Fitting a Powerkit68 to the Umarex HDX 68
ฝัง
- เผยแพร่เมื่อ 22 ธ.ค. 2021
- A massive improvement to the Umarex HDX 68, this is the 7.5 joule version and after fitting the powerkit68 is now close to 30 joules.
Get your Powerkit68 here: en.homedefence-24.com/Product...
▶️ If you can help support the channel or just want to follow us on social media, then please click this link for our other sites: linktr.ee/maddogairguns - บันเทิง
What a difference.
Very nice Ben. I'm tempted to get one now, but I wonder if the 16j model could produce a higher velocity when modded??? What do you think? Is it like the HDR50 where the 7.5j has a larger chamber? I might message Florian in the FB group to find out if he's tested both models. Merry Christmas!
@@The_Viking_Highlander Florian assures me that the 7.5 and 16joule version both make the same power when modified.
@@Maddogairguns Ah okay. Thanks Ben
@@Maddogairguns is the 40j fully modded already?
@@coreyrich420 Apparently the 40joule can be modded also.
This channel is super under rated. Really appreciate all the upgrade tutorials and how well you narrate and demonstrate the process.
Seeing and hearing your comment at 4:10 compels me to say: thank you for your service. Glad to see someone with the courage to take apart his (here in the U.S.) $300 shotgun, for all the world to witness no less.
Thank you for being the brave man to take this apart and make it easier for all of us! I've got the schematics from Umarex on the 16 and 40 j versions and the insides are different. I was going to try buy the different components from them to change it but i think I'll go this route instead as long as I can get 15 shots out of 2 co2 cartridges.
I wanna do the conversion and also convert over to the 88grm Co2 Carts as I don't like them little 12 gram carts.
Been wanting to add this to the collection for a couple of years now. Happy to say I finally was able to order one this morning along with the power kit for less than $300
I was really surprised, that valve made one heck of a big difference. I have to give you a lot of credit getting that thing back together again
Plus removing the restrictions, yes there were a lot of screws. And I took it apart in the wrong order, but now I’ve done it, it should be quite easy.
@@Maddogairguns Hey man, I've been using the red rap4e reusable first strike rounds and I've noticed that the raised lines (presumably to add some spin on exit) are leaving small dents on the inside of the breach where the ammo is seated. Is this a problem? Should I stop using them? Cheers
So its illegal 🚫 now? Why not just buy the high powerd version if its legal.
@@ablockley4183 Lol did ya break your gun yet?
Merci trop top 👍
Et joyeux Noël 🎄
Brilliant 👌🏼 Merry Christmas to you Mad Dog 🥳
I have been watching this gun for a while now....and finally comitted to buy it. It sells out as soon as it hits the shelves, so I got lucky. I did all the mods as soon as it arrived and it was quite straightforward as long as you pay attention and take your time. I used a magnetic bowl to collect all the screws and bits, but still managed to lose one of the tiny machine screws. I found a fitting one in my screw tin so I was back in business.
Well, after the mods I loaded it up and gave it a test fire with regular rubber balls on a cinder block from about 12 yards....and wow!!!...it blew a hole into it. I kept shooting at various targets and was having fun when after about 25 shots I started to notice a drop in performance. So, reload and repeat to the same results. Yes, I was shooting indoors at room temperature.
I recommend this mod for people looking for sheer power but not for fun shooting for it eats through the CO2 like crazy...just be well stocked in cartrdges. Someone suggested to put the little brass "tophat" back in for it apparently regulates the CO2 much better but to a slight loss in velocity.
I really wish this gun was available as PCP so that you could just pump the tank and keep shooting. I have other PCP guns and I can consistantly get more than 100 shots from a single tank filling. I also feel that the gun is much to long and heavy...a more compact version that weighs around 2 Kilos would be great. Don't get me wrong for it is a blast to shoot and it obliterates targets....just be prepared to spend money on CO2. By the way, dremeling the notches out of the chamber does absolutely nothing....I would rather keep them in order to reverse build and sell legally on the market.
At this point I need to make a downward correction to the amount of shots fired with the mods....realistacally it is maximum 14-15 rounds per CO2 change....I am not happy at all. I will try the brass tophat replacement tomorrow and see how that goes. If not, then I will have a friend in the pressure tank industry make a tank with regulator to which I have a coupeling to match that. Then laser print a fitting stock for it...
@Torben Engelhardt No not yet, I am waiting for more CO2 to arrive. You can do the mods, but leave to brass piece in for now...seems people get more consistant performance that way. I will post more when the CO2 arrives.
@@dirklatham1045 Good write up. Did the brass tophat help in regard to shots-per-c02? I guess 15 shots isn't the worst considering 30 joules..
@@owenporter1472 I actually never changed it back again....I ordered 250 CO-2 capsules and have been blasting away. I am trying different ammo though. I recently tried the ceramic d...h balls( I cannont spell the word because they are sensitive to it). Pfffffff! and damn! These things went completely through my home-made target box which consisted of several layerys of thick cardboard and two layers of thick hard foam. AND they shattered on the tile wall behind it to send about 100 pieces of shrapnel back at me! I will never shoot these indoors again! I am thinking about steel balls next. Anyhoo, I developed a leak in the system so I have to take it apart again to replace o-rings. Luckily these are easily available fairly cheap in local hardware stores....welcome to high pressure airgunning!
Adendum....if you shoot the rubber balls, then you know that they are difficult to load. Just put them in a zip-lock bag and spray them with some Ballistol or good silicon spray...and knead the bunch!
Thanks a lot for the really helpful video!
Nice quick n easy mod thanks 👍🏻
After 3 hrs its back together. And yes what a difference. As soon as you take thd first shot it's got a bit more bark and a hell of lot more power.but the screws Jesus.thanks for the clip and thanks to paracetamol and tea.
Nice video Ben. It sure has some power now. Merry Christmas 😃
Yes, you can see the balls fly true and straight now, before you could see them dropping off. Merry Christmas 🎅
AWESOME VIDEO BRO !!!
I was really surprised, that valve made a really big difference.
💪Merry Christmas and New Year
Same to you 🎅🎄🍻
This work destroy my brain 😂, very good entertainment, ty.
Great video
Thank you so much man
After disassembling the HDX and being ready to swap out the original unit with the powerkit68, I found that Umarex had literally glued the original in throughout the threading! Even after thoroughly heating it, it wouldn't budge. Ultimately, I had to resort to drilling the original and using a screw extractor to remove it. It worked, but I was sweating like a sinner in church the entire time! Getting it back together was a bit of a challenge, but it's working great now, and a huge improvement in power! Thanks for the video! It really helped!
Have to walk the dogs, but at 17:20 gotta say DEM JOULES, HOLY CHINGAMOLES! That's now a substantial bit of kit. (One should expect no less from such an awesome looking beast.)
There is loctite on the threads of the part you need to get out. Without heat it WILL break and it WILL be hell to get it out.
On my HDR, I used a small soldering torch for 5-10 seconds. That melts the loctite fast and makes it easy to take the part out.
As I said in the video, heat it up and it comes straight out. Never had a problem with changing the pin, on my HDR and HDS and now HDX.
@@Maddogairguns I know you know what you are doing, but made a comment to others that might not know that there is loctite on that part and that's why you need to heat it up.
Great video, mate!
No offence taken. So many people seem to mess up that part.
@@Maddogairguns Not an easy task to get that piece out if it breaks off.
Not too long ago a guy in the fb forum broke his and had to drill it out.
Don't think he got the hdr to work after that, not sure.
Thanks! If you start with a 16j. you dont have to unscrew the cap with the 2 holes to take out the black filler. it's already empty. Cheers
thanks for info
Apparently the 16j air chamber has thicker metal walls though, so it’s more powerful to take a 7.5j air chamber and remove the black plastic restrictor than it is to take a stock 16j air chamber.
Really good gun
I just want to say I'm probably the biggest fan you have here in the United States I watch a lot of channels from you guys in France but you're the only one I can actually understand I see they have a lot of front firing blank guns there with the ball attachments we have those guns here also the front firing blank guns but I cannot find the ball attachments with a teargas around anywhere they used to sell them everywhere when I was a kid I'm 38 years old now for some reason they was taken away a long time ago and then they got brought back but I can't find the gas rounds or the Bullet a judgment anywhere we are allowed to have them but nobody Imports that stuff because there's no market for it here people would rather go and buy regular bullet shooting guns but I on the other hand love the front firing blank guns and have a whole collection they sell fully automatic front firing blank guns in the United States I don't know if they do there or not they are a whole lot of fun I don't know if it's in when your upcoming videos but could you use the ball attachment in a video with the chronograph I'm really curious to see how many jewels that puts out well anyway I hope you and The Hobbit and we can't forget the dogs LOL have a very merry Christmas and a happy healthy safe New Year
Job well done bud. I would got it in bits put them all in a box and shoved them in a cupboard lol. But end result well worth your time. Can’t wait to see you dent some stuff.
Hoping to get it outside, just after Christmas. Got some bits to destroy.
@@Maddogairguns Have a good Xmas👍
good job
Wow doesn't look like a cake to me I'm getting mine already set to 40j
Grande video come sempre 😊😊... Anch'io con il mio HDR 50 umarex sono passato da 7.5 a 11 joule efettivi ela differenza è veramente notevole in potenza e spunto d impatto!!😮😮
Bravo 👏
At 13 min 40 sec the small part that you hold in your hand... should it be removed definitively for unclamping??
I have a 40 Joule HDX on the way and I'm excited to see how well it fires and handles various targets. As much as I love my Byrna for daily carry, I want something a little more powerful for home defense and this HDX fits the bill nicely. I'm pretty sure Chemical rounds are out of the question with it thought LoL.
Where can I order a 40 joules HDX?
If you're in US Umarex said they won't be shipping 40j there, so how did you get one?
@@JimmyIronballs less-lethaldefense sells them
Less-lethal seems like a good option. I would advise a against defenseinnovations. I had a pre order since June of last year, and they just repeatedly push it out. I ended up just having them send the normal version with the valve pin kit and did the install myself. Nobody knows when or if umarex will sell the 40j in the USA, and defense innovations is just guessing because they don't do the upgrade themselves. It took me around 3 hours. Having done it I feel it could be done again pretty easily in under an hour. Reassembly is tedious.
Man, I was really excited about this modification..
Christ it looks fiddiley. I'm never gonna get that thing back together!! Looking back, any pro tips for a beginner??
If you buy 40J version, you can get an adapter for two Co2-capsules. It is then ~24J version with quick piercing mechanism.
Just what I saw on youtube and was told by someone about the 40J version,its not getting over 40 joule,not reaches even 40J.I heard its the same inside all 3 models,just because of the 88g it makes a few joules more than the open one from the video here.Feel somehow screwed by Umarex waiting a year and then hear stuff like that,disappointing.
@@sven471111 really? If so, that’s bad… Is it even 30J?
@@pastori70 The maximum I saw here on youtube from that french guy(naturabuy or so is the channel's name).He also has a tab with the joulenumbers on his site with different ammo.Just one ammo comes in medium to 39J,the other ammos fall down also to 33-36 if I remember right.The gun looks really nice,but I expected more from it.Maybe we see more tests when Umarex finally delivers in another year or two,but I dont wait much more from it.But for real defense are meanwhile stronger options available.Maybe someone invents some more tuning for the HDX,like another barrel or so.
@@sven471111 i have the schematics from umarex, the 7.5 and 16 have completely different innards to the 40. Was hoping I could mod to 40 but not so.
@@jamesblack9019 I could do with a copy of the schematics!
The HDX kit is sold out but after looking at the HDS kit it seems to be the same kit, do you think it would fit the same since its basically the same system
OK now I have my plan. Find someone who knows how to do this and ask them to do it. I would end up sitting on the ground in tears surrounded by parts if I tried this myself. I've changed the timing belt on a Chevy Vega using less tools.
You don't need I sell way better products here in South Africa we don't play with what's effective
Dude it wouldn't be that hard if this clown would tell you exactly how many screws there are and keep a count of them and also tell you a little bit of something that makes a huge difference and that underneath where they have that storage compartment for the loading mechanism to help load you have a screw that is got to come out in order for it to split in half he says nothing about it and also it's not a Philips it's not a a straight screwdriver it's a really strange bolt that is not a hex head or anything
Hi Ben,
So, if I fitted the 88g Housing adapter to use the 88g Co2 is it worth fitting the power kit as well?
Just seems a lot more messing around if it doesn’t make much difference in power.
Hi my friend, just bought the valve kit and the adapter for 88g, but please, let me ask you if the little gold restriction in 13:56 i should to remove it or i have to put it back on. Thank you for your precious answer.
Más digo,yo compré una de 16 julios,me llega esta semana.Crees que es suficiente para defensa en casa con esos 16 julios? Gracias!
Hi Ben, Chris here from across the pond in the USA, been drooling over these for a HDX 68 for a bit now and watching your videos and other videos on these air rifles. So in your honest opinion if you are really looking for stopping power for an intruder is it worth grabbing one of the 11 joules versions that are in the USA and do the following. The power kit and then do the mod with adapter for the 88grm Co2 cartridge or wait and hope that the 40 joule version actually shows up here in the States next November? I myself hate waiting and preordering and paying for something that far off as I have gotten stiffed more times than care to mention. I am fairly competent at doing this work as I used to own an Airsoft business and did all the repairs and upgrades. Thank in advance.
I modded my 7.5 joule version and it now makes about 40 joules. There are other mods you can do, check out this company that make adapters for HPA and 88g CO2: www.criticalsituations.co.uk/
Thanks Ben! Stick a HPA tank on it and show us if it improves the joules and consistency!
That’s what I’m trying next.
@@Maddogairguns looking forward to the update!! 👍
@@Maddogairguns Hi Ben,
Do you know if it’s possible to fit a 88g Co2 to the HDX? or even a HPA tank?
@@tonyross4365 I have the HPA kit from homedefence-24, which I am going to try. Someone with good machining skills might be able work a thread, for fitting a hpa tank, don't think I will tackle it though.
@@Maddogairguns have you a link for the HPA kit? I can’t see it on Florian’s website?
Can you do this upgrade to the 16joule version. I presume it’s the same apart from removing the plastic restricter? Thanks
is it worth it to put this mode to the 40 J version ,and what is the expected joule increase ?
If you were to only remove the restrictions, what would the power be?
Hello I am French and I tried your method for unclamping but it turns out that in the end the part is not machined in the same way as your hdx 68 (see 14 minutes in your video) suddenly could not go to the end... Perhaps it is not exactly the same as your country? Then I reassembled the weapon but I can no longer bring the slide back wide for loading... It remains blocked... Is there something special to do during reassembly so that the loading takes place? normally ? Thanks for your help !
I'm in France and bought it here, you likely have the 16joule version. I have not seen the inside of those.
Does this shoot just as hard as the 40 J version that is set to come off the shelves? Trying to decide if i wanna get the 7 J and do this or just pre order and get the 40 J whenever they’re available to ship again
Hello, what did you do with the restriction brass part? Did you delete it?
88gr co2 should give a little more power too because the co2 dont have to fill up the hole black pipe so less preassure loss i guess. But you have to saw off the pipe
Absolutely struggling to get the old power kit out, to replace it at the moment. Other than that this videos been great! I believe since mine is the 11 J version that with my power kit tuning it’ll get up to 30-40 joules. That’s the hope at least lol
Hi,
I have a question about the part you have to heat up.
Is it made of plastic?
You say that you just put it on a hob. Do you put something between? Sorry the question is naivve mayvbe but i hesitate to add the powerkit so i want to be sure on how to proceed.
Thanks
The piece I heat up is some kind of alloy/metal, definitely not plastic.
Yikes, thats a complicated one! Amazing difference tho.
Yes, you definitely want to do your "French Locale Upgrade" to this (7 joules renders this suitable only for paintball games). As for me, I just paid $350 to pre-order the 40 joule version. Yee haw . . .
All three power versions are €500 here in France, so a fairly expensive. I now have my Cat C license, but can't justify buying another at 40joules. 30 joules is still pretty good.
Hi thanks for video, i break the kit into the valve do you know where i can buy a new valve
Dog !. That was brill. Im a Tradesman and would have needed a separate (schematic) table for all the bits. Im betting you were a London Cab driver, with the massive "Hippocampus" brain bit.
No, not a cabbie. But I did used to drive a recovery truck all over 🇬🇧
Im searching everywhere for a install guide for the powerkit68 for HDB68 but i can't find :( someone help pls
Hi man, good job. How many shoot before and after the mod ? Thanks
hello, thank you for this video, with this modification, do we still keep a good shooting power on the 16 possible?
16 joule and 7.5 joule versions should make about the same power when modified.
where can I buy the 40j version ship to germany? Many shops dont ship to germany...
I misspoke, I'm talking about the 16 possible shots of the rifle. With the modification the 16 shots are around 30 joules, or for example after the 10 th shots, we drop to 20 joules or less?, you understand better what I ask? because in the video you show the power, but just on the first 5 shots. thank you.
I'll be doing another video, shooting on my Range, when the weather gets better. Will see how much it drops off then.
@@Maddogairguns thanks you
3:40 that orange bit looks like an intestinal body part.
Hi. Es gibt auch für die 7,5 Joule Version den Ventilblock mit 88 g Anschluss. Wenn man den mit tauschst und das Ventil wechselst kommt man auf 40 Joule?
Hi,
Meine Frage ist welche Konfiguration ich benötige um die maximale Leistung für die Hdx 68 zu bekommen?
Verwenden will ich fortan immer eine 88g Co2 kartusche.
Gruß
Do you put the little restrictor pin back in the tube that goes into the chamber or do you let it out?
No, the little brass top hat piece comes out and stays out, mine fell out. On the hds I had to pull it out. Just make sure the seals are still in place.
Ola!! Been a couple of months now. Curious as to whether you have noticed any reliability issues since doing the mods? Dumping gas, miss-fires etc? Inconsistent velocities maybe? Or sweet as a nut?
After doing these mods, I had it dump a lot of gas on the first shot. Quickly reloaded the next round and it stopped. Not had that problem since, so think it might have got a bit stuck inside. Seems to be going ok other than that first shot.
@@Maddogairguns Ah right, so the first shot is very high powered? Thanks for the reply!! Love the vids 😎👍
are all them screws same size for the most part ? D*mn
can we boost 40j version? I thinking about external gas bomb with regulator or something :)
Is it possible to upgrade the 40joule version to get more power? Without switching to a HPA system? Is there a valve block or a restrictor you can tamper with?
BR
I have no experience with the 40 joule version, and they don't seem to work well with HPA, due to the size of the brass tube/port.
Nice. I want to know if it's possible to fit an 88g Co2 cartridge instead of the 2 12g Co2 cartridges by removing the black tube at the back of the gun? It would be nice to know if the thread is already there for the 88g.
No, don't think the thread is there. The black tube goes further into the gun and joins up with the CO2 chamber.
Do you think umarex will send us the 88g valve housing as spare part?
My HDX energy was 9.2J by the way.
Same chrony same Rubberballs.
You could cut it down and glue a threaded Insert for the 88g capsule in the housing.
Absolutely awesome... been waiting for a mod vid of this gun for months... would I be right in thinking that the 16 joule version with the mod would kick out even more power or is it better to mod up the 7.5 only
I've been told that the 7.5 & 16 joule version, both make the same power when modded. The gun is too expensive for me to try, so I'll take their word for it.
Yes expensive indeed!
I have a question the HDR 50 cal revolver 11 joules do you now that the fpt is without any more?
How any shots do you get per fill with these mods?
Hey, can you do a tuning tutorial for the Umarex Tm4 ris t4e .43 cal. ?
that's all very nice and everything but how much rounds you get out of this thing with just two 12g cartridges. 10?
not worth it. if i want that much power i'd get the "official" 40joule version with 88g cartridge.
Thank you...
This is going into my Umarex folder, for when I hop up my pre-ordered 40 joule version. My brain is salivating at the thought of upgrading the power to what . . . 60 joules?😁 If that's doable I suspect that's when I will appreciate that the gun uses 88 gram Co2 cartridges.
Lol yea I don't think it works that way bud.
Me and maybe subscribers are not getting updates mate. Had to look for this.
I’ve not released it to the public yet, it’s set to unlisted. Will set it to public tomorrow.
Can it use Z-Ram Slugs or First Strike ammo?
Hi,what type of sparclettes do you use?
2x 12gr OR 1x 88gr after the modification ?
Only 2x12 will fit in the 7.5 and 16 joule version (or so I'm told) the 88g fits in the 40 joule, so I use 2x12.
Hi @Maddogairguns ! Do you think its lifespan will be shortened because of the modification?
I wouldn't have thought so. Umarex ship a 40 joule version, and I believe the powerkit has been reverse engineered from the 40 joule version.
I read somewhere that the only difference between the 40 joule and 16 joule versions (those are the two power levels that will be sold here in the U.S.) is that the 40 joule version has the mechanicals for the 88 gram Co2 cartridge. Otherwise, the mechanicals are the same. If that proves accurate, I'm going to be real curious to see what happens on installing the power kit on the 40 joule shotgun.
Hmm. . . safe to assume the relevant parts are engineered to handle what, 60+ joules?
I think Florian at Homedefence-24 has had a play about with the 40joule version. He said there were some gains to be had, but as most people seem to be happy with 40joules, they don't seem to be modding them.
@@Maddogairguns Yes, that makes total sense. They are a business, have to go where the demand is. At 40 joules I would NOT take apart the beast only to squeak a few more joules.
Nice vid 👍 thinking of getting this one and the power kit for it… i do have a question about my HDR 50 that I have fitted the power kit to, when I hit the stock to prime the gas it fires by itself… any idea what is causing this so I can fix it ? any help will be much appreciated
Did you get all the springs back in. It shouldn't fire off when you prime the CO2, but without seeing it, it would be hard to diagnose.
90% the little spring is the mistake
HI guys, Just A quick one, just about to convert my HDX .68 with the PowerKIt up to 40 Joules, I live in the UK, where do I stand on Legal grounds as the info I have researched says that the legal limit here is 16?
Kind Regards JP.
The HDX68, in the UK is classed as an air rifle, due to the length of the barrel. So that is the reason the 16joule version is available. Legal limit in the UK for air rifles is 12ft lb, so any mods you do to a 16joule version will put you outside the law.
Hi. When gas my is pierced, I seem to leak gas at the pop up pin. Any advice as to why?
Sounds like the seal needs changing.
Wish you had shot all 16 rounds so we could see if there was a pressure drop near the end or not. Not much need to mod the gun if after a few shots the c02 drops and reduces the joules
That in fact is much more powerfull than you mentioned. Your comparative test is not consistent. You should have tested it with the same type of amo, before and after.
12:25 I am with you 🤌
WE THE PEOPLE
Test with 88g tube.
That can give some better performance.
Also you mentioned removing a restricter before fitting the mod, what kind of power increase do you get from just removing the restricter
Sorry, I don’t know. I just did all the mods at the same time, didn’t want to keep opening the gun up.
@@Maddogairguns cheers can't wait to mod mine 😄 how many shots do you get per co2 cartridge once mod is done, and do you know if there's a way to convert to the 88g cartridge
I suspect that would be the difference between the 7.5j and the 16j but I'm no expert
Excellent video - technically speaking what’s the difference between the 16 and 40j version ?
Not sure, I’ve only taken the 7.5joule version apart. I think homedefence-24 has done all versions.
With out a license about 18 months inside.
Just watched this gun shooting 68 joule..=..OUCH!
Is this available in the uk in the 16joule version? Or do we only get the 7.5?
I would think that you could only get the 7.5joule version in the UK.
Hi mate - question can we us3 HPA tank with the HDX 68 i was thinking stripping down the co2 section in 5he stock and replacing with an adapter?
The CO2 tube goes right into the gun itself, at least on the 7.5 and 16joule version. You might be able to tap a thread onto the tube to accept an adapter, but that is beyond my capabilities with the tools I have here.
@@Maddogairguns yeah i was thinking the same thing, mite see if i can find a spare to try it on, thanks for the reply, ps give the valkin m17 a2 (tipmanns) a play, really easy to tune and bags of fun 😊 you will love it!!
Using a dremel optianal ?
13:48 Comes the little piece back or stay out at the back construction?
Take the piece out and leave it out.
Al punto 13.50 la piccola parte non si deve più rimontare?
Salut mec, il est vraiment compliqué à modifier comparé au hdr ou au hds faut pas se louper à l'ouverture et au remontage j'hésite de me fournir le kit et de le faire.
oui il y a pas mal de morceaux sur le hdx 68, les hdr 50 et hdp 50 sont bien plus simple
Wou;d this fit the hub.68?
There's no way I could to this. I'll probably end up with about 50 spare screws after re-assemble :D
I think I had two screws left over, and could not find where they came from.
I'll probably end up with 10 more 😬
the difference between the gold and red upgrade kit? and which version did you edit? the 16 joule or 7.5 one?
Mine was the 7.5joule version, and I don't think there us any difference with the colours.
Wow , ok thank you , I have the 16 j version I think with the powerkit I can go easilly to 40 j I hope
have you tried just leaving that piece out completely to see what happens???
You could try that, I just wanted to do it all, while I had it apart.
I also wanted to add to the post I just put I'm going to be starting my own channel sometime soon I'm not quite sure as to exactly when with my work schedule and everything I just wanted to be able to show you the kind of stuff we have here in the United States we can have front firing blank guns depending on where you live just like our airguns it all depends on where you live most of the US you could have any type of Eragon you want with no regulations I just unfortunately happen to live in the state code New Jersey where the gun laws are absolutely the toughest out of anywhere in the United States but most of the states are guns Black Powder guns and front firing blank guns or not regulated most of the States you don't need a background check or permit or nothing like that to get those now modern guns that take metallic cartridges or shotgun shells you have to get a background check or permit depending on where you live the state I live in I can get the front firing blank guns paintball gun / hdr50 which we have to put the levenswiel valve in ourselves if you want to have it like that but anything else in this state that I live in you have to have a permit for so with that being said where I live at is pretty much like the laws where you live at except yours are actually a little more relaxed than the state I live in and needless to say my wife and I are moving hopefully in the summertime
I CAN BUY THE 12 JOULE FOR 312 DOLLARS OR THE 32 JOULE VERSION FOR 314 , WITH THIS YOU PAY 289 FOR 7.5 VJOULE VERSION PLUS THE POWERKIT 50 BUCKS ,PLUS ALL THE TIME ????WHATS YOUR THOUGHT ON IT MAD DOGGG ???
If you have checked out some of my videos you will see that I am now getting 38-40 joules from the modified 7.5joule version of this gun, using the right ammo makes a huge difference. It's up to you what you go for, but there are a lot of screws and bits to remove, take plenty of pictures when disassembling.