Thanks a million anytime my serger thread burst I always try to do it by myself but can't I always make a mistake. So I always have to come back to this video and you'll guide me through....what will I do without you thanks a lot 😊
Hi Burley, I bought my surger and delayed using it for about 6 weeks, because I needed to make time to read the manual. After reading partly of how to thread it, I decided to research on youtube and coincidentaly found this video. I was impressed at how easy, straight foward and convenient this video was in showing how to thread this machine. I really appreciate and am thankful for the help. I highly recommend this video by Burley.You're an expert with this machine! Thanks again.
Thank you so much for being so descriptive and zooming in. I can’t stand the videos that are shot from 5 feet away and don’t zoom to show you what to actually do haha
I have owned this serger for about 4 years. I've never successfully threaded it myself until today. Your video is the first that made me fully understand how to manage it on my own. Thank you for your exceptional and easy direction. You have uncomplicated it for me.
God bless you for this!!!! I haven't touched my serger in years. Been tucked away in the garage. Since I'm home during this pandemic, I decided to pull it out and my brain went into shock, because I couldn't remember how to thread this machine after all these years. I figured I'd follow the diagrams, but then I thought "LOOK FOR A TH-cam INSTRUCTIONAL VIDEO!" And here you are. Thank you!!
You are a FREAKING saint!! I bought this machine two years ago and never understood how to thread it. Now my work can look finished and professional!!! Ugh! I could Kiss you!!!! 😭
I can’t tell you how many videos I’ve watched to get information on this serger. I’ve been so intimidated by this machine that it’s just been sitting on my table ‘cause I was afraid of breaking the thread it came with. I didn’t know how to thread it and have had a project the kids gave me sitting around for months without touching this thing. You’re video was so clear that I’m finally understanding how to thread it. The diagrams and small parts on the machine made the diagrams less than clear. Your video was awesome. Can’t wait to see what other videos you have on this serger. Thank you so much!
I purchased my serger about 4 months ago and every time I have to thread it I search for this video. Thank you for a great no-nonsense video that gets right down to business!
Bless you! My mom Was about to lose her mind trying to figure out what was going on with her thread. She’s making surgical masks to donate to the hospital and watching your video, she fixed it in five minutes. You rock
Same here - I pulled my serger (that I've never used) out of storage to make masks and could make no sense of the directions that came with the machine. Now I've threaded the machine and successfully sewn with it for the first time! On the make a stack of masks for family and friends!
What issue were you having? I am trying to change out the thread cone for my upper looper and now I'm not getting a chain. Do you need to un-thread all 4 and redo in this order?
@@natashadowning2363 if you tie the new thread tightly to the old thread & clip as close to the knot as possible you can then open the tension disc and slowly pull the new thread through the eye without the need to rethread everything. Don't forget to reset the tension when you finish.
My serger thread broke, which is always tricky to re-thread. I came across your video some time ago, and it's by far the most helpful guide for re-threading my serger. Thank you once again for creating this tutorial!
I had this serger for a year and couldn't figure out how to thread all 4. Thank you. I was able to thread all 4 and it was simple and nobody got hurt (smile) . Thanks again.
I just can’t believe it ! I’ve owned one of these over lockers for 4-5 years x never managed to get it working. But after your tutorial..... I’m using it . So so grateful.
Thank goodness for this video. I rethread my serger fairly often - especially since I started making kid masks to donate - and sometimes nothing goes right until I find and watch this video again. Much easier to understand than the official Brother instruction video.
While I was waiting for my serger to come in the mail I started watching videos on how to thread it and your video was the best... When I got my serger I threaded it for the first time while watching your video and I had no problems... thank you for this awesome video
Oh my Lord, thank you! I got my serger as a gift 2 years ago and let it sit there because I was too intimidated to thread it. You made it easy! I only wish I would have found your video sooner!
This was the easiest video I have seen. I was pretty upset the dvd that came with it did not explain it as well as you did. Thanks a lot for taking time to teach me step by step. Now I am not so discoursed. And I will be able to sew with ease.
So happy I followed these clear and concise instructions. Haven't used my machine for a few years and successfully threaded it after the first time. You saved me hours of frustration! Thank you!
I have a Huskylock 936 and I have spent ALL DAY trying to thread this machine and can’t get it right. This is the hardest machine to thread ever!! After watching Burly Sew thread the 1034D serger I see a new Brother 1034D in my future. Thanks Burly Sew.
I’ve just got my Brother 1034D today, but ordered it three days ago and have been watching the different youtube videos on it. I have to say Burley Sew is by far my favorite instructor. Not a lot of excess chit chat insignificant things like what they ate recently or why they chose a certain color fabric. I appreciate that. Gets to the good stuff without static.
I haven't purchased my serger yet but will be soon. All I've heard was how hard they are to thread. After watching this video, I'm not even going to bother with the threading instructions that come in the box. If you can't get it after watching this video, I'm not sure you will. It doesn't get any easier than this folks. Thank you Burley Sew!
This was a total game-changer - your clear visuals finally helped me thread the machine my mom gave me years ago that I was too intimidated by to muddle through. Very glad to have found this channel.
I will watch this every time I rethread my serger until I can do it in my sleep. I have done it twice and the directions are perfect. I get a perfect chain every time!!!!! Thanks so much for this video!!!!!!!
Thank you once again. I don’t use it often and when I do, I always refer to this video. Purchased 2nd hand with zero knowledge. Hope to take lessons some day. Have a good day.🌞
Such a helpful video! Especially since it’s Monday morning as I watch, I love the “regular” language like “slidden” made me smile. Your videos are always my first go to. thank you.
BEST VIDEO for threading the Brother 1034. Thank goodness you made this video!!!!!! I use to spend hours threading, rethreading, rethreading.... on and on. I really am not an idiot but somehow I never got it accomplished until I watched this video. Thank you BURLEY SEW!!!!!! It was removing the foot which made a world of difference.
Just received my new serger today and I am saving this video because threading was very intimidating until I saw this. I know I will refer to it again and again! Thank you!
Thank you so much for this tutorial! I bought an old speedylock 299 serger at a church rummage sale and could not figure out what I was swing wrong! I was finally able to thread it correctly with your help! Thank you. thank you, thank you!
Thank you so much for making a Brother 1034D threading video that was so easy and clear. You took something that looked so complicated and made it easy. Again I can not Thank You enough.
I like the video, I just got my new brother sewing maching Model #1034D Serger I am so happy, I am on my way to making surgical hats and mask,Thank ayou so much.
I thank God for you I had been serging for over 30 yrs and have got a headache when time to rethread , Thank you so very much for making my life simple
Just wanted to say thanks for sharing your talent with others…I am very glad to be able to use my serger again and have saved your video to my favorites…thanks again
Can’t imagine being restricted to only using a manual! My go-to video for threading. No apology needed for using “sliden” crazy words like that stick in the memory and actually help the info stick better in an older brain like mine! 🙃
I cannot thank you enough for your video on threading. I have the sister model to the 1034d. I have the 1634d which is the exact same machine. Your video explained so much more than the stupid manual. You made it so much easier. Thank you sooooo much.
I Was dreading learning how to use a serger and the instructional video that came with the machine was horrid. Thank goodness yours was the 1st video i stumbled on. so easy to follow. No on to the next step. Thank you!
My boyfriend bought me this machine and I had no Idea how to thread. I so am impressed with this video! If I don't understand it, I can go back and look again, and do it right. Thank you so much, for helping a beginner on a serger. You made it simple and you took close up pictures. Excellent video!
Thank you so very much for taking the time to help “we” who read instructions but still haven’t the faintest idea what they are trying to say. This was extremely clear!
I work at a library and we have a serger for the community to use. It was de- threaded by a user. I used your helpful video to re- thread our serger. I did so fast i started laughing at how marvelous it worked out. Thank you so much. You are a youtube angel 👼
This is honestly still my favorite video. I still can’t thread this thing without watching the video lol.
Same, I always look for this video 😅❤
Thanks a million anytime my serger thread burst I always try to do it by myself but can't I always make a mistake. So I always have to come back to this video and you'll guide me through....what will I do without you thanks a lot 😊
This continues to be my go-to tutorial whenever a thread breaks! Thank you for this very clear and patient support!
Mine too!
Me to
Hi Burley, I bought my surger and delayed using it for about 6 weeks, because I needed to make time to read the manual. After reading partly of how to thread it, I decided to research on youtube and coincidentaly found this video. I was impressed at how easy, straight foward and convenient this video was in showing how to thread this machine. I really appreciate and am thankful for the help. I highly recommend this video by Burley.You're an expert with this machine! Thanks again.
Thank you so much for being so descriptive and zooming in. I can’t stand the videos that are shot from 5 feet away and don’t zoom to show you what to actually do haha
Literally come here EVERY TIME I NEED TO RETHREAD!! amazingly detailed!! Thank you so much !!
ME TOO The best tutorial of them all...!!!
😁Same here! Thank you!
Me tooooo!! Everytime!😂
Same here, every time. thank you
i had mines for a year now n this is best video on how to thread up i have seen.thank you.
This is the best tutorial out there to watch. He mentions all the little steps that will bite you if you don't do them.
Best threading video ever!!!!!! First try Victory!!!!!! Will be watching all his videos!!!!!
I have owned this serger for about 4 years. I've never successfully threaded it myself until today. Your video is the first that made me fully understand how to manage it on my own. Thank you for your exceptional and easy direction. You have uncomplicated it for me.
Best one on here n threaded with no trouble. What should all tensions be set at for normal edging, pls n thanks.
God bless you for this!!!! I haven't touched my serger in years. Been tucked away in the garage. Since I'm home during this pandemic, I decided to pull it out and my brain went into shock, because I couldn't remember how to thread this machine after all these years. I figured I'd follow the diagrams, but then I thought "LOOK FOR A TH-cam INSTRUCTIONAL VIDEO!" And here you are. Thank you!!
I do not know why I can't thread my machine without your video, but I am so grateful for your help. *every time!*
You are a FREAKING saint!! I bought this machine two years ago and never understood how to thread it. Now my work can look finished and professional!!! Ugh! I could Kiss you!!!! 😭
I can’t tell you how many videos I’ve watched to get information on this serger. I’ve been so intimidated by this machine that it’s just been sitting on my table ‘cause I was afraid of breaking the thread it came with. I didn’t know how to thread it and have had a project the kids gave me sitting around for months without touching this thing. You’re video was so clear that I’m finally understanding how to thread it. The diagrams and small parts on the machine made the diagrams less than clear. Your video was awesome. Can’t wait to see what other videos you have on this serger. Thank you so much!
I purchased my serger about 4 months ago and every time I have to thread it I search for this video. Thank you for a great no-nonsense video that gets right down to business!
Bless you! My mom Was about to lose her mind trying to figure out what was going on with her thread. She’s making surgical masks to donate to the hospital and watching your video, she fixed it in five minutes. You rock
Same here - I pulled my serger (that I've never used) out of storage to make masks and could make no sense of the directions that came with the machine. Now I've threaded the machine and successfully sewn with it for the first time! On the make a stack of masks for family and friends!
What issue were you having? I am trying to change out the thread cone for my upper looper and now I'm not getting a chain. Do you need to un-thread all 4 and redo in this order?
Natasha Downing Yes you certainly do!
@@natashadowning2363 if you tie the new thread tightly to the old thread & clip as close to the knot as possible you can then open the tension disc and slowly pull the new thread through the eye without the need to rethread everything. Don't forget to reset the tension when you finish.
@@beccacassidy6 Do you need to stop before knots reach needles?
I was about to cry when my serger came undone during the middle of a work project. YOU SAVED ME HOURS OF ANXIETY! THANK YOU!
Thanks!! I spent an hour trying to get my server to work until I sat down and followed your video.
Fantastic video....I'm now empowered to use this machine instead of staring at it in angst. THANK YOU!
My serger thread broke, which is always tricky to re-thread. I came across your video some time ago, and it's by far the most helpful guide for re-threading my serger. Thank you once again for creating this tutorial!
I had this serger for a year and couldn't figure out how to thread all 4. Thank you. I was able to thread all 4 and it was simple and nobody got hurt (smile) . Thanks again.
Very Straight forward demo . Much better than the printed instructions that came with the machine.Thumbs up Burley Sew.
Every time I have to thread my brother over locker I always come back to you you are amazing :) :)
I just can’t believe it ! I’ve owned one of these over lockers for 4-5 years x never managed to get it working. But after your tutorial..... I’m using it . So so grateful.
Best instructor....Clear and straight to the point.
Thank goodness for this video. I rethread my serger fairly often - especially since I started making kid masks to donate - and sometimes nothing goes right until I find and watch this video again. Much easier to understand than the official Brother instruction video.
Hi pretty lady. How are you doing today?????
Good sir, I have had my machine for months and struggled. So glad I finally found your video!! Thank you!!!
While I was waiting for my serger to come in the mail I started watching videos on how to thread it and your video was the best... When I got my serger I threaded it for the first time while watching your video and I had no problems... thank you for this awesome video
Oh my Lord, thank you! I got my serger as a gift 2 years ago and let it sit there because I was too intimidated to thread it. You made it easy! I only wish I would have found your video sooner!
I’ve had my serger over 20 years and this is the best threading instruction video I’ve seen.
This was the easiest video I have seen. I was pretty upset the dvd that came with it did not explain it as well as you did. Thanks a lot for taking time to teach me step by step. Now I am not so discoursed. And I will be able to sew with ease.
I come back to this tutorial everytime I have a problem with this. Everytime it HELPS me! Thanks soooo much
Thank you so much. My threading has always been a hit and miss thing. Was not happening for me today until I watched your video. Big thumbs up.
Absolute perfection! Clear cut instructions and the close ups are greatly appreciated. Much gratitude!
So happy I followed these clear and concise instructions. Haven't used my machine for a few years and successfully threaded it after the first time. You saved me hours of frustration! Thank you!
OK, seriously? It's THIS easy??? THANK YOU!!!
This the best video I have found after about 5 previous attempts, I didn't notice the last step for the lower looper until this video! Thanks!
Thank you for your easy to see, easy to understand, step by step video. I am no longer intimidated and love my serger.
I have a Huskylock 936 and I have spent ALL DAY trying to thread this machine and can’t get it right. This is the hardest machine to thread ever!! After watching Burly Sew thread the 1034D serger
I see a new Brother 1034D in my future.
Thanks Burly Sew.
Thanks so much!!!!! My wife called me upstairs to rethread her serger............ thank God for you. Superbly explained.
Oh my, finally found my go to threading tutorial. By far the best directions and clear up close video…THANK YOU!
I’ve just got my Brother 1034D today, but ordered it three days ago and have been watching the different youtube videos on it. I have to say Burley Sew is by far my favorite instructor. Not a lot of excess chit chat insignificant things like what they ate recently or why they chose a certain color fabric. I appreciate that. Gets to the good stuff without static.
I totally agree...
I haven't purchased my serger yet but will be soon. All I've heard was how hard they are to thread. After watching this video, I'm not even going to bother with the threading instructions that come in the box. If you can't get it after watching this video, I'm not sure you will. It doesn't get any easier than this folks. Thank you Burley Sew!
Thank you so much for this guide on how to thread the Brother 1034 D serger. I’m a new owner of this machine and you just became my angel for today!
Hi pretty lady. How are you doing today????
This was a total game-changer - your clear visuals finally helped me thread the machine my mom gave me years ago that I was too intimidated by to muddle through. Very glad to have found this channel.
I got my machine today and threaded it first time after watching your Video - thanks !!!!
I owned this machine for over a year and this video is so much better than the their instructions🙏🏾
I will watch this every time I rethread my serger until I can do it in my sleep. I have done it twice and the directions are perfect. I get a perfect chain every time!!!!! Thanks so much for this video!!!!!!!
You are the BEST!!! Your video, unlike many, actually shows the paths of the thread.
Thank you once again. I don’t use it often and when I do, I always refer to this video. Purchased 2nd hand with zero knowledge. Hope to take lessons some day. Have a good day.🌞
I come back to this video every time I need to thread my serger. Concise, easy to follow, great tutorial.
Such a helpful video! Especially since it’s Monday morning as I watch, I love the “regular” language like “slidden” made me smile. Your videos are always my first go to. thank you.
The easiest video there is for threading! thank you so much for sharing your knowledge
BEST VIDEO for threading the Brother 1034. Thank goodness you made this video!!!!!! I use to spend hours threading, rethreading, rethreading.... on and on. I really am not an idiot but somehow I never got it accomplished until I watched this video. Thank you BURLEY SEW!!!!!! It was removing the foot which made a world of difference.
First time to use my machine since I got it as a gift. Sooo happy, with the help of your tutorial, I can use it . Thank you thank you
Just received my new serger today and I am saving this video because threading was very intimidating until I saw this. I know I will refer to it again and again! Thank you!
Thank you so much for this tutorial! I bought an old speedylock 299 serger at a church rummage sale and could not figure out what I was swing wrong! I was finally able to thread it correctly with your help! Thank you. thank you, thank you!
Thank you sooooo much I didn't even know I was doing it wrong. So much more helpful that the manual.
Thank you so much for making a Brother 1034D threading video that was so easy and clear. You took something that looked so complicated and made it easy. Again I can not Thank You enough.
Thank you Burley Sew! Your video was so much better than the instructions that came with the Serger.
Thank YOU! I've been watching everything I can get my hands on and this video shows sooooo clearly where to insert the darn thread! Many thanks!
I don’t a serger....yet. Aaahhh!! Looks intimidating!! Your explanation is very thorough. Thank you!!
Best demo of threading i have seen. Now there is hope i’ll use my serger!
I want to thank you for your guide on rethreading my brother 1034D. It was no problem with your help!!!!
I like the video, I just got my new brother sewing maching Model #1034D Serger I am so happy, I am on my way to making surgical hats and mask,Thank ayou so much.
Best video on threading of this serger. Clear and concise.
I really appreciate the clear visuals and the commentary was lovely and clear.
You are so awesome in teaching us how to thread our serger 1634D, thank you so much.
thank you for doing this video I have tried other tutorials and they stink this is my first serger thank you !!
I thank God for you I had been serging for over 30 yrs and have got a headache when time to rethread , Thank you so very much for making my life simple
Just wanted to say thanks for sharing your talent with others…I am very glad to be able to use my serger again and have saved your video to my favorites…thanks again
YOU just saved me!!!! My order is due this afternoon and I couldn't get it. With your video I'm off and running to the finish line! You ROCK! xoxo
Thank you SOOOO much. I agree with the previous post... have never felt comfortable threading this beast. This is very helpful!
Can’t imagine being restricted to only using a manual! My go-to video for threading. No apology needed for using “sliden” crazy words like that stick in the memory and actually help the info stick better in an older brain like mine! 🙃
used this video years ago when first got machine.... Remembered how good it was and of course used it again and worked straight away
Best threading tutorial I've ever seen for this machine. Thanks!
I am new to using a serger. I was able to follow your video and thread the machine on the first try! Excellent teaching!
I cannot thank you enough for your video on threading. I have the sister model to the 1034d. I have the 1634d which is the exact same machine. Your video explained so much more than the stupid manual. You made it so much easier. Thank you sooooo much.
My go-to instructions after I haven't used the overlocker for a while. Simple and clear instructions, Thankyou
Hi pretty lady. How are you doing today?????
Thanks for the video on how to thread the Brother 1034D surgery. The close ups were very helpful!
Perfect tutorial. Now my serger works perfectly again. THANKS SO MUCH!
I Was dreading learning how to use a serger and the instructional video that came with the machine was horrid. Thank goodness yours was the 1st video i stumbled on. so easy to follow. No on to the next step. Thank you!
Thank you very much! I needed to see the last few steps....taking thread bights to left rear, chain by hand, run machine!
Thank you, thank you!😁👍
Haven't used mine yet but I have welcomed her. This is concise and I will be using this vid as my guide when we have the debut.
My boyfriend bought me this machine and I had no Idea how to thread. I so am impressed with this video! If I don't understand it, I can go back and look again, and do it right. Thank you so much, for helping a beginner on a serger. You made it simple and you took close up pictures. Excellent video!
Thank you so very much for taking the time to help “we” who read instructions but still haven’t the faintest idea what they are trying to say. This was extremely clear!
So much clearer than the DVD that came with the machine. I appreciate the different angles. Thank you!
Jedes Mal, wenn ich meine Brother neu einfädle, ist dieses Video meine Rettung!!!!🙏👍
I work at a library and we have a serger for the community to use. It was de- threaded by a user. I used your helpful video to re- thread our serger. I did so fast i started laughing at how marvelous it worked out. Thank you so much. You are a youtube angel 👼
Best threading video on the internet! Thank you for clear, concise photos and directions!
This is absolutely the BEST tutorial for threading the serger! I come here whenever it’s time to thread my serger. Thanks SO much!
Oh thank you . Just received my machine yesterday and have no idea of how to use it. Will see all your videos.
Oh my godess your video was soooooo helpful thanks a million I tried to follow the serger book guide but couldn't make thanks again
Best video for threading this serger. Say slidden as often as you want. You are my hero.
Best most straight to the point vid I’ve seen of this. Everyone else rambles too much. Thank you
Thank you Burley! Your instruction video is very detail, clear and easy to follow. Two thumb up!
Thank you so much!! I’ve had my server for years and this has to be the easiest tutorial ever 🥰🥰💗💗
"Sliden"...Is an excellent discreptive word. Just got my new lady today. Thanks so much for the video.
This is a lifesaver! It is so much more clear and concise than the direction book! Thank you!
These are THE best instructions-thank you, thank you, thank you!!!