Absolutely especially this being a ranger trim with the bedside camper special tool box in the bedside and it is not rusted out!!! And they were long bed trucks for work trucks for a reason, not much the short beds of the era could safely haul compared to the long bed trucks... and honestly i think the profile of the long bed truck generally just looks better in my opinion..I'm speaking as a owner of a 2000 dodge ram laramie slt quad cab long bed magnum V8 1500 4x4 a big truck for a 1500 155 inch wheel base that's a big foot print for a 2000 half ton truck lol
I use SOS (steel wool with built in soap) pads with Ajax or comet. I never stay in one spot too long. This is good for removing mildew on paint or even faded. Also great method for cleaning aluminum trim like you have on this truck. It’ll shine like new I agree not cutting up truck into short bed. That bed is too nice to cut up
don't slam it down don't kill that Ranger-tough truck, it'll last forever - that rig is a lifetime parts hauler. A little Ford Wimbledon White touch-up blend here and there and you're in Bidness
Other than cleaning it up. Just leave it as it and use it as a daily shop truck/parts getter. Very unassuming and I love it. And obviously fix anything mechanical / fuel system related
I'm glad you're doing this channel. I'm enjoying you, Freiburger, Dirthead Dave, and of course VGG so much. It's nice that you guys can do your own thing without all the producers, etc. that comes with traditional TV shows. Keep up the great work. Of course I still watch MotorTrend TV, but these channels are just refreshingly different.
Hey man. When I get a new lived outside project I always give it a bleach bath first. Bleach kills anything organic on the surface. Jut bleach with a shot of landury soap in a pump up spiayer before the pressure wash. Just wait 15 minutes after coating everything and wash. You will be amazed how much of that rough stuff on the paint washes off. I live in a wetter area but killing what lives on the paint makes cleanup faster. Love that new truck. That one has me hunting up a long bed.
Love the glow-up. I bought a 1988 crew-cab squarebody dually and used S.O.S pads (pre-soaped 0000 wool) and a hose and it got rid of all the spot rust and impurities. Sealed the truck with Zep High Gloss floor polish and it stands proud. Would be AWESOME to see this camper dropped a bit on good rolling stock!
Pure CLR, I would assume is what they were talking about. We used it, commonly, on stucco that had rust stains and what not. It's very caustic / high vapor so if you ever do try it, do it outside.
I have done this in the past... worked out okay. Hit the rust areas with brake clean and a hard scrub brush... then rinse. Now, purple stuff with a scotch brite pad on a DA with low air pressure... to run slower than normal. That did a great job. Then satin clear. Bobs your Uncle, job done. Good day mate "" 😊
Personally I'm more of a fan of building the FE and putting EFI on it and a good trans behind it to get 20mpg with the great big block sound.. Coyote exhaust is harsh as hell, nothing beats big block Ford rumble.
We are sitting down watching you guys. I keep saying how pretty the kit is. 😂 At the end of the video, my husband stopped on the picture of everything. I then had the pleasure of being able to ask a bunch of questions on how things go together. Thank you, Lucky for letting us be able to talk cats and trucks, and me being able to understand more. 👏
I've had good success with vinegar for removing rust. I've wet a shop towel and let it soak on an area for an hour and it dissolves the rust and protects the metal. It should work well with scotch brite. As a bonus it also lifts the peeling paint on 90s Chevys.
Can't wait to see this project start, I did a Heidt's super ride conversion on my 69 F100. Lot more to it than a simple bolt in. A lot of cutting to remove the factory twin I beam. Good luck!😁👍👍
Love the truck, I had a 1967 f250 years ago. With a 390, and a c6 trans. I have a 428 (434) engine, rebuilt sitting on a stand. I would love to find something to put it in someday. SOS pads do work well
I’m literally watching your video right now and just saw the wagon parked in old torrance by la capilla Mexican restaurant, Enjoy your lunch. I say put some nice wheels on the truck and leave it as is!
Regarding what to do is easy.. put the widest AT,s on the back you can fit and junkyard a 460, install whipple and let it hunt. New suspension would be advisable at that junction.
In my opinion, the FIRST thing I'd do is relocate that fuel tank from the cab to under the bed! Then take care of mechanicals & make it safe. Wheels, tires, & brakes & that should do it for a dependable daily driver! It looks solid & sounds great! 👍 Best wishes!🙏
This! And it's easy because this truck already has the extra under bed tank like my late uncle's camper special that I am restoring. You can see the gas cap for it behind the driver's door in the last video.
@Luckysgarageshow, I have been party to an install on a Dentside and will be going that route with my own. It takes longer to grind, hammer, cut, swear at, cry at, and forcibly remove the Ford factory rivets that attach everything to the frame rails on the Bumpside and Dentside trucks. When you finally get to bolting on the QA1 parts, it goes really quick and is great quality ride and handling. Helping on the one I did, sold me on doing The QA1 suspension over an old CVPI front end. Ear protection, a good air hammer with the punch bit, and a new grinder disc are strongly recommended as well as cool drinks. Seriously the frame is like a tuning fork when you start hammering on it, and that ringing sound stays with you for hours or days after.
@@possumwerx it works great to clip the head off the rivet, but you’re still hammering it out of the holes after they have been there for 50 years with the air hammer.
Measure out the head of your plasma cutter and determine the circle size for a ring you can manufacture. The circle size should be just under the diameter of the shaft of the rivet or if you prefer, the ID of the hole of which the shaft sits inside. Center the ring over your rivet and then use your plasma cutter to cut through the head and the shaft of the rivet at the same time. No more rivet head and no more shaft. I use neodymium magnets to attach my guide ring to the frame so there is no movement or slippage when you run the head of your plasma cutter around in a little circle when cutting. Yes, some guys will zip off the heads and then blast the shafts by eyeballing it but that's a personal preference thing in my opinion. I don't use that method myself because it's too easy to damage the holes which doesn't mean anything if you weld them up but it does if you intend to use them as a guide for other parts.
@ with the QA1 suspension you end up using most of the left over holes, so you can’t really weld them up. I like your method, I’ll have to try that. That would make things quicker if not easier.
Wow man, that kit is insane!! Props to QA1 wanting to help out in the first place. This truck is going to be pretty sweet! Can’t wait to see more!! I hope I don’t find myself searching marketplace for a F100….
The two-tone paint on this truck is unusual and cool. I've never seen one like it with that Prairie Yellow roof over white and I like it. Original owner must have special-ordered this truck. Definitely build the FE! Swap to the 428 crank = 410, set of heads, bump the compression up and a decent cam, it'll haul.
I like how you said you weren't going to Hot Rod it just a long brother as you remember all roads are paved with good intentions and nothing lays down the set of 11s like a road made out of good intentions
Go to your big box store in the paint section, and look for powdered CLR in a box. Mix with water as needed. Apply with sponge, use Scotchbrite pad as necessary. Works MUCH better
With all that unboxing and metal parts stacked inches from that awesome Red Mustang I thought I was going to pass out. Waiting for the table to collapse and demolish the drivers side.
Cant wait to watch this one! Also cant wait to see how it fits on a F250. Only advertised for a F100. I have been toying putting this on my 65 F250 but couldn’t get any clear guidance that it would fit. Keep em coming Lucky
CLR, regular not foaming, works good for rust in plastic overflow tanks. Use gloves or don’t touch. Supposedly good on toilets and tubs but IDK about paint. No more smoke?? Awesome! What gives? For glass I love AMAZ on Amazon. Took some elbow grease but made my scaled white glass on 48 dodge look like new.
Muiatic acid is what the car detailers around here to get rid of the rust from bad brakes. You can also save the stainless steel by fine sanding and some buffing. You can also straighten out stainless trim hammer and Dollie’s files. 👍
Hey from Dublin Ireland , so glad i finally got to your channel , subscribed right away , big fan of yours from watching you and Tony jerking around in day past . i drive a 2011 Ford ranger . 2.5 diesel , dont a lot to keep it passing inspection . your truck sounds great and its very relaxing to watch you work . American culture at its finest in my book . Tks Lucky . be safe
I like the F250, I have a 70 F100 custom sport with lots of aluminum trim that I straightened and polished, but it's much easier to replace it if you can find it. Nice truck good idea to keep it stock 👍
I think it was the rain running off the camper on to the truck, yeah clr removes rust and calcium deposits fairly decent.. love the two tone yellow and Wimbledon white truck
Lucky, get some aluminum brightener. I've used it for years on these types of clean ups. It is a acid cleaner. Steel wool and the acid on the trim. Paint and chrome works amazing to. Keep off the glass for extended length or it will etch.
That is one nice old truck, Lucky! I'm glad you aren't going to hot rod it. Leave her just as she is and make her a reliable driver. I think she has "Shop Truck" written all over her, she'd look good with some old-school block lettering on her doors "Lucky's Garage Service with Sarcasm" LOL Or something like that.
I used CLR in the concentrate bottle. I sprayed, then used grey Scotchbrite pads. Made a big difference. But, just spraying on and wiping off didn't do much.
Love the truck! I had an 83 gmc that had similar paint and at local truck club meeting a few demos where done and my truck was chosen. The product was Ardent Marine boat polish. We did the 600 and 1000 put in a buffer and magic happens. If you can find it it's worth a try. I'd send a video I I knew how.
I hope clean up the original wheels and hubcaps and put them back on there maybe a new radiator and hoses or get that one cleaned the radiator on me you got a nice truck. I will never get rid of that truck with you. Love it. ❤
Hey, Lucky Muretic acid will work without taking off the paint, but at full strength it will take the rust down to bare metal you can find it in Home Depot near the brick
Glad you're keeping the shortbed. CLR and scotchbright works most of the time, but ajax or comet works too. I think key is scotchbright pad, a shop rag wont cut it. The guy hasnt asked for his rims back yet?
That F250 "Camper Special" is worthy of a total restoration. It's a unique build in of itself and I'd rather you cleaned it up and sold it to someone who will keep its heritage.
Hello new sub , Ford guy here , I realize all the guys want to keep it original, but you got an all original rotted suspension that needs changing Use the parts if you can on the new truck or the F250 because all the bushings and everything are shot from sitting, you know the deal people that want to leave it don’t realize that it’s just gonna turn into a squeak monster 73,s 9231 So Ct , Caio
Glad your not going to shorten the bed. One of the coolest things about the ranger is that tool box.
Finally a build where the "longbed" gets to be just that! :D
👊🏻🏁
Absolutely especially this being a ranger trim with the bedside camper special tool box in the bedside and it is not rusted out!!! And they were long bed trucks for work trucks for a reason, not much the short beds of the era could safely haul compared to the long bed trucks... and honestly i think the profile of the long bed truck generally just looks better in my opinion..I'm speaking as a owner of a 2000 dodge ram laramie slt quad cab long bed magnum V8 1500 4x4 a big truck for a 1500 155 inch wheel base that's a big foot print for a 2000 half ton truck lol
I"I want to keep it long bed." THANK YOU!!
I use SOS (steel wool with built in soap) pads with Ajax or comet. I never stay in one spot too long. This is good for removing mildew on paint or even faded. Also great method for cleaning aluminum trim like you have on this truck. It’ll shine like new
I agree not cutting up truck into short bed. That bed is too nice to cut up
Used them on chrome and stainless
don't slam it down don't kill that Ranger-tough truck, it'll last forever - that rig is a lifetime parts hauler. A little Ford Wimbledon White touch-up blend here and there and you're in Bidness
I enjoy your channel
It’s got a chill vibe
No screaming music and yes I’m in my late sixties 😎
I agree. Can’t stand the obligatory obnoxious mindless over the top music most of these channels have.
Other than cleaning it up. Just leave it as it and use it as a daily shop truck/parts getter. Very unassuming and I love it. And obviously fix anything mechanical / fuel system related
This. Make it reliable, put some nice wheels on it, maybe an throttle body EFI swap to help power/economy, perhaps clearcoat it, and just use it.
He has a couple of shop trucks lol
Love the Ford long wheel base! Thank you for sharing!
I'm glad you're doing this channel. I'm enjoying you, Freiburger, Dirthead Dave, and of course VGG so much. It's nice that you guys can do your own thing without all the producers, etc. that comes with traditional TV shows. Keep up the great work. Of course I still watch MotorTrend TV, but these channels are just refreshingly different.
Don’t forget Stay Tuned with Tony Angelo!!!
Thanks for watching and the kind words!
Hey man. When I get a new lived outside project I always give it a bleach bath first. Bleach kills anything organic on the surface. Jut bleach with a shot of landury soap in a pump up spiayer before the pressure wash. Just wait 15 minutes after coating everything and wash. You will be amazed how much of that rough stuff on the paint washes off. I live in a wetter area but killing what lives on the paint makes cleanup faster. Love that new truck. That one has me hunting up a long bed.
Love the glow-up. I bought a 1988 crew-cab squarebody dually and used S.O.S pads (pre-soaped 0000 wool) and a hose and it got rid of all the spot rust and impurities. Sealed the truck with Zep High Gloss floor polish and it stands proud.
Would be AWESOME to see this camper dropped a bit on good rolling stock!
Nice job sir Nice Ford truck Nice show sir 😃👏👏👏👏👍👍👍👍
I use 0000 steel wool and chrome polish on the windows, it cleans all the inbeded dirt off
Pure CLR, I would assume is what they were talking about. We used it, commonly, on stucco that had rust stains and what not. It's very caustic / high vapor so if you ever do try it, do it outside.
Yeah, that bathroom clr was never going to work. Pure clr is some nasty stuff.
Great truck.She cleaned up nice.Good work.
Appreciate it!
Brillo pads are great for the rusty spots. 👍🏻
I have done this in the past... worked out okay.
Hit the rust areas with brake clean and a hard scrub brush... then rinse. Now, purple stuff with a scotch brite pad on a DA with low air pressure... to run slower than normal.
That did a great job.
Then satin clear. Bobs your Uncle, job done.
Good day mate "" 😊
Guess I shoulda just kept watching instead of giving my 2 cents... 😂😂😂
Personally I'm more of a fan of building the FE and putting EFI on it and a good trans behind it to get 20mpg with the great big block sound.. Coyote exhaust is harsh as hell, nothing beats big block Ford rumble.
Airbagged slammer camper would be outstanding too. I’m sure whatever you do will be slicker than snot, and fine as frog fur.
We are sitting down watching you guys. I keep saying how pretty the kit is. 😂 At the end of the video, my husband stopped on the picture of everything. I then had the pleasure of being able to ask a bunch of questions on how things go together. Thank you, Lucky for letting us be able to talk cats and trucks, and me being able to understand more. 👏
y'all are putting allot of faith in that lil plastic table rigjt next to the mustang
I've had good success with vinegar for removing rust. I've wet a shop towel and let it soak on an area for an hour and it dissolves the rust and protects the metal. It should work well with scotch brite. As a bonus it also lifts the peeling paint on 90s Chevys.
Put the same, but new camper shell in it and take it with you on tours.
Such a cool truck! Thank you for sharing!
You need the regular CLR in the grey bottle. Soak a green scotch brite pad in it and scrub the paint. It will take off all the rust stains.
Can't wait to see this project start, I did a Heidt's super ride conversion on my 69 F100. Lot more to it than a simple bolt in. A lot of cutting to remove the factory twin I beam. Good luck!😁👍👍
This video, and its predecessor, are the first of yours I've seen. Very impressed. I love a longbed pickup, and wouldnt consider cutting that one.
Glad you enjoyed the videos!
i have a 73 f250 my papaw bought new,great shop truck,lasts forever
Dude! The number of new projects in your shop in mind-blowing. Sooooo damn koool.
Lucky, get you some stuff called Ospho and brush it on the rust that stuff works miracles it is a rust encapsulator
Tree pitch dots, all over the paint. Mornin. Thanks for the vid
Household powder cleanser and some scrub power, changes the paint look. What a good-looking difference. 💯%
I agree! 💯
The Freiburger comet wash!
Mr. Finnegan has a perfect truck for your camper shells. He has that Chevy Dooley crew cab awesome pick up
Love the truck, I had a 1967 f250 years ago. With a 390, and a c6 trans. I have a 428 (434) engine, rebuilt sitting on a stand. I would love to find something to put it in someday. SOS pads do work well
I’m literally watching your video right now and just saw the wagon parked in old torrance by la capilla Mexican restaurant, Enjoy your lunch.
I say put some nice wheels on the truck and leave it as is!
Regarding what to do is easy.. put the widest AT,s on the back you can fit and junkyard a 460, install whipple and let it hunt. New suspension would be advisable at that junction.
In my opinion, the FIRST thing I'd do is relocate that fuel tank from the cab to under the bed! Then take care of mechanicals & make it safe. Wheels, tires, & brakes & that should do it for a dependable daily driver! It looks solid & sounds great! 👍 Best wishes!🙏
This! And it's easy because this truck already has the extra under bed tank like my late uncle's camper special that I am restoring. You can see the gas cap for it behind the driver's door in the last video.
@@JrSamples-g4v Sweet!
@Luckysgarageshow, I have been party to an install on a Dentside and will be going that route with my own. It takes longer to grind, hammer, cut, swear at, cry at, and forcibly remove the Ford factory rivets that attach everything to the frame rails on the Bumpside and Dentside trucks. When you finally get to bolting on the QA1 parts, it goes really quick and is great quality ride and handling. Helping on the one I did, sold me on doing The QA1 suspension over an old CVPI front end. Ear protection, a good air hammer with the punch bit, and a new grinder disc are strongly recommended as well as cool drinks. Seriously the frame is like a tuning fork when you start hammering on it, and that ringing sound stays with you for hours or days after.
Plasma cutters... are your friend!
@@possumwerx it works great to clip the head off the rivet, but you’re still hammering it out of the holes after they have been there for 50 years with the air hammer.
Measure out the head of your plasma cutter and determine the circle size for a ring you can manufacture. The circle size should be just under the diameter of the shaft of the rivet or if you prefer, the ID of the hole of which the shaft sits inside. Center the ring over your rivet and then use your plasma cutter to cut through the head and the shaft of the rivet at the same time. No more rivet head and no more shaft. I use neodymium magnets to attach my guide ring to the frame so there is no movement or slippage when you run the head of your plasma cutter around in a little circle when cutting. Yes, some guys will zip off the heads and then blast the shafts by eyeballing it but that's a personal preference thing in my opinion. I don't use that method myself because it's too easy to damage the holes which doesn't mean anything if you weld them up but it does if you intend to use them as a guide for other parts.
@ with the QA1 suspension you end up using most of the left over holes, so you can’t really weld them up. I like your method, I’ll have to try that. That would make things quicker if not easier.
From where I am, 3000 miles away looks great. Ron
Wow man, that kit is insane!! Props to QA1 wanting to help out in the first place. This truck is going to be pretty sweet! Can’t wait to see more!! I hope I don’t find myself searching marketplace for a F100….
The two-tone paint on this truck is unusual and cool. I've never seen one like it with that Prairie Yellow roof over white and I like it. Original owner must have special-ordered this truck. Definitely build the FE! Swap to the 428 crank = 410, set of heads, bump the compression up and a decent cam, it'll haul.
I like how you said you weren't going to Hot Rod it just a long brother as you remember all roads are paved with good intentions and nothing lays down the set of 11s like a road made out of good intentions
Disc brakes upgrade wheels and tires gas tank and 4 barrel intake with Holley sniper unit vicegrip garage wipe on clear coat. Then drive it.
Go to your big box store in the paint section, and look for powdered CLR in a box. Mix with water as needed. Apply with sponge, use Scotchbrite pad as necessary. Works MUCH better
Thats goona be alot of work but soooooo worth it in the end appreciate the videos Lucky!!!
That Ajax treatment is making short work of thst rust. I say keep as your #2 shop truck, if you got the space.
That is a lot of good parts. Very cool you can use it! Looking forward to more video!
For anything white use the blue gel (thick) Toilet Bowl Cleaner, slightly caustic " but works well and cheap at $ stores ,😅
With all that unboxing and metal parts stacked inches from that awesome Red Mustang I thought I was going to pass out. Waiting for the table to collapse and demolish the drivers side.
I was thinking the same thing! 😂
Cant wait to watch this one! Also cant wait to see how it fits on a F250. Only advertised for a F100. I have been toying putting this on my 65 F250 but couldn’t get any clear guidance that it would fit. Keep em coming Lucky
WOW..nice score on the F250 and even nicer score on the QA1 suspension parts
CLR, regular not foaming, works good for rust in plastic overflow tanks. Use gloves or don’t touch. Supposedly good on toilets and tubs but IDK about paint.
No more smoke?? Awesome! What gives?
For glass I love AMAZ on Amazon. Took some elbow grease but made my scaled white glass on 48 dodge look like new.
If the bed is shorter than 8ft, it's not a truck, it's an appliance dolly.
That's one awesome stuff. Can't wait
Muiatic acid is what the car detailers around here to get rid of the rust from bad brakes. You can also save the stainless steel by fine sanding and some buffing. You can also straighten out stainless trim hammer and Dollie’s files. 👍
Thanks for the tips!
It helped me out tremendously with my 1974 karmann ghia biuld
I was going to suggest some steel wool or like brillo pads to get the rust off but you nailed it bud! Derek Bieri. Eat your heart out!!
Hey from Dublin Ireland , so glad i finally got to your channel , subscribed right away ,
big fan of yours from watching you and Tony jerking around in day past . i drive a 2011 Ford ranger . 2.5 diesel , dont a lot to keep it passing inspection .
your truck sounds great and its very relaxing to watch you work .
American culture at its finest in my book . Tks Lucky .
be safe
Thank you for watching and subscribing.
Have to see you install that QA-1 greatness..
D*** that's one sweet set of that truck's gonna look good.Good job lucky
Wrong CLR Lucky. You wanted the concentrate in the grey bottle. The stuff you used is just bathroom and kitchen cleaner.
Stance and wheels will make this truck👌
Yea Baby! Early 70s f250. Raise the front to level that thing. Bad ass rig that will run for 50 more years.
Love the side moulds, like a suit of armor 😎
The Mrs will be looking for that CLR!
Turn it into a High Boy with the long bed. You might try wet sanding with some 400 grit sandpaper than compounding it.
Bumpsides are the most beautiful trucks ever. And I have a '70 C10 (Easier to work on, and also very good looking.).
I like the F250, I have a 70 F100 custom sport with lots of aluminum trim that I straightened and polished, but it's much easier to replace it if you can find it. Nice truck good idea to keep it stock 👍
That thing is beautiful! I would probably make it 4 wheel drive, and find another nice vintage camper for it.
I think it was the rain running off the camper on to the truck, yeah clr removes rust and calcium deposits fairly decent.. love the two tone yellow and Wimbledon white truck
I love how all the motor trend guys have their own YT channel.
Very enjoyable video to watch. Thank you! :)
Glad you enjoyed it!
Oh my first reaction when i seen the old ford and camper was Lucky lost the shop and is now living on the streets of California. 😂😂🤣🤣
Lucky, get some aluminum brightener. I've used it for years on these types of clean ups. It is a acid cleaner. Steel wool and the acid on the trim. Paint and chrome works amazing to. Keep off the glass for extended length or it will etch.
Been there done that with the QA-1 it takes time, but I like it.
That is one nice old truck, Lucky! I'm glad you aren't going to hot rod it. Leave her just as she is and make her a reliable driver. I think she has "Shop Truck" written all over her, she'd look good with some old-school block lettering on her doors "Lucky's Garage Service with Sarcasm" LOL Or something like that.
Well said!
hi lucky good ep im glad you got some new parts.
Thanks for watching!
Newer mustangs, camaro, and mopar cars exhaust sounds metalic and doesnt have the deep big block rumble... love the old engine sound
I used CLR in the concentrate bottle. I sprayed, then used grey Scotchbrite pads. Made a big difference. But, just spraying on and wiping off didn't do much.
Use a mild green scotch Brite pad and lightly scrub on the CLR and it should help lucky sir
keep the videos coming good sir.
Will do!
Next time use (CLR) instead of comet . The clr takes the over rust off great. Leaves the color alone. Has worked great for me
Love the truck! I had an 83 gmc that had similar paint and at local truck club meeting a few demos where done and my truck was chosen. The product was Ardent Marine boat polish. We did the 600 and 1000 put in a buffer and magic happens. If you can find it it's worth a try. I'd send a video I I knew how.
Lucky you got you a diamond in the rough brother you got a good idea for that truck so keep on keeping on love the channel keep it up
Thanks again for another great video. I don't know how to share, I've tried.
Glad you liked it!
Freaking me out working that close to the Mustang and putting a couple hundred pounds on that plastic table
Phosphoric Acid - it converts the rust into black ferric phosphate which can be easily removed afterwards with a scrub brush
i am a retired mechanic,i have had good luck with trailer bright i live in new york so we are somewhat green so you may be able to get it
Just my preference I've always used Spray Nine, hard on the lungs but it does the job very well
I’ll have to give that a try.
Miss you and Tony in HRG....On the F-250, in my humble opinion....I am always right tho...take it to Earl Scribe for a $29.95 full custom paint job.
I hope clean up the original wheels and hubcaps and put them back on there maybe a new radiator and hoses or get that one cleaned the radiator on me you got a nice truck. I will never get rid of that truck with you. Love it. ❤
Appreciate the feedback!
50% household amonia x 50% water from spray bottle and the grey scotchbrite works well
Love your stuff lucky, keep it up!
Thanks!
I’ve seen that “film” with vehicles sitting under poplar trees
Hey, Lucky Muretic acid will work without taking off the paint, but at full strength it will take the rust down to bare metal you can find it in Home Depot near the brick
I'll have to look into that!
Nothing to say, just a comment to help your channel grow.
Enjoy your content.
Glad you're keeping the shortbed. CLR and scotchbright works most of the time, but ajax or comet works too. I think key is scotchbright pad, a shop rag wont cut it.
The guy hasnt asked for his rims back yet?
Appreciate the cleaning tips!
Getting your shoulder workout in, but the sweat equity looks good on it
You got that right!
That F250 "Camper Special" is worthy of a total restoration. It's a unique build in of itself and I'd rather you cleaned it up and sold it to someone who will keep its heritage.
Hello new sub , Ford guy here , I realize all the guys want to keep it original, but you got an all original rotted suspension that needs changing
Use the parts if you can on the new truck or the F250 because all the bushings and everything are shot from sitting, you know the deal people that want to leave it don’t realize that it’s just gonna turn into a squeak monster 73,s 9231 So Ct , Caio
Thank you for subscribing
Lucky try Castrol super clean I have used it before to remove stuff like that and it works great. Just don’t leave it on for too long