Spigen NeoFlex Screen Protector for Samsung Galaxy (Case-Friendly)
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- Flexible, case-compatible but most importantly, made for the infinity screen.
Unlike glass, Neo Flex is made of a flexible layer made to stay adaptable to any screen surface. So the latest infinity screen with its curved edges? Not a problem. Simply apply it on wet with a case and voila.
Have Neo Flex take the hit, not your phone.
S8: spigen.co/neoflex8
S8 Plus: spigen.co/neofl...
Connect with us:
/ spigenworld
/ spigenworld
/ spigenworld
I just applied this yesterday and while it's not as good as GLAStR Curved Tempered Glass....it's better than nothing. It was also easy to apply following the techniques below.
My suggestions for improving the technique seen in this video.
1. To avoid fingerprints, wear laboratory type disposable gloves.
2. Take the phone out of the case so that you can properly scrape the cover slip over the edges of the phone.
3. Don't overcoat the cover slip with the spray as seen in this video. First test out the spay stream to see how far away the fine mist is generated. (it's a crude spray nozzle that does not emit an even fine mist). Then hold the cover slip at a distance to only capture the fine mist.
4. After placing the cover on the phone and aligning it...again only spay a fine mist over the top cover.
5. You don't need to draw an imaginary line with the scraper. Simply start in the middle with the scrapper and scrape outwards towards the edges. Work from the middle out towards the edges. DON'T USE TOO MUCH PRESSURE during scrapping.
6. Once the NeoFlex film is snuggly secured, wipe over it starting in the middle and out towards the edges with a dry blue paper towel or felt dry cloth. Lay the phone down and allow it to dry for at least 30 minutes.
7. Give it about 3 hours for the clarity to become 100%.
I'm not sure why Spigen didn't make a GLAStR Curved Tempered Glass for the S 20+, however the NeoFlex is better than no protection and the clarity and screen touch sensitivity are as good as if I had no cover on it.
Hello.. Im about to purchase this product for Huawei P30 Pro. You said the clarity of this protector is good, is there any degradation on color quality or color reproducing?
Im afraid of the screen protector will make the quality of the screen reduced in terms of clarity, sharpness and color
@@radite2177 Hi Radite,
I've not experienced any color degradation on color quality or color reproducing.
The good thing about this screen protector is if bubbles start to appear weeks later due to not properly applying it...you can lift the edge until you reach the bubbles and smooth it back down without having to respray it.
@@tvc1531 thank you for your answer !! :)
Purchased today and love it already, the video and your tips really helps me on applying procedure. Color and clarity still awesome too !! Thank you very much and have a nice day !! :D
@spigen .... Please PIN 📍 this comment 😊
Would help if there was captions explaining what was actually happening
Just applied this screen protector on my S9... and no problems here... you do have to apply it on with a the case over the phone in order for it to work properly (i used a spigen tough armor case)... follow this video to the tee like i did... the only thing different i did was wait 2hrs... then use the phone till it heats up... like 1440 at 60fps videos...🔥🔥🔥🔥🔥 and the finished product was astounding... even took out the micro scratches all over the screen... dont know why people are having problems with the application... cuz this was my first time applying this type of screen protector... 🤷♂️🤷♂️🤷♂️🤷♂️🤷♂️
IMPORTANT NOTE: Remember to apply the squeegee gently. It's completely normal for some white spots to remain after applying the screen, and it needs some sort of 1-2 day curing process. After 1 week, the screen no longer feels soft and rubbery.
WHy is it so hard for these companies to make a curved glass screen protector in 2017???
LethalPhatGuy The answer is in your question. It is so hard lol
Sadly, there are many complexities to the matter. The rigid nature of the glass is not only incompatible with curved edges but every phone screen is slightly different in every device so not universally compatible. However, despite the choas, we're currently testing to create the right one so we hope to see you in our social media channels for updates!
Humans have gone to mars invented AI Robots but can't make a glass protector for curved phones A FUCking glass protector!
Humans have only sent probes to Mars, several which have failed to make it there successfully and although we have AI (Apply to robots where needed), there really not all that intelligent. So, I suspect when we successfully put people are Mars because we have to escape the AI Robot uprising, curved glass screen protectors will probably be a thing. ;-)
I had a curved one for the s6 edge and it fitted perfectly, also had one for the gear go which had a curved screen
If you have bubbles wrinkles or any other defects you probably installed it wrong. I received mine yesterday and it is hands down the best screen protector I've used so far. It has only been a couple of days so I'll keep y'all informed if anything goes wrong but it's looking solid. Fun installation too 😁. Oh and by the way I have the spign neo hybrid case
What about the condition now? I have the new Samsung s9 and I don't know if put a screen protector or keep it without...
Update?
@@crispydosaa the phone exploded
Even after reading other peoples negative comments I still thought I would give these screen protectors a try, especially as Sigens cases are great.
I could not be more disapointed. After 3 days I have removed the protector due to the lack of clarity the protector has, the orange peel effect and all the micro scratches it has picked up in a short space of time.
I will be going back to Samsungs original screen protectors and I recommend not buying these ones.
Where can i buy original screen protectors?
@@fetterchinese24 Amazon or Samsungs website
First time buying from Spigen and it applied so well with almost no knowledge on how to put it on. Definately buying from the again when I need to.
Don't take any notice of the negative comments. Easy to install and fantastic results. You've done it wrong if you've not got good results. Highly recommended.
Alan Docherty using liquid is an easy install pfffft ok
Lies it gets dirt
Andrew Li Liquid is bullshit. I saw so many videos of it and it do nothing.
MrBaracu I have a zagg. It was $50 for the privacy protection glass. I’ve bought it 4 different times because it’s so good. Wouldn’t use anything other than the zagg. So easy to put on too
yeah really nice summary, if the result is bad, the fault is yours.
Moto X4 with Springer Case
First time I try to apply/install a screen protector. I tried to follow the instructions, but this thing is simply difficult to install.
This was an absolute disaster; it was quite difficult from the beginning. I think some written instructions would help a lot.
For some reason when I tried to clean the screen with the supplied cloth, there was some kind of dust all over the screen, which seemed some kind of residual stuff from the clothe (the phone is brand new, I removed the new plastic cover for the first time). I applied lens cleaner and it was much better.
Then I think I saw some kind of particle on the sticky side of the protector so I tried to remove it with one of the dust removers (stickers) they provide; I made a mess, the protector immediately got a dirty appearance and I left some fingerprints all over the glue on the protector.
I continued to install the protector, it didn’t look that bad, pretty much no bubbles, but the places where I left my fingerprints were quite evident (some dirty appearance).
There was a spot where I felt some kind particle under the protector, I couldn’t remove even with Silicone squeeze. Then I decided to remove the protector and give it a second try. This time the results where hideous, lots of bubbles, dirty appearance everywhere, bumps. I think I even left some mark (scratch) with the Silicone squeeze (the fabric on one side of the squeeze got worn out).
I will wait for the results until tomorrow, but I highly doubt it will look good.
Life makes so much more sense now! Put the phone in the case and then apply the protector....
Ill put the most phone-covering case i own for best guidance
Sarcasm!? It makes no sense to me at all - it makes the application even worse because now u wont see the edges of your screen anymore AND all the excess liquid will run between the phone and the case. I think the did trat so people buy their covers too!.. Not cool spigen
@@hella6892 The phone is water resistant.. just wipe it dry afterwards.
I just installed this one on my S9 and it was very easy to do so.
And Spigen is allowed to make screen protectors that fit their cases.
It's pretty hard to make a universal screen protector because of the curved edges and not all cases wrap around the edges the same way.
@@withmygoodeyeclosed i know..^^ think about it twice maybe you get it. Im not interested on those spigen screen protectors anyway..;) i have installed a much better protector for months and no need for a spigen ... !
@@withmygoodeyeclosed but if you need a camera lens protector go with spigen. These are superior to all the other lens protectors;)
Tried this. Not bad at all, fits perfect and easy to install. Still, have some dust on the edges because of micro-fiber I used to smooth the edges. Edges better be smoothed with the squeegee or even fingers, then no dust, good there are two pieces of protector
For all those who has air on the edges, just warm it up a little with hair dryer and smooth.. Very easy to install ;)
Seriously saved my entire application, thanks.
@@ToonKuijpers1 j
Seems so complicated, but I love all Spigen's products.
Applied the second one of these from the 2-pack I got when I got my phone. Following the video made the installation a breeze, and my phone looks brand new again!
this is a great screen protector but it's really hard to install it. They did say you can redo it if you mess it up but by the time i took it off it had dust and fingerprints on the sticky side so messed it up. Get someone with accurate and steady hands to do this for you. Great for scratch protection. Once again Spigen saves the day.
I creased mine ☠️☠️
@@Go-nb9jz me neither :(
After reading all the negative comments I almost returned the neo flex, but since there are 2 in the package I decided to try it anyways. As for the application of it, It was EASY! I did everything they did in this video except I did not put it in a case first. I just got my new S9+ so I left protector on back and didn't take original plastic protector off front until I was ready to apply the neo flex protector. So far its been 12 hours, all small bubbles have disappeared. The edges of the protector sealed quickly and as it appears now, does not look like they will lift. I will come back after a few days to update on how its working after using phone with case.
Melissa Renee I don’t believe you. I think you work for spigen and just said a fake review
It's been 4 months now, and you haven't been back yet(?).
Yeah 4 months...
6 months... are you dead?
I think shes dead boys
Just installed on s9, worked great, initially worried about edge but wiping repeatedly (a few more times than the video) say 15x per side and it has stuck down well. Be careful with the micro-fibre squeegy as the corner on mine left some channels behind where I worked out some bubbles. They aren't very noticeable and I hope they fade with time... and I always have the other from the package! Initially felt way too sticky but as it has cured (10 minutes) it already feels smoother and similar to a glass screen.
So I just applied mine while having a shower... so much easier and legit no dust, hope this helps someone!
Has it stayed on? It just looks like as if it would come off so easily.
Wish I read this before going through 4 failed attempts.
I'm going to hear the music from this video in my nightmares. FML
Very disappointed. Love the cases, but jesus, this was difficult. After the first protector stretched out after pushing the air bubbles out, i applied the second one only the the same thing to happen. Now I have a distracting rainbow streak through the middle of my screen due to the stretch. The actual action of moving air bubbles that popped up after application stretched the protector!
What exactly is that chemical
Not worth it, tried to apply 2 of these and came out with a very tacky looking result. I like your other products but these aren't worth it.
Agreed
One question... Can i use normal water? My spray was empty after three uses. I don't know why but this was not enough spray for one protector so how can it be enough for two?
Hello? No support?
Me too
I put it yesterday on my new S9+ and it was perfect!
The installation process seems a little complicated to me.
Complicated means that you can actually do it. These is impossible.
I ordered some just now, but wet installs doesn't seem like a good idea really.
What is the solution made out of?
Cum
@@Dyscrasia I support this message
@@WXYKE LMAO my comment from a year ago still going
@@Dyscrasia yup. First time I broke my phone (through the fucking screen protector by the way) read this, and it's definitely cum.
I bought this protector and it was the easiest installation ever. You can just adjust it while it's already on the screen and the dust just goes off with the water when you squeeze it with that tool.
still has bubbles on the corners it's shit
We'd love to help to please forward your details, such as your order number and the steps you took at support@spigen.com
Jason Fan me too! Its not worth at all.
You did it wrong 😂😂
They'll go away in one or two days
@@chinomar1 exactly!
What kind of liquid is used here?
Just by rubbing the edges, it has created micro fractures that looks like small dots. Also the screen had a micro dot damage prior to the installation and I can see a little dot that didn't go away when trying to re apply the screen.
Do you put the wet side down, surely this can't that difficult to show?
Hoy se la he puesto a mi movil y el acabado es perfecto, otra ventaja es que mientras está húmeda puedes cuadrarla lo más derecha posible en la pantalla.. me ha gustado 👍like
Y0
Mine has really bad rainbow effect.
With these rolled edge phones you need a screen saver built into the case otherwise it lifts at the edges dirt builds up underneath and keeps lifting .
peel off and redo part was catered for me right lmaooo
But there's still bubbles under the screen. And it gives it the look of having plastic over the screen. Not comparable to glass screen protectors.
Is the screen protector going to peels off if i put my phone underwater?
Why do u want to put your phone underwater?
@@Numberonesorabjifan because samsung flagships are IP68... duh 🤣🤣🤣✌🏼🇨🇦
The initial bubbles went away after half a day or so, but the screen is not as crisp as without a screen protector, or with a glass protector.
Will it be better, or is it the best result from a plastic protector?
Thank you for making these tutorial videos, they make it much easier for me to know how to use the product as a new customer.
There's so much rainbow effect!
Did your rainbow effect clear up??
Yep. They suck. They make cases though. They need to stick to JUST cases
Rookies... just applied this to an S9... and no problems here...🤷♂️
@Isuf THAQI 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
Thanks for making such a great screen protector. Just put my 2nd one of these on, I love the wet system of putting on, it's so simple and after a week it's all cleared up and looks fantastic, I wouldn't use anything else 👍 perhaps just needs a warning that children would need help to install as it may be a child who wants to put this on their phone and would require assistance. Besides that all good 👍👍👍👍
Don't use the included solution (spigen spray bottle.) It contains glass cleaning stuff which does nothing at all. Just use water (distilled) spray instead. It will do the same job if not better cause then you can spray much more without worrying about emptying the spigen bottle.
@@marknadin8183 are you sure? are you 100% sure that the solution given is the exact same thing as water?
@@noorahmadlondon Yes. With distilled water, feel free to spray everywhere on your phone and the film as much as you like, allowing you to position the film on your phone correctly and EASIER.
With the included bottle, you can't literally spray everywhere. And if you made a mistake (I.e. film got your fingerprint or whatever) the included bottle will be less than half...
Remove the excess water and dry everything with microfiber cloth. May take hours for the water to completely dry.
idk if mine is a fake tbh....the packaging is different ...maybe its 2018 packaging differs i guess....
Don't try it for yourself,you would lose your mind.
Your cases are perfect, but the protectors are terrible.
Looks like a marvellous product!
Are there any other cases that are within my budget (£10) that work well with this Spigen screen protector?
Thank you 😊
Does it work with all cases or just cases made by spigen
I ordered one yesterday and today my Phone broke (one crack) can i still apply the screenprotector
Que es el liquido que viene con el protector? Casi se me agota y necesito comprar mas para colocar el otro protector que viene en el paquete
i applied today. it is very thin. i guess it only protect against minor scratches. i dont recommend this product. prefer a little thicker ones or full glue tempered glass.
Dont buy it, just dont
worst screen protector since invention
just buy the spigen cases those are pretty neat
but everything else coming from this brand is just straight up trash
I am most definitely a fan of Spigen cases but unfortunately I can't say the same for their screen protectors. i pre ordered the Note 8 and love the phone and the Spigen Tough Armor case I bought to protect it but...The Neo Flex screen protector is cut out too big! It overlays way to much.Outside of that the screen protector really looks great! It's a shame Spigen didn't pay attention to the detail dimension wise for the Note 8 otherwise I would highly recommend it. I'm going to upload a video on my TH-cam channel showing exactly what I'm talking about. I will post a link to the video in a reply as soon as I upload it. I hope Spigen will take note of this problem and correct an otherwise great screen protector.
Here is the link to the video I mentioned. It shows exactly what I'm talking about. th-cam.com/video/B5werMlak4o/w-d-xo.html
i'm reading the comments and I just ordered this yesterday...regrets
SallGood x How did it went lol
Where is the step of how you peel off the screen guard from the plastic its packed with without getting a fingerprint on any of it??
Did he/she put a water spray before applying the screen protector on the phone??
Looks like a cumbersome process to apply this type of screen protector. Definitely won’t be buying this one.👎🏻
so, naked?
@@SpigenWorld Nakedness was not an option. I used the Spigen GlastR sceen protector instead.👍🏻
@Spigen: Whats the reason for putting a Spigen case on before installation? Please let us know. For me it makes no sense at all..
It’s for better alignment
I have just applied the product today, it is amazing I would definitely recommend. There are however a few bubbles around that edges that appear to be multicoloured probably dude to the adhesive, do these disappear after a period of time?
GrayGamingPS4 yes, the liquid drys and disappears. I have had the screen protector on two weeks now and there is no problem. I had a slight liquid bubble at first, but it went away in a day.
it doesnt disappear thats the nature of TPU screen protector. For mine it has bubbles forever, you can completely remove it. Garbage product.
Idk about these screen protectors, but their cases are A1
18/6/19 i just applied the first one.
Device : Galaxy Note 9
Good thinks:
Sticks very strong on screen
i have good grip, even when my fingers are sweat they dont slip on.
I dont have bubbles on screen
Bad thinks :
I have mini rainbow on the entire screen.
Tips: if you want to peel off while applying to change positions or something else, make sure that you sprayed your device,nano flex,fingers and take a look on the flex to avoid little trashs that looks bad after finish.
Is better to start procedure when you will have clean hands, on a clean desk without A/C or open window in your room.
I will leave a comment tomorrow here with the newest, for any questions please comment down below.
How well does it work with the spen?
@@ApurvaJariwalaap12 Hello friend sorry for my late reply, i didn't leave second comment so long to make sure my feelings with the flex!
your question is how is the feel,typing,brownsing etc with S-pen.
The sensivity is same as without the flex,
except a few times that do not slip on the screen and make turbulence
(but i had that issue also before apply the flex)
on brownsing and gaming are very stable especially in drawing.
type message with S-pen is tha same as naked.
Now the other things is that i don't think that the rainbows disappeared from my screen but now it ok ... very comfortable at everything.
Focus only at apply moments to make sure for any trashs onto the flex.
i forgot to tell you that the flex is thicker than simple screen protectors, so far he has avoided two large and deep scratches from the first days, quite thick to protect against deep scratches!
will the rainbow effect go away because I just applied mine and it's bothering the help out of me???
Would anybody know what the liquid is? My phone has cracks and I am hesitant to apply the spray.
@@Jasperbell no it's not. It's just water.
I had it on now for my s8, it work wonderful.
I have seen bubbles...the video doesn't emphasis tat portion.....shame
This is a good screen protector. What liquid is that? Is it just water?
damn. i spent an hour just for this
works lovely. messed my first one up by not following the instructions
Does this grainy and bubbly appearance right after the whole installation proces goes away or what? Please, need a hand over here :(
did yours go away? I got that on mine
@@snakevenom4227 some of the bubbles went but some of'em stayed still
Used this.. My phone still has it 3 years later👍
Do u have any scratch on it?
but overtime (6 months+) the screen will eventually become less "clear" or more "wetty". When I re-apply a new one, it looks as new. How did you not experience this problem?
I got 2 today both was bad, 1 had dirt on it, The other one is outside The Phone on the edge so its peeling off on s20...
My Neo Flex HD for Galaxy S10+ came with 2 protectors in one box. The first one expanded before even 1 year. Just applied the second one, hopefully it would last longer.
so, hows the screen protector looking now?
So many negative ppl.... been using spigen products for atleast 6 years and they work amazing. The screenprotector at my old s5 still didnt had a scratch. The one for my s7 wasnt as great as for the s5 but the tough armor cases work like a charm. Might not be really cheap but its worth it when ur phone cost hundreds €. Ppl that complain €20 is to expensive and rather use €5~€10 are i guess the same ppl that will get on a motorcycle while wearing a t-shirt + shorts + slippers, all goes well till you get a accident 👎🏻
Look at the amount of spray he used.
Im ordering this today for my S9. Suggestion: use thin, mulated on hand rubber or silicone gloves.
suggestion: make a DIY spray solution with just distilled water. Idk why Spigen added cleaning stuff to thier solution (it does nothing in fact...)
Ask me a question: this Spigen screen protector covers the iris led sensor and the S8's proximity sensor. Does this pose any problems during use, such as putting your phone near your ear and the display still on (dialing with your ear)?
Can this be removed and reapplied say, 3 days after installation? Or only before the adhesive sets?
this has made my screen so grainy....is it temporary?
Yes it clears up, just takes time
step 29 .... do couple of push up and sit ups before reapplying... what is this a science project?
Looked pretty easy to me
Thank you
The solution is any protector with adhesive on the whole one side and cure it to the screen with uv light.
Is it UAG Friendly.?
Good thing it comes as a 2 pack because you're gonna fuck up the first one.
Bought it for s10, horrible, the screen is very grainy and the edges wont stick properly. Do not waste your money on this.
Why dont you tell that its blurry screen protector and it not actually stick to the sides. After 5-10 minutes of application, the sides starts to come off as its starts getting dry and hard to stick to screen.
I ran out of spray. What else I can use for its application?
Cum, lots of cum
@@Dyscrasia I ran out and used pre cum, probably didn't work as good as regular cum but it did the job.
My neoflex is on my phone for 3 days now. I can see small dust around the perimeter of the protector. Can I pull it off, and reapply the protector? I'm kinda obsessed about the neatness of my phone.
I read peoples reviews on Amazon and they said this wouldn't work with the Tough Armor Kickstand one.
Difficult
I for one will be glad when samsung drop gimmicky curved edges, a nightmare for armoured cases and application of screen protectors!
Spigen, is this screen protector compatible with Spigen Tough Armor case ?
My problems with it are as follows:
1. video is cut out way too much.
2. it is not as easy as in the video.
3. removing foil leaves fingerprints on foil even when spraying gel on fingertips.
4. dust is also stuck when the film is on the hand, when sprayed on the film, when cell phone is on the table, when film is to be put on display with movement.
5. after the gel comes out from sides, the sides are not glued.
6. after a few days the bubbles are still there!
7. removing and re-sticking needs gel and there is no gel left for the second foil.
8. a year ago I have successfully glued one piece without any difficulties. Now I have it very difficult. Is this due to material or beginner's luck?
can i use water instead of the solution? i ran out of it on the first try
Great question, yes it'd be best to mix it with a little bit of the fluid remaining. If you run out, feel free to let us know at support@spigen.com.
How can i rwturn this Things There was dust already sticking to the protector!!!!
that's your fault. use a room where there's no dust (well, not literally). i.e. a steamed room helps
Not sure I did this the right way.. there are still bubbles + the spray goes on the side that goes on the screen? How can that be possible? Im confused
whats inside the adhesion solution? theres not enough in the bottle to make up for mistakes, might have to make my own
Awesome protector, it looks like phove doesn't have any protector at all
I got a small crack area at one corner. I think this solution may not suit me as wet solution may seep into screen right? I looking for protector to reduce further damage
the tempered glass i bought from spigen,everything is fine except the center part, "rainbow/ghost " which i cant take it away even by pressing the part outside the tempered glass.
Worked great. Need to have patience
Just got one for my Note 8. Hope it works out.
I feel down. I'm now on my fourth screen protector and have been putting in on with the Spigen case but days later it always starts to pull away in the bottom left corner. I feel like I need a microscope to do it correctly :(