Я восхищаюсь Вами Olha!!! Вы лучше, чем мужчина чувствуете детали и нюансы. У вас все получается легко и максимальной точностью!!! Мало того, Вы справляетесь с оборудованием не хуже плотника или столяра. Женского Счастья Вам и творческих успехов!!! Пусть Ваша личная жизнь сложится как Самый красивый пазл!
Es muy, muy dificil describir tu trabajo con palabras. Un trabajo que reune conocimiento, paciencia, destreza, precision, belleza. Mil gracias por tus videos
Здравствуйте, Ольга! Интересный и эффективный метод имитации гвоздей. Только вот такой клей желательно наносить на свежем воздухе, так как не совсем полезный)).
so, some considerations on the use of cyanoacrylate glue. Until November 2023 I built artificial lures for spinning fishing (then I had to stop because I can only do my hobbies in the bedroom) and I only use cyanoacrylate glue that we also used to reinforce and waterproof our constructions, then we gave a light pass with 180 or 240 grit sandpaper, just enough to remove the polish and have enough porosity to paint with the airbrush avoiding the use of primer. In my opinion, if you scratch so deeply you lose both the waterproofing and hardening effect, this is my totally personal thought. Good morning and I hope that where you are it is not as hot as where we have had average temperatures above 40 ° C (104 ° F) for 2 months😅
CA here should only be in the holes for nails and the gaps between the planks... Here, where I live, the temperature is not so high, but the humidity is very high, and because of this, I have to stop some carpentry work (like planking) until the beginning of the heating season. I also run a dehumidifier 24 hours a day...
@OlhaBatchvarov I live in Piombino, in Italy, in Tuscany, I have the sea 300 meters from home and the humidity is felt so much that I am fighting against the black mold that forms in the house. the cyanoacrylate glue solves the humidity problem because it tends to dehydrate, seals the pores preventing humidity from penetrating the wood. Those who build fishing lures know that the humidity problem is a huge problem since they are objects that are also under water for many times and are often subjected to tractions of many kg if not several tens of kg. do an experiment with some scraps to waterproof with CA glue in the most humid place, I am sure you will be pleasantly surprised.....I hope I have suggested a right solution...😄😊👍
Glue is very difficult to grind - with a scraper it happens faster! And a flatter surface - easier to control so as not to make notch. But do not repeat, as it is necessary to do several times with different sizes of sandpaper ... But it depends on the situation. I use both methods! Here I did it with sandpaper: th-cam.com/video/p_y1qCzp5y4/w-d-xo.html
Sorry to bother you, but I was asking my self why you use CA on the deck planking. In the past I always use to rub in old fashion floor wax with a cloth. The type that was decades ago on wood flooring before they came out with synthetic varnishes?
In my case, I just imitate metal nails. I completely scraped off the СA glue on the deck so that it was only in the 0,35mm (0,014 inch) nail holes and filled all the cracks between the planks...
Как только увидел суперклей сразу подумал это же сколько шлифовать придется, зная как сложно он шлифуется.😱 Мне бы на такое не хватило терпения. Я бы подумал в сторону затирки черной шпаклевкой, она попроще шкурится.
Это такая зараза, что глаза выедаёт пока заливаешь все клеем. А циклей довольно быстро все соскабливается. У меня другая проблема была - возле океана пипец какая высокая влажность. В прошлом году когда начало рвать обшивку на модели - рвалось и мое сердце. По этому я законсервировала всю обшивку. После циакрина дерево не будет играть...
It looks like you just drill the nail holes and then use CA to darken and bring out the holes without using nails at all, giving the appearance of nails. Is this correct?
I've been into boat models for 20 years now, and never before I saw such an attention to detail. Friendly congratulations from France. Dont you think that classical music would fit better with this series ?
Toothpicks contrast very well on walnut wood, hickory and similar porous woods but this is not an option for noble pear, boxwood, etc. (which have a very dense fiber structure). So I use different techniques for different situations...
Hello Batchvarov. Congratulations on your work. I'm a beginner and my difficulty is about the types of thread and thickness to use. Could you please inform me? Congratulations, Moisés.
good afternoon, I am Spanish and I would like you to tell me if you would be so kind, what product is the one that you throw on the deck of the boat and then scrape with a blade
Все элементарное просто , ведро супер клея и нагелевание палубы готово, а я глупенький в 100ом масштабе делаю деревянные нагеля в 0.31мм с имитацией конопатки ! Ушёл сыпать голову пеплом и за суперклеем😔
@@OlhaBatchvarov Оля привіт. я користуючись нагодою, хотів дізнатися: я Вам відправив на пошту листа, з питанням з моделювання. Хоча не відволікатиму. Нічого цікавого. Успіхів.
Glue - because I wanted to preserve the wood and keep it from changing humidity. In the summer, I watched the boards on my model start to break, and my heart also broke from them. So it was a double shot - nails and protection from humid!
Another excellent tutorial.
Thank you!
Could watch your work forever. Such skill and perseverance ⚓️
Thank you very much!
Я восхищаюсь Вами Olha!!!
Вы лучше, чем мужчина чувствуете детали и нюансы. У вас все получается легко и максимальной точностью!!!
Мало того, Вы справляетесь с оборудованием не хуже плотника или столяра.
Женского Счастья Вам и творческих успехов!!!
Пусть Ваша личная жизнь сложится как Самый красивый пазл!
Большое спасибо!
Да, дедушка очень хотел внука, а получил меня - вот и учил держать инструмент правильно)))
Да, и в этом Вы отличается ваша индивидуальность от других девушек. К тому же, это качество дает Вам больше независимости, как например автомобиль
Your dexterity with the tools and attention to detail is inspiring.
Thank you very much!
What a work of patience and precision, the result is incredible.
Thank you for sharing your inspiring techniques.
Thank You very much!
So talented!
Thank you!
maristella ,c·est la grande classe ...j·adore ...La reine du montage ..
Merci!
Как всегда: разумно, рационально, красиво!
Золотые руки!
Большое спасибо за комплиментьІ!
@@OlhaBatchvarov самое главное- регулярно!
Es muy, muy dificil describir tu trabajo con palabras. Un trabajo que reune conocimiento, paciencia, destreza, precision, belleza. Mil gracias por tus videos
Gracias!
Fantastica come sempre 👍👍👍
Grazie!
Complimenti per il buon lavoro super realistica 👍👍👍👍
Grazie!
Un gran lavoro come sempre👍👏
Grazie!
Magnificent...
Thank you!
good work
Thank You!
Здравствуйте, Ольга! Интересный и эффективный метод имитации гвоздей. Только вот такой клей желательно наносить на свежем воздухе, так как не совсем полезный)).
Спасибо! Да етот клей сквозь маску и очки пробивает - я неделю по частям наносила. А то выдержать за раз - не возможно!
so, some considerations on the use of cyanoacrylate glue. Until November 2023 I built artificial lures for spinning fishing (then I had to stop because I can only do my hobbies in the bedroom) and I only use cyanoacrylate glue that we also used to reinforce and waterproof our constructions, then we gave a light pass with 180 or 240 grit sandpaper, just enough to remove the polish and have enough porosity to paint with the airbrush avoiding the use of primer. In my opinion, if you scratch so deeply you lose both the waterproofing and hardening effect, this is my totally personal thought.
Good morning and I hope that where you are it is not as hot as where we have had average temperatures above 40 ° C (104 ° F) for 2 months😅
CA here should only be in the holes for nails and the gaps between the planks...
Here, where I live, the temperature is not so high, but the humidity is very high, and because of this, I have to stop some carpentry work (like planking) until the beginning of the heating season. I also run a dehumidifier 24 hours a day...
@OlhaBatchvarov I live in Piombino, in Italy, in Tuscany, I have the sea 300 meters from home and the humidity is felt so much that I am fighting against the black mold that forms in the house. the cyanoacrylate glue solves the humidity problem because it tends to dehydrate, seals the pores preventing humidity from penetrating the wood. Those who build fishing lures know that the humidity problem is a huge problem since they are objects that are also under water for many times and are often subjected to tractions of many kg if not several tens of kg. do an experiment with some scraps to waterproof with CA glue in the most humid place, I am sure you will be pleasantly surprised.....I hope I have suggested a right solution...😄😊👍
Красиво!
Спасибо!
beautiful work !! can you explain the preference to scrape the deck rather than sand paper ?
Glue is very difficult to grind - with a scraper it happens faster! And a flatter surface - easier to control so as not to make notch. But do not repeat, as it is necessary to do several times with different sizes of sandpaper ... But it depends on the situation. I use both methods!
Here I did it with sandpaper:
th-cam.com/video/p_y1qCzp5y4/w-d-xo.html
@@OlhaBatchvarov tyvm !!
Sorry to bother you, but I was asking my self why you use CA on the deck planking. In the past I always use to rub in old fashion floor wax with a cloth. The type that was decades ago on wood flooring before they came out with synthetic varnishes?
In my case, I just imitate metal nails. I completely scraped off the СA glue on the deck so that it was only in the 0,35mm (0,014 inch) nail holes and filled all the cracks between the planks...
@@OlhaBatchvarov Thank you for your answer. I Must Say that your approach to modeling has absolutely inspired me.
Как только увидел суперклей сразу подумал это же сколько шлифовать придется, зная как сложно он шлифуется.😱 Мне бы на такое не хватило терпения. Я бы подумал в сторону затирки черной шпаклевкой, она попроще шкурится.
Это такая зараза, что глаза выедаёт пока заливаешь все клеем. А циклей довольно быстро все соскабливается. У меня другая проблема была - возле океана пипец какая высокая влажность. В прошлом году когда начало рвать обшивку на модели - рвалось и мое сердце. По этому я законсервировала всю обшивку. После циакрина дерево не будет играть...
It looks like you just drill the nail holes and then use CA to darken and bring out the holes without using nails at all, giving the appearance of nails. Is this correct?
That's right! It's just CA glue.
I've been into boat models for 20 years now, and never before I saw such an attention to detail.
Friendly congratulations from France.
Dont you think that classical music would fit better with this series ?
Thank you very much!
Yes, I also love classical music and even play it myself. But TH-cam allows creators to use only royalty free soundtracks...
@@OlhaBatchvarov I got you. Thanks anyway for sharing
Golden hands
Thank you!
Beautiful! Why did you use CA for the nails instead of toothpicks, which you’ve used in other builds?
Toothpicks contrast very well on walnut wood, hickory and similar porous woods but this is not an option for noble pear, boxwood, etc. (which have a very dense fiber structure). So I use different techniques for different situations...
@@OlhaBatchvarov ah! Thank you. I’ve yet to work with woods other than basswood - still doing kits. 😁
Hello Batchvarov. Congratulations on your work. I'm a beginner and my difficulty is about the types of thread and thickness to use. Could you please inform me?
Congratulations, Moisés.
Thank you very much!
HI, Is there a better way to emphasize the nails instead of laying down a layer of ca glue then scraping it off? I am a novice builder!
There are many ways! Depending on the scale or whether there should be metal nails or wooden... And also on the type of wood...
👍
👏👏👏👏👏👏👏
good afternoon, I am Spanish and I would like you to tell me if you would be so kind, what product is the one that you throw on the deck of the boat and then scrape with a blade
On deck I used boxwood and swiss pear
@@OlhaBatchvarovI mean the liquid that you pour on the cover and then scrape with the blade, thanks
it looked like cyanoacrylate to me
What did you use for caulk lines?
It was a black Nitro-paint.
I showed this in a previous issue here:
th-cam.com/video/It6XGVAG5CM/w-d-xo.html
Благодарю
Всегда пожалуйста!
Все элементарное просто , ведро супер клея и нагелевание палубы готово, а я глупенький в 100ом масштабе делаю деревянные нагеля в 0.31мм с имитацией конопатки ! Ушёл сыпать голову пеплом и за суперклеем😔
Не надо поспать! Это я гвозди имитирую только так. Пробки я бы по вашему методу делала!
мы на флоте палубу стеклом циклевали
Вау! Ето бЬІло специальное стекло?
@@OlhaBatchvarov нет просто битое кусочками, края довольно острые.
побачив кувалдометр і сотки. вирiшив, ВСЕ. не жарт😅,,
То щоб просто увагу привернути))))
@@OlhaBatchvarov Оля привіт. я користуючись нагодою, хотів дізнатися: я Вам відправив на пошту листа, з питанням з моделювання. Хоча не відволікатиму. Нічого цікавого. Успіхів.
You lost me at the glue. Lots of things we do similarly, except that.
Glue - because I wanted to preserve the wood and keep it from changing humidity. In the summer, I watched the boards on my model start to break, and my heart also broke from them. So it was a double shot - nails and protection from humid!