talented, creative and amiable 😌
A Motorcycle BRAKE DISK!!!
(It will look NICE!!)
Interesting vid, chaos. I would've replaced the wooden block with a short brake level to hold the helmet, add some small cedarwood sticks under the helmet to refresh the inside. Replace the sprocket with a long clutch lever for jacket hook. Replace the chain link with an angled spark plug for key hanging. Add back the crank shaft to move the piston away from the wall for spacing. Anyway, ride safe, god bless u.
I see your video often and sometimes go back to your old videos and I always wonder how your not more know for the love you put in your video the always so high quality keep riding 😌
Maybe add CC logo on it? Would bring some color and look better when not in use:)
Maybe part of old handlebars or foot pegs for gloves to sit on and dry.
Cute ideas. Might just make one too
I’ve binged watched your channel all day and I’m not sorry
We’ll done man! Definitely taking some ideas for my garage as well.
More dirt bike vids 🙏🏻
OOH WOOOOOOOOOW AWESOME AMAZING FANTASTIC
I love the racio of the videos!! It fills my screen nicely
If you leave the outer plating holding onto the top pin vertically you can screw it to the wall instead of glue 👍
Looks cool, nice work
Add a Neodymium Magnet to the keychain holder, to stop your key ring sliding off.
I love it, very nicely done! 👌🏼
Nice build!
Is that’s art..👍🏾
Did anyone notice Yamaha keys!?😉 May be naked or super sport!?
Nice work!!!
i think you should have cut the chain masters lock in half and snapped it on for added support to the keys from falling
Ah something good to watch
I wonder if the sweat from the helmet will moisten the stain over time. I just used two hooks to hang bikes in the garage for my shit. Pretty Cool though.
I think you need a ducati key insted of the duke key would look better haha
I think the link should be at a bit of an angle so the key doesn’t fall off.
I want the same but I don't have a piston lying around lol.
That is awesome
You are so creative I like your style hope you merchandise come to India ❤️
when you said a few year ago i started to question my sense of time
Exquisite!!!
I struggle finding a good place to keep my leather pants. Maybe a solution for this could be a nice addition.
Missing stickers... Definitely stickers 🏁
Why do you have Yamaha keys? Yz don't use keys do they? And you only own a KTM🤔
You are awesome 🤟🔥🔥
Edit;- i can tell only by seeing ur thumbnail 😜
Definitely unashamed to say i will be copying this 90% and doing the recommendations from the comments ahaha
Bruh this would sell like hot cakes. Its cool
next clock from back sprocket?
Love from INDIA ❤
Put an old chain on there, so u have a "keychain"
love it .... need to perhaps make my own some time...anyone have spare piston?...local is lekker!!
A tip boss man. On the key hanger you can put a small groove on it so that the key wont fall. Keep uploading! I also own a ktm duke 390 thats why i love watching your vids! #getduked
good vid
Maybe a clock out of rear sprocket
Your logo + More bike parts
Need stickers!!!
Im guessing your hands dont go black everytime you touch this one unlike the last one and LEDs or a CC symbol or both could be added
did you buy a new yamaha or its just the old reserv key?
Amazing 🤩 take my money 💴
I struggle to get a proper place for my ear plugs, ear plugs box, disklock key, topcase key, garage door remote...both during rides and when I stop, at home or any other place.
My jacket pockets are not always a safe place and I need a way to keep all this stuff together and secured. Except for the main bike key which has to be all by itself during the rides.
Any idea ?
Following
Needs for you to put your logo on it man.
What Yamaha is that Key for? Or does the Dirt Bike have one?
He bought a mt09 again 😏
Hi
What use do you put your old bike chains to?
Add more led and bikeparts..
Would you take an order for one of this for me?!!👀
I would recommend you using safety gloves and glasses whilst working on these kinda projects.
I was thinking in the same direction when I saw him operating the circular saw. Position of the hands was scary.
Regarding gloves, you should not wear them when operating rotating power tools like drills, routers, circular saws …
Make one that can fit 2 helmets
Where are thos Yamaha keys from....?😏😏😏😏😏
What the model of you ls2 helmet?
Now I know that I am really good at Maths 😉
Thats a primary school knowledge, not high school :D
Bike stand for dirtbike please
6.55 think somone bought another yamaha
You inspired me to get a motorbike even though Im 12
Why you used yhamaha keys whit te sport helmet i know you sold the KTM are you getting another Yamaha?
👌👌👌
You can add mirror. Just take older tire cut a mirror in circle with internal diameter of the tire and glue it on. And of course hang entire piece on the wall :-)
🥰
Any one els noticed the Yamaha key
That is actually not high school math. It's 6th grade elementary school math. I know because my kids have now.just saying....
Bro led
Yamaha?🤨🤨
Cool video!!! Wow, you need to research P-R-O-M-O-S-M!!