Excellent set up in your shop bro,I love the different tools on the walls,my wife hates that I want 6 different brands of the same kind of tool,,Iim also wanting to know about that little Ryobi blower 😳,,that was cool
My compact C3 craftsmans (Ryobi) only have 1.5ah batteries and have been satisfactory for me during the last 4 years of use. I've remodeled a whole house with them and have always been impressed. 18v power at 12v weight. I've been impressed, and like my Ryobi stuff!
It is based on an (older) Ryobi design so it is just a matter of matching it up to which one, or accepting that the Ryobis got better over time with each new model, like everybody else. However if you're serious about performance and speed, to get a fair amount of work done then you don't use a 1.5Ah battery so I don't see the point of the video. If you only have a small amount of work to do, what did it matter if it took a few seconds difference either way? This just isn't applicable to any real world use and need combination. The real question is why would anyone choose Hart? It has no virtues over any other brand whether it be price or performance. Maybe Walmart will put them on sale so you save 10% but 10% is not enough difference to plan a tool line investment.
@@stinkycheese804 well I just started in construction, I got them be because no one else has them, on th job site everyone has Milwaukee and DeWalt, I got them because they looked different and had no bad ratings, the only thing ppl say is they aren't contractor grade...I don't mind
@@stinkycheese804 I love the hand tools by Hart, and the grinder! I didn't buy any drills or impact, because I only use Milwaukee fuel hammer/impact set!!! Milwaukee makes the best drills and impacts! I'd use a m12 fuel before I'd use any other brand! Hart's hand tools are nice and cool
Meh, professionals were using less powerful drills for decades. It's the non-pro who doesn't understand how to get the job done cost effectively, with what they have. Granted if you're drilling a bunch of 1"+ holes, you want a larger battery or a corded tool.
My Hart drill would drag your Black and Decker outside, stomp it in the dirt, take it's lunch money, fuck it's bitch, and nutt on it's pillow! 🤣 Hart tools are bad ass for their price point! 😎
This is probably the most unbiased review I've seen of Hart tools. From the research I've done, they don't seem that bad. Yeah they're not the greatest tools and there's infinitely better tools out there. But if someone wants to buy their tools at Walmart it's probably going to be good enough and get the job done
Yeah, a lot of these TH-cam reviews don't seem to realize that some people are just homeowners looking for a decent set of tools to do simple repairs around the house. Those people don't need to go out and buy a Milwaukee driver just to hang a few cabinets.
I bought a set of Hart for small projects and because now all my surviving brothers are pretty far away and busy. So I'm trying to teach myself how to do things. The impact driver isn't holding a bit right out of the box. I'm not sure I can hold that against the brand because it could just be a one off thing. But I'm pretty sure I'm installing the bit the right way. I have the trigger in the middle, battery out and I'm pulling the coupler forward, inserting the bit until it's all the way in and then letting the coupler ease back. The bit still just falls out or I'm able to pull it out with barely a tug. But thanks for the video. It was nicely informative.
you are welcome and when you put a bit in the impact you might need to adjust the collit. pull it towards the front of the tool while you push the bit in. it should lock it in place
I drove the same lag bolts... actually longer.... with my Milwaukee M 12 impact end it sunk them completely in less time.... in fact it countersunk them into the wood.... and these are supposed to be 20 V tools?
Milwaukee is in a different in tti tool range this is the bottom bracket along with Ryobi but it got the job done I'm an average guy I'm not going to sit there and be a fanboy of any tool line if the two works I'm happy with it and I respect your video and what you do thank you for sharing keep doing what you're doing
I mean it's a great platform to test and prototype solutions. It's easy money for TTI and they have all these other platforms to test under easier load applications to try new ideas without pissing off professionals with have baked solutions to every day problems.
Do remember the M12 and the Skil Brushless are the two most powerful 12v impacts out there - by a ridiculous margin. And at almost 1,700 in.lbs they're far more than these basic 20v impacts are even rated for. Remember the price difference here as well.
The knot might have caused a little trouble, but good honest review, good video! I'd never own a hart power tool but its interesting to see what they do lol
@@ManCaverTools I think it was because you kept going commenting throughout the unboxing about how you don't like the color white on the tool and I believe people got annoyed by that.
Thanks for the video! I'm trying to look out for a buddy who wants a good DIY tool set. Looking for quality-to-price. I'll definitely be checking out the rest of your vids
my hart impact had a "break in" peruod where it shut itself down several times during use, but after a year or so of owning it, it stopped doing that, and i dont use it for super difficult stuff. i use it every day to remove and replace undercarriage bolts (8mm head), lug nut REMOVAL (19mm 3/8 drive to 24mm 3/8 drive ((with snap in adaptor, not the 3/8 drive impact. i have the exact same one you have, just got a socket adaptor.)), and to also do brake caliper removal and replacement with a torque stick to drive in, and a torque wrench to finish torque it. I love the usefulness of my impact as an efficiency increase for automotive tech work. i would not suggest using them to drive lug nuts in other than maybe to seat the tire before torquing to spec with a proper T-wrench.
Picked up the 20v brushless drill and impact driver with 2 2ah batteries and charger kit for $89 and a 4ah battery and charger for $43 at my local Walmart. Hopefully that was a good deal
I bought the Hart impact because it could supposedly break a lug off cars and it wouldn't do anything on my little Pontiac lugs that were torqued to 80lbs ft. Save your money and buy something better if you want to remove lugs from a car.
@@temping-sama definitely a stronger 1/2 inch impact driver preferably something brushless. You get what you pay for so keep that in mind. Make sure you purchase sockets rated for impact drivers too otherwise you'll have a very bad time.
Thank you for bringing us some Hart tools. I see them, but I'm invested in one+ already. Boost the performance on those Hart tools by hardening the batteries! (Run ALL the way dead under load, and charge them fully 3 times).
Looking forward to the comparison videos. I may have missed it, what Milwaukee do you have? The Hart brushless drill kit (w/ 2.0Ah battery and charger) goes for $94 at my local WM. I picked up the Ridgid Octane Hammer Drill w/ 3.0 Octane battery and charger brand new with full warranty for $80 at my local HD. Granted that was 50% off the list price, but shop around and you can find great deals.
Cool. Like I had mentioned, just because the same company makes them, doesn't mean the specs are the same on the insides. You can see similarities from the same maker, but again there are only so many ways to design certain tools without them Not looking similar. When taken apart & you see if the circuit boards are covered in moisture resistant coatings, wire thickness, plastics used, metals, etc... You can see where corners were cut to save $$ & offer them for cheaper compared to say DeWalt where you are paying more for Pro Grade tools. I have seen quite a few Professional Contractors videos who use Ryobi tools everyday & are very happy with them. Great video guy!
Pre-drilling the holes for the lag bolts it would have no problem sinking that lag screw in. Im getting 1 tomorrow. Gonna use it to build my house where ever screws and power lags are needed. We'll see what it can do.
2 tools 2 bats and a charger for $100 it's hard to go wrong. If the drill lived it's life on speed 1 and the driller actually let the flutes clean themselves out instead of laying down on it you wouldn't have any problems there. The impact is what it is but if you're not doing lags or timberlocks you're in business. I'm lucky to justify owning top of the line tools because I'm a professional but as a DIYer I'd still go Ryobi because the line encompasses so many more tools.
Thanks, I've been considering getting g the set with these and the reciprocating saw. Light duty DIY stuff is all i need them for, the price is reasonable, and they seem to do way more that I'll be needing....that 1 1/8 hole was suprising. And I doubt ill ever need to drive 1/2" lag bolts into undrilled tree stumps lol
Is it me or maybe the displays, but the trigger and buttons on all of them felt really cheap and almost throw away pastic... I was really disappointed. Just bc the price they are at.. did you see that?
Hart lost any interest I may have had, the 2nd time that drill driver stopped and you had to pull the battery and put it back on. Thought about getting a set of these just for friends/relatives who show up to barrow a drill etc, but I'll stick to my Dewalt and Milwaukee. Nice video though and keep up the reviews!
It's just a lighter duty tool for lighter duty jobs. Thinking it should be capable of the same jobs as a tool costing twice as much? Of course not, if there were no trade offs then the expensive brands wouldn't exist. The key thing here is that all brands should cut off if you push them too hard. That is not a sign of a tool problem, rather one of a user expectation problem. 2nd key thing is, it saved the tool rather than self destructing. This grade of drill is great for driving screws and other small to small-medium fasteners because it has a clutch. That even makes it superior to an impact driver w/o clutch for these SMALL fasteners. Many people get that backwards and think they should have 200 ft lbs of impact without a clutch on a small screw and try to drive it as fast as possible, wrecking the screw or bit eventually. Do it once and those seconds shaved off the work time disappear.
Gotta let the tool work not push down on it been useing this set for a while now on custom cabinets flooring body work roof work on motorhomes haven't had any issues I've even dropped the drill frome a 8" ladder and its still kicking i like the white color my tool box.and tool cart Is blue with custom white SS strips and graphics. But yeah i had good luck with this hart brand working on Bret Michaels motorhome at my job yes the lead singer to poison Rock on bret Michaels frome the crew at RV Renovators in mesa Arizona
I just picked up a Hart tool set today! I got the $178 set with a drill, impact, sawzall, and flashlight. So far, I love them, especially for the money! 😀
I just bought that exact set today. Hope it serves well. It’s my first set of tools I ever bought. Being it’s made by the same people that makes ryobi and Milwaukee hopefully it’ll give a good life
I have been plumbing w.Ryobi for almost 7 years. I always told myself i would upgrade to DeWalt or Milwaukee but never needed to plus I've seen a grown man cry when their 300 dollar Milwaukee drill died. I've burnt up 2 drills & 1 sawzall over years of abuse. It's no big deal & i love upgrading my one+ tools anyway.
People are already calling them Fart tools. Children lol. You got to insulate that shop, Bro. R13 for 2x4 walls is on sale at Lowes for 15 bucks a roll.
How do these tools feel in hand? What is their build quality like? I am new to the tool world and am in the process of upgrading my Black & Decker to Ryobi and I can feel the build quality between those two. Love the channel, BTW
Oh my god I have to stop reading these comments. The brain cells I have left are leaking out of my fucking ears. 20v batteries are a nominal 18v under load. 20v doesn't mean more power unless you're braindead and believe the marketing tactic of HIGHER # =MO POWA. I mean cmmon I have m12 shit that will do donuts around any of that ryobi junk.
@@Zachariahfml who said anything about MO POWA, the same company who makes these is the same company that makes ryobi and Milwaukee It's weird that they went with 20v when their superior tools ( yes ryobi is slightly superior and Milwaukee is on another level ) have GOOD 18v Get your head at if your ass man.
@@mattchumoore4214 18v batteries are identical to 20v batteries bro 🤣 are you dumb. If you use a multimeter on a Milwaukee m18 when its fully charged you'll read 20v Dumbass.
My concern is longevity. Function out of the box is nice, but if the motor burns out or the switch goes bad after 3 months of use, it wasn't money very well spent. It will be interesting to see follow up videos made by people who actually use these.
This is funny. I just walked into the Wallymart last night, and noticed heavy Hart presence and B&D stuff on clearance. The lady noticed the 4-tool set(drill, impact, recip, light)on the shelf for 169. Well just 3 days ago, i bought the Kobalt 4-tool set containing the same arrangement of tools for a good bit more money so she naturally pointed it out. She quickly understood when i walked her over to the display area and handed her a couple of the Hart units. Seems to me they are pretty much copying Harbor Freight's strategy. Crappy tool for super cheap, okay tool for a little more money but still super cheap.
@@ManCaverTools yeah i missed that but frankly im fine with it because the original plan was to piece my Kobalt lineup together little by little over time.
It’s a safety feature so you don’t destroy the drills internal mechanisms. Also, I bet the drill bit you used for the 1” hole wasn’t as sharp as the 1-1/8”
Perfect for the home owner who occasionally runs a few bolts in. For us who find ourselves running lags every day or using the crap out of our tools, Milwaukee and dewalt are the go to
I do large sign installs and I use Hart daily. Hammer drill on par with my Milwaukee. Harts is brushless though but surprised how well they work in the field
People mistake impact driver and impact gun.... impact driver is for longer screws and some lag bolts.... impact gun is basically for removing Lugnuts or something that requires higher amounts of torque
that is an impact wrench. an impact wrench has for torque in reverse than in forward gear as an impact driver has more torque in forward gear than in reverse.
It's not bad I still like the beuer line I have both of those drills and I had them for over a year and never had issues I definitely looking forward to the 8 amp battery they're coming out with for the beuer
Yeah, Modern DIY Projects did the same tests you did with the same results, and he also complained about the white color being a big mistake. Your guys results prove the limits of these tools. OK for home use but nothing more.
I've been using hart since they came out and I have used every kind of power tool out there I've been in the construction industry for more than 20 year and union for the last 8 and I use my power tools for all my work outside work and I love them their vacuum will put Shop-Vac to shame
I will always trust my DeWalt, Makita, and big bad Bosch tools before any of this, but a cheapo set to throw and leave in the cabin while you're away ain't so bad Also recently discovered Ridgid has lifetime warranty :o
The reason why they're white is because every other color for tools is taken, white is the only color left for a tool company to use. Makita does use white but that's just their small compact tools.
Even though they are basically white Ryobi tools I still would not put them in the same category as Ryobi.... I would put these more on par with black and decker and harbor freight POWER TOOLS.... good for the very basic homeowner but if you do a lot of projects or have your own workshop I don’t see these holding up in the long run....Ryobi is far superior
Heres my question, Will that impact diver take off and put on lugs on a car or 1/2 ton truck with No rust on them? Thats a test Id like to see. Thank You for your time and vids.
Ryobi Man Caver sweet man, did you ever subscribe back to my channel bro, to help me promote my channel, I’m going to start shouting you out in my videos to help get you more views
Choose a slower speed with more torque instead of RPM so you can push harder in wood? No. He should just not push as hard and let the (sharp) bit do the work.
People mistake impact drivers and impact guns.... impact drivers are basically for longer screws and lag bolts.... impact guns are geared more towards Lugnuts on cars and things that require higher amounts of torque
And with both an impact driver and impact wrench it depends on the torque numbers on what you'll get out of the tool plus the battery that's what it boils down to and yes you're correct
Yes white is a mistake for tools... but neon green is a bigger mistake, makes ryobi tools look more like toys. Not a hater though im glad ryobi is around, i have the corded jigsaw and its never let me down.
I give up. My high end Makita went south on me for no reason, then they wouldn't honor the warranty, then my brand new Milwaukee blew out a bearing during its second use, and I wasn't even putting it under that much of a load. For now on I'm buying cheap stuff like Ryobi or maybe this Hart line. Quality tools are just a thing of the past I guess.
thanks for testing these products. As a beginner and diyer we need reviews of these sorts of things.
you are welcome and I thank you Der
Excellent set up in your shop bro,I love the different tools on the walls,my wife hates that I want 6 different brands of the same kind of tool,,Iim also wanting to know about that little Ryobi blower 😳,,that was cool
This is a very old video but i thank you
Good video, I just wish you would have pulled one of those DeWalt's off the wall to see if it could finish the 6 inch bolt.
I thank you for viewing.
Thanks for the test. I recently purchased the Hart 20V drill/driver to assemble Ikea Furniture.
I have other Hart videos out, check them out
You need to be in speed 1 for larger bits and spade bits for more torque.
thank you sir
He uses ryobi he wouldn't know
Facts!
@@Swaysb 😂😂😂
Yeah, would tear your hand off if you used speed 1
My compact C3 craftsmans (Ryobi) only have 1.5ah batteries and have been satisfactory for me during the last 4 years of use. I've remodeled a whole house with them and have always been impressed. 18v power at 12v weight. I've been impressed, and like my Ryobi stuff!
I love my Ryobi tools as well. I cant wait for more new Ryobi tools com out
Do those same hole tests with one of the Ryobis doing the exact same thing side-by-side
versus videos are coming up. im getting another kit tonight
It is based on an (older) Ryobi design so it is just a matter of matching it up to which one, or accepting that the Ryobis got better over time with each new model, like everybody else. However if you're serious about performance and speed, to get a fair amount of work done then you don't use a 1.5Ah battery so I don't see the point of the video. If you only have a small amount of work to do, what did it matter if it took a few seconds difference either way? This just isn't applicable to any real world use and need combination.
The real question is why would anyone choose Hart? It has no virtues over any other brand whether it be price or performance. Maybe Walmart will put them on sale so you save 10% but 10% is not enough difference to plan a tool line investment.
And make sure you drill right by the knot of the wood with Ryobi too.
@@stinkycheese804 well I just started in construction, I got them be because no one else has them, on th job site everyone has Milwaukee and DeWalt, I got them because they looked different and had no bad ratings, the only thing ppl say is they aren't contractor grade...I don't mind
@@stinkycheese804 I love the hand tools by Hart, and the grinder! I didn't buy any drills or impact, because I only use Milwaukee fuel hammer/impact set!!! Milwaukee makes the best drills and impacts! I'd use a m12 fuel before I'd use any other brand! Hart's hand tools are nice and cool
5:22 I 100% agree.
Thanks for another good video on the Hart tools. 👍🏽
I got some 4ah Hart batteries we will be revisiting this test
Just like my 20v black and decker. These tools are for DIY hobby people. I like the color
very good and thank you sir
Meh, professionals were using less powerful drills for decades. It's the non-pro who doesn't understand how to get the job done cost effectively, with what they have. Granted if you're drilling a bunch of 1"+ holes, you want a larger battery or a corded tool.
My Hart drill would drag your Black and Decker outside, stomp it in the dirt, take it's lunch money, fuck it's bitch, and nutt on it's pillow! 🤣 Hart tools are bad ass for their price point! 😎
This is probably the most unbiased review I've seen of Hart tools. From the research I've done, they don't seem that bad. Yeah they're not the greatest tools and there's infinitely better tools out there. But if someone wants to buy their tools at Walmart it's probably going to be good enough and get the job done
Yeah, a lot of these TH-cam reviews don't seem to realize that some people are just homeowners looking for a decent set of tools to do simple repairs around the house. Those people don't need to go out and buy a Milwaukee driver just to hang a few cabinets.
I bought a set of Hart for small projects and because now all my surviving brothers are pretty far away and busy. So I'm trying to teach myself how to do things. The impact driver isn't holding a bit right out of the box. I'm not sure I can hold that against the brand because it could just be a one off thing. But I'm pretty sure I'm installing the bit the right way. I have the trigger in the middle, battery out and I'm pulling the coupler forward, inserting the bit until it's all the way in and then letting the coupler ease back. The bit still just falls out or I'm able to pull it out with barely a tug.
But thanks for the video. It was nicely informative.
you are welcome and when you put a bit in the impact you might need to adjust the collit. pull it towards the front of the tool while you push the bit in. it should lock it in place
Is there is a charge time difference between the black and white Hart chargers.
I didnt test that but I will and I thank you for viewing Julian
@@ManCaverTools awesome, and thanks for the reply.
I 💙 my Hart tools! 😊 My only complaint is the lack of fuel gauge on the batteries. Aside from that, I'm happier than a tornado in a trailer park! 😅
The 4ah battery has a fuel gauge
@@ManCaverTools so does my 1.5Ah battery
@@tannerclement6251 same! seems the newer 1.5ah batteries have them, although my impact doesn’t i bought the drill and impacts separately like a dunce
I drove the same lag bolts... actually longer.... with my Milwaukee M 12 impact end it sunk them completely in less time.... in fact it countersunk them into the wood.... and these are supposed to be 20 V tools?
yes they are.
Milwaukee is in a different in tti tool range this is the bottom bracket along with Ryobi but it got the job done I'm an average guy I'm not going to sit there and be a fanboy of any tool line if the two works I'm happy with it and I respect your video and what you do thank you for sharing keep doing what you're doing
I mean it's a great platform to test and prototype solutions. It's easy money for TTI and they have all these other platforms to test under easier load applications to try new ideas without pissing off professionals with have baked solutions to every day problems.
Do remember the M12 and the Skil Brushless are the two most powerful 12v impacts out there - by a ridiculous margin. And at almost 1,700 in.lbs they're far more than these basic 20v impacts are even rated for. Remember the price difference here as well.
The knot might have caused a little trouble, but good honest review, good video! I'd never own a hart power tool but its interesting to see what they do lol
wood is unpredictable, but the test is there and I thank you for viewing Dark
This is a much more better video than your previous unboxing 👌
im not sure why people were majorly hating me cause I didn't like the color, and white is my favorite color. I found it funny lol
@@ManCaverTools I think it was because you kept going commenting throughout the unboxing about how you don't like the color white on the tool and I believe people got annoyed by that.
Why not so the brushless hart impacts?
I uploaded the brushless hart drill a few days ago
Noticed today at Walmart that Hart also has a smaller compact size impact drill driver that comes in a kit with a drill.
👍🏻👍🏻
I gotta see that
Man Caver Tools I guess it’s a brushless kit, drill and impact drill driver. 👍🏻👍🏻
Brushless impact kicks ass. I'm already looking at gen 2 from them. I do sign installs, fabrication. The hammer drill outperforms my buddies Milwaukee
Were these brushed or brushless?
they are brushed
Thanks for the video! I'm trying to look out for a buddy who wants a good DIY tool set. Looking for quality-to-price. I'll definitely be checking out the rest of your vids
I thank you sir and I am glad I can help
You were checking out the tools, be honest!
do you have a chart on those tests between the milwaukee, dewalt, ryobi, rigid and hart? and hyper tough...
I do not, I should do that, it would be nice to have it in the background as well
my hart impact had a "break in" peruod where it shut itself down several times during use, but after a year or so of owning it, it stopped doing that, and i dont use it for super difficult stuff.
i use it every day to remove and replace undercarriage bolts (8mm head), lug nut REMOVAL (19mm 3/8 drive to 24mm 3/8 drive ((with snap in adaptor, not the 3/8 drive impact. i have the exact same one you have, just got a socket adaptor.)), and to also do brake caliper removal and replacement with a torque stick to drive in, and a torque wrench to finish torque it.
I love the usefulness of my impact as an efficiency increase for automotive tech work.
i would not suggest using them to drive lug nuts in other than maybe to seat the tire before torquing to spec with a proper T-wrench.
OMG did you see the wobble on that chuck ???
I had a dewalt drill that had a nasty wobble even a Makita I had did that
yes I did and other brands wobble as well. Hilti as the least about of wobble in the chucks
I use mine everyday. Sign fabrication, installs. The large signs on the sides of buildings. The hammer drills great. All brushless though
Will the batteries from the hyper tuff tools fit these hart tools?
I will find that out and thank you
@@ManCaverTools cool thanks
Looks like the black an decker battery would
not bad for the price. seems like good homeowner stuff
that is correct, and I thank you sir :)
Picked up the 20v brushless drill and impact driver with 2 2ah batteries and charger kit for $89 and a 4ah battery and charger for $43 at my local Walmart. Hopefully that was a good deal
Is it wise to keep an impact drill in the car, to remove the lug nuts, incase of an emergency? And would the Hart be a good choice for that?
yes it is. it will make changing out a tire on the side of the road a walk in the park
A 1/4 inch impact does not have the power to remove lug nuts.
I bought the Hart impact because it could supposedly break a lug off cars and it wouldn't do anything on my little Pontiac lugs that were torqued to 80lbs ft. Save your money and buy something better if you want to remove lugs from a car.
@@poke2748 what do you suggest for lug nuts?
@@temping-sama definitely a stronger 1/2 inch impact driver preferably something brushless. You get what you pay for so keep that in mind. Make sure you purchase sockets rated for impact drivers too otherwise you'll have a very bad time.
You were into a knot with the 1" bit.
I think so as well
But so was the 1-1/8. I think...
Only knot on that 4 by. Ryobi pays you to much to be anidiot Ryobi man.
Thank you for bringing us some Hart tools. I see them, but I'm invested in one+ already. Boost the performance on those Hart tools by hardening the batteries! (Run ALL the way dead under load, and charge them fully 3 times).
I will be getting more hart tools to test out and do versus videos with and thank you
Looking forward to the comparison videos. I may have missed it, what Milwaukee do you have?
The Hart brushless drill kit (w/ 2.0Ah battery and charger) goes for $94 at my local WM. I picked up the Ridgid Octane Hammer Drill w/ 3.0 Octane battery and charger brand new with full warranty for $80 at my local HD. Granted that was 50% off the list price, but shop around and you can find great deals.
uploading one soon
What's your new years resolution?
lol I really don't have one.
I'm guessing that the motors overheat a little too quick with these
im guessing the same thing, im pretty sure the brushless model will run cooler
Cool. Like I had mentioned, just because the same company makes them, doesn't mean the specs are the same on the insides. You can see similarities from the same maker, but again there are only so many ways to design certain tools without them Not looking similar.
When taken apart & you see if the circuit boards are covered in moisture resistant coatings, wire thickness, plastics used, metals, etc... You can see where corners were cut to save $$ & offer them for cheaper compared to say DeWalt where you are paying more for Pro Grade tools.
I have seen quite a few Professional Contractors videos who use Ryobi tools everyday & are very happy with them. Great video guy!
Thank you sir and more tests are on the way
Obviously. I mean Milwaukee is the favorite child and the rest is just easy money for TTI
Awesome review 👍
Do you like Ryobi?
I Love a lot of tools that Ryobi makes.
Pre-drilling the holes for the lag bolts it would have no problem sinking that lag screw in. Im getting 1 tomorrow. Gonna use it to build my house where ever screws and power lags are needed. We'll see what it can do.
very good and thank you Earl
Thanks for testing them I know there a Walmart brand I was kind of iffy if they'll be worth the money
I think they are for a DIYER. and you are welcome
At home for handy dys but not for construction use everyday no..
2 tools 2 bats and a charger for $100 it's hard to go wrong. If the drill lived it's life on speed 1 and the driller actually let the flutes clean themselves out instead of laying down on it you wouldn't have any problems there. The impact is what it is but if you're not doing lags or timberlocks you're in business. I'm lucky to justify owning top of the line tools because I'm a professional but as a DIYer I'd still go Ryobi because the line encompasses so many more tools.
Thanks, I've been considering getting g the set with these and the reciprocating saw. Light duty DIY stuff is all i need them for, the price is reasonable, and they seem to do way more that I'll be needing....that 1 1/8 hole was suprising. And I doubt ill ever need to drive 1/2" lag bolts into undrilled tree stumps lol
if you can get the brushless versions. they are way better and will last a lot longer
Considering they are marketed for the DIY person and along with the price point I've seen they are not bad!
I agree and I thank you Erik
Perfecr tools for a DIY person. Ryobi man is an ass clown.
Just got me the 5 piece set on clearance for $99!👍🏼
Does that little ryobi heater work ok in a 1 car garage
Yes it does. Im not in the garage for too long sometimes. so it doesn't heat up, sometimes im in there for 6 hours sometimes im in there for 30 min
Very scientific testing
I thank you for viewing Helmet
I don't understand who are these tools for?
they are for the channel
@@ManCaverTools I meant.who are they markated towards.
@@gabrielfrias3980 mostly DIY projects. They aren't really meant for real heavy duty work like trying to force a drill bit through wood
Is it me or maybe the displays, but the trigger and buttons on all of them felt really cheap and almost throw away pastic... I was really disappointed. Just bc the price they are at.. did you see that?
but these tools are designed for the DIYer, so I think they will be successful in that department
Love your video's keeping coming
Thank you sir
What it do the 6 inch lag on a full battery just wondering
thank you sir, and Happy Holidays
Hart lost any interest I may have had, the 2nd time that drill driver stopped and you had to pull the battery and put it back on. Thought about getting a set of these just for friends/relatives who show up to barrow a drill etc, but I'll stick to my Dewalt and Milwaukee.
Nice video though and keep up the reviews!
im not a fan of hart either
It's some reject line problay just horder freight redraned
It's just a lighter duty tool for lighter duty jobs. Thinking it should be capable of the same jobs as a tool costing twice as much? Of course not, if there were no trade offs then the expensive brands wouldn't exist.
The key thing here is that all brands should cut off if you push them too hard. That is not a sign of a tool problem, rather one of a user expectation problem. 2nd key thing is, it saved the tool rather than self destructing.
This grade of drill is great for driving screws and other small to small-medium fasteners because it has a clutch. That even makes it superior to an impact driver w/o clutch for these SMALL fasteners. Many people get that backwards and think they should have 200 ft lbs of impact without a clutch on a small screw and try to drive it as fast as possible, wrecking the screw or bit eventually. Do it once and those seconds shaved off the work time disappear.
That’s good idea..never would of thought it till you posted it..buy cheap tools like air or corded impact extra...
Thanks 👊🏻👊🏻🍻
Gotta let the tool work not push down on it been useing this set for a while now on custom cabinets flooring body work roof work on motorhomes haven't had any issues I've even dropped the drill frome a 8" ladder and its still kicking i like the white color my tool box.and tool cart Is blue with custom white SS strips and graphics. But yeah i had good luck with this hart brand working on Bret Michaels motorhome at my job yes the lead singer to poison Rock on bret Michaels frome the crew at RV Renovators in mesa Arizona
Thank you sir and Happy Holidays
I just picked up a Hart tool set today! I got the $178 set with a drill, impact, sawzall, and flashlight. So far, I love them, especially for the money! 😀
very good. its a good set for the dryer and home owner and I thank you so much for viewing
I just bought that exact set today. Hope it serves well. It’s my first set of tools I ever bought. Being it’s made by the same people that makes ryobi and Milwaukee hopefully it’ll give a good life
By the way I love your videos dude.... keep them coming!!!👍🏻
Thank you sir :)
That a nice looking impact wrench, ya dope
Big Daddy Throckmorton thank you so much for viewing sir
I have been plumbing w.Ryobi for almost 7 years. I always told myself i would upgrade to DeWalt or Milwaukee but never needed to plus I've seen a grown man cry when their 300 dollar Milwaukee drill died. I've burnt up 2 drills & 1 sawzall over years of abuse. It's no big deal & i love upgrading my one+ tools anyway.
I love Ryobi :)
white is OK. lets you see the tool from a distance and easier to grab in low-light. Neon green is better of course.
Has anyone tried the hart drill bits just wondering if they are any good
they are not good. id get the better brands on the bits
Yeah I kind of figured that was the case a 200 piece drill bit set for $35
People are already calling them Fart tools. Children lol. You got to insulate that shop, Bro. R13 for 2x4 walls is on sale at Lowes for 15 bucks a roll.
I do, future plans.
How do these tools feel in hand? What is their build quality like? I am new to the tool world and am in the process of upgrading my Black & Decker to Ryobi and I can feel the build quality between those two. Love the channel, BTW
They do t feel that bad in your hands. Nice grip
I've switched from Milwaukee to Hart. I love them
Seems odd to me that they went with a 20v battery system when ryobi and milwaukee both have good 18v batteries.
I agree
Oh my god I have to stop reading these comments. The brain cells I have left are leaking out of my fucking ears. 20v batteries are a nominal 18v under load. 20v doesn't mean more power unless you're braindead and believe the marketing tactic of HIGHER # =MO POWA. I mean cmmon I have m12 shit that will do donuts around any of that ryobi junk.
@@Zachariahfml who said anything about MO POWA, the same company who makes these is the same company that makes ryobi and Milwaukee
It's weird that they went with 20v when their superior tools ( yes ryobi is slightly superior and Milwaukee is on another level ) have GOOD 18v
Get your head at if your ass man.
@@mattchumoore4214 18v batteries are identical to 20v batteries bro 🤣 are you dumb. If you use a multimeter on a Milwaukee m18 when its fully charged you'll read 20v Dumbass.
@@mattchumoore4214 you have no idea what you're talking about so just shut up.
I died laughing when I saw the tiny hair dryer....
very good and thank you for viewing
Why did it keep stopping
You need the Brushless ones from Hart bigger difference
I like the color
I like the color as well, I just wish they put a clear coat on them
My concern is longevity. Function out of the box is nice, but if the motor burns out or the switch goes bad after 3 months of use, it wasn't money very well spent. It will be interesting to see follow up videos made by people who actually use these.
long term use, I think they won't last long if you use them every day for a while
Almost a year daily with brushless impact, drill and hammer drill, I upgraded to the larger battery other than that no problems.
So uh how uh did you uhhhhh feel about the uhhh tools
I am a woodworker, white is fine, if you are a mechanic then no color is good
This is funny.
I just walked into the Wallymart last night, and noticed heavy Hart presence and B&D stuff on clearance. The lady noticed the 4-tool set(drill, impact, recip, light)on the shelf for 169. Well just 3 days ago, i bought the Kobalt 4-tool set containing the same arrangement of tools for a good bit more money so she naturally pointed it out. She quickly understood when i walked her over to the display area and handed her a couple of the Hart units.
Seems to me they are pretty much copying Harbor Freight's strategy. Crappy tool for super cheap, okay tool for a little more money but still super cheap.
I got the kobalt brushless 6 piece tool set for $200, gotta take deals while they are here
@@ManCaverTools yeah i missed that but frankly im fine with it because the original plan was to piece my Kobalt lineup together little by little over time.
Impact driver do fine for small bolts in auto repair that’s bout all I’d use it for 1/4 sockets to make quick work of them
yes they do. I like to do extreme tests
I usually predrill for that long of a lag bolt. It’s easier on any tool. But I understand it’s for a test.
It’s a safety feature so you don’t destroy the drills internal mechanisms. Also, I bet the drill bit you used for the 1” hole wasn’t as sharp as the 1-1/8”
the spade but was bent I think, I got all new spade bits since this video and thank you for viewing
Perfect for the home owner who occasionally runs a few bolts in. For us who find ourselves running lags every day or using the crap out of our tools, Milwaukee and dewalt are the go to
thank you sir, and Happy Holidays
Ryobi Man Caver you as well!
I do large sign installs and I use Hart daily. Hammer drill on par with my Milwaukee. Harts is brushless though but surprised how well they work in the field
People mistake impact driver and impact gun.... impact driver is for longer screws and some lag bolts.... impact gun is basically for removing Lugnuts or something that requires higher amounts of torque
that is an impact wrench. an impact wrench has for torque in reverse than in forward gear as an impact driver has more torque in forward gear than in reverse.
It's not bad I still like the beuer line I have both of those drills and I had them for over a year and never had issues I definitely looking forward to the 8 amp battery they're coming out with for the beuer
very good and thank you
dude i have bauer and for the price and power they have. i choose bauer over ryobi.
Yeah, Modern DIY Projects did the same tests you did with the same results, and he also complained about the white color being a big mistake. Your guys results prove the limits of these tools. OK for home use but nothing more.
that is what these were priced out at, designed for the home owner, but that doesn't make this a bad tool. and I thank you for viewing sir
I've been using hart since they came out and I have used every kind of power tool out there I've been in the construction industry for more than 20 year and union for the last 8 and I use my power tools for all my work outside work and I love them their vacuum will put Shop-Vac to shame
When they are fresh out of the box they lock up under use sometimes, but later on they work much better which caused the issues with the first hole.
Most would pre drill the holes ,so it’s not bad for this drill
but it makes a good test to no pre drill
I will always trust my DeWalt, Makita, and big bad Bosch tools before any of this, but a cheapo set to throw and leave in the cabin while you're away ain't so bad
Also recently discovered Ridgid has lifetime warranty :o
I agree lol
Look at the charger closely before you buy no spokes person just dont want people to waste their money..
thank you sir
The reason why they're white is because every other color for tools is taken, white is the only color left for a tool company to use. Makita does use white but that's just their small compact tools.
very good and thank you for viewing
Even though they are basically white Ryobi tools I still would not put them in the same category as Ryobi.... I would put these more on par with black and decker and harbor freight POWER TOOLS.... good for the very basic homeowner but if you do a lot of projects or have your own workshop I don’t see these holding up in the long run....Ryobi is far superior
very good, we still have a lot of Hart tools to test out
I agree putting it up against black & decker, but hart looks better than crap and decker, choice between hart or black & decker, I'll choose hart
Can someone help, my hammer drill chick jaw doesn’t come out or is stuck
you might need to use 2 hands and hold a certain part of the chuck to loosen it
It sounds like it is straining
it was, it didnt perform that greatly
I will continue to view, I subscribed and I am impressed with your Ryobi cave
I thank you Liston :)
Heres my question, Will that impact diver take off and put on lugs on a car or 1/2 ton truck with No rust on them? Thats a test Id like to see.
Thank You for your time and vids.
More tests coming soon
It's only a 1/4 impact driver. You need a 1/2 impact wrench for that and the Hart website says they have one coming.
Man this guy must love ryobi
This video is very old
I’m going to stay with what I know works home use or commercial dewalt is the Best
Thank you very much and I agree
Yes, Dewalt is the best!
Except it's not 😂
@@Zachariahfml might just be for price and vs usability
You should have tested them in speed one broski!!!! I wonder if it would have did it easier
More tests are coming soon
Ryobi Man Caver sweet man, did you ever subscribe back to my channel bro, to help me promote my channel, I’m going to start shouting you out in my videos to help get you more views
Choose a slower speed with more torque instead of RPM so you can push harder in wood? No. He should just not push as hard and let the (sharp) bit do the work.
People mistake impact drivers and impact guns.... impact drivers are basically for longer screws and lag bolts.... impact guns are geared more towards Lugnuts on cars and things that require higher amounts of torque
yes they do
And with both an impact driver and impact wrench it depends on the torque numbers on what you'll get out of the tool plus the battery that's what it boils down to and yes you're correct
Yea. You kept brining the second bit up to catch speed
I thank you for viewing Salvador, this is an older video
dude, wood doesn't test a drill, metal and concrete does? might as well have drilled into cold butter?
These are DIY tools. I don't think they are bad tools for that purpose
I wouldn't be buying hart to drill concrete or metal. Concrete maybe if they come out with a hammer drill.
Hart WILL be a ryobi killer. Mark my word
That drill looks almost identical to the porter cable one an they do the same thing
indeed and I thank you so much for viewing
You’re welcome an remember the best tools are hand tools
U should compare it to the ryobi
I did, look at more videos and thank you
Yes white is a mistake for tools... but neon green is a bigger mistake, makes ryobi tools look more like toys. Not a hater though im glad ryobi is around, i have the corded jigsaw and its never let me down.
Thank you and Happy Thanksgiving
I can always find my Ryobi tools ...at home and at work....green works for me
Works for Blippi too, hahaha!!!😂 th-cam.com/video/q7ntpU-egbE/w-d-xo.html
Tbh I never use my impact driver for lag I used my 1/2" impact wrench
You should, because they are able to do the job
The 1 1/8 he backs it out the clear the chips
Yep. Just like you’re supposed to. Just bearing down w a bit non stop w o clearing the particles out of the way is tough on any tool
That's what these tests are for, these are stress tests to see what the tool can handle.
These are stress tests on these tools. sometimes I put more strain on the motors to see what they can do
Think I'll just stick with my makitas after seeing that first test
Id stick with makita as well
The drill looks identical to my ryobi blue drill
it does look familiar, thank you for viewing
I give up. My high end Makita went south on me for no reason, then they wouldn't honor the warranty, then my brand new Milwaukee blew out a bearing during its second use, and I wasn't even putting it under that much of a load. For now on I'm buying cheap stuff like Ryobi or maybe this Hart line. Quality tools are just a thing of the past I guess.
sometimes the cheaper solution is the better one.
Go Porter Cable, only ones i use and decently priced too
@@scottsgamingtv7168 Hey thanks for that tip, I'll give them a try.
That is a huge knot in the wood
indeed it was and I thank you Paige
I know it’s a included battery but i would be willing to bet the 4Ah battery will give em
More performance.
I have more videos of Hart and yes the 4ah battery is a powerful one
White sunglasses are way more of an issue than white tools!
Thank you and Happy Thanksgiving