How To Disassemble Lenovo Ideacentre A340-24IWL AIO Computer And Upgrade NV1 SSD?
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- In this video, we're going to show you how to disassemble and upgrade the NV1 SSD on the Lenovo Ideacentre A340-24IWL AIO computer.
This computer is a great option for students and small business owners who need a powerful computer that's easy to keep in perfect condition. We'll show you how to disassemble the computer and upgrade the NV1 SSD, so you can keep your computer running at its best!
In case you have another question regard Lenovo AIO computer, feel free to ask in the comments.
For more contact us at bilalk.com/bilal/
#lenovo #ideacenter
Other than FULLY turning the bottom screw, which does nothing but either hug or push the cover away from the body, here are some instructions I hope you find helpful.
Location of attachment points:
BOTTOM:
Measuring 1 centimeter from the bottom corner along the bottom edge on each side, you will find one plastic hook attached to the back case clipping onto the internal plastic frame. A very thin flat blade screwdriver should release it. Otherwise no other hooks or snags along the bottom.
SIDES:
This is where the real fun begins.
Strangely the back cover has inset attachment points, instead of between the case edge and the screen.
4 U-hook anchor points located at:
1). Horizontally: 1.8cm in from the outside edge, Vertically: 7.8cm up from the bottom outside edge
2). Horizontally: 1.8cm in from the outside edge, Vertically: 14.4cm up from the bottom outside edge
3). Horizontally: 1.8cm in from the outside edge, Vertically: 19.5cm up from the bottom outside edge
4). Horizontally: 1.8cm in from the outside edge, Vertically: 28.8cm up from the bottom outside edge
These are the MOST difficult to disengage. Simply running a guitar pick or screwdriver or slidey bar between the edge and screen doesn’t work. In the past, I’ve been too gentle on the edges and like a surgeon separated the screen glass from the screen digitizer ruining the entire PC. My suggestion is to stick a screwdriver or a block of something inside the stand hole, between the cover and the body to keep up the pressure on the back case as you go along. Since there is nothing to release along the visual edges, you have to pull the bottom, slide along the side, relax, pull, slide, relax, technique along the bottom and edges until something eventually gives. Hopefully, it won’t be your patience. Fingernails are sometimes the best weapon.
TOP:
There are 8 cover plastic nibs spaced evenly along the top edge, 4 to the left and right of the camera slide switch. You might try inserting a very thin guitar pick along that edge. I didn’t because I was too afraid of killing another PC again. Getting the plastic cover away may be tricky. There are no delicate cables to worry about. You might get a string of rubber coming out from between the side edges but you can lightly glue them back, I used a slight brush of Elmers rubber glue.
This is the worst case I’ve ever seen for repairs. The attachment points are way too hard and certainly not made to easily open. I would never suggest this PC because the next repair guy might have to buy you a new one out of his own pocket.
Good luck friend, you're going to need it. 😄😉
Helped me out, thought I was going mad, honestly the hardest AIO I've had to pull apart, the plastic panel was insanely stuck
Thanks for uploading this is exactly what I needed. 2 questions:
1. The empty RAM slot is for additional RAM correct? The 4gb it came with is it soldered on?
2. If I don't have spare screws for the m.2 can just use some tape to hold it down?
There is only one RAM slot, the RAM module is inserted there (in the video). I think you mean the empty ssd m.2 slot in the top right of the motherboard. I shouldn't use tape to keep that in place as it can become hot and the glue will dry. So it might melt and the glue on the tape can let go. Try to find a small screw somewhere.
Perfecto, me funciono, muchas gracias, saludos...
Can u send s link of the stuff u used?
Thanks for the video! Very helpful
Could you do one about removing the CPU and changing the intel core on the all-in-one to an i5 or i7, or anything it supports?
No mostly laptop cpu cannot be upgradable. If u want buy another all in one computer with higher cpu like i7
That's the cons of the laptops cannot be upgrade the cpu because its built in soldered in the motherboard but u can upgrade the RAM, HDD AND SSD.
Hi Bilal you know the name of the ssd ?
There are many, i.e. kingston, sandisk, wd, samsung etc
Good Help for add new NVME SSD.
Keep it up
Hey do you know if the samsung 970 evo ssd is able to be upgraded into this
What the processor and its generation?
I threw the screen when I uncovered it, I don't know if I was a balance or what happened because it had never happened to me
Can the fan be replaced?
yes offcourse.
@@BilalKhalid can u make a video about it
Good helpfull videos thx.
Thank you Mr. Bilal
Iska display cable milega kya
Yes mil jaye ga from ali express
Que memoria ram usa esa lenovo
DDR 3
I subscribe and like your videos
Thank you for this.
My pleasure!
connector type for this pc?
ssd
Thank you
You're welcome
Mera computer all in one Lenovo ka screen flickering ho rha hai
Hello friend, I hope so, you recently requested copyright of a video of yours that I replicated on my channel, please, I'm sorry for the mistake, I ask you to withdraw the complaint please, because the video has already been removed , it was a mistake for having admired your work and I simply wanted to disclose it, turning me down on my channel, it ends up harming me, I hope you understand me, sorry, thank you very much
ONLY ONE SLOT FOR RAM
Poor guide, cracked my screen