Knocking Out Beanies With Knockdown Stitches for Beanie Season! Complete Profit Breakdown
ฝัง
- เผยแพร่เมื่อ 4 ส.ค. 2024
- Tackling beanies for beanie season! Thanks for watching my video. Hopefully, this was either helpful or entertaining to somebody out there!
🔔 Subscribe for more decorating videos like this ➡️ bit.ly/3lPkpbk
🧵 Embroidery Supplies:
Sportsman 12 Inch Beanie - amzn.to/3OZohV0
Embroidery Thread Starter Set - amzn.to/3PJGLsa
Cut Away Stabilizer Backing - amzn.to/3OPYTPR
Magna-Glide “L” Bobbins - amzn.to/3DLzepi
GROZ-BECKERT Titanium Needles - amzn.to/3vxRWw4
Melco Equipment - shopmelco.com/
📷 Camera Equipment I use:
Sony ZV-1 Digital Camera - amzn.to/3ShlnfJ
K&N Tripod - amzn.to/3V0wxG4
Neewer Lighting - amzn.to/3UQqfJK
Rode Wireless Go II - amzn.to/3PQ4aIq
🕛 🕛 VIDEO CHAPTERS 🕛 🕛
00:00 - Intro
00:59 - Setup & Materials
04:17 - Hooping
06:29 - Knockdown Stitch Explanation
08:06 - Placement
10:35 - Final Product
11:13 - Profit Breakdown
FULL DISCLAIMER: I make a small commission on my amazon affiliate links - แนวปฏิบัติและการใช้ชีวิต
![[TH] LEV vs TLN | TE vs VIT - VALORANT Champions 2024 DAY 3](http://i.ytimg.com/vi/_AbmrWv2lO0/mqdefault.jpg)
Watching this as I embroider the same style of beanie.
150 pcs with a 5 minute cycle time, on products that my customer purchased online.
I’m charging him $11/each and explained to him that I could save him some money next year if he allows my to purchase and mark up the hats.
He is a contractor and I explained that it would be like a customer hiring him to put up a building and the customer supplied all of the materials, just using him for his equipment, personnel, and expertise in the industry. He fully understood and asked me to contact him next Fall.
Don’t under sell yourself, there are lots of people selling junk at low margins, your products are much better then some of the stuff I’ve seen. I shoot for at least $50/hr, my Barudan machine and software were nearly $20,000.
Hey! Greatly appreciate the time you spent to type this all out.
You definitely make a great point about the customer supplied material. For me, I am fairly small still so I do give way to please my customer but I certainly will have to make adjustments for growth. At this moment, it is what works for me.
Spot on! 👍🏼
Thanks!
Great video! Great information! Thanks so much for the cost breakdown. Barbara in Colorado
Thanks for watching, Barbara!
Thank you for sharing
Thanks for watching!
You did good
Thank you ❤😊
Thanks for the support! Hope you enjoyed the video :)
Good education bud. Ty.
Thanks for watching!
I really like these longer form videos with costings etc. Also, please can you explain what active feed is and why you would increase/decrease it? Perhaps a demo on when and why you need to alter it.
Thank you for your feedback! I am trying to do a good mix of these in-depth videos as well as my shorter demo videos. Unfortunately these take a bit longer to make.
I may make a full video for acti-feed. But for a quick answer, it is the top thread tension for the Melco embroidery machines. It is motorized so it allows for adjustment during embroidery to account for different material thicknesses (ie on hats with the middle seam). You usually want to set it lower and let the machine auto adjust the tension, but if its set too low (at least for me) it will sometimes shred the thread.
Do you know what size stabilizer you use to perfectly fit the mighty hoop?
Each size is a little bit different but I usually keep 8" x 8" precut stabilizer on hand for the 5.5" x 5.5" hoops because it fits on the hoop station perfectly. For larger hoops, I just buy 15" x 15" stabilizer which is good for my largest (10" x 13" hoop) but can also be cut down or folded easily for smaller hoops.
I love Melco embroidery machines. Own the Bravo myself and embroider lots of stuff. But what I no longer do are these commissioned works where large quantities are to be embroidered. You always have to sell yourself below price. In Germany, people are even more stingy and simply don't understand how complicated embroidery is. I wish you all the best for your business. You do that very well.
Yes unfortunately the larger orders are better handled by true commercial embroidery machines that run 6+ heads at a time. For now, I am happy with the pricing/quantities that I can fulfill. If the orders are too large or the amount is too much for my customer, I'm usually honest to let them know that a larger shop would be a better option.
I have a ricoma mt1501 but I was wondering how much cost those melco???
Depends. I believe their Bravo X is around $10k and their EMT16x is closer to $16k but they do have discounts and financing available. You would have to reach out to them directly for the exact prices.
you have to use a ruler for measuring the gap of the beanie and Erasable Fabric Marking Pen for the centre , otherwise you have to do it again and again
I agree, if you are learning the placement. I still do that when I am uncertain or have an unusual design. However, I am at a point where I know how my laser aligns on beanies and can eyeball it near exactly. This saves a bit of time
@@LovesBranding if you align the first then the others are going to be at the same spot , my PR Brother machines at least they do
@@lepat63 Whatever works best for you 👍
labor???? 20.00 and hr = $80
Yep! Time is not free! 😭
So basically charging $1 per 1000 stitches.
That's a good starting point but depending on your overhead, it might be more
I think the profit is way to low for this project. Our business is underpayed. You charged the labor cost for the embroidery file to the customer? For this design it takes near to an hour, digitizing, run a test stich, adjust the file…
Hi! Thanks for the feedback! For everybody, the costing is going to be a bit different. Since I work out of my basement and have very little overhead, I am able to accept these projects at a better rate. I didn't include the digitizing/labor cost of the file because it is one I already had for this customer for previous projects. I charge anywhere from $15-50 for the process depending on the complexity and size of the design 👍
@@LovesBranding I charge 50$, for large, verry complex designs also above 100$.
Do you digitize your files?
@@PrintStitchLLC Yes, 99% we digitize self. Only verry large and complex designs we outsource.