ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Nissan navara d40. Grinding lock noise solved read description please.
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2017
- This is how I solved the grinding noise on my 2007 navara d40. The noise was coming from the front passenger side door. It was quite hard to get the camera down to see the pin. But it is very noticeable once you have removed the 3 bolts and moved the lock. PLEASE ONLY ATTEMPT THIS IF YOU FEEL CONFIDENT ENOUGH TO DO SO OTHERWISE ASK A MECHANIC . I AM NOT RESPONSIBLE FOR MISTAKES MADE. This video is how I solved my problem and might not work for some others. Thanks.
This is a very common door lock problem across the entire Nissan/Renault model range. I think it applies to Infiniti also. This video and others like them are saving people a ton of money at the dealerships. Well done Matt.
Thanks Mark. This video is 4 years old and your still helping people. That works a treat. Oh and a dash of the wife's nail varnish , if you don't have any locktite threadlock. To stop those screws from vibrating loose.
Fantastic!! Took me literally 2 minutes to sort the buzzing lock on my 2007 Pathfinder. You are a life saver 👍👍👍
Thank you.
Thanks Matt! Was just about to take apart the door then I saw your video. 5 min job and no more annoying grinding. All the best, James
Dewd...
I completely disassembled an actuator with the same noise, similar car. I fixed a gear... same noise.
This video gives me one unit of hope. Lol thanks
Can`t thank you enough, you are an absolute gentleman,thanks again.
Nice video dude, ive just finished putting the door back together in my D40 as i had the 'door wont open from inside priblem' sorted that now its making that horrible buzzing noise whem i lock it....guess i best get my screwdrivers back out 😅
Thank you so much, I carried out this procedure on my sons Nissan Micra and it worked a treat saving a lot of money
Thanks again Hugh M
Thanks, did exactly the same on my wifes Micra K12. One very happy wife now
Thanks Matt. thanks for helping out many Navara owners like me to sort out this kind of small issues but would have cost a fortune to replace or repair by a garage.
No problem. I'm glad it helped people out and helped save some money. I've fixed other small annoying problems with the d40 navara like cruise control sensor and 4wd switches and I'm kicking myself that I didn't post videos on them before I sold the jeep. Glad this video helped though 👍
Awesome, my son looked at this and in no time at all its done.
Hi Matt
Worked on 2nd go now works a treat
Thanks
Thanks for the video. Fixed the issue in about two mins. Good work 👍👍👍
Chris glad it worked for you.
Thank you, going to try this on my K12 micra this weekend :)
Just bought Navara with this very issue. Thanks so so much Matt. Took me longer to find screwdrivers.
👍 Glad it helped
Me too but does the torx screwdriver handle come separately?
Thx for this solution! I love you bro!!!
tao822 . No worries man👍😁
Thank you so much, this actually worked
Thank you! Five minute job for me too, thanks for the post.
Richard Hepple . Glad it helped you out.
@@mattworkman8536 omg Matt can i possibky do this same technique on my 2013 nissan rogue???? Drivers door? Very annoying that sound and embarrasing even though the lock still works lol!!!!
@@justinfisher5175 Hi. So I'm not 100% sure if it will because sometimes there can be another problem with the lock then what I described in my video. If you feel confident enough to try it out then do so at least you will know if that little pin has popped out or not and the cause of your noise.
Thanks fixed the annoying noise on my Nissan note in 5 minutes flat 😁
Julie Lormor . Good to hear. Glad it helped👍
Thank you 💐
I'll try mine tomorrow, thank you
Excellent. Hope it all goes to plan.
@@mattworkman8536 darn, mine is a different navara, different mechanism 🙄
What year is your navara if you don't mind me asking?
@@mattworkman8536 07
Thank you
Hi thank you this was great. It worked for one door but not the other.. the pin isn't sticking out so no pin to stick back in.. any ideas ?thank you
That pin is basically the child lock that for some reason they put on all the door's and not just the back one's. And the grinding in some cases is because of the child lock popping out. Most of the time it is front doors that have the problem because there is no physical child lock to switch on and off like the back doors have. If the pin hasn't popped out and your still having a problem with the noise then my guess would be the actuator in the lock. Also the pin only has to be out a millimeter or so for the noise to occur. It could have come out very little and isn't visible. If it's a d40 navara your working on its not hard to remove the door card and get a good look at the lock. Hope this helps ☺️👍
Just to note, this also fixed the same issue with a Renault Clio Mk 3
Which tool did you use to take off the bolts? Need help asap plz
Cy Young. Hi it was a torx or also called a star head screw driver. I can't remember the size. I had a ratchet set and had a few different sizes in the set I just tried until the right one fitted snug in the head of the screw. Hope this helps you out.
Cy Young goo.gl/images/dDBas5
Cy Young if you look at the picture on the link that's what I used
Thank bro much help
T-27
Will this fix the same issue on a 2016 Xtrail?
Im not 100% sure about that. Sometimes there can be another problem with the lock other than what i had in the video. If you feel confident enough to move the lock aside like i done in the video and have a look and see if that little pin has popped out then thats up to yourself. At least you will know if that is the cause of your noise or not.
@@mattworkman8536 can confirm this fix also worked on my 2016 Xtrail. Many thanks for your video !
Hi how did you push the pin back
Hi. I used a long fairly strong screw driver to push it back in. It shouldn't be too hard once the screw driver gets behind it. Cheers Matt.
Legend
Tried but couldnt get the pin pushed, any trick to get it pushed inside?
Hi no real trick really. Just a strong flat head screw driver. If that still doesn't work take off the plastic door card/panel and you can get a bit better access to the lock. If all that fails then remove the lock completely and tap it in. If you go down that route then do something so it doesn't come out again in the future. If it really doesn't want to push back in then there could be something else wrong.
Will this work on a Nissan Versa ?
Ever Try It? My Versa Is Making This Noise Now Smh
This easy fix will last for how long? If anyone has done it thx
It lasted for about 6 months for me. Then the small pin popped out again so I made a very simple bit to stop it from coming out again and lasted until I sold the jeep 4 years later
@@mattworkman8536 ah not bad thanks looks easy enough for me to do the wife will think I'm a genius😂 dealer wants 400$ to fix it. So thanks to this video i will be a hero💪
@@rubensoto7783 yea I was told I needed new actuator. So took jeep into the workshop on the farm and my first try I did strip out the whole door to get at it. Realized what it was causing the noise. Put everything back together then looked to see if there was a easier way to get to it without stripping out everything. That's when I done the video when I seen that the lock could be just pushed out of the way 😂😂🤣.
@@mattworkman8536 good thinking on your part. Keep up the videos they are very good & easy to follow
@@mattworkman8536 great job
2016 xtrail, anyone know if the procedure is the same. There's a part of me that doesn't want to unscrew the lock without knowing incase it falls inside the door and then all the door car has to come off 😂
I had a comment from someone who had a 2016 x trail and they said that it worked OK for them 👍
There is a bracket holding the central locking wiring loom so lock should not fall down. Rubber track from window also prevents this and cable from door handle to lock is short.
@@mattworkman8536 just to return to this... I did it on the Xtrail T32 and it's sorted thank you