My very first machine was the Dream Machine. I loved it so much, and I helped purchase the Inovis 2500D for my sister (because I love her, and she and I have the same interests) that was in 2016/2017. Then when the Luminaire came out, I could not help myself and I bought that one, gave my sister my Dream Machine and traded in the 2500D. That was in 2018/2019. Now I have purchased the Aveneer, we're trading in the Dream Machine and my sister is getting the Luminaire, which has been upgraded to a Luminaire III. SOMETHING IS WRONG ME, OBVIOUSLY! Hahahahahahahahahahaha! Catheys Sew & Vac just notified me that my Aveneer is ready for pick up. I feel like a HAPPY SNOOPY, DANCING ALL OVER THE ROOM!
Becky, I watched after hours this video. I wanted to commend you on your enthusiasm despite all the issues you came across with Darla. How you just improvised and still maintained a great attitude. You are very transparent and calm. Love you, what an amazing class!! ❤
I just went through the same thing today with a different design. I was using a pre-wound bobbin. So, after doing everything that Becky did today, I rewound my own bobbin; and it started working fine.
Does Darla need a trip to the spa? Your hair DOES look great!! This is a great demo of how to work with problems. All of your efforts are helpful for someone's problems!
How do you see the comments when watching the play back?? Also, fantastic showing the Trimmer by George ! I learned i have to go get a 60 mm cutter for mine. Have not used it yet and bought my friend one. Yaaay!!! Soooo helpful. I think you could not have coreographed any probs better for a demo!!! Love it!!! You are awesome!!
I also hate to slow my machine down. I run my industrial at 800-900 spm even though it is rated for 1200. At 1200 it will vibrate across the floor. When I take a machine in not only do I take a sample stitch out I make notes on it at what point I made what changes. Changed needled here. Changed thread here. Changed bottom here. Etc.
My very first machine was the Dream Machine. I loved it so much, and I helped purchase the Inovis 2500D for my sister (because I love her, and she and I have the same interests) that was in 2016/2017. Then when the Luminaire came out, I could not help myself and I bought that one, gave my sister my Dream Machine and traded in the 2500D. That was in 2018/2019. Now I have purchased the Aveneer, we're trading in the Dream Machine and my sister is getting the Luminaire, which has been upgraded to a Luminaire III. SOMETHING IS WRONG ME, OBVIOUSLY! Hahahahahahahahahahaha! Catheys Sew & Vac just notified me that my Aveneer is ready for pick up. I feel like a HAPPY SNOOPY, DANCING ALL OVER THE ROOM!
Becky, I watched after hours this video. I wanted to commend you on your enthusiasm despite all the issues you came across with Darla. How you just improvised and still maintained a great attitude. You are very transparent and calm. Love you, what an amazing class!! ❤
I commend the efforts you put into this one. I would have used so many choice words, the swear job wouldn't been full. TY for sticking with it.
Way to keep going Becky. I would have gotten too flustered and just said Goodbye everyone I'll see you tomorrow.
You could not have come up with more things that can go messed up and yet you are soooo ready for the demo! Way to go Becky!!
I just went through the same thing today with a different design. I was using a pre-wound bobbin. So, after doing everything that Becky did today, I rewound my own bobbin; and it started working fine.
Wow! What a day you had. Good recovery.
Does Darla need a trip to the spa? Your hair DOES look great!! This is a great demo of how to work with problems. All of your efforts are helpful for someone's problems!
I just got a luminaire 1 that was updated to a 3. I love it, love it, love it.
Morning, had somebody to the airport this morning. It's nice to connect with my family when I take them to the airport
Just a reminder for watching later: Multineedle starts at 1:23.
BL 14x14 hoop is for split designs. You can make lots of designs a split design in Embrilliance. FYI
If I’ve learned one thing, it’s a good day! Guna get the trimmer by George!
I don't see a hot mess. I see opportunity to have fun!!
Becky it is so helpful to see how to do the stops when putting in the 10 needle! Thanks! Have barely used my 6 needle
Do you still do videos for designs by ju ju? I loved the details and explanations you did.
I'm sitting here watching the replay telling you to check the bobbin area for a caught thread.
I had the same issue with my 😢 thread, on red and green. I slowed down my machine to 600. I changed thread brands. Still fighting thru it
Pull out and check the bobbin case for Knicks or burrs.
How do you see the comments when watching the play back??
Also, fantastic showing the Trimmer by George ! I learned i have to go get a 60 mm cutter for mine. Have not used it yet and bought my friend one. Yaaay!!! Soooo helpful. I think you could not have coreographed any probs better for a demo!!! Love it!!! You are awesome!!
My brother nv1e will only emroider with top stitch needle because the needle has a larger eye
Do you need to use a nonstick needle maybe?
Becky do you ever use My Connection on Scan N Cut? Debating if I really need it. I would need to upgrade from my 225 DX.
My connection allows your scan and cut to talk to your computer. You also use it to access CanvasWorkspace.
If you don't mind using the USB then it wouldn't be worth any upgrades, IMO
try flipping you bobbin so thread coming out counter clock wise
What brand of coffee do you enjoy?
When are you getting your Aveneer?
I also hate to slow my machine down. I run my industrial at 800-900 spm even though it is rated for 1200. At 1200 it will vibrate across the floor. When I take a machine in not only do I take a sample stitch out I make notes on it at what point I made what changes. Changed needled here. Changed thread here. Changed bottom here. Etc.
Hey Becky, where did you get your multineedle machine cabinet. I absolutely hate the one that came with my machine. The storage is awful.
Have you change out the needle
Take the bobbin cover off and check.
OH MY HOSH,!! Becky I would have walked away after spanky started acting up
Where is the frame link. I need one of those?the metal frame that is holding your project.
Aren’t you supposed to put the thread through a top hook if it’s threaded above? Hard to explain
Becky are you going to upgrade to the Brother Aveeneer?
Did you rethread?
It's the machine, not the thread!
OH MY HOSH,!! Becky I would have walked away after spanky started acting up