Focus ST - How to Clean Throttle Body! *The Easy Way!
ฝัง
- เผยแพร่เมื่อ 27 มิ.ย. 2024
- Focus ST - How to Series:
This is a quick and easy way on how to Clean your throttle body!
*Note i used Mass Air Flow sensor cleane instead of Throttle Body Cleaner, per CRC for the Maf sensior Cleaner "It is non-conductive with no chlorinated solvents, giving you peace of mind in your working environment". **So it is safe for spraying directly into the throttle body.
#focusst #howtocleano2sensors
#focusrs #builtenginefocusst #bigturbofocusst
#focusst.org #focusrs.org
#focusrs #fordfocusrs #focusrsmk3 #focusrsmk2 #focusrsowners #fordfocusrsmk3 #mk3focusrs #focusrsoc #fordfocusrsmk2 #focusrsmk1 #ffocusrsnation #mk2focusrs #focusrsarmy #focusrsforum #2016focusrs #mk1focusrs #focusrslove #focusrs500 #focusrsownersclub #focusrsrx #focusrsclub #focusrsmk #fordfocusrsrx #focusrsnation #mk3focusrsclub #fordfocusrsmk1 #focusrst #fordfocusrsowners #focusrs_owners #fordfocusrswrc #fordfocusrs500 #focusrswhite #focusrsgram #focusrsmk3ownersclub #focusrs2016 #focusrsstswitzerland #focusrsmk3clubitalia #focusrsedition #2017focusrs #focusrsorg
#focusst #focusrs.org
#bigturbofocusst #focus.org
#bigturbofocusrs #builtenginefocusst
#2.3strokerfocusst
#7163efrfocusst #stage3camsfocusst
Very nice. I'd personally replace the gasket while I'm at it.
You definitely can, they tend to last a while tho since ive reused mine over.
*Note that i used Mass Air Flow Sensor Cleaner since its not as harsh as Throttle Body Cleaner and cleans really well especially with a brush or wrag.
Worst idea to spray cleaner directly into a electronic throttle body
The solvent is made for cleaning all throttle bodies, it drys instantly unless you got a wrag or a cue tip which helps clean it better, its literally the best way otherwise i wouldnt do it. How are you suppose to clean it otherwise? The worst idea would be to spray it with degreaser and water.
@@WhiteblurrST the solvents are conductive and spraying directly into the throttle body has a chance of solvent leaking into the electronic components through the shaft of the butterfly. The correct way is like start of video with rag, or spray onto rag and brush old toothbrush over the solvent on rag and clean the throttle body, wipe down after with rag.
*Also note i used Mass Air Flow sensor cleaner not throttle body cleaner, maf cleaner is safer and less harsh than traditional tb cleaner too but cleans just as well especially with elbow grease.
per CRC for the Maf sensior Cleaner "It is non-conductive with no chlorinated solvents, giving you peace of mind in your working environment". Google it if you want bud.
@@WhiteblurrST that is good yes, maf sensor cleaners are safe on electronics
It’s not foot pounds 😂😂 you’ll snap them bolts..
it’s inch pounds.
14.7 foot pounds is 177 inch pounds😅
I always talk ft lbs, and it's converted from inch lbs.
Exactly 💯