I was looking at Garrisons online until I saw this video and bought one last Friday. No sticking, no nothing.. immediately put a hundred flawless rounds through it and I couldn't be happier!
My wife bought me one over the weekend to replace an old Springfield Armory 1911 I had to sell to make our bills during the faucidemic. I have seen nothing but positive reviews. Your video was topnotch. It was very entertaining and informative at the same time. Keep up the great videos. I have taken my Garrison out to the range a couple times and it has been flawless. I have put 5 different types a ammo through it and not only no jams but it is a very accurate 1911! I love it. My brother turned me into a 1911 fan and I have zero regrets with the Garrison. Well made very simplistic but beautiful at the same time.
My experience mimics yours with the sticking of the slide. After around 100 rounds she is smooth as butter, I initially got the blued version but was so impressed with the accuracy and the fit and finish that I went back and purchased the stainless as well
Did you notice any difference between the blued and stainless version? I have the stainless and it has been excellent since the first shot. Only a few trips to the range so far. But it functions extremely well.
Mine did the same thing sticking out of the box brand new….100+ rounds and a good cleaning and oil and it all went away. Thing runs like a top…100% reliable. The salt blue is gorgeous…hooah 👍
after cleaning i can see it is NOT the serial number. It does not tick untill after the slide passed the disconnector. I can see marking in the frame where the guide rod and spring did some digging n and when disassembled it still sticks. It appears the frame and slide are sticking when the slide comes to the rear. they are not fitted well. they will wear or i can polish.
@@SGT1911 support from a Filipino subscriber, from the land of Rock Island Armory and Metro Arms. I hope you will make reviews of 1911 pistols from RIA and Metro Arms. Thanks in advance.
Bought my 1911 Garison 45 ACP SS 2 months ago. Took it apart and cleaned it. Oiled it and put it back together. Now have about 700 rounds through it. NOT ONE ISSUE with it. Wow what a nice firearm!! Very accurate out the box. My other 1911 Springfield is a Range Officer compact 4in 9MM 5 years old. Also, flawless. I prefer caring my 1911 over my 2 XDm's and XDs. Then again, I am 70 plus with 20 years military. Old people don't like much change LOL.
I have a couple XD's and prefer them hands down over most other polymer pistol and way more than a glock. I carried at 1911 most of my military career and still carry a 1911 today. I whitetail hunt with a range office. Love it
Went and fired my new Garrison just the other day. Was surprised at how easy it was to control considering I was going from a 9mm striker fired compact to a full sized all metal .45 ACP. Is a dream to shoot, incredibly accurate and stable. Gonna be carrying it as my EDC from now on.
I just recently added one of these to my collection. I got the stainless version only because I thought it would wear better as I definitely plan on carrying it in my rotation of 1911s. I did add a full length wilson combat guide rod and as with every 1911 I own I carry wilson combat magazines. It runs flawlessly and is very accurate. I also like that it's a series 70.
It's definitely a handsome 1911. They came out few months after I had picked up a plain Jane SA Mil Spec. I kicked myself for a little bit, but plain Jane has been 100% reliable & it's kinda nice to get back to the basics. But yeah, that Garrison is quite a nice pistol, that still turns my head.
I've got one and it also gets stuck when you rack the slide even without a magazine in the tube. After shooting it for about 200 rounds however, it seems to have loosened up and doesn't get stuck anymore. And the good thing is that she'd had no hiccups so far and has been running well.
I have really enjoyed my Stainless Garrison. I do wish I felt comfortable doing a trigger job myself and making it a little better. I did replace the slide release in mine with a Wilson Combat bulletproof. I also purchased the Bul Armory 9mm 1911 today, have seen good things about them.
That is great. You can do the trigger yourself. The secret Is "POLISH DO NOT REMOVE METAL" get VERY FINE paper and with patience rub and rub. Do not reshape you with get it. Watch my video in the library. Thanks for watching
@@SGT1911 Some real goober made that mistake "polishing" my Single Six, took off the whole sear engagement surface on the hammer and trigger, ruining both.
@@SGT1911 That's the plan, it's been sitting in my desk for a while now while I've been looking for a couple parts for it. It'll be nice when it's all done, though.
Hey bud 2 questions. Does it come with that stupid internal lock that came on my last Springfield 1911? Also does it have a series 70 or series 80 style firing system? Thank you
No lock, no series 80. It is a plan 1811, most woukd call a series 70. Some go Into other models, I don't. For example a 1965 they call a series 60 etc. All bs to me. 70 and earlier are 70' and only the 80' parts male them a series 80 regardless is made in 1989 or 2015. Thanks for watching
I just brought home a Garrison in stainless steel. I had that sticking issure for a bit, and then tore it down and used gun grease, along with oil on parts I couldn't directly get to. The gun not only functioned easier on every manual thing (moving the bushing to the side, racking, removing and replacing the slide stop, etc.) but I haven''t had the issue here. I have not shot it yet, but grease and oil went a long way.
This is exactly how I like my 1911s. Blued, no FCS, just the right enhancements. The Springfield Professional is my favorite pistol but I can't afford that one right now. So this is about just right for me.
Need to get me one of these. Just now diving into 1911’s and picked up a basic rock island 1911a1. Probably buy one of these and if I’m still liking them I’ll buy a higher end brand.
I have a blued garrison in 45 and a stainless garrison in 9mm. My thinking is that the slide gets hung up on the disconnector. Mine stick there but not quite as bad as yours.
Nice review! Growing up, every gun cabinet I remember had a bluing kit in it. Old school blue is a beautiful colour. Just bought one of these garrisons. Retail was $1250 CAD. Needed something solid, as it has to last my lifetime, thanks to True-Dough.
Thinking of getting my first 911. What is your opinion on what springfield tried to pull here in Illinois a few years ago. Should I consider one of their pistols?
It is my opinion the CEO OF SPRINGFIELD opened his mouth before thinking. I have to think it was a mistake that has cost the business untold amounts of money. Basically, he paid for it. The SPRINGFIELD 1911's are good ones. The SPRINGFIELD 1911's are some of the best. Remember, we usually get what we pay for. I don't have a problem buying one. Thanks for watching
I have two 5” models bought 9 years ago. Both worked perfectly from day one. They weren’t cheap. I love taking feral pigs with them. Both have tritium night sights. One lays on my night table right next to my bed.
It may be. I have not looked. I have never had one do that. The engraving is so small, not deep. But possible. I have not had it happen in others with the engraving. I Will let you know. Thanks
@@andog6092 I still have not disassembled and cleaned yet. I will see. Those are some serious engravings if so. I have never had another springfield do this. Could be. Thanks for watching
The last three Springers I've bought including $1200. Emissary hung up like yours. My problem was the trigger disconnector really stiff. Slide face hangs up on it. It will work out or you can file a 45 degree angle on slide face, as to glide over it more smoothly. What bothers me with the Springers nowdays is the thumb safeties feels like a sponge when in the "off" position. But guess all these things keeps the price point down.
It seems most come in just under or at 5. Out the box I think the Sig 1911's have the most consistent at 4 +- this garrison ibdont really remember it has been so long. Thanks for watching
My local gun store has two of these, one new, one used, $749 n and $649u. They felt so mint! If I wasn't on lunch, I'd have grabbed one. They had pmc .45 for $25/50. Nice video! Great fun. Thanks for sharing this.
@@SGT1911 I did! $769 for a new one. The slide is a little sticky. I've got plenty of ammo to help loosen that up heheh! I'm looking forward to trying it.
I have a Custom Royal Kimber.45 acp. Now I want a Garrison! Have to wait until they get rid of the handgun roster in Ca. Lawsuits already to go Bruin decision to kick in🦅🇺🇸
SGT 1911, great video as always. I have been considering swapping to a 1911 for carry. What do you recommend? If you have a video of your carry gun of choice, I'd be very interesting in checking it out.
I have carried a Colt Comander for years recently moved to a Sig Nightmare. I have carried a Nighthawk the last month or so. I did order a Ed Brown Kobra Carry. All in 45 acp. Occasionally I carry a XDs or a Shadow Systems if I plan to get dirty. All if there have videos, except the Ed Brown which I have nor gotten yet. Thanks for watching
Very Nice Sarge I like it and your right anyone wanting to get into a 1911 , this seems like a good choice just to grab a 1911 if u dont want to spend more $ on the custom stuff
I was thinking of getting a Springfield Operator but after seeing this video I gotta say I might save some money and get the Garrison, Thanks for showing us a nice 1911 that seems to get the job done even though it doesn't break the bank.
It just needs a break in Sarge. I owned a Series 70 Government Model Colt several years ago and regretted having to sell that pistol. When Springfield Armory released the Garrison on the market over a year ago I looked at it and thought WOW 🤩 here’s a traditional looking 1911 with the tweaks that I would make while keeping the look of a Government Model. As a mid tier 1911 I get the impression that overall the Garrison is a well put together QUALITY pistol. They were selling initially for 1,100-1,300 here at home when they first came out. I found one while visiting a friend on vacation in KY for 750. I bought that one in a New York second and made arrangements to ship it to my local FFL at home for the transfer/paperwork and will pick it up this weekend. I love the deep glossy blue finish and am really looking forward to the break in and loosening it up a little. Can’t wait to shoot this one. Thanks Sarge for the review. Be safe.
I opened it up, and the guide rod was really dragging bad on the frame. It's kind of like it was oversized. Sa des the guiderod some and now it runs like a champ. Thanks for
That sticking is probably the disconnector against the bottom of the breach face. I have 4 Loadeds and 3 Garrisons and they almost all do that out of the box where they don’t want to slip over that disconnector.
As I recall Springfield’s 1911 are forged receivers & slides. A good thing for wear & tear. It is my hope that there are no MIM parts. It should be noted your knowledge on 1911s is very good. Thank you for your videos. 👍😊🇺🇸
You are 100% correct, they are forged. Thank you for your comment. I was trained by the Army 40+ Years ago and have been collecting and building 1911's for many years. Thank you for watching
@Dale Ross I own several 1911s. My Ruger S/S shattered the front sight with less than 1000 rounds. Ruger replaced same. I was advised that the front sight was a MIM part. Having carried a 1911 for many years in my government job I had no issues with my 1911s. However, they we’re no MIM parts in same. 👍😊🇺🇸
@Dale Ross Thank you for your response back. Good info. My Les Baer has no issues & 1911s my son built for me have no issues. Having used 1911s in fire fights I never saw a failure from mine or other colleagues. They are a fine piece of equipment!👎😊🇺🇸
They’ve made the enhancements with the match grade barrel and bushing in the right places Sarge. The Novak style sights, slide serrations that mirror the grip angle and the enlarged hammer safety. Yet it maintains the appearance of a Series 70 Government Model. What’s not to like. When I first saw the Garrison a bit over a year ago I fell in love with it. It has the look and feel of a good quality pistol ( mid tier) without the 3,000 dollar price tag of a Wilson Combat. Just like the Mossberg 590SP that I bought new that 1911 will break in nice and be buttery smooth with a break in of 300-500 rounds. Watch and see if she doesn’t get as smooth as oiled silk. It’s obviously a good quality pistol. An heirloom gun that gets passed on.
The stainless steel garrison I looked at in the gun shop was sticking open like that one, and racking the slide was rough also. But I looked at it again a month later and it seemed to be a little smoother. The grips and bushings would have to be replaced with standard grips and bushings. I would definitely want to replace the hammer with a Wilson combat stainless steel retro commander hammer, but that's just what I like.
After cleaning I can clearing see the guide rod had been hanging up in the slide as well as the slide and frame wearing against each other. It is NOT the serial number dragging on the disconnector as some have suggested. It MAY be on some, but this pistol completely sticks when all the way back, past the disconnector. Shoot it. That will fix it. the shop could have done a better job. Thanks for commenting. Now you can buy the stainless model. Thanks for watching
Great review…thanks for sharing. I don’t own a 1911 yet but looking to add one to the stable. Only other 45 ACP that I have is a Ruger P90 that I picked up years ago. Don’t want to spend a lot but don’t want a budget gun either. Liked and subscribed 👍 Hooah
Every gun enthusiast in America should have at least one 1911. The weapon has been defending our country for over 100 years. All things considered, in the end it is still the finest handgun ever produced.
Yep mine also was doing the same thing it needed to be broken in a little bit i actually needed a brushing wrench to takedown mine but it all loosen up over time 💪👍
Having watched almost to the end, and seeing the problems you've run into, I believe Springfield Armory has a QA problem that they have to address on 1911 production. Because of your experience and realization of what is likely going on, you aren't alarmed or overly concerned about correcting these details. They aren't daunting to you. But Springfield should be very concerned about the average buyer and gun owner. You ain't him! And he might (probably) doesn't know you are on TH-cam, to learn from. Most people won't know that just running the gun will clear up most problems of dependability. I have two Croatian creations from Springfield Armory: my favorite, the XDm 4.5 in .45acp, which has been flawless and is a peach to shoot AND very accurate; and my Hellcat OSP. The Hellcat trigger has an engineering flaw, in that the hinge point of the trigger safety is not high enough from the bottom of the trigger, allowing the trigger to be pulled enough aft before the safety lever clears its lock, and the result is that the trigger is locked rock solid. The trigger safety works!!!!!! In the event of a life-threatening situation, your assailant will be safe! Condolences to your family. The Apex trigger upgrade solves the problem. (I'll be glad to go into detail for anybody interested) Both of the XD guns (the Hellcat is really just a baby of...), included a test-target. It only serves to let you know the gun shoots repeated rounds and an MOA. I'm thinking that the USA manufactured 1911s should also go through some firing before being boxed. I'd buy a Springfield in a heartbeat if I had the cash and inclination. The Sarge puts things in perspective, if viewers pay attention. This is all just my opinion of course, but is based on my experience. Thanks again for a learning video.
I would say YES. However, not by a mile, just slightly. You will notice it in the price difference above other qualities. Then you move the Loaded Operator.
The more I see these 1911s the more im liking them that looks like that would be fun to shot that would be a nice working man's Cadillac peace 👍🇺🇸🇺🇸🇺🇸🇺🇸
@@SGT1911 I have it down to a science. Years back I ruined a few in the beginning by removing too much metal at the bottom. It takes me about a half an hour to do that job at this point. I apprenticed to a gunsmith and have an associates degree in Gunsmithing with 32 years of experience at this point.
@@SGT1911 I spent 22 years as an Army Aviator. If not for that I would have never been able to get the technical background to become a Gunsmith in the first place.
It I'd pretty plain, but it fixed have the novice style sights. One of my favorite right now. Everything you need and nothing you don't thanks for watching
New subscriber, great review, I have it in stainless, and for the $, it's a dream, thank u from nyc, great channel, have shared your video, friends love your opinion, it right on the money
@@johnkizziah108 keep shooting, it will wear together, I'd that makes sense. Thise moving parts that are mated together will get slicker over time. Thanks for watching
@@SGT1911 Lucked up for some .357 ammo yesterday , get a box for 39.00 and the rest was 70.00 bucks a box with tax at Academy. I get me some stuffed flounder and lobster after that.
@@leonardboufford282 I'm going to go on a hunch and say probably for all the same reasons you decided to keep it in the safe all this time instead of getting rid of it.
You’re definitely not a young guy and seem to present yourself as though your into guns, you even have 1911 in your channel name. But yet you seem confused on what blueing is on a firearm. Not really sure what to think. Either you are like so many other “guntubers” who just got into guns to make money off the industry and have no real knowledge or you are about the only 1911 guy that doesn’t know what blueing is.
![[LIVE] BABYMONSTER(베이비몬스터) - DRIP | 두시탈출 컬투쇼](http://i.ytimg.com/vi/UG05pxLGwzc/mqdefault.jpg)
I was looking at Garrisons online until I saw this video and bought one last Friday. No sticking, no nothing.. immediately put a hundred flawless rounds through it and I couldn't be happier!
Great. I have not fired mine again
I dodbckean it ans see where the slide and frame were drawing. It just need broken in. Shoot safe
Good on you! Don't always work out like that.
My wife bought me one over the weekend to replace an old Springfield Armory 1911 I had to sell to make our bills during the faucidemic. I have seen nothing but positive reviews. Your video was topnotch. It was very entertaining and informative at the same time. Keep up the great videos.
I have taken my Garrison out to the range a couple times and it has been flawless. I have put 5 different types a ammo through it and not only no jams but it is a very accurate 1911! I love it. My brother turned me into a 1911 fan and I have zero regrets with the Garrison. Well made very simplistic but beautiful at the same time.
I am trying thanks and thanks for watching
My experience mimics yours with the sticking of the slide.
After around 100 rounds she is smooth as butter, I initially got the blued version but was so impressed with the accuracy and the fit and finish that I went back and purchased the stainless as well
Way to go. The Springfields are always good quality. Can't go wrong. Thanks for watching
Did you notice any difference between the blued and stainless version? I have the stainless and it has been excellent since the first shot. Only a few trips to the range so far. But it functions extremely well.
Love my Springfield Mil-spec.
All you need. Thanks for watching
My next purchase,Springfield makes awesome hand guns!
Yep, they make some nice stuff. shoot safe.
Mine did the same thing sticking out of the box brand new….100+ rounds and a good cleaning and oil and it all went away. Thing runs like a top…100% reliable. The salt blue is gorgeous…hooah 👍
Hooah!
after cleaning i can see it is NOT the serial number. It does not tick untill after the slide passed the disconnector. I can see marking in the frame where the guide rod and spring did some digging n and when disassembled it still sticks. It appears the frame and slide are sticking when the slide comes to the rear. they are not fitted well. they will wear or i can polish.
I bought my Garrison a few months ago and absolutely love it. It’s very accurate and reliable.
I agree 100% great handgun. Thanks for watching
The 1911 will always remain legendary and reliable despite the popularity of wonder nine pistols
Perfectly said. Thanks for watching
@@SGT1911 support from a Filipino subscriber, from the land of Rock Island Armory and Metro Arms. I hope you will make reviews of 1911 pistols from RIA and Metro Arms. Thanks in advance.
@@blitzzkrieg1400 I can do a RI for sure. Thanks for subscribing and thanks for watching
@@blitzzkrieg1400 we just filmed the RI video. It will be put in the near future
Thanks for watching
1911’s are Fantastic!! I am an owner 30 times over. It’s real, and please enjoy if you have one. 🤠👮🏻♂️👍🇺🇸👻
B9USA Sr.
Bought my 1911 Garison 45 ACP SS 2 months ago. Took it apart and cleaned it. Oiled it and put it back together. Now have about 700 rounds through it. NOT ONE ISSUE with it. Wow what a nice firearm!! Very accurate out the box. My other 1911 Springfield is a Range Officer compact 4in 9MM 5 years old. Also, flawless. I prefer caring my 1911 over my 2 XDm's and XDs. Then again, I am 70 plus with 20 years military. Old people don't like much change LOL.
I have a couple XD's and prefer them hands down over most other polymer pistol and way more than a glock. I carried at 1911 most of my military career and still carry a 1911 today. I whitetail hunt with a range office. Love it
Went and fired my new Garrison just the other day. Was surprised at how easy it was to control considering I was going from a 9mm striker fired compact to a full sized all metal .45 ACP. Is a dream to shoot, incredibly accurate and stable. Gonna be carrying it as my EDC from now on.
I am glad you like it. Most do after they shoot one. Keep shooting and thanks for watching
I just recently added one of these to my collection. I got the stainless version only because I thought it would wear better as I definitely plan on carrying it in my rotation of 1911s. I did add a full length wilson combat guide rod and as with every 1911 I own I carry wilson combat magazines. It runs flawlessly and is very accurate. I also like that it's a series 70.
Nice. Thanks for watching
I trying to get the stainless and I can't find one anywhere.
It's definitely a handsome 1911. They came out few months after I had picked up a plain Jane SA Mil Spec. I kicked myself for a little bit, but plain Jane has been 100% reliable & it's kinda nice to get back to the basics. But yeah, that Garrison is quite a nice pistol, that still turns my head.
That is my luck. But a new pistol and fi d it cheaper the next day. You did get a shooter though for sure. Stay safe
I've got one and it also gets stuck when you rack the slide even without a magazine in the tube. After shooting it for about 200 rounds however, it seems to have loosened up and doesn't get stuck anymore. And the good thing is that she'd had no hiccups so far and has been running well.
Ben, that is what i was thinking. Noting serious. Just new. Thanks for watching
I have really enjoyed my Stainless Garrison. I do wish I felt comfortable doing a trigger job myself and making it a little better. I did replace the slide release in mine with a Wilson Combat bulletproof. I also purchased the Bul Armory 9mm 1911 today, have seen good things about them.
That is great. You can do the trigger yourself. The secret Is "POLISH DO NOT REMOVE METAL" get VERY FINE paper and with patience rub and rub. Do not reshape you with get it. Watch my video in the library. Thanks for watching
@@SGT1911 Some real goober made that mistake "polishing" my Single Six, took off the whole sear engagement surface on the hammer and trigger, ruining both.
Dang. Now just replace it all
@@SGT1911 That's the plan, it's been sitting in my desk for a while now while I've been looking for a couple parts for it. It'll be nice when it's all done, though.
@@Vostok7789 great plan
I almost bought the stainless version the other day. It’s beautiful! 👍🏻
Yes it is. I have a friend with a stainless Garrison it is eye candy. Thanks for watching
Hey bud 2 questions. Does it come with that stupid internal lock that came on my last Springfield 1911? Also does it have a series 70 or series 80 style firing system? Thank you
No lock, no series 80. It is a plan 1811, most woukd call a series 70. Some go Into other models, I don't. For example a 1965 they call a series 60 etc. All bs to me. 70 and earlier are 70' and only the 80' parts male them a series 80 regardless is made in 1989 or 2015. Thanks for watching
I just brought home a Garrison in stainless steel. I had that sticking issure for a bit, and then tore it down and used gun grease, along with oil on parts I couldn't directly get to. The gun not only functioned easier on every manual thing (moving the bushing to the side, racking, removing and replacing the slide stop, etc.) but I haven''t had the issue here. I have not shot it yet, but grease and oil went a long way.
Yeah it helps. Don't be surprised if it need to run some. All good.
Thanks Sarg, you have helped me make up my mind. Does this pistol come in a series 70, or only the series 80??? Thank you Sir!!..
70 series
This is exactly how I like my 1911s. Blued, no FCS, just the right enhancements. The Springfield Professional is my favorite pistol but I can't afford that one right now. So this is about just right for me.
This is a nice handgun. Everything you need and nothing more. Thanks for watching
Need to get me one of these. Just now diving into 1911’s and picked up a basic rock island 1911a1. Probably buy one of these and if I’m still liking them I’ll buy a higher end brand.
This idea nice handgun. Thanks for watching
I have a blued garrison in 45 and a stainless garrison in 9mm. My thinking is that the slide gets hung up on the disconnector. Mine stick there but not quite as bad as yours.
Mine was the guide rod dragging in the frame. I smootes it down some with sand paper. Take a look at scaring in the frame.
Your Videos Continue To Improve. This is a Great 1911 Pistol for the Money.
Stay Safe! 🤠👮🏻♂️👍🇺🇸👻
B9USA Sr.
You bet it is for the money. All you need and no more. Thank You, and Thanks for watching
I bought a couple MecGar mags for my Garrison they seem to work very well in it.
Great. Thanks for watching
Nice review!
Growing up, every gun cabinet I remember had a bluing kit in it. Old school blue is a beautiful colour.
Just bought one of these garrisons. Retail was $1250 CAD. Needed something solid, as it has to last my lifetime, thanks to True-Dough.
Great Cranky. Nice hand guys to have around
As always another great review Sarge! Just bought my 6th 1911, most beautiful pistol made! Thank You for your service Sir!
Could be. Ii have not looked yet
Thanks for watching
I understand the addiction. I am at 30 and 2 more on order as of June 2022.
Great Stuff Guys! 🤠👍🇺🇸👻
B9USA Sr.
@@BERETTA9mmUSA lol. Its terrible. But, I could be addicted to other stuff, I happy with my problem
I'm contemplating getting another 1911 myself.
@@rickyflinchum2909 a person can never have enough 1911's
Thinking of getting my first 911. What is your opinion on what springfield tried to pull here in Illinois a few years ago. Should I consider one of their pistols?
It is my opinion the CEO OF SPRINGFIELD opened his mouth before thinking. I have to think it was a mistake that has cost the business untold amounts of money. Basically, he paid for it. The SPRINGFIELD 1911's are good ones. The SPRINGFIELD 1911's are some of the best. Remember, we usually get what we pay for. I don't have a problem buying one. Thanks for watching
A good mil spec like this one is a foundation to build a nice custom handgun. Great review sgt.
Thanks for watching
I have two 5” models bought 9 years ago. Both worked perfectly from day one. They weren’t cheap. I love taking feral pigs with them. Both have tritium night sights. One lays on my night table right next to my bed.
Fun stuff. Pigs ans pistols. Thanks for watching
The sticking is from the last three of the serial number being engraved on the striping block. The head of this disconnector is hanging up on it.
It may be. I have not looked. I have never had one do that. The engraving is so small, not deep. But possible. I have not had it happen in others with the engraving. I Will let you know. Thanks
He is right my mil spec and garrison did the same thing. Honestly not that bad though, I have never seen that
@@andog6092 I still have not disassembled and cleaned yet. I will see. Those are some serious engravings if so. I have never had another springfield do this. Could be. Thanks for watching
Just watched 10-8 performance review on 9mm Ronin, mentions the same issues.
@@nickestep7920 I need to watch it. Thanks
The last three Springers I've bought including $1200. Emissary hung up like yours. My problem was the trigger disconnector really stiff. Slide face hangs up on it. It will work out or you can file a 45 degree angle on slide face, as to glide over it more smoothly. What bothers me with the Springers nowdays is the thumb safeties feels like a sponge when in the "off" position. But guess all these things keeps the price point down.
My guide rod was dragging bug time in the frame. Butchered it some. Sanded it some a d fine now
I’ve got a Colt Govt model and that has an awesome trigger. How does this SA pistol trigger compare if you can say?
It seems most come in just under or at 5. Out the box I think the Sig 1911's have the most consistent at 4 +- this garrison ibdont really remember it has been so long. Thanks for watching
Springfield Armory Garrison 1911. Offers every thing want nothing I do not want. That why gone buy as my next handgun. Great review enjoy very much.
Thanks for watching
My local gun store has two of these, one new, one used, $749 n and $649u. They felt so mint! If I wasn't on lunch, I'd have grabbed one. They had pmc .45 for $25/50.
Nice video! Great fun. Thanks for sharing this.
Go back Bro. Good prices
@@SGT1911 I did! $769 for a new one. The slide is a little sticky. I've got plenty of ammo to help loosen that up heheh! I'm looking forward to trying it.
@@J1Z06 excellent. I had to let mine wear some before it became really nice. Congrats
I have a Custom Royal Kimber.45 acp. Now I want a Garrison! Have to wait until they get rid of the handgun roster in Ca. Lawsuits already to go Bruin decision to kick in🦅🇺🇸
A roster is BS. We are Free Americans. Not schakled citizens
"Time keeps on slippin', slippin', slippin', ...into the future."
SGT 1911, great video as always. I have been considering swapping to a 1911 for carry. What do you recommend? If you have a video of your carry gun of choice, I'd be very interesting in checking it out.
I have carried a Colt Comander for years recently moved to a Sig Nightmare. I have carried a Nighthawk the last month or so. I did order a Ed Brown Kobra Carry. All in 45 acp. Occasionally I carry a XDs or a Shadow Systems if I plan to get dirty. All if there have videos, except the Ed Brown which I have nor gotten yet. Thanks for watching
@@SGT1911 Thank you for the quick response, sir! I enjoy our videos and just subscribed. Keep it up!
@@johnfarley5368 thank you. I appreciate it
Very Nice Sarge I like it and your right anyone wanting to get into a 1911 , this seems like a good choice just to grab a 1911 if u dont want to spend more $ on the custom stuff
Excatly Eddie. Hope you are well and thanks for watching
Would you take this over a full-sized Ruger SR1911?
Yes, probably. I really like the Garrison
I was thinking of getting a Springfield Operator but after seeing this video I gotta say I might save some money and get the Garrison, Thanks for showing us a nice 1911 that seems to get the job done even though it doesn't break the bank.
I think it is everything you need. Good value. Thanks for watching
@@SGT1911 and no ambi safety!
@@bub1408 lol. Right
Just sent mine off to be high polished it runs great VERY accurate and it stacks up to my Kimber TLE II for sure
I like my springfield. Thanks for the Input and thanks for watching
It is a nice 1911 for someone just wanting a more basic traditional style 1911. A great review as always!
Thanks for watching!
It just needs a break in Sarge. I owned a Series 70 Government Model Colt several years ago and regretted having to sell that pistol. When Springfield Armory released the Garrison on the market over a year ago I looked at it and thought WOW 🤩 here’s a traditional looking 1911 with the tweaks that I would make while keeping the look of a Government Model. As a mid tier 1911 I get the impression that overall the Garrison is a well put together QUALITY pistol. They were selling initially for 1,100-1,300 here at home when they first came out. I found one while visiting a friend on vacation in KY for 750. I bought that one in a New York second and made arrangements to ship it to my local FFL at home for the transfer/paperwork and will pick it up this weekend. I love the deep glossy blue finish and am really looking forward to the break in and loosening it up a little. Can’t wait to shoot this one. Thanks Sarge for the review. Be safe.
I opened it up, and the guide rod was really dragging bad on the frame. It's kind of like it was oversized. Sa des the guiderod some and now it runs like a champ. Thanks for
I’ll keep an eye out for that Sarge. I’m picking mine up today. Take care Sarge and enjoy the day. 👍🫡🇺🇸⚓️USN. Vietnam era.
Hooah
That sticking is probably the disconnector against the bottom of the breach face. I have 4 Loadeds and 3 Garrisons and they almost all do that out of the box where they don’t want to slip over that disconnector.
Nope it was the guide rod dragging in the frame. I sanded it and all is well. Thanks for watching
A great review Sarge. I really like that .45… and I wouldn’t ever want you shooting at me, lol! Thanks, man.
Keep ‘em comin’
Thanks for watching
Awesome commentary thankyou.
Thanks for watching Fred. I appreciate it
Springfield does a great job with their 1911 models. Thanks for your review Sgt1911!
Yes they do. Always consistent and great customer service
@@SGT1911 Did you say only one magazine with it? If so, that's disappointing for springfield to do.
@@johnvanb3795 yep, I only got 1
@@SGT1911 Hopefully they haven't copied Colt on doing that. No malfunctions even with that slide hangup though 👍
@@johnvanb3795 none. Better every mag. I will eventually break it down to clean and get a better look
Sarge my wife just bought herself a stainless Garrison in 9mm, her 1st 1911. Gotta love a woman that loves to shoot and wants a 1911!
Man. that is Awesome. Did she get you one Too?
@@SGT1911 nope, I have 7. But I think she will let me shoot it. LOL
@@billtshudy3653 watch out. She may get hooked and you may have 6 etc. Let me know how she likes it
@@SGT1911 hey Sarge, she LOVES it! And don'y worry, she will let me buy more!!! Thanks for your Service Sir.
@@billtshudy3653 that's great Bill. You guys stay safe
As I recall Springfield’s 1911 are
forged receivers & slides. A good
thing for wear & tear. It is my hope
that there are no MIM parts. It
should be noted your knowledge
on 1911s is very good. Thank you
for your videos. 👍😊🇺🇸
You are 100% correct, they are forged. Thank you for your comment. I was trained by the Army 40+ Years ago and have been collecting and building 1911's for many years. Thank you for watching
@Dale RossDale, ot good to see great comments. Some don't know thier ass from a hole in the ground You and a few others do. Stay safe
@Dale Ross I own several 1911s.
My Ruger S/S shattered the front
sight with less than 1000 rounds.
Ruger replaced same. I was
advised that the front sight
was a MIM part. Having carried
a 1911 for many years in my
government job I had no issues
with my 1911s. However, they
we’re no MIM parts in same. 👍😊🇺🇸
@Dale Ross Thank you for your response back. Good info. My
Les Baer has no issues & 1911s
my son built for me have no issues.
Having used 1911s in fire fights
I never saw a failure from mine or
other colleagues. They are a fine
piece of equipment!👎😊🇺🇸
@Dale Ross Amen👍😊🇺🇸
Very nice review. Three is a new bul armory government .45. Can You make review about it?
Sure, if i can get my hands on one
just bought mine, it’s unbelievable how much better of a weapon it is than the kimber shadow ghost i also just bought
It will not disappoint. Thanks for watching
@@SGT1911 did you ever get yours to stop binding, mine is doing it now
@@irelandssons No, I have not. I did clean it and see where the guide rod send during had jammed up. Sldo my slide and frame are not fitting
They’ve made the enhancements with the match grade barrel and bushing in the right places Sarge. The Novak style sights, slide serrations that mirror the grip angle and the enlarged hammer safety. Yet it maintains the appearance of a Series 70 Government Model. What’s not to like. When I first saw the Garrison a bit over a year ago I fell in love with it. It has the look and feel of a good quality pistol ( mid tier) without the 3,000 dollar price tag of a Wilson Combat. Just like the Mossberg 590SP that I bought new that 1911 will break in nice and be buttery smooth with a break in of 300-500 rounds. Watch and see if she doesn’t get as smooth as oiled silk. It’s obviously a good quality pistol. An heirloom gun that gets passed on.
The guide rod was really digging into the frame. scared the frame bad. i sanded it smooth and it nice now
The stainless steel garrison I looked at in the gun shop was sticking open like that one, and racking the slide was rough also. But I looked at it again a month later and it seemed to be a little smoother. The grips and bushings would have to be replaced with standard grips and bushings. I would definitely want to replace the hammer with a Wilson combat stainless steel retro commander hammer, but that's just what I like.
After cleaning I can clearing see the guide rod had been hanging up in the slide as well as the slide and frame wearing against each other. It is NOT the serial number dragging on the disconnector as some have suggested. It MAY be on some, but this pistol completely sticks when all the way back, past the disconnector. Shoot it. That will fix it. the shop could have done a better job. Thanks for commenting. Now you can buy the stainless model. Thanks for watching
Great review…thanks for sharing. I don’t own a 1911 yet but looking to add one to the stable. Only other 45 ACP that I have is a Ruger P90 that I picked up years ago. Don’t want to spend a lot but don’t want a budget gun either. Liked and subscribed 👍 Hooah
Thank you. This Springfield may be your answer. Thanks for watching
Debating between this one and the Mil-Spec. Either way, one of these 1911s will be my next purchase.
I prefer the Garrison. It has a FEW extras over the Milspec.
Sir it aint nothing like having fun with a good old fashioned 1911 45 ACP👍👍👍👍🙂
Damn right bro. Thanks for watching
Sarge , that one check all the boxes for me personally. Do you know if it comes in a commander size ? Keep ‘em coming brotherman .
Not sure, but I can keep a look out. Thanks for watching
I've written SA and asked if they have any plans for a commander sized Garrison a few months ago.....crickets.
Picking my stainless garrison up Wednesday. Going to clean it, oil her up before going to the range...
nice. enjoy
My uncle bought one in 9
And damned if I didn’t fall in love with it
The Garrison is a nice handgun. Thanks for watching
Every gun enthusiast in America should have at least one 1911. The weapon has been defending our country for over 100 years. All things considered, in the end it is still the finest handgun ever produced.
100% agree
Just found this channel. Damn glad I did.
Great. Thanks for watching.
Yep mine also was doing the same thing it needed to be broken in a little bit i actually needed a brushing wrench to takedown mine but it all loosen up over time 💪👍
I figured so. Mine has loosened up some but I have not shot it since cleaning. It is dragging on the idea in one spot. It will loosen up. Thanks for
@@SGT1911 no problem sir!! These Springfield s are fine 1911s i have 2 Ronins and this garrison
@@ctsmith9225 all nice handguns
@@SGT1911 yep. My government model Ronin is in 10mmauto and my LW commander is in 45acp!
@@ctsmith9225 I think my Ronin is 10mm if I remember correctly
Having watched almost to the end, and seeing the problems you've run into, I believe Springfield Armory has a QA problem that they have to address on 1911 production.
Because of your experience and realization of what is likely going on, you aren't alarmed or overly concerned about correcting these details. They aren't daunting to you.
But Springfield should be very concerned about the average buyer and gun owner. You ain't him! And he might (probably) doesn't know you are on TH-cam, to learn from. Most people won't know that just running the gun will clear up most problems of dependability.
I have two Croatian creations from Springfield Armory: my favorite, the XDm 4.5 in .45acp, which has been flawless and is a peach to shoot AND very accurate; and my Hellcat OSP.
The Hellcat trigger has an engineering flaw, in that the hinge point of the trigger safety is not high enough from the bottom of the trigger, allowing the trigger to be pulled enough aft before the safety lever clears its lock, and the result is that the trigger is locked rock solid. The trigger safety works!!!!!! In the event of a life-threatening situation, your assailant will be safe! Condolences to your family. The Apex trigger upgrade solves the problem. (I'll be glad to go into detail for anybody interested)
Both of the XD guns (the Hellcat is really just a baby of...), included a test-target. It only serves to let you know the gun shoots repeated rounds and an MOA.
I'm thinking that the USA manufactured 1911s should also go through some firing before being boxed.
I'd buy a Springfield in a heartbeat if I had the cash and inclination. The Sarge puts things in perspective, if viewers pay attention.
This is all just my opinion of course, but is based on my experience.
Thanks again for a learning video.
JR. I also have a couple of XD'S and they are rock solid pistols. They are far superior to any glock. Thanks for the comment and shoot safe
Sgt is the springfield operator really a step above the Garrison?
I would say YES. However, not by a mile, just slightly. You will notice it in the price difference above other qualities. Then you move the Loaded Operator.
@@SGT191110 4 thanx.
@SGT1911 I have a Springfield armory elite ro in 10mm I like it so I was thinking of getting it in 45, which would be the operator model.
@@sgtbones1837 I have one in 10mm as well. Shot maybe 30 rnd through it
@SGT1911 I know you are not a fan of the rail me either but if it shots like the 10 I'll take it.
Springfield does a nice job on the 1911's that I have seen...
Yep, they always do. Thanks for watching
The more I see these 1911s the more im liking them that looks like that would be fun to shot that would be a nice working man's Cadillac peace 👍🇺🇸🇺🇸🇺🇸🇺🇸
I really Ike this handgun. Like a nice lady, sexy, not trashy.
Great review!👍
Thank you and thanks for watching
Nice blueing. I need an ambi safety, takes just a little bit of time to install. Great carry gun.
Good thing the ambi can be installed for you south paws. Thanks for watching
@@SGT1911 I have it down to a science. Years back I ruined a few in the beginning by removing too much metal at the bottom. It takes me about a half an hour to do that job at this point. I apprenticed to a gunsmith and have an associates degree in Gunsmithing with 32 years of experience at this point.
@@ScottAT awesome. My first real training was in the Army. I trained on U.S. and Soviet small arms. Been having fun since
@@SGT1911 I spent 22 years as an Army Aviator. If not for that I would have never been able to get the technical background to become a Gunsmith in the first place.
Thinking about trading my Kimber in for this
I like the Garrison better than Kimber, but I hate to let any 1911 go.
Chamfer is probably more accurate than bevel. But it is there regardless of nuance.
Thanks for another demonstration.
Thanks for watching
Looks like a Range Officer with Novac style sights.
It I'd pretty plain, but it fixed have the novice style sights. One of my favorite right now. Everything you need and nothing you don't thanks for watching
I have 2,000 rounds already no problems I want another one
I doubt you ever will. Shoot safe
Nice video honest assessment 👍
Thanks Steve. I hope you are recovering
New subscriber, great review, I have it in stainless, and for the $, it's a dream, thank u from nyc, great channel, have shared your video, friends love your opinion, it right on the money
Thanks Rick. I appreciate it. Stay sage and stay with me for more no BS reviews
I find myself really liking this 1911. Not sure why
Classic look. Thanks for watching
waiting for the Tisas A1 us army review. watch the factory video. out
Gonna try to do it asap
Thank for watching
Can't beat a Springfield!!!!
They are always solid
Like springfields bought one of these this morning..
Great: Springfields have proved to be a sure bet. Let me know how it goes. Thanks for watching
Shot it a bunch this morning. Really accurate loves 200 SWC bullets. I'll need to put a short trigger in it (old beat welder hands) love the gun.
@@johnkizziah108 keep shooting, it will wear together, I'd that makes sense. Thise moving parts that are mated together will get slicker over time. Thanks for watching
Good looking gun.
Thanks for watching John.
Lov it ❤
Thanks for watching
I think i will get one thank you
You will not regret it
Sarge ya kinda make that 1911 look tiny in them big hands lol.
Got to make it work Bro. Thanks for watching
Just needs that trigger pulled SGT , breaker in , that's a gooden Stay Strong 💪🇺🇸🙏
Same to you Wayne
@@SGT1911 Lucked up for some .357 ammo yesterday , get a box for 39.00 and the rest was 70.00 bucks a box with tax at Academy. I get me some stuffed flounder and lobster after that.
@@waynecastleman1363 niice
@@SGT1911 Lol 😂
I messed around with a Garrison up at the shop this week and it is a real 1911 !
Mine shoots good just wish it was parkarized not shiny
Have it refinished. Cerekote it. Make it any color you want
👍🏻
Thanks for watching
Thats the 19 Mack Daddy 11 nice looking Pistol 😎👍🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸 Shoot the crap out of it Hooah 😄👍
Hooah Bro. That is what it is made for, SHOOTING. Thanks for commenting and thanks for watching
Time to get rid of my glock 22!
You bet
Terrible idea.
@robwilson3749 and why not? I did get a Ronin though. The glock is sitting in the safe and hasn't been used since.
@@leonardboufford282 I'm going to go on a hunch and say probably for all the same reasons you decided to keep it in the safe all this time instead of getting rid of it.
You’re definitely not a young guy and seem to present yourself as though your into guns, you even have 1911 in your channel name. But yet you seem confused on what blueing is on a firearm. Not really sure what to think. Either you are like so many other “guntubers” who just got into guns to make money off the industry and have no real knowledge or you are about the only 1911 guy that doesn’t know what blueing is.
Lol
@@SGT1911Why is he breaking your b@!!$.
@@sgtbones1837 because he is a POS mommies boy hiding behind a keyboard. Still on the tit
Damn !!! That music is annoying as fudge.
I would hate to be in you shoes. Nothing to say except negative BS about other people. what a sad life you must have if that is all you got.
COPY CAT BIG DADDY 1911!!!!!
What do you mean?
Shoot the crap out of it. Always the best way
100% agree
SGT1911
Hooah