Audi B9 8W carplay / AA installation activation only original components without third party devices
ฝัง
- เผยแพร่เมื่อ 9 ม.ค. 2021
- This video shows the installation and activation of Audi smartphone interface with original Audi/VW parts and without any third party device, everything done under 150€.
Cable: www.ebay.de/itm/VW-Skoda-SEAT...
Usb port: www.ebay.de/itm/Original-VW-Z...
D-Link usb to ethernet: www.amazon.de/dp/B0000ATAD5/r...
Delphi Units: www.digital-eliteboard.com/th...
Guide for Harman units: www.digital-eliteboard.com/th...
OBDeleven: obdeleven.com/en/
Thanks, i successfuly installed it and have now android auto working, i am happy :)
It works, thank you.
Hi! Did you use the connector with the computer? I didn't want to buy it because I've already the obd11... it is possible to skip that part or so it differently? Thank you in advance
replacing the old green connector with a new one, what was connected via the old green connector?
What do I do with the yellow connector that is already connected to the back of the radio
The new usb port remains in the glovebox?
How do you know if you have the Harman or Delphi unit?
Ty
Ps: if think they use now the mib....
I have done exactly same here. But my car play is not working. I can able to play music by connecting pen drive. As you have shown red and black wire, connected to +5v or 12 V?
Good afternoon, after putting the USB plug do I have to connect to the pc or can I unlock through OBDeleven?
Thanks you saved a lot of my money. Now we dont even need dlink lan card
Thanks for the video! I want to change my 'charge only' usb unit for one that you show in the video at 0:34. Unfortunately they are not available in my area. There are a few others available but they are slightly different, they have a purple/pink adapter port on the back with the green one instead of only the green one. Do you think one of these would also work? The part numbers are 8W0035708, this one has two usb ports as well. The other one has partnumber 8W0035708a, this one is a USB-C version.
Thanks a lot already.
Cheers
Is this compatible with an 8v5 Audi A3 facelift without navigation?
How did he connect the two cables on 1:38? I’m stuck at that step don’t know how and where to connect them
Thanks for the video its very informative, I am planning to try out the same. Could you confirm where to connect the black connector which comes with the harness.
The Yellow one replaces the yellow connector in the MMI unit and the green end connects to the USB.
The green socket replaces the green socket in the MMI unit, where to connect the black end?
I found out: black connector is for the aux-port (only for VW). If you use it in your Audi car you can't connect it (different connector). I removed it because I don't use the aux port anymore.
Thanks for the video, I managed to do it without LAN cable part and the specific cable.
You can get any VAG cable from scrapyard with two lines which are yellow and blue. You connect them to 5V connector in the green socket and you are good to go. The under arm charge only unit wont work anymore.
For the LAN part you can use activator by congo. Which can be found in audi forums.
With odbeleven/vcds:
1. byte 19, turn on bit 6 and 7
2. C0 byte 19, turn USB to usb_ipod
3. Under adaptations/UDS adaptations, vehicle configuration, turn on Google_GAL and Apple values.
If im not lazy, maybe ill update this guide/make a video
Hi, so there is no need for new green socket? Just remove these 2 wires and put new 2 wires? I would like to buy USB port like that and put it under arm rest (disconnect port that is now in car and connect this one) but I am not sure do I need another cable or I can use same cable?
In which block ? 5F?
@@dandara2011 C3 and C4 in the quad lock connector
@@mantvydas3493 good way to ease this retrofit. I'm about to do it myself and if I understand correctly:
Connect the power wires to the green connector of the unit after removing two ones from the charging only port?
The coding seems a bit more complicated, since not used to play with vcds but will see when I reach that part
I don’t get it. So it’s not possible to keep both USBs functional ? Also the one in the armrest with Charge only ?
Hi I know this video is a bit old but I have the obd 11 and would like to install this on my Audi A5 2013
Hallo, das Kabel , welches benötigt wird existiert nicht mehr, der erste Link. Hast du zufällig Daten vom Kabel?
Does Toolbox patch method also work?
Hi thanks for the video. Just wanna know if i skip the computer part, can I still use Carplay after the connector installation? Thank you.
Same question , I was fixed everything like in video but can’t work (
Do you solve the problem?
@@ermins9789 I followed the installation which all good. For the computer part, I found someone online who help me activate the Carplay. And now everything in good function.
And the black connector? what it is for?
If I move all the wires of the new green connector to the original green connector, may I keep the "old" charge only USB working?
Thank you
no, tienes que sustituirlo
Bro on the picture on ebay for the cable there is no new green connector, i don’t understand from where does the new green connector come from?
Looking at the same thing. The listing might have changed. I found some with the green connector, but there does the black end go?
I looked into this a bit more and I think its a regular data cable, with terminals for +- which he gets 5V from the end of green plug. As far as I know activation can be done with SD card and ODBeleven. I am planning to do this sometime next month.
10x a lot. worksssssssssssssssssssssssss
Hi thanks for the video. I want to activate Carplay on Audi a4 b9 '18. Will it works the way you show? How is it different from a dedicated 3rd party CarPlay box?
Hi, it will work the way it is shown, you can activate it also for your Audi B9 2018, I personally prefer to have the original system for Audi because you can sill listen to the music or watch videos while using the same Audi menu and you do not have to switch between a third party system and your Audi menu all the time, additionally the cabling required is much less.
@@tatitomendoza1985 I see thanks for your answer! couple of quick questions - 1/ will it work if i have only 1 USB (charge only) port under the armrest 2/ will it be possible to somehow return back to original setup?
@@denisz2895 I have also 1 usb port(charge only) in my car, nevertheless as I disconnected the previous green connector, that port is not working anymore, I have intalled instead the usb port that I placed in my glovebox. If you want to go back to original you just have to unplug the new green connector and plug back the old one that I left hanging, it is as easy as that.
Do you think that it would be possible to convert one existing USB that is for charge only for carplay? I mean that why should I buy the console with 2 ports if I can rewire the existing one?
I mean according to schematics the usb charge only port has already power so the only thing I need to connect is the cable with fakra connector
@@matejpetras2016 Hi, unfortunately that will not work so easy, Audi has done it so well to make a change in the hardware and the firmware, so the people that would not buy this option will really have a hard job. The charge port only will not work because the usb needs a special circuit that will be recognized by the main unit, that is why the people should buy the two ports, or if want to do it cheaper use the option I used.
@@tatitomendoza1985 thanks for the answer. So cable you used is not just an ordinary cable with wires connected to the connectors? I checked audi wirings today and thought I am starting to understand what I have to do even thought I know it would be more difficult. But maybe it is harder than I think. Maybe I will end up with 3rd party module because having wirels android auto is a dealbraker for me. If I could do it myself with diy cables for very cheap I would accept wired only version but I believe you are more experienced so I trust you :)
Hallo hat einer Link für den richtigen Kabel?
Hello
Can you do the patch for the maps with obdeleven?
No, you need a PC
Danke für dein Video, ich habe mir gerade eben alles bestellt. Eine Frage: Wieso Patcht du dein System? Ich habe vor längerer Zeit aus Spielerei das codiert gehabt. Reicht eine einfache Codierung per OBD11 nicht aus?
Hallo haben sie Instagram ? Ich habe mir das Teil auch bestellt und bin ein bisschen überfragt was die Kabel alle angeht..wenn sie so nett wären mir vielleicht zu helfen.
@@bastian832 Guten Tag, verfahren Sie einfach exakt nach diesem Video. Ist sehr einfach, wirklich!
@@thegreeceboy90Moin, ja das stimmt, aber bei mir haben die Kabel die Farbe rot/orange und pink gehören die 2 in den grünen Stecker und der Draht mit dem Labelschuh ist das die Masse ?
@@thegreeceboy90und sind die Drähte auf 3/4 denn immer an die Position zu bringen oder ist das bei manchen Ausstattungen anders.
@@bastian832 das weis ich nicht. Haben Sie wirklich einen Audi A4 B9? Bei mir war das alles so wie im Video gezeigt.
Do you live in Germany I am from NRW
Hello, is it compatible with my Audi A4 2017 B8? Thank you
Hi, unfortunately not, this is only for the B9 models that are equipped with MIB2
@@tatitomendoza1985 thank you for your answer, I have actually a B9 (8W and not 8K) , my bad... I think that it would work than? I have also a AUX and USB charge only under my armrest.
How can i know which version i have (MIB2 MIB1, ...)? I have to be honest i'm not a genius with this kind of information 🤣
@@Dincebosna then it will work.
How can I know which MIB I have ? I think I have standard one .. this retrofit it can't be done ?
Hi, in my video you can see at 0:11 the picture of a compatible MMI, if you are not having Navigation and only one slot for SD, then it is not compatible.
Servus, danke für das Video, hättest du auch eine Liste der Hardware als Link?
Ahhh Liste gefunden, also brauch ich nur das Kabel und den LAN Adapter. Dann kann ich meinen einzelnen USB Port in der Armlehne als Apple CarPlay Schnittstelle nutzen?
Hallo...die beiden Drähte die in den grünen Stecker müssen haben bei mir eine andere Farbe ..bei mir ist es rot/pink ..der schwarze hat einen Kabelschuh der kommt ja an die masse.
I have a question. Unplug pin 3/4 and plug in black and red. I didn't understand it on the video.
You need to remove the cables with the metallic pins and then insert the new cables red and black with its metallic pins. It is not just removing the cable.
@@tatitomendoza1985 could i just solder the new cable on to the existing cables and share the power for both?
Hey so to understand the brown and grey cable i have ho take out from the connector and put the red and black in ? so i have to leave the 2 old cables with pin by side ? not connected to the connector again ?
Someone had an answer for it?
I understand that replacing the wires on pin 3 and 4 was made, they should have the 12v power and the usb unit has a converter to 5v
Hello. Very nice tutorial, but in my car A4 B9 2017 not working this USB port. i still have comunicat " No connect supported device". Maybe You have some idea?
MIB2Q_ER
2 SD slot
1 Sim Slot
10GB Jukebox
Hi. Did you ever solve this? Could there be a compatibility issue between MHI2Q (Qualcom processor) and this type of USB port? I experience a similar issue. Thank you!
For future reference: 5Q0035726E is compatible with MHI2Q! I successfully installed this usb port on my Audi A4.
@@cimbru1 hello i have connected also this part but stil wont work it didn’t found a compatible phone while i conect with the port. Can you help me please?
@@aminhamid5384 After 1 month of use, I can report the following: Carplay connection via cable is not always working from the first attempt in my car. I have to attempt plugging in the cable in my iPhone few times until Carplay will finally activate.. I am certain this is a iOS problem and not a problem with the USB socket. I purchased a Carlinkit dongle which emulates an iPhone to connect to the MMI wirelessly via Carplay and through this device Carplay initiates without issues everytime I start my car.. First, I suggest you check if everything is ok with your coding (Activation Keys, Ports enabled etc). If that is OK, I suggest you try a different certified cable and maybe a diferent phone to validate. It should work eventually. In case you notice the same irregular behaviour as I described above, then I suggest you purchase one of these dongles which in my case got rid of the iOs issue.
@@cimbru1 what did you do with the two lose (power?) cables? Where did you connect them to?
Where I can download new maps for AUDI A4? Volkswagen website, but wich car/multimedia?
Hi, for Delphi units here: filecrypt.co/Container/1DDA666FAF.html
Harman: www.digital-eliteboard.com/threads/audi-mmi-mib2-mhi2-firmware-3634-3663-update-und-asi-apple-carplay-android-auto.480571/page-91#post-3814170
Bitte