Aight folks, since this is a loooong one and not every section is relevant to everybody, here are some timestamps for the sections :D 02:25 CAD 02:45 Tooling 08:33 Workholding 10:40 CAM (Toolpathing) 21:15 MACHINING! (Including cutting montage goodness)
Your channel deserve more subscribers my friend, you produce high quality videos. I learned how to use fusion 360 watching your video, thanks to that i was able to design a custom front panel for my case. Greetings from Brazil ^^
How do you prepare for the cutting in sequence? Can you post the model details of your machine and what, if any, installation considerations there are? Love the channel.
21:28 Would you be willing to give a reference to the actual tools on the sorotec.de shop? I'm quite new at CNC machining and still learning about the different kinds of mills/drills. You'd be helping me out a lot! Thanks.
Sorry if I missed it, what are the specs or part number for the thread cutter you use for the G1/4 holes? (I'm assuming it's 60 deg for BSPP 1/4-19), but would like to know what you like to use for that purpose.
What changes would you make if you're using extruded acrylic instead? I bought a decent amount of extruded acrylic long ago when I didn't know what I was doing.
Use larger tools with shallower cuts and lots of air and coolant, should be fine like that. The mirrored acrylic I use is extruded so had to get sort of used to working with it, cast is just so much better though.
Would it be feasible to make a distro plate out of borosillicate glass? I'd imagine it'd be a really difficult to CNC specific shapes out that material.
@@bittech1 Hello, I am a big fan of your channel. Could you please link or give a reference to the thread mill because I am having trouble finding one for the g1/4. Is the Datron 0068450 appropriate for it because there is no mention of bsp or withworth but the angle is 55 ?
@@bittech1 Hello, I am a big fan of your channel. Could you please link or give a reference to the thread mill because I am having trouble finding one for the g1/4. Is the Datron 0068450 appropriate for it because there is no mention of bsp or withworth but the angle is 55 ?
@@bittech1 Hello, I am a big fan of your channel. Could you please link or give a reference to the thread mill because I am having trouble finding one for the g1/4. Is the Datron 0068450 appropriate for it because there is no mention of bsp or withworth but the angle is 55 ?
@@bittech1 Hello, I am a big fan of your channel. Could you please link or give a reference to the thread mill because I am having trouble finding one for the g1/4. Is the Datron 0068450 appropriate for it because there is no mention of bsp or withworth but the angle is 55 ?
Alex could you please help me , when im cutting the G1/4 threads with my sorotec thread mill it goes up and not down to cut the threads do you know the solution please i hope you can help
Climb cutting will go to the bottom of the hole first and then spiral up, conventional cutting will spiral downwards into the hole. Is that what you meant?
@@bittech1 no i mean when i set the zero z hight and then start cutting the thread it goes up Just the movement it would do for the threads but it goes up instead of down
Soo... For a 2mm O-Ring diameter, we use a 1.3mm ( 65% ) deep but 2.2mm ( 110% ) wide O-Ring Groove? Would those percentage numbers hold true for any O-Ring diameter size or is this a 2mm specific one and does it hold true for any O-Ring material ( Nitrile, Silicone, etc... )?
hi what software do you use for your router i.e. ugs/source rabbit etc and if so how do you incorporate tool changes into your machine code through fusion?
COuld you make a distro plate for the corsair crystal 570x specifically one that goes on the side panel you see al the components on, I'm having some trouble making my own and am not liking the available options because many of them are just unbelievably over priced
Shame about the music : ( What I mean by that is, and every 'TH-camr' tends to do it, they replace everyday sounds with ridiculous music! I'm sure many viewers would much rather hear the CNC machine working away. I for one would of preferred hearing what that spindle sounded like, also, what's the sound of Acrylic when it's being machined? Putting aside my personal little grievances .................. What a fantastic video! Loads of great information ( thanks for the recommendation of the Datron & Sorotec milling bits ), I take it you're in the UK? I'm in France and it's always difficult to find quality parts here. Off to see the rest of your videos ; ) TURK T4 Concepts
Honestly I’m a bit torn between machine sounds and not having them. I watch a lot of machining channels where both are done so have no real preference. I will say though that my router sounds horrific cutting aluminium as the spindle is such a high pitch whine, which causes microphones to clip. It’s not that satisfying sound you get from the bigger machines or manual ones. I tried overlaying some before and it just made it unwatchable.
@@bittech1 Thanks for quick response mate, yeah, know what you mean ........ bit of both then!? sounds of spindle and background music? We can always alter the sound from our end. Just been watching your CNC machine being delivered, WOW that's a monster! I've got the 'WorkBee' CNC from Ooznest in the UK. Great cnc machine : ) I was just thinking ( watching your other videos ), that I was building custom made computers back in 1990 .................... 28 years ago!!!!! I'm getting old! ; ) TURK T4 Concepts
Can anybody point me at a site or company that does custom cnc milling re: distro plate? I checked back and forth and the only ones I can find are the big coms that do this. They charge like 300+ quid for a 148mm by 105 mm (A6 - yes, that's all I need) sized distro platelet which I designed in fusion360 and that's kinda doing my head in. Anybody knows some place that does it for more reasonable prices in the UK or anywhere else in the EU? US would be ok too, but that usually takes ages in shipping times, but I can live with that. Anybody can help me out here or point me to one? Much appreciated; thanks!
@@bytefoundry8702 I suppose you're right and I wouldn't mind like 200 quid (that's Euros and/or Pounds, so you have to add about 25-40% to that when converting to Dollars), but 396 for 10 by 14 cm is just a bridge too far for me. Not that I can't afford it, but it just doesn't make any sense to me to spend that much on a relatively small piece of plastic. Suppose I will get me one of those prefab ones, but none of those are in the size that I want. I'd nearly say that it would be cheaper for me to get me one of those Chinese desktop cnc machinelets and make one myself, as they are not even 200 quid. I'm not sure however whether those are capable to cut out 5mm in a 10mm plate. You perhaps have any idea if they are any good? Thank you for your reply btw!
Love the channel and topics but, it is so annoying to hear British people say aluminum incorrectly. Aluminum was created in the US we named it so the way we say it is correct. If England created something useful we would say it how you name it.
I think you need a history lesson rofl. Famous English chemist (and chairmain of the Royal Society) Humphrey Davy named the element, and even that only after his original "Alumium" was discredited. Not only that, it was discovered before then by a Danish physicist, and the first means of production by the French. Even further, Aluminium is the current primary spelling as dictated by IUPAC, with aluminum being an acceptable variant.
@@bittech1 and commercialized by Alcoa in the US by Charles Martin Hall. It's one thing to talk about it another to actually do it. All these other people had theory our guy had vision.
Aight folks, since this is a loooong one and not every section is relevant to everybody, here are some timestamps for the sections :D
02:25 CAD
02:45 Tooling
08:33 Workholding
10:40 CAM (Toolpathing)
21:15 MACHINING! (Including cutting montage goodness)
can you please tell me where I can buy acrylic for making a distro plate? I can't find it anywhere
I would appreciate it, if it's possible for you, to write down the exact Endmills / Tools that you use for acrylic and your aluminium working
Your channel deserve more subscribers my friend, you produce high quality videos.
I learned how to use fusion 360 watching your video, thanks to that i was able to design a custom front panel for my case.
Greetings from Brazil ^^
Thx for the Awesome how-to! Really finally need to get CNC now.. Just hyped to be able to do cool Distros (or similar) eventually!!
23:42 the cutting sound is impressive. I would love if my cnc would make such wonderful music 😅
Can't wait to get it into my build Alex! Epic work as always 🤘😎
I’ll be doing this soon. I’ll have to watch this video in the morning
Outstanding Modder and Channel!!
Great video and thank you to such a great tutorial clip. Can anybode share the links to the recommended drills he is using? Thank you in advance!
is there also a video of how this parts ended up? Thank you!
Game of Thrones, Avengers End Game AND this video in the same week?!... it's a good time to be alive!
How do you prepare for the cutting in sequence? Can you post the model details of your machine and what, if any, installation considerations there are? Love the channel.
Super cool I've just started looking at using thread mills
amazing, Shady!
너무 잘 봤어요:) 프로그램 짜는 영상 더 만들어주세요~!
Wow, massively impressed with this! Thanks so much!
Another great video, thanks.
how do you make the O-rings?
21:28 Would you be willing to give a reference to the actual tools on the sorotec.de shop? I'm quite new at CNC machining and still learning about the different kinds of mills/drills. You'd be helping me out a lot! Thanks.
Round the outside got me 😂 😂 😂
Datron has an office in New hampshire and I order my end mills from there (I'm in Canada).
im also using endmills from sorotec. The special acryl endmills are not cheap but they do the job so great!!!
Hi, do you by any chance know which thread mill is appropriate to do the g1/4 threads. Am new to this and having trouble finding the right one. Thanks
Sorry if I missed it, what are the specs or part number for the thread cutter you use for the G1/4 holes? (I'm assuming it's 60 deg for BSPP 1/4-19), but would like to know what you like to use for that purpose.
Great content bro keep it up 😊
Amazing!!!
What happened with the G 1/4 threads?
Do you have a video covering the wasteboard? I don't see many people using anything other than mdf as wasteboard
Brett Yup, try looking for “Bit-tech fixture plate”, that vid covers my making of this one.
Can you make a video on making a basic distro plate with a hand saw?
It’s on the cards to do in the future!
Autolike Enabled! MORE LIKE THIS PLEASE!!!.. tools, bits, setup, software everything! feed me!
Do you use the same thread mill for your g1/4 and sealing holes?
i need somewhere i can order a custom distroplate !
check out @Radikult he is making custom distro plates for a lot of cases, you can see his works on ebay: www.ebay.com/itm/223476853028
What changes would you make if you're using extruded acrylic instead? I bought a decent amount of extruded acrylic long ago when I didn't know what I was doing.
Use larger tools with shallower cuts and lots of air and coolant, should be fine like that. The mirrored acrylic I use is extruded so had to get sort of used to working with it, cast is just so much better though.
@@bittech1 okay cool. Good to know. Thanks
Hey Alex, great video could you tell me what kind of thread mill cutter you use? is it the sorotec m2,4-m4 one or a different one? thx
Would it be feasible to make a distro plate out of borosillicate glass? I'd imagine it'd be a really difficult to CNC specific shapes out that material.
Acrylic or polycarbonate... which should be considered? or does it not matter for this application.
Great video Alex. Could you do another video, a bit more specific to how you do the threads with thread mill for G1/4 ports? Thanks :)
NYC CNC has a great video set on threadmilling that might be of interest to you, G1/4 is just the same process with a whitworth mill
@@bittech1 Hello, I am a big fan of your channel. Could you please link or give a reference to the thread mill because I am having trouble finding one for the g1/4. Is the Datron 0068450 appropriate for it because there is no mention of bsp or withworth but the angle is 55 ?
@@bittech1 Hello, I am a big fan of your channel. Could you please link or give a reference to the thread mill because I am having trouble finding one for the g1/4. Is the Datron 0068450 appropriate for it because there is no mention of bsp or withworth but the angle is 55 ?
@@bittech1 Hello, I am a big fan of your channel. Could you please link or give a reference to the thread mill because I am having trouble finding one for the g1/4. Is the Datron 0068450 appropriate for it because there is no mention of bsp or withworth but the angle is 55 ?
@@bittech1 Hello, I am a big fan of your channel. Could you please link or give a reference to the thread mill because I am having trouble finding one for the g1/4. Is the Datron 0068450 appropriate for it because there is no mention of bsp or withworth but the angle is 55 ?
Hello....what cnc machine do you recommend for making water blocks and distro plates that is more budget friendly? Thanks
Alex could you please help me , when im cutting the G1/4 threads with my sorotec thread mill it goes up and not down to cut the threads do you know the solution please i hope you can help
Climb cutting will go to the bottom of the hole first and then spiral up, conventional cutting will spiral downwards into the hole. Is that what you meant?
@@bittech1 no i mean when i set the zero z hight and then start cutting the thread it goes up Just the movement it would do for the threads but it goes up instead of down
thank you for this video good luck
Soo... For a 2mm O-Ring diameter, we use a 1.3mm ( 65% ) deep but 2.2mm ( 110% ) wide O-Ring Groove?
Would those percentage numbers hold true for any O-Ring diameter size or is this a 2mm specific one and does it hold true for any O-Ring material ( Nitrile, Silicone, etc... )?
Hello can u give make and model of cnc router u use and other cnc products?
hi what software do you use for your router i.e. ugs/source rabbit etc and if so how do you incorporate tool changes into your machine code through fusion?
Great design, do you sell your works from China?
nice vid!!
Hey, i realy enjoy your vid. Did you try to make a DIY gpu block. This could be realy amazing if this is possible due to a pricepoint.
You see, graphics cards are complicated things. Making a custom block for them would be pretty hard and expensive
how much does a cnc machine like that cost?
Round about 4000€
Is there someone providing this service? I can design it, but who is machining them?
do you accept orders???
Not currently I'm afraid :/
COuld you make a distro plate for the corsair crystal 570x specifically one that goes on the side panel you see al the components on, I'm having some trouble making my own and am not liking the available options because many of them are just unbelievably over priced
Now tell what cnc machine to buy
Shame about the music : (
What I mean by that is, and every 'TH-camr' tends to do it, they replace everyday sounds with ridiculous music! I'm sure many viewers would much rather hear the CNC machine working away.
I for one would of preferred hearing what that spindle sounded like, also, what's the sound of Acrylic when it's being machined?
Putting aside my personal little grievances .................. What a fantastic video! Loads of great information ( thanks for the recommendation of the Datron & Sorotec milling bits ), I take it you're in the UK? I'm in France and it's always difficult to find quality parts here.
Off to see the rest of your videos ; )
TURK
T4 Concepts
Honestly I’m a bit torn between machine sounds and not having them. I watch a lot of machining channels where both are done so have no real preference. I will say though that my router sounds horrific cutting aluminium as the spindle is such a high pitch whine, which causes microphones to clip. It’s not that satisfying sound you get from the bigger machines or manual ones. I tried overlaying some before and it just made it unwatchable.
@@bittech1 Thanks for quick response mate, yeah, know what you mean ........ bit of both then!? sounds of spindle and background music? We can always alter the sound from our end.
Just been watching your CNC machine being delivered, WOW that's a monster!
I've got the 'WorkBee' CNC from Ooznest in the UK. Great cnc machine : )
I was just thinking ( watching your other videos ), that I was building custom made computers back in 1990 .................... 28 years ago!!!!!
I'm getting old! ; )
TURK
T4 Concepts
Can anybody point me at a site or company that does custom cnc milling re: distro plate? I checked back and forth and the only ones I can find are the big coms that do this. They charge like 300+ quid for a 148mm by 105 mm (A6 - yes, that's all I need) sized distro platelet which I designed in fusion360 and that's kinda doing my head in. Anybody knows some place that does it for more reasonable prices in the UK or anywhere else in the EU? US would be ok too, but that usually takes ages in shipping times, but I can live with that. Anybody can help me out here or point me to one? Much appreciated; thanks!
John Verhoef 1 off custom parts are usually expensive. The tooling setup costs are by far the largest expense
@@bytefoundry8702 I suppose you're right and I wouldn't mind like 200 quid (that's Euros and/or Pounds, so you have to add about 25-40% to that when converting to Dollars), but 396 for 10 by 14 cm is just a bridge too far for me. Not that I can't afford it, but it just doesn't make any sense to me to spend that much on a relatively small piece of plastic. Suppose I will get me one of those prefab ones, but none of those are in the size that I want. I'd nearly say that it would be cheaper for me to get me one of those Chinese desktop cnc machinelets and make one myself, as they are not even 200 quid. I'm not sure however whether those are capable to cut out 5mm in a 10mm plate. You perhaps have any idea if they are any good? Thank you for your reply btw!
John Verhoef although you may have better luck with smaller shops or individuals who already manufacture distroplates, like savantPCs or Radikukt
@@bytefoundry8702 Thanks again :) I already tried Radikult, but Mario says he's too busy to take on new (custom) orders, but I will try Savant.
John Verhoef I just built a CNC and am still working out the kinks. If you still need help in a few weeks, just lemme know
your mustache is cnc machined too kkk
My mind thought the "distro plates" in the thumbnail was "dorito plates" ... sounds normal to me.
naught = zero. I looked it up to make sure
What the heck is a Distro-plate?
It's essentially an aesthetic manifold. Coolant for the PC passes through it instead of tubing, allowing for some very interesting possibilities.
Very bad practice to leave your chuck key in the lathe when it is stopped.
Жаль что не в русском языке 😭
Love the channel and topics but, it is so annoying to hear British people say aluminum incorrectly. Aluminum was created in the US we named it so the way we say it is correct. If England created something useful we would say it how you name it.
I think you need a history lesson rofl. Famous English chemist (and chairmain of the Royal Society) Humphrey Davy named the element, and even that only after his original "Alumium" was discredited. Not only that, it was discovered before then by a Danish physicist, and the first means of production by the French. Even further, Aluminium is the current primary spelling as dictated by IUPAC, with aluminum being an acceptable variant.
@@bittech1 and commercialized by Alcoa in the US by Charles Martin Hall. It's one thing to talk about it another to actually do it. All these other people had theory our guy had vision.
Жаль что не в русском языке 😭
Жаль что не в русском языке 😭