OMPHOBBY M2EVO servo & main blade 0 pitch setting, collective pitch setting

แชร์
ฝัง
  • เผยแพร่เมื่อ 6 ก.ย. 2024
  • This video shows how the M2 V2 and M2 EVO are always set up by the controller before shipping to customers who purchased the aircraft from Neoheli. Almost 100% of the aircraft shipped from the factory do not have the correct servo linkage length and the swash is not level, so the main blades do not have 0 pitch. If these are not set properly, the maximum +100 and minimum 100 pitch angles of the collective pitch cannot be set to the same +/ pitch angles for the upper and lower blades when the main blade pitch angle is set to 0 degrees with the IDLE UP2. If the above settings are properly made when performing 6-axis gyro calibration, the hovering stability of the aircraft will be greatly enhanced. If the rescue function is accidentally used during 3D flight, for example, switching to 6-axis mode will make it easier to return to a normal attitude without a large aircraft drift. This will greatly help prevent the aircraft from crashing.

ความคิดเห็น • 9

  • @MARKLINMAN1
    @MARKLINMAN1 9 หลายเดือนก่อน

    When checking your pitch, run your pitch stick UP and Down on your radio, swinging the blades around is DOING nothing with checking your pitch, just an FYI. I leave the pitch gauge on and push the stick up and down then check for ZERO pitch in the middle. Love these little Helis for small place flying, BEST small Helis EVER, especially for the price. 👍🏼👍🏼

    • @neohelirc
      @neohelirc 2 หลายเดือนก่อน

      Do you own an Omphoby M2 helicopter? Or have you never done this gyro setup? I have done everything you were told. It seems like you don't understand how to set up the M2 gyro.

  • @nicklong9985
    @nicklong9985 10 หลายเดือนก่อน +2

    Silent but deadly 👍

  • @Michael.C.Duisburg
    @Michael.C.Duisburg 2 หลายเดือนก่อน

    videos without words help no one

    • @neohelirc
      @neohelirc 2 หลายเดือนก่อน

      I have set it so that text can be displayed on the screen. Since I am Japanese, it is displayed in Japanese.

  • @claudevandaele4402
    @claudevandaele4402 2 ปีที่แล้ว +3

    Nice job !

    • @neohelirc
      @neohelirc 2 ปีที่แล้ว +1

      ありがとうございます。thank you❗️

  • @pagodadr
    @pagodadr ปีที่แล้ว +1

    Love the design but way too small!, scale it up, so I can see it when in the air! Use to fly Flybar Nitro in the 80's. these are great Helis, but way too small to fly unless your in a restricted site!

    • @bubblef8073
      @bubblef8073 ปีที่แล้ว +3

      Bought it 3 weeks ago flys better than a trex450, do not fly that to far away its hard to see, but hey best small Heli I ever had.
      I rock that thing on lunch break and anywhere else I have time to fly!