It was a local buy off Craigslist. They occasionally turn up for sale on Craigslist and OfferUp in bigger cities, and can be purchased used online from a number of sellers.
@@aliciahall6799 If you need any additional info, just shoot me a message. I spent entirely too much time researching machines and rebuilding a couple.
Hi, brilliant video, quite informative. I am Simon, from Cape Town. I just bought this exact bartacker that has not been used for some years. I wanted to ask if I can get a pdf manual for this model, to show me some stitch length/width adjustments.
@@kelvinortiz4682 E-9 is abnormal voltage. The power to the machine needs to be adjusted, or the machine needs to be configured for a different voltage.
E-8: Abnormality in motor PROM or malfunction of main P.C. board. Possible causes and solutions. 1. PROM chip defective. a. Check the PROM chip is securely attached to the main circuit board without its lead bent. b. Check the PROM chip is attached to the main circuit board with the letters MN and MT on the PROM chip and those on the main circuit board matching. 2. Main circuit board defective.
I'm not seeing an E-0 error listed in the manual. I think this is just a jam warning, meaning the machine needs to be turned off, the jam cleared, then the machine can be turned on. Check machine timing, needle, threading, etc.
![[ไฮไลต์] แบดมินตันชาย SHI Yu Qi (จีน) vs วิว กุลวุฒิ (ไทย) รอบ 8 คน | โอลิมปิก 2024](http://i.ytimg.com/vi/f7z7taforOM/mqdefault.jpg)
Nice. Now get to making THE-E Pocket Organizers so I can buy several. Come on... been unavailable for long enough now. :)
WOW this is amazing! I've been looking for a bartacker like this for ages. Where did you purchase your machine?
It was a local buy off Craigslist. They occasionally turn up for sale on Craigslist and OfferUp in bigger cities, and can be purchased used online from a number of sellers.
@@OVInnovations Thank you so much! I will definitely check those out.
@@aliciahall6799 If you need any additional info, just shoot me a message. I spent entirely too much time researching machines and rebuilding a couple.
@@OVInnovations thank you I just might!
Hi, brilliant video, quite informative. I am Simon, from Cape Town. I just bought this exact bartacker that has not been used for some years. I wanted to ask if I can get a pdf manual for this model, to show me some stitch length/width adjustments.
Shoot me an email and I'll send them over: ovinnovations.com/pages/contact
Eror 50 problem
Una pregunta cómo la programas te es que tengo una de estas y no puedo progarmarla por favor
We can program for you.
ovinnovations.com/products/custom-programming
Una pregunta es que me aparece E-9 y no alsa el pié
@@kelvinortiz4682 E-9 is abnormal voltage. The power to the machine needs to be adjusted, or the machine needs to be configured for a different voltage.
Una pregunta y como es esa configuración
@@kelvinortiz4682 Check the service manual, section 10-8.
www.manualslib.com/manual/441046/Brother-Lk3-B430e.html?page=71#manual
Kalau eror 8 apa kendalanya?
E-8: Abnormality in motor PROM or malfunction of main P.C. board.
Possible causes and solutions.
1. PROM chip defective.
a. Check the PROM chip is securely attached to the main circuit board without its lead bent.
b. Check the PROM chip is attached to the main circuit board with the letters MN and MT on the PROM chip and those on the main circuit board matching.
2. Main circuit board defective.
Error E-60 & E-63 please..
E-60: Presser has not been lowered
E-63: Presser cannot be lowered
Turn off the power and check connection of presser sensor connector P1
Buen día un favor tengo un presilladora que se me trabo sale en pantalla E - 0 E so pita un sonido
I'm not seeing an E-0 error listed in the manual. I think this is just a jam warning, meaning the machine needs to be turned off, the jam cleared, then the machine can be turned on. Check machine timing, needle, threading, etc.
ENCONTRASTE COMO SULUCIONAR YO TENGO EL MISMO PROBLEMA
@@alexsaldana952 Can you take a photo of the error that shows up on the display screen?