How to change a clutch on a Toyota - Burton Builds S03E02 [4K]

แชร์
ฝัง
  • เผยแพร่เมื่อ 3 ส.ค. 2024
  • ✅ Toyota Corolla, Tazz, etc. ✅
    How to change your clutch
    Burton Builds
    S03E02
    This is my effort at changing the clutch, pressure plate and release bearing on our Toyota.
    If your car is not exactly the same as this one, hopefully you can apply some of the same principles and techniques over to your specific repair.
    Links to the Impact Wrench I used are below:
    🔧 Impact Wrench Tool kit - amzn.to/3hGjgyl
    🔧 Impact Wrench Bare Tool - amzn.to/32JPFzT
    =============================
    Patreon & Pay Pal
    =============================
    If you wish to support the channel monetarily, please use the links below:
    Patreon - / grantburton
    Pay Pal - paypal.me/grantburtonbuilds
    Any support will be much appreciated.
    =============================
    Please help support the channel by purchasing through my Amazon Affiliate links above and below. When you do, I earn a small commission which helps keep the channel going.
    Equipment I mainly use (Really happy with this stuff):
    📷 Camera: Sony A6400 amzn.to/2ErIC5s
    🔭 Lens: Sony 18 - 105mm f/4 G OSS amzn.to/3hWwqri
    🔭 Lens: Sigma 16mm f/1.4 amzn.to/2ZZeS7J
    🔭 Lens: Sigma 30mm f/1.4 amzn.to/2HJcWd7
    🎧 Audio Recorder: Zoom F6 amzn.to/2HeVGwb
    🎙 Mic: RODE NTG5 amzn.to/361R4nx
    🎙 Mic: RODE Video Mic Pro+
    💻 MacBook Pro 16 inch amzn.to/2GlCMTU
    🎧 Headphones: BeyerDynamic DT770 Pro (80 Ohm) amzn.to/33kurc9
    Other Equipment I occasionally use:
    - Camera: GoPro Hero 5
    - Camera: iPhone 11
    - Lens: Sony 10 - 18mm f/4 OSS amzn.to/3cUb6lm
    - Mic: Sennheiser E835 amzn.to/34dkAnQ
    - Mic: RODE Wireless Go (x2) (UNFORTUNATELY Can't trust this as a wireless mic, don't buy it)
    - Mic: RODE Smart Lav+ (x2) amzn.to/30kuXVt
    - Backup Mic: Rode Video Micro amzn.to/3idz2RG
    - Lighting: Burton Built LED studio lighting
    #Clutch #BurtonBuilds #DeWALT
  • วิทยาศาสตร์และเทคโนโลยี

ความคิดเห็น • 46

  • @jxhern22
    @jxhern22 4 ปีที่แล้ว +7

    This is a top notch video, excellent work on both the videography and the mechanical work as well. What year is this car? I have a 2000 corolla and I will eventually have to do this job and you sir have given me the confidence to do it due to the quality of this video. Thanks for putting this together.

    • @GrantBurton
      @GrantBurton  4 ปีที่แล้ว

      Thanks for the good feedback. It is a 2005 model. All the best for when you eventually have to do yours.

    • @jxhern22
      @jxhern22 4 ปีที่แล้ว

      Grant Burton sorry, one question ...I noticed some people support the engine before removal of gearbox...but i don’t see how you did it in your video? Did you also have to remove exhaust piping from exhaust manifold?

    • @GrantBurton
      @GrantBurton  3 ปีที่แล้ว +1

      Hi Jaun, I left all the exhaust piping and manifold in place. I also supported the engine before removing the gearbox... I did this by inserting a 18mm piece of wood between the sub-frame and bottom of the sump. Then removed the final bolts holding the bell housing. (Apologies for the delayed reply)

  • @minuramelaka4669
    @minuramelaka4669 3 ปีที่แล้ว +1

    100% clear video thank you

    • @GrantBurton
      @GrantBurton  3 ปีที่แล้ว

      Hi Minura, thanks very much. I have another improved clutch repair video th-cam.com/video/25Kv6D6sXsc/w-d-xo.html Not sure if you have seen it yet?
      Were you just interested in how the job is done or are you planning on doing a clutch repair job yourself?

  • @abrarhaider9491
    @abrarhaider9491 2 ปีที่แล้ว

    Wish to be a mechanic like him.... and proud to be a 400th like.

    • @GrantBurton
      @GrantBurton  2 ปีที่แล้ว

      Hi Abar, awesome, thank you very much... 400 and counting. Also I'm no special mechanic, just the average guy wrenching away in the workshop. Thanks again.

  • @keyvanjohnson9421
    @keyvanjohnson9421 ปีที่แล้ว +1

    Was very helpful thanks

    • @GrantBurton
      @GrantBurton  ปีที่แล้ว

      Hi Keyvan, it’s a pleasure 👍 super awesome to hear back from people that find the videos helpful 😁

  • @billnaire5220
    @billnaire5220 3 ปีที่แล้ว

    Brilliant video. Great idea with the jack.

    • @GrantBurton
      @GrantBurton  3 ปีที่แล้ว

      Hi Bill, thanks. It sometimes can be a little tricky working by yourself. I had to make another cradle when replacing the clutch on the Hilux and it worked very well. I have a video on that. I definitely wouldn't have been able to easily remove the gearbox without it.

  • @riaanbrown4862
    @riaanbrown4862 4 ปีที่แล้ว

    Great vid, Grant!

    • @GrantBurton
      @GrantBurton  4 ปีที่แล้ว

      Thanks. Hope I didn’t make any mistakes... haha.

  • @GunnarSalyer
    @GunnarSalyer 3 ปีที่แล้ว +3

    I searched a how to replace clutch video, and then realized probably 0% of results would be from American creators lol. I'm in the United states now, but lived my whole life in Africa, and keep forgetting that most cars are automatic here.
    Great tutorial! I miss south Africa..... :(

    • @GrantBurton
      @GrantBurton  3 ปีที่แล้ว +1

      Hi Gunnar, thanks for the feedback. I'll be posting a better guide on another vehicle next week Friday... busy editing it at the moment.
      Would you move back to SA? or just miss it but happy in the US... I think I'd like to move to the US.

    • @GunnarSalyer
      @GunnarSalyer 3 ปีที่แล้ว +1

      @@GrantBurton I lived in Mozambique my whole life pretty much, but we visited SA a lot for various reasons.
      I don't think I could move to SA because I can't get a job there, and visas are getting hard to come by, but I definitely want to visit frequently.

    • @GrantBurton
      @GrantBurton  3 ปีที่แล้ว +1

      @@GunnarSalyer I did a little work in Mozambique in 2019... daily flights between Maputo, Vilanculos and Inhambane. Was pretty nice there.

    • @GunnarSalyer
      @GunnarSalyer 3 ปีที่แล้ว

      @@GrantBurton cool, I lived in the far north near Pemba

  • @elmervillatoro4321
    @elmervillatoro4321 3 ปีที่แล้ว

    Great you are good...............

    • @GrantBurton
      @GrantBurton  3 ปีที่แล้ว

      Hi Elmer, thanks very much. Soon to come is a clutch replacement on a Toyota Hilux Pickup.

  • @dawidnester5137
    @dawidnester5137 3 ปีที่แล้ว

    Hi . Very god video. Thanks. Do you have any idea where i can find torque specification for flywheel, clutch, axle etc. for Toyota Avensis T27 . I can even buy , but is very hard to find it. I have everything for Toyota Avensis T25 (previous model) in PDF but not for T27. There are programs like : Autodata or Alldata Repair, but they are for mechanics and companies, they are too expensive.

    • @GrantBurton
      @GrantBurton  3 ปีที่แล้ว +1

      Hi Dawid, unfortunately I don't have the torque specs. for that vehicle but I'll keep my eyes open and if I come across anything, will post here. If you come across them, let us know... possibly post here for others to see.

  • @alfredocorona5046
    @alfredocorona5046 2 ปีที่แล้ว

    great video, but some of the stuff I was hoping to see the most has been skipped over due to the camera battery issue.

    • @GrantBurton
      @GrantBurton  2 ปีที่แล้ว

      Hi Alfredo, apologies for that... it's one of the things i don't like about this camera... its battery sucks, and it catches me out every now and again. But not to worry... it's pretty simple to unbolt and remove the left side and rear engine mount, speedometer cable and the two gear linkage cables... I'm sure if you are attempting a clutch change, you'll manage to remove that stuff without having seen it before.

  • @dk7472
    @dk7472 3 ปีที่แล้ว

    Can you explain what you did to "skim" the flywheel? Thanks for the great video!

    • @GrantBurton
      @GrantBurton  3 ปีที่แล้ว +2

      Hi, I sent the flywheel into one of our local machine shops for skimming. Basically skimming involved cutting a new flat surface into the running face of the flywheel. Back when the vehicle was new, the flywheel had a smooth and flat running surface. Likewise were the clutch plate pads smooth and flat. Over time, as the clutch plate wears, it can also wear shallow grooves into the flywheel surface or cause the flywheel to wear unevenly (even though by eye it may look flay, it may not run 100% true). If we were to install a new clutch plate without skimming the flywheel, there is chance that it may shudder when engaging. Sometimes you can get away with not skimming the flywheel but most (if not all) manufacturers will only warranty the new clutch plate if the flywheel was skimmed before installing the new clutch. Hope I've explained it correctly. Glad you enjoyed the video.

  • @hubertmaeobia5585
    @hubertmaeobia5585 ปีที่แล้ว +1

    What causes noisy in the gearbox when starting up the vehicle

    • @GrantBurton
      @GrantBurton  ปีที่แล้ว

      Hi Hubert... what type of noise is it?

  • @freemaninegbedion8283
    @freemaninegbedion8283 หลายเดือนก่อน

    Gear slips to neutral.. Toyota auris 07 automatic. After off n on the engine,it will engage. What should i do

    • @GrantBurton
      @GrantBurton  หลายเดือนก่อน

      Hi, It might be a good idea to plug the car into a diagnostic computer to check if there are any fault codes that come up that relate to your issue. I don't know much about automatics but have you checked the fluid level of the transmission?

  • @windyelm5450
    @windyelm5450 3 ปีที่แล้ว

    Good video. But I don't think a good idea for DIYers. I replaced my Corolla CV drive axle a couple of times. Very difficult to get it out, mainly because of limited space under the car.

    • @GrantBurton
      @GrantBurton  3 ปีที่แล้ว

      Hi windyelm, thanks for the feedback, glad you enjoyed the video. I also have an updated clutch change DIY guide video for a Toyota Hilux if you interested in that th-cam.com/video/25Kv6D6sXsc/w-d-xo.html.
      Working without a hoist / lift does make the job a little more difficult but with large enough tressles / jack stands, its not that bad. I Purchased larger stands to make the clutch change on our pickup a bit easier.

  • @norbiesison9257
    @norbiesison9257 3 ปีที่แล้ว

    Curious; there's no pilot bearing for the transmission shaft?

    • @GrantBurton
      @GrantBurton  3 ปีที่แล้ว +1

      Hi Norbie, it doesn't seem so. This is the first time the gearbox and clutch has been removed and there is no spigot bearing. My Hilux has a spigot bearing as i'm sure many other bigger vehicles have. I'm guessing the engineers at Toyota didn't deem it necessary to install one on the Tazz.

  • @anton_c8gur
    @anton_c8gur 3 ปีที่แล้ว

    my your alone putting down that gear box

  • @nzwotb2525
    @nzwotb2525 3 ปีที่แล้ว

    What engine is in this corolla?

    • @GrantBurton
      @GrantBurton  3 ปีที่แล้ว

      Hi NZ, its a Toyota Tazz and the engine is a 2E - 1.3 litre 4 cylinder.

    • @Zaqaryy
      @Zaqaryy ปีที่แล้ว

      @@GrantBurtonis this process the same for the starlet 1.3t

    • @GrantBurton
      @GrantBurton  ปีที่แล้ว

      @@Zaqaryy I'm not 100% sure but I guess if the process is not exactly the same, it will be very similar.

  • @moviesnight899
    @moviesnight899 3 ปีที่แล้ว

    Please I have a question is it expensive to fixed the clutch

    • @GrantBurton
      @GrantBurton  3 ปีที่แล้ว

      Hi, thats not an easy question to answer as 'expensive' is a relative term. I suppose it depends on where in the world you are and how readily available the parts are, and also if you are able to complete the job yourself. Generally speaking, I would think It would be a mid-range cost repair... For example, Its more expensive than replacing brakes but it's not as expensive as doing a complete rebuild on a motor.

  • @noumanrana6058
    @noumanrana6058 3 ปีที่แล้ว

    Make video again with details and also charge your camera

    • @GrantBurton
      @GrantBurton  3 ปีที่แล้ว

      As luck would have it... I’m already working on another clutch change video for another vehicle, a Toyota pickup. Hopefully it’s an improvement. Thanks for the feedback.