Je me suis fais opérée a l âge de 69 ans d'un spondylolisthesie a Marseille aujourd'hui je n ai aucune séquelle aucune douleur je remercie mon neurochirurgien qui a fait du très bon travail.
Please look up other methods as well, after this you will be stiff as... and later the segments above will give away... just a hint, artifical disc replacment and facet joint replacment.
I had an ACDF and I'm never letting anyone touch my spine ever since. Surgery went perfect... Except it didn't. Look up Failed Back Surgery Syndrome. It's 1/4 to 1/2 of patients and now the pain is much more persistent and doesn't respond to NSAIDs.
No way I’d allow any doctor to put hardware into my spine. I’ve seen so many spinal surgery failures among friends and coworkers( I was a firefighter/medic for 48 years). Lots of folks got hurt and talked into spinal surgery and none of them had a good outcome. Many left on medical retirement because they couldn’t function
Of course, the vertebra must be repositioned. Partly so that the nerves will be free, but also so that the balance point will be correct and with that the vectors will be optimized (even more factors are affected) That is, the way the body would actually have been. .
WFT is the spinal canal properly decompressed and aligned? The L4 vertebral body looks way out of line at the end of the procedure and the spine has no lordodic curve. Perfect waste of a 3d printed model. It should have spacers for the disks. The model should have been adequately shaped and supported and the rods properly bent to show that you can get good alignment to correct the listhesis.
@@gscranage4594 i am not a spine surgeon either but that is the whole point of a multi level spinal fusion, rods are put in place to keep vertebral bodies immobile while the bones fuse together. Sometimes rods are subsequently removed, sometimes they stay. It depends on the circumstances. Loss of lumber spine mobility is unfortunately one of the drawbacks of these types of surgeries.
That video scares the shit out of me. The metal set up is way bigger than it needs to be. It looks like it is 1960 equipment and needs to be redesigned .
Please really do your research before electing for back surgery. My father-in-law was basically talked into getting back surgery by a surgeon and his life has totally deteriorated. One surgery turned into five. He says he is in 100x more pain now after the surgeries. I get that there are obvious situations where back surgery is necessary and can help, but just please do your research. It's not something to just jump into right away.
Yeah I fell on my back at work. Got screwed over by workers comp, doctors, and company. I have had SLAP TEAR II surgery on one shoulder, need the other, cervical spine, Lumbar, and T are ruined. I just got updated MRI's and doctors say surgery or nerve ablation... My problems are way past nerve ablation. I don't known what to do. I need surgery but seems so negative. 😕 My spirit is broken and so is my body. Anyone know some procedures that are successful?
Also I wanted to say I am sorry for all the pain you all have had to endure, what's going on in this situation for people like us is brutal pain wise, and very unfair. Prayers 🙏 🤲 Wish you the best.
IN 1914 L HAD THIS FUSION OPERATION BUT L AM LIMITED THINK L WAS DOING BEFORE IMPOSSIBLE TO DO TODAY THINK WELL BEFORE DOING THAT OPERATION , L AM TODAY LOST 80 % OF MY ACTIVITY.
NO observe que se obtuviera reduccion de la listesis L4/L5, mucho andamiaje pocos resultados. no se obtuvo reduccion ni recuperacion del espacio intervertebral, ademas fue realizada en un modelo plastico.NO es una buen metodo.
Если один человек ,это придумал как лечить ,ремонтировать кости ,то другие это уже не придумают некогда.Толька могут украсть идею.Асобено если у этого человека самого эндопратезы стоят в тело.
Je me suis fais opérée a l âge de 69 ans d'un spondylolisthesie a Marseille aujourd'hui je n ai aucune séquelle aucune douleur je remercie mon neurochirurgien qui a fait du très bon travail.
Does the patient get to choose the colors used?
Is that entry point at 02:09 is too medial, isn't it?
Wow! that looks so rigid on the spine. I would hate to be the vertebrae below or above that contraption.
No spine discs between vertebrate
rods should have been angled for lordosis.
I ve done l4l5 plif. The doctor worked like a car mechanic. left bone in there and screw is brigded. pls choose the right doctors.
Please look up other methods as well, after this you will be stiff as... and later the segments above will give away... just a hint, artifical disc replacment and facet joint replacment.
Thank You
I had an ACDF and I'm never letting anyone touch my spine ever since. Surgery went perfect... Except it didn't. Look up Failed Back Surgery Syndrome. It's 1/4 to 1/2 of patients and now the pain is much more persistent and doesn't respond to NSAIDs.
No way I’d allow any doctor to put hardware into my spine. I’ve seen so many spinal surgery failures among friends and coworkers( I was a firefighter/medic for 48 years). Lots of folks got hurt and talked into spinal surgery and none of them had a good outcome. Many left on medical retirement because they couldn’t function
The L5 bone was still pushed fwd he didnt slide it back in place.
Of course, the vertebra must be repositioned. Partly so that the nerves will be free, but also so that the balance point will be correct and with that the vectors will be optimized (even more factors are affected)
That is, the way the body would actually have been. .
No vi corrección de la espondilolistesis
No sound,😢
After this, You are officially Screwed up!
~👍~
Bilateral facectectomy,Discectomy interbody cage
I'm just waiting to get this very operation
thanks for video
I just undergo this spondylolistheses fusion, InshaAllah it's be OK.
আমার তো বহুদিন আগে ভেঙে গেছে হবে হবে 2008 সাপ আর এখন 20 20 আর কি হবে
InshAllah. How did it go?
Alhamdulillah, it's good, it's been 1year now still OK,
@@dhingzpaner3251 that’s great Allhamdolilah. I’m going for the surgery end of the year and InshAllah it will go great.
@@dhingzpaner3251 I which hospital?
What is he demonstrating?How come there is no audio.
This is an implant system for a lumbar spine. This would be a PLF.
I’m considering it ... how painful and what’s the recovery time for 64 yrs old women?
Its Always depend on your deceplin and habit.
1 year
Tq sir 🙏🏻
Мне вот так же вставляли винты( болты).
Great video thx
Hi how much gonna coast this sut plz with the price of the screw and rods
98,000 US $
👏👏👏👏👍Dios q sencillo se ve
Im scare to opt
WFT is the spinal canal properly decompressed and aligned? The L4 vertebral body looks way out of line at the end of the procedure and the spine has no lordodic curve. Perfect waste of a 3d printed model. It should have spacers for the disks. The model should have been adequately shaped and supported and the rods properly bent to show that you can get good alignment to correct the listhesis.
I’m not a surgeon but if this was a real operation the patient would be in more pain & wouldn’t be able to bend their back around the lumbar position!
@@gscranage4594 i am not a spine surgeon either but that is the whole point of a multi level spinal fusion, rods are put in place to keep vertebral bodies immobile while the bones fuse together. Sometimes rods are subsequently removed, sometimes they stay. It depends on the circumstances. Loss of lumber spine mobility is unfortunately one of the drawbacks of these types of surgeries.
Two mistake; he didnt use cage and not angle the rods .
That video scares the shit out of me.
The metal set up is way bigger than it needs to be.
It looks like it is 1960 equipment and needs to be redesigned .
😂😂😂😂
O man i hope this guy dont operate on me
mal aplicada la técnica, encuentro varios errores
Hi the video is mute
Please really do your research before electing for back surgery. My father-in-law was basically talked into getting back surgery by a surgeon and his life has totally deteriorated. One surgery turned into five. He says he is in 100x more pain now after the surgeries. I get that there are obvious situations where back surgery is necessary and can help, but just please do your research. It's not something to just jump into right away.
I've had 4 surgeries and none have been successful.
Yeah I fell on my back at work. Got screwed over by workers comp, doctors, and company. I have had SLAP TEAR II surgery on one shoulder, need the other, cervical spine, Lumbar, and T are ruined. I just got updated MRI's and doctors say surgery or nerve ablation... My problems are way past nerve ablation. I don't known what to do. I need surgery but seems so negative. 😕 My spirit is broken and so is my body. Anyone know some procedures that are successful?
Also I wanted to say I am sorry for all the pain you all have had to endure, what's going on in this situation for people like us is brutal pain wise, and very unfair. Prayers 🙏 🤲 Wish you the best.
Fusions can be a nightmare for the vertebra below and above the fusion. People can get a thing called Segment Adjustment Syndrome.
age
I should have a set instrument in iran pls
Help us your contact details
IN 1914 L HAD THIS FUSION OPERATION BUT L AM LIMITED THINK L WAS DOING BEFORE IMPOSSIBLE TO DO TODAY THINK WELL BEFORE DOING THAT OPERATION , L AM TODAY LOST 80 % OF MY ACTIVITY.
More pain
NO observe que se obtuviera reduccion de la listesis L4/L5, mucho andamiaje pocos resultados. no se obtuvo reduccion ni recuperacion del espacio intervertebral, ademas fue realizada en un modelo plastico.NO es una buen metodo.
No Thanks ! 😳
Actually this type of operation is done by the neurosurgeon I suffered from spondylosisthesis third grade I operated recently
Copy of legacy Medtronic spinal system
CopyCat of Medtronic product (Legacy).
V v bad AAP kabhi bhi ye opreshin nahi karwaye
Par kyu?
Если один человек ,это придумал как лечить ,ремонтировать кости ,то другие это уже не придумают некогда.Толька могут украсть идею.Асобено если у этого человека самого эндопратезы стоят в тело.
Looks completely srewed up 🤦🫣😖