Ok so I don't have a rk rivet tool but a Motion pro rivet tool . So what I can't use the rivet link supplied with no torque spec. unless I buy your tool ? Tight is tight and a flare is a flare ,but , I want to know it's not going to fall off next week.
On our website is a chart that shows the min/max rivet diameter for RK Chains. If your RK Chain isn't listed there let us know and we'll give you the chain min/max. rkexcelamerica.com/products/chain-tool/
Yep. I just used a DID rivet style link with a press fit plate on an RK chain. Perfect fit. It was a non-Oring style chain. The RK chain tool worked perfect, pressed the outer plate to the exact distance needed, and then riveted to 5.60mm diameter on the link post. No friction or binding, same measurements across outer plates..
Thanks buddy! Just did this for my first time!
what do you use for the recieving side of the tool when using the pressure plate
Отличный инструмент! У меня такой же. Очень облегчил процесс замены цепи =)
Hello, i have the old style rk tool. Do you have any idea about how to use it? Thanks
Which tool part number do you have?
Ok so I don't have a rk rivet tool but a Motion pro rivet tool . So what I can't use the rivet link supplied with no torque spec. unless I buy your tool ? Tight is tight and a flare is a flare ,but , I want to know it's not going to fall off next week.
On our website is a chart that shows the min/max rivet diameter for RK Chains. If your RK Chain isn't listed there let us know and we'll give you the chain min/max. rkexcelamerica.com/products/chain-tool/
Can this RK tool be used with DID chains?
Yes it works with most other chain brands.
Yep. I just used a DID rivet style link with a press fit plate on an RK chain. Perfect fit. It was a non-Oring style chain. The RK chain tool worked perfect, pressed the outer plate to the exact distance needed, and then riveted to 5.60mm diameter on the link post. No friction or binding, same measurements across outer plates..
Great, I will get one ordered 👍
it's same process as adjusting a watch bracrlet
The statement that you Must change all your sprockets anytime you change a chain just isn’t correct.
To validate the warranty on a sealed RK Chain you must replace both at the same time.
only when you do half ass work always change as a set