Thanks man! I bought a new guitar and 4 of the 6 tuning pegs had a loose screw on the bottom gear. This video helped me fix them. I almost threw them out and bought new ones.
I have no idea what you are saying but this video helped me getting the lid on the back of the tuner off, the screw had come loose so the gear was just flopping around in the housing. Thank you!
Thanks a lot man, mine gear was broken i due to which i was noy able to tune. i thought of getting the replaced. but your video came in my search and helped me to fix that ❤
I can't get the gear cover off by knocking the head of the pin, like at 3:12. Anyone, please? ETA: Welp, I wound up going to Sam Ash and they replaced the entire tuner. Much easier! Problem solved.
Your guitar pegs were all good and why did you opened it lol ... Our problems are pegs getting slipped while tighten the strings ... And it should be replaced at any how so dont waste your time in filming such videos ... Just suggest to replace the new pegs that will be more helpfull .... You wasted my 5 mins ...
@@aeroblackwoods6747 just simply go to the guitar shop or order the tuning keys and then put them on your guitar 🎸 ... It's simple ... Don't waste your time on such stupid videos
Agreed. Using a stripped Philips head on the screws and rusty lineman pliers for the lock nut is pretty ghetto. Not to mention his sudden discovery of the extra plastic washer, and not knowing where it went (If you look, the high E tuner is missing the plastic washer just under the knob). Then he puts it in the wrong place and declares it fixed! 😆😆😆 EDIT: I just looked at his channel, and he posted another video where he decides to replace all the tuners, since he failed the 1st time. He got 6 left-hand tuners, and instead of returning 3 to exchange for right-hand tuners, he put the left-hand ones on anyway, boring 3 new screw holes!! He then winds the ENTIRE strings onto the pegs without even trimming them, the low E wrapping all the way to the bottom of the peg, ensuring it's early demise too!! Wow! Brilliance in action!!
Thanks man! I bought a new guitar and 4 of the 6 tuning pegs had a loose screw on the bottom gear. This video helped me fix them. I almost threw them out and bought new ones.
Thanks a lot man ! You helped me by not throwing my pegs !!
God bless 🙏
I have no idea what you are saying but this video helped me getting the lid on the back of the tuner off, the screw had come loose so the gear was just flopping around in the housing. Thank you!
I have on idea of how do you get lid off according to the video? use hammer to punch the front end? that is not working from my point of view.
Thanks a lot man, mine gear was broken i due to which i was noy able to tune. i thought of getting the replaced. but your video came in my search and helped me to fix that ❤
Thanks you very much sir ... This video helped me to repair my tuning peg by myself.....😁😃
Thanks very much sir very useful guitar lesson video
God bless you sir
Thank you my friend God bless you
Good video ❤❤
Thanks man...my tuning peg also has the same problem...I will repair it myself...I wanted to order a new one... thanks again man 🙏
What was the problem, he just disassembled and assembled it again
@@Ayush-nn3em mine was loose...it wasn't tightening the string
Did he turn the gearwheel around? Or was it just a case of tightening everything up.
P.s autotranslate not recommended 😬
You should tighten up the screw on the gear before putting the cap back on.
Awesome 👍 thanks Lodi
Wow very helpful po boss thank you
I was worried for the first 48 there 😂😂
Thanks for helping...
I didn't understand what u said but it helped me. So thank you
Thank you 😊
My guess is he reversed the gear cog
I can't open the back 🙂
Can u help me how to open it ? It's too tight for me
😢😢😢same problem it's so tight 😭😔
THANK YOU SIR
Ang ingat Ng background
Open all parts and rejoin will fix or anything else can fixe it?i didnt understand plz explain..
Thanks bro 😊
Pansin ko sir sakit talaga ng mga smiger acoustic stock pegs mga ganiyang problema, may 3 akong smiger pare pereho mga issue 😂😂
Naku ganon ba,, mas mabute palitan na nga ng 1 set ,, thank you Kapatid ♥️
hindi mo naibalik ng tama yung isang plastic washer sa loob ng shaft roller... hahah
😁🤣🤣
sken boss ung sa third string pag paluwag lumukuwag nman pero pag mag tighten ako pati mismong tuning pegs humihigpit din
pano kkya ?
Not opening pegs
New lang po . Hirap ko pong tanggalin ung takip na madali nyu lang tanggal ...
Baka naman solid Yan peg mo Brader? heat gun pakunte kunte lang ang buga pwede rin daw
Can we get that back plate back on?
Yes but you need to put some glue on it. Thank you for your comment. God bless
Yes with using clear glue
I can't get the gear cover off by knocking the head of the pin, like at 3:12. Anyone, please?
ETA: Welp, I wound up going to Sam Ash and they replaced the entire tuner. Much easier! Problem solved.
I just watched a video with a similar looking tuner, they used heat (a hair dryer) and a big magnet to pull off the lid.
@@TimPequignot Thanks! Got the hair dryer; will have to find a magnet.
sorry po sir pero mali yung repair na ginawa mo ....yung washer ng shaft inilagay mo sa gear...
Guy's told me what is the rate of one keys of it in nepal
Pano naman po sa classic lang ng guitar tuning peds hindi po naiikot
Sobrang higpit nag screw sa gear na or bingot ng mga ngipin ng mechanism nya .
Anong pinalitan mo diyan boss
Tsenek ko lnag bakit n release paluwag kapag nag tutuning ko.. hindi sya loss thread kundi biyak pala ang pinaka gear ⚙️ nya
Ano po pwede ipalit sa ruber 8:43 sir?
Usually palit na talaga pinaka best kesa mag lumaki sira ..
Good luck getting that back, round plate off. No way.
Yeah, how to do that? I have tried to hammer it, but wont come out.
May be your tuning peg is a solid case sir, need to buy new one
Heated the pegs over stove, it came off in 2mins.
Hairdryer on the circle then tap the rod where the string goes and ping. Just done it
ayaw maanggal ng biloggg
I cant remove that seal
You can do it using glue
Just stick any wooden part to that plate and pull
The miracles happen 😁
@@nitishkaushik3464 Which glue?😢
@@4dioptre fevistick or something like that
@@nitishkaushik3464 👍
Your guitar pegs were all good and why did you opened it lol ... Our problems are pegs getting slipped while tighten the strings ... And it should be replaced at any how so dont waste your time in filming such videos ... Just suggest to replace the new pegs that will be more helpfull .... You wasted my 5 mins ...
is your tuning pegs now fixed? if so, how did you fix it?
@@aeroblackwoods6747 just simply go to the guitar shop or order the tuning keys and then put them on your guitar 🎸 ... It's simple ... Don't waste your time on such stupid videos
Sana sinubukan mo muna kung naging ok ung ginawa mo.kaso putol vid mo eh
Dame mo reklamo. Mag gawa ka Ng sarili mong video
You should buy some tools that won't strip nuts and screws lol ...***cringe
Sure, smart ass
Pake mo
@@DeinDabu english please
Agreed. Using a stripped Philips head on the screws and rusty lineman pliers for the lock nut is pretty ghetto. Not to mention his sudden discovery of the extra plastic washer, and not knowing where it went (If you look, the high E tuner is missing the plastic washer just under the knob). Then he puts it in the wrong place and declares it fixed! 😆😆😆
EDIT: I just looked at his channel, and he posted another video where he decides to replace all the tuners, since he failed the 1st time. He got 6 left-hand tuners, and instead of returning 3 to exchange for right-hand tuners, he put the left-hand ones on anyway, boring 3 new screw holes!! He then winds the ENTIRE strings onto the pegs without even trimming them, the low E wrapping all the way to the bottom of the peg, ensuring it's early demise too!! Wow! Brilliance in action!!