Thank you guys so much for watching! For more details on the fire table concrete form dimensions, check out my project blog article at: atimprovements.com/diy-fire-pit-table-how-to-build-your-own/ Thanks!
Nice! So what determines the *BTU* factor...if it will generate 40,50,60k, etc? *2ndly,* does the site offer BRASS burners, & lastly, can you actually cover the entire burner & holes, & the flame finds it way around the glass or rocks or w/ever you place in the pan?
That’s an awesome build, we’ll done! I want to do one like that but I have a couple of key questions before I go ahead. How hot is the firepit? Does it keep you warm enough to stay out on chill nights? And how long the small gas bottle last? Many thanks
Very cool. In the process of demolishing a house behind ours we bought to build a yard. Fire pit is on the building plan. This one is brilliant! Thanks for the video. I watched your transformation video yesterday. Wow
Hello glad to see you again 🙌😄 I was waiting for a new video to see what you are new prepared this is awesome 👏 perfect work 👍why didn't a little closer to make something for me 🙌😄 Greetings and support from Serbia 🇷🇸❤
Could bbq parts be substituted since they are more likely available bbq parts would work the same. They have regulators, different types of burners, tank adapters. And could pick up sheet metal from local parts shop and shape it with a metal break and welded it. Just wondering if aluminum dispersal of heat fast then just regular steel. To bring cost downs.
Pretty cool. I noticed there was no venting or was there? Typically venting would be set low for propane on all 4 corners and higher venting for natural gas.
Hi! Unfortunately, I do not. I just kinda "winged" it. I bought some drawer slides on amazon and then simply attached a piece of cement board to it. It wasn't perfect, but it worked for me!
I really want to make one, but i don’t think I can make the table top out of concrete since there’s no one to help me lift it, sadly. wish me luck! I’m gonna need it!
Great video. really enjoyed how the creativity works here. Question if i may, do you have any form of protection for your deck from the fire table's heat? I was told that there should be a type of protection to prevent the heat from ruining your deck (wood or composite). Any thoughts on this?
Hi Jack! I don't have anything for protection underneath my fire table. So far, the base really doesn't get hot at all. The pan get's a little warm, but nothing I would be concerned about. That said, protection is always good to have. Better safe than sorry. Thanks for watching!
That weld on the manifold looks horrible (10:07). Great video on the entire build but that weld makes me question the remaining quality of the fire pit kit.
Hi - I bought most of the stuff from home depot but I got the fire pit components from easyfirepits.com. I have links to everything in the video description. Thanks for watching! Appreciate the support!
Hi Matt! I am not worried about the LVT at all, that stuff is super durable and waterproof. I am little worried about the longevity of the construction adhesive (I used exterior rated), but time will tell. I am covering it up before every rain, so hopefully that will help with the lifetime. Thanks for watching!
@@AndrewThronImprovements looks really good! Hopefully it stands up. Covering it will definitely help I'm sure. Been watching all your videos- getting ready to do a shower and that's how I found your channel!
Hi! It was definitely a bit pricey. I would estimate that you really would be hard pressed to complete this project for under $500. Between the propane, fire table insert kit, etc. It adds up pretty quick. But I love the table and use it all the time! Thanks for watching!
I just noticed that after your comment. I couldn't tell you tbh. Smoke is never really an issue at all. That may have just been the angle/lighting. Thanks for watching!
So cool! I finally found solution for my outdoor propane bathtub 😂😂👏👏👏🤘🤘🤘
Thought of this but that sitting brick wall fire pit tough to beat
Thank you guys so much for watching! For more details on the fire table concrete form dimensions, check out my project blog article at:
atimprovements.com/diy-fire-pit-table-how-to-build-your-own/
Thanks!
Nice video, thanks for sharing. How did the LVP planks hold up over time with heat dissipation?
Super talented.
Appreciate it, Lashonda 👍Thanks for Watching!
Beautiful!
not bad I like the way you built it. Different but perfectly ok and very nice.
Very good idea to conect to house gas line but not for propane thank
You really help me with my project bro ,this is a great made video thank you
Nice! So what determines the *BTU* factor...if it will generate 40,50,60k, etc? *2ndly,* does the site offer BRASS burners, & lastly, can you actually cover the entire burner & holes, & the flame finds it way around the glass or rocks or w/ever you place in the pan?
Thanks for sharing..🍻🇿🇦🇿🇦🇿🇦
That’s an awesome build, we’ll done! I want to do one like that but I have a couple of key questions before I go ahead. How hot is the firepit? Does it keep you warm enough to stay out on chill nights? And how long the small gas bottle last? Many thanks
Great project and great video! Thank you for sharing!
This was amazing
Very cool. In the process of demolishing a house behind ours we bought to build a yard. Fire pit is on the building plan. This one is brilliant! Thanks for the video. I watched your transformation video yesterday. Wow
Awesome video thanks, how much did you spend on the project? How far must the burner and pan be from the tank?
The more space between the burner and the tank the better!
I think I spent around $800 for everything - it's a bit pricey. Thanks for watching!
Would love to try and build this myself. What was the total cost of the build?
I used Easyfirepits also. Working with them was easy and people are delightfully surprised by my fire table.
I've looked at a few videos and I love this the best 😀 👍🏿📣
I appreciate it the kind words, Rudy! Thanks for watching 👌
Great video very informative only one question is it safe to have the gas bottle next to the heat and flame please.?
Thank you so much!
You're welcome! Thanks for watching!
Hello, could you provide more details on how you installed the drawer slides
Amazing job man!!
This was awesome! I absolutely love it. Great work❤
That is 💣. Can’t wait to make ours
Hello glad to see you again 🙌😄 I was waiting for a new video to see what you are new prepared this is awesome 👏 perfect work 👍why didn't a little closer to make something for me 🙌😄 Greetings and support from Serbia 🇷🇸❤
Appreciate the continued support! Thanks for watching!
Could bbq parts be substituted since they are more likely available bbq parts would work the same. They have regulators, different types of burners, tank adapters. And could pick up sheet metal from local parts shop and shape it with a metal break and welded it. Just wondering if aluminum dispersal of heat fast then just regular steel. To bring cost downs.
So do you have to turn on the propane on the tank itself every time? Or can you turn the valve on the outside you installed? Thanks man. Amazing job👍
That's awesome dude! Looks great!
Appreciate it! Thanks for watching!!
Awesome vid. Definitely will help me when I'm ready. How did you do the sliding door?
I really wish you did explain how you built the frame step by step
الله يبارك ما شاء الله روعة😊
Appreciate it!
Very creative… Looks great!!
Appreciate it, Ash!
Unique
Hi there ,
Can they ship to Europe ( Italy as well)
Pretty cool. I noticed there was no venting or was there? Typically venting would be set low for propane on all 4 corners and higher venting for natural gas.
Beautiful job dude. I just subscribed. ❤️❤️
what a nice build! Do you have any closeups how the slides were installed? Can't tell from the video
Hi! Unfortunately, I do not. I just kinda "winged" it. I bought some drawer slides on amazon and then simply attached a piece of cement board to it. It wasn't perfect, but it worked for me!
I really want to make one, but i don’t think I can make the table top out of concrete since there’s no one to help me lift it, sadly. wish me luck! I’m gonna need it!
😂😂😂 I will make one too ...
If you need help tell me ...
It will cost you 700€ at hour😂
Great job. How much clearance do you have between the base of the burner pan and the top of the tank?
Hi Ed - It's approximately 6" from the top of the tank to the burner. In hindsight, I should have left more clearance. Thanks for watching!
@@AndrewThronImprovements why so?
Is that a horizontal propane tank or a vertical propane tank?
Thanks a million. What was the BTU on your firepit?
what was the overrall cost assuming you have all the tools?
Nice build 👌 New subscriber 💥🇺🇸💫
Thanks for the support!
This is perfect for those chilly fall nights! Looks amazing, great work! :)
Agreed! I doubt it will get much use this summer. Thanks for watching!!!!!
Appreciate you!
Does it actually give off much heat?
Great project. How much did it cost?
Nice vid man!
Thanks for the continued channel support! I appreciate it!
You rock
Appreciate you watching!
Well done!
Appreciate it! Thanks for watching!
Cool!
Great Video - Simplest and best instructional I have see
Glad it helped, John - Thanks for watching!
Great video. really enjoyed how the creativity works here. Question if i may, do you have any form of protection for your deck from the fire table's heat? I was told that there should be a type of protection to prevent the heat from ruining your deck (wood or composite). Any thoughts on this?
Hi Jack! I don't have anything for protection underneath my fire table. So far, the base really doesn't get hot at all. The pan get's a little warm, but nothing I would be concerned about. That said, protection is always good to have. Better safe than sorry. Thanks for watching!
Great build. What is the height of the base?
How much did it cost you in material?
That weld on the manifold looks horrible (10:07). Great video on the entire build but that weld makes me question the remaining quality of the fire pit kit.
Cheaper to just have bought it
How long does the gas tank last?
I would say probably for 20 hours of run time. But depends on how much you throttle the gas. Thanks for watching!
Where did you buy all the materials and how much did it cost overall?
Hi - I bought most of the stuff from home depot but I got the fire pit components from easyfirepits.com. I have links to everything in the video description. Thanks for watching! Appreciate the support!
Nice but needs casters
why would you 'calculate' the center rather than just draw lines between diagonal corners?!?
Haha fair point. They both get there but your method is probably a bit easier 👍
Do you think the LVT will hold up?
Hi Matt! I am not worried about the LVT at all, that stuff is super durable and waterproof. I am little worried about the longevity of the construction adhesive (I used exterior rated), but time will tell. I am covering it up before every rain, so hopefully that will help with the lifetime. Thanks for watching!
@@AndrewThronImprovements looks really good! Hopefully it stands up. Covering it will definitely help I'm sure. Been watching all your videos- getting ready to do a shower and that's how I found your channel!
@@limpfinger12 Fingers crossed! And right on, Man! Hope it turns out great!
What are the base dimensions please?
How much would you estimate it cost you to make this?
Hi! It was definitely a bit pricey. I would estimate that you really would be hard pressed to complete this project for under $500. Between the propane, fire table insert kit, etc. It adds up pretty quick. But I love the table and use it all the time! Thanks for watching!
Why was the table smoking like a real wood fire at the end of the video ?
I just noticed that after your comment. I couldn't tell you tbh. Smoke is never really an issue at all. That may have just been the angle/lighting. Thanks for watching!
Sorry, but laying a propane tank (with the fill valve on top) on it's side is NOT the brightest idea
and extremley dangerous too.
Toller Handwerker
This TH-camr only copied MrFixIt DIY and just made it longer so it’s not obvious.
Ref: th-cam.com/video/X5NTMjaHals/w-d-xo.html
Definitely took inspiration from a lot of the DIY TH-camrs! Thanks for watching!