Hi there. I am assuming u wanted to know how to cure the ink? If u r using Heatpress to cure the ink set the heat temperature to 170 D Celsius or 300 F Celsius. Use Matt heat paper to get Matt finish. I hope this is what u r asking
Hi, there. Just want to ask? Did you use cardboard for the off contact? How much the thickness of the cardboard? And if ya? Is it ok if only use 1 side off contact? And, thank you!
@@anggisaurus3991 very good question. This is the most important part. If not cured properly the print will wash off in few washes. I used flash dryer to cure and finish it with heat press with medium press so that the design doesn’t get smudge
@@anggisaurus3991 yes almost all however it is more important for Plastisol Ink. Water base will air dry itself but it is recommended to run through the dryer or heat press it. For Discharge ink U will need a dryer with blower to activate the ink but it can also be heat press.
Lovely
Awesome print. Keep up the good work!!!
Thank u 🙏
Good video where can I buy that screen press? I need about five and how much?
Nice design
Design maravilhoso parabens pelo trabalho ze carlos ipatinga mg brasil.
Thank you .. Greetings from India
great video!! how do you register your screens??? thanks
Hi thank u. You can watch my other video “Screen Printing DragonBall design on Black T-shirt” on how I do my registration.
I am sorry my English is not good, but I want to know,what watts to better drying,because sometimes Ink its loose the shining
Hi there. I am assuming u wanted to know how to cure the ink? If u r using Heatpress to cure the ink set the heat temperature to 170 D Celsius or 300 F Celsius. Use Matt heat paper to get Matt finish. I hope this is what u r asking
Hi, there. Just want to ask? Did you use cardboard for the off contact? How much the thickness of the cardboard? And if ya? Is it ok if only use 1 side off contact? And, thank you!
Hi there.. try to use a 3mm thickness for off contact, it should be on both the sides.
Will you be doing any photoshop tutorials??
Yes will be doing. Do you have any particular part that u want to know? Let me know if there are any and I will see if I can add that. Thanks 🙏
@@Riyum mainly with halftones
And also simulated spot process seperation
Which brand ink do u use ?
Water based ink very low cost as plastisol ink.
You don't use curing just use hotgun?
Yes we cure the ink with heat press.
@@Riyum I see it's drying too fast. Does it use the most power? Is ink also an influence?
What ink do you use to print the shirt?
Plastisol Ink
plastisol or waterbase?
Plastisol ink
@@Riyum how about finishing process? What do you used? Finishing with cure conveyor or heat press machines?
@@anggisaurus3991 very good question. This is the most important part. If not cured properly the print will wash off in few washes. I used flash dryer to cure and finish it with heat press with medium press so that the design doesn’t get smudge
For all type ink it's same process?
@@anggisaurus3991 yes almost all however it is more important for Plastisol Ink. Water base will air dry itself but it is recommended to run through the dryer or heat press it. For Discharge ink U will need a dryer with blower to activate the ink but it can also be heat press.