I understand why you are trying to get the shapes to line up, but I don’t think it’s necessary because the book page will be between them. Thanks for this idea!
@@KaylasCricutCreations Rotate the top image 180 degrees, solves the backward word problem, don't do the flip, or align horizontally or vertically. Do a 180 rotate only. I do it all the time.
Thank you so much, I literally just bought magnets for bookmarks. I saw the video but didn't know you just uploaded it till I saw the new cricut update then went to check when it was posted 😂 Best coincidence ever, and you covered everything I needed to know 🤗😁
Kayla, I just want to say thank you for your patience and your ability to kinda give the same information in similar videos (eg, using the contour/offset/operation options). I don't even own a Cricut or anything, but I've found these videos to be so therapeutic to watch lol, and the amount of grace you have to bring forth the skills you're teaching is simply amazing. I applaud and appreciate you and your time! Thank you! Have a blessed weekend ❤
I love those magnets! I want to try making some but I think it might take me all day…lol. Your instructions are so appreciated since contour/ offset I m new to. Thank you! They are so cute..great idea!💜
Your videos have been a God-sent. Thank you so much for being clear, concise, and to the point. Also, not sure if it helps but I’ve found that selecting a Holographic material in DS before I cut makes a huge difference. I use “holographic card stock” or something similar and my machine cuts the holographic laminate fine. Thanks again!
This is great - thanks for the great tutorial! These will be awesome for my "Christmas in July" craft fair! And something else I'd love to see you do a tutorial on would be faux leather patches. The faux leather can be backed with adhesive and then cut on the Cricut, and then HTV can be used to apply a design. These patches would be good for ball caps, backpacks, jacket sleeves, etc. I'd love to watch you do something like this! Thanks for all the great instruction - love watching you!
Can you do a follow up video on the glass cans you've done so far? I'll like to know how they are holding up. I want to make some but I'm so sceptical about the vinyl on Libby cups and wondering how long they'll last. Also if you have any updated tips and trips
Hi love your sticker video... just upgrade to Cricut access .. can you do video on the sticker magnet,did look for cardstock adhesive back and it doesn't have it the material setting.. what other material setting could I use.. well I just tried it and my bar didn't go the back, and I don't think it let me flatten it.. will try again..😢
Thanks for this! I THINK (if I remember correctly) you can click offset, give the measurement, and choose the color of the offset to make stickers with a white border.
For the odd shaped one, instead of aligning it etc, just rotate the top one 180 degrees, that way the reading will be correct on the other side. Hope this helps.
Hi! I found a solution to the double sided script situation. If you duplicate and rotate the image 180(ish) degrees it’ll completely flip upside down and be legible :)
I love these but is there a code or something to use for this? When I go order the paper it says $9.90 but in the cart it says $14.80 and the shipping is ridiculous at $15.00. So at check out this cost $31.10
Sorry for the super late response! I usually like to make a bigger order to get free shipping. Some of Teckwrap Craft's products are on Amazon and I did look and found the Holographic sheets on there. Here's a link to them: amzn.to/3xNzVOs
I understand why you are trying to get the shapes to line up, but I don’t think it’s necessary because the book page will be between them.
Thanks for this idea!
True!!!
i was thinking this too. i also think the backwards writing is kind of cute anyways if you really did want the shapes to line up.
@@KaylasCricutCreations Rotate the top image 180 degrees, solves the backward word problem, don't do the flip, or align horizontally or vertically. Do a 180 rotate only. I do it all the time.
I would love more videos using the Cricut Joy. Gift ideas for children, best friends, and family. Special Occasions, too.
I'm hoping to get some Cricut Joy videos posted soon! :) Thanks for the ideas!
Thank you so much, I literally just bought magnets for bookmarks. I saw the video but didn't know you just uploaded it till I saw the new cricut update then went to check when it was posted 😂 Best coincidence ever, and you covered everything I needed to know 🤗😁
Great timing!!! I'm so glad! Have fun 🤩
Kayla, I just want to say thank you for your patience and your ability to kinda give the same information in similar videos (eg, using the contour/offset/operation options). I don't even own a Cricut or anything, but I've found these videos to be so therapeutic to watch lol, and the amount of grace you have to bring forth the skills you're teaching is simply amazing. I applaud and appreciate you and your time! Thank you! Have a blessed weekend ❤
I made these with just images…no words. They came out great! Thanks for sharing
I love those magnets! I want to try making some but I think it might take me all day…lol. Your instructions are so appreciated since contour/ offset I m new to. Thank you! They are so cute..great idea!💜
Girll!! Thanksss…!! People like you, world is still beautiful..! ✨✨
They looks great! Thanks for sharing the process
Thank you for your tutorial. After much wasted ink and cardstock paper, I finally figured it out 😊
Such a cute idea! Love the magnet bookmarks! Thanks for sharing! ❤
Always love your ideas. I have a couple of new babies coming and would love to something I could make as gifts. Thank you for everything ❤
Great idea!! I can definitely look into DIY baby gift idea videos! Congrats 🥳
Your videos have been a God-sent. Thank you so much for being clear, concise, and to the point. Also, not sure if it helps but I’ve found that selecting a Holographic material in DS before I cut makes a huge difference. I use “holographic card stock” or something similar and my machine cuts the holographic laminate fine. Thanks again!
This is such a wonderful help! Thank you so much for putting this together.
Thanks so much for taking the time to redo this.
Those are super cute! Thank you for sharing your mistakes, it helps me out a lot ! Love your work :)
Thank you so much!!💗 I feel like the mistakes are good to keep in there since I'm sure I'm not the only one dealing with them. 😂
These are great. Thanks for taking the time to figure it out.
This is great - thanks for the great tutorial! These will be awesome for my "Christmas in July" craft fair! And something else I'd love to see you do a tutorial on would be faux leather patches. The faux leather can be backed with adhesive and then cut on the Cricut, and then HTV can be used to apply a design. These patches would be good for ball caps, backpacks, jacket sleeves, etc. I'd love to watch you do something like this! Thanks for all the great instruction - love watching you!
These bookmarks look so good ☺☺
Thank you so much I love these!!!. My daughter loves to read so I will make her a few❤
She will love them!!!
Girl this was a great video. Thanks for showing us the oops moments too!
Can you do a follow up video on the glass cans you've done so far? I'll like to know how they are holding up. I want to make some but I'm so sceptical about the vinyl on Libby cups and wondering how long they'll last. Also if you have any updated tips and trips
Great job on instruction!!
This video had a lot of really helpful tips. Thanks so much!
Than you, Kayla🎉❤
You are super awesome at explaining/teaching❤🎉
Any tips on how to adjust your settings when the dial won't read custom anymore?
Thanks Kayla! I've been wanting to try to make some of these!
Thanks for another great idea! What is the brand of felt scrapper are you using or does it matter?
Hi love your sticker video... just upgrade to Cricut access .. can you do video on the sticker magnet,did look for cardstock adhesive back and it doesn't have it the material setting.. what other material setting could I use.. well I just tried it and my bar didn't go the back, and I don't think it let me flatten it.. will try again..😢
So cute!! I wonder if you can do this using magnet sheets? I’m not sure if a Cricut would cut through them
I actually think you can! I'll look into it and possibly post a video on it!
Those are so cute!
Thanks for this! I THINK (if I remember correctly) you can click offset, give the measurement, and choose the color of the offset to make stickers with a white border.
For the odd shaped one, instead of aligning it etc, just rotate the top one 180 degrees, that way the reading will be correct on the other side. Hope this helps.
Great tutorial TFS💕
I would love to see a video on sublimating plates
I'll add it to the list! I have never done that, but will definitely look into it!
Hello,what kind of paper id you use?? Gsm ?
So so beautiful ❤
Awww! Thank you!!
And now i wanna try cuz im exited jajaja
Great vid
Hi! I found a solution to the double sided script situation. If you duplicate and rotate the image 180(ish) degrees it’ll completely flip upside down and be legible :)
U can just do the design in the front and blank in rhe back and its still beautiful
You can always just put reg tape over the black lines and it'll read just fine
I love these but is there a code or something to use for this? When I go order the paper it says $9.90 but in the cart it says $14.80 and the shipping is ridiculous at $15.00. So at check out this cost $31.10
Sorry for the super late response! I usually like to make a bigger order to get free shipping. Some of Teckwrap Craft's products are on Amazon and I did look and found the Holographic sheets on there. Here's a link to them: amzn.to/3xNzVOs
Can’t you just turn it manually and that way it will ready the same on both sides?
❤
Just rotate
You are super awesome at explaining/teaching❤🎉