Hello, I have two packages of these LED bulbs for my vehicle in my Amazon cart, but I wonder what is the maximum capacity in watts that the electrical wiring of the vehicle can support for a bulb in its front part.
Hello, LED bulb is very power saving, which means their watts requirement is low. Most of the electrical wire on the market will be able to support LED headlamp with no problem
Hi. What h7 headlight bulb is compatible with Isuzu Dmax 2011 model? There is a rubber where the cable pass in the middle. However, the led bulb has a fan that would prevent to fix rubber I guess. Please advise.
Hello, is your car D-MAX I? According to our database, different series might have various bulbs. As for the dust cover problem, we also have some 1:1 versions, which have the same structure as Halogen.
Hi I just tried to fit a set of h1's into my headlights and the stalk on the novsights won't go through the lamp insides it's to thick have you had this issue before
Did u check your car handbook manual. In that its adviced which alphabet number fits your car's headlight unit. I think u need the H7 headlights that fits majority of car models and is very common. So just check your cars hand book and buy the right LED headlight bulb.
Thank you for your question! The halogen lamp does not have a fan, but the temperature of the halogen lamp is about 200° when it is working. Our led car lights temperature is only about 80-120° when it is working. It emits less heat than a halogen lamp, so this one can be used with confidence
Hello! For question 1: After you connect the wire, you should be able to stuff the wire back into the headlight and put back the dust cover easily. For question 2: Yes, it might be a little tricky. But you should have enough room to replace it without removing the headlight. We recommend you prepare a little mirror for the replacement.
Hi, for the H7, there are 2 spots you could check: 1. Please make sure your spring clip is completely shut. 2. If you using the wiring type, please turn the light clockwise until it fully stops. If you still having this problem, please contact us at service@novsights.com
Nice video, guys. Clear explanations. Thank you.
Very nice video..My car has got projector lights (mazda 3 06).. What lamp's you recommended for my car??
Hello, I have two packages of these LED bulbs for my vehicle in my Amazon cart, but I wonder what is the maximum capacity in watts that the electrical wiring of the vehicle can support for a bulb in its front part.
Hello, LED bulb is very power saving, which means their watts requirement is low. Most of the electrical wire on the market will be able to support LED headlamp with no problem
Hi. What h7 headlight bulb is compatible with Isuzu Dmax 2011 model? There is a rubber where the cable pass in the middle. However, the led bulb has a fan that would prevent to fix rubber I guess. Please advise.
Hello, is your car D-MAX I? According to our database, different series might have various bulbs.
As for the dust cover problem, we also have some 1:1 versions, which have the same structure as Halogen.
Hi I just tried to fit a set of h1's into my headlights and the stalk on the novsights won't go through the lamp insides it's to thick have you had this issue before
Hi, please contact us at service@novsights.com.Our assistant will help you through this problem.
Did u check your car handbook manual. In that its adviced which alphabet number fits your car's headlight unit. I think u need the H7 headlights that fits majority of car models and is very common. So just check your cars hand book and buy the right LED headlight bulb.
In Which orientation should the bulb be installed in projector setup. 3-9 or 12-6 orientation??
The LED bulb should be installed so that the flat sides of the bulb containing
the LED elements are facing 3 and 9 o'clock, respectively:)
I'm looking the first LED bulb you showed in this video. It's the fanless one. Does the light not get too hot at 25w with no fan and with dust covers?
Thank you for your question! The halogen lamp does not have a fan, but the temperature of the halogen lamp is about 200° when it is working. Our led car lights temperature is only about 80-120° when it is working. It emits less heat than a halogen lamp, so this one can be used with confidence
Nice video but few things 1 how to reinstall the dust cover , 2 it's easy to work when the headlights are out it another story to work on the car ?
Hello!
For question 1: After you connect the wire, you should be able to stuff the wire back into the headlight and put back the dust cover easily.
For question 2: Yes, it might be a little tricky. But you should have enough room to replace it without removing the headlight. We recommend you prepare a little mirror for the replacement.
It is compatible to Hyundai Starex 1999 model
Glad to hear that
Okay on my Mercedes Benz Glk350 do install them on my low beams or high?.. 😐
Hello! H7 is mainly used for high beams in the reflector; H3 and H1 are usually only used in high beam
What about the rubber whether protection? Trow away or re instal ???
Hi! You need to re-install the rubber dust cover after the installation.
If you reinstall the cover, the fan will be enclosed in the housing. How can heat be dissipated?
Do you know if these would work in a vauxhall astra k with out causing canbus error
I’m sorry we don’t have experience in vauxhall astra, and we can’t give you an accurate answer as to whether a decoder is needed
I have a problem of my novesight led bcos how can i close the cover with the balast?
In order to better solve your problem, please email the details of the problem to our official customer service email: service@novsights.com thanks
I see dark circle spots in the center. Is there something I’m missing?
Hi, may I know which LED light you installing? H1/H3/H7 might have a different reason for having a dark spot.
@@NovsightAutoLighting H7
Hi, for the H7, there are 2 spots you could check:
1. Please make sure your spring clip is completely shut.
2. If you using the wiring type, please turn the light clockwise until it fully stops.
If you still having this problem, please contact us at service@novsights.com
I need h1 led bulb for my golf 4
Hello! May I also have the car year? So I can check the fitment for you
I recently changed from original bulbs to led H3 but my back cover won't fit any recommendations.
Hi, thanks for your question, a modified dust cover can be purchased to use to solve the problem.
Price an how can buy
Thank you for your question, you can have a look on our official website:www.novsights.com/