Freecad tips and tricks (#2): importing/editing .SVG files

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ก.ย. 2024

ความคิดเห็น • 26

  • @kevinkidderphotographer
    @kevinkidderphotographer 3 ปีที่แล้ว +3

    Thank you for this!
    Coming from the Adobe side of design, I am sure that the majority of my creative work for 3D printing and CNC will start in Illustrator. This definitely helps bridge the gap between the two programs until I am more comfortable

  • @cw4608
    @cw4608 3 ปีที่แล้ว +2

    Please do more videos on Freecad. You have a good way of explaining things and you are easy to follow. Yes, there are a lot of freecad tutorial videos out there, but they aren’t all good.

  • @rklauco
    @rklauco ปีที่แล้ว +1

    Thanks, quite simple, but helped a LOT.

  • @NewStreamLine
    @NewStreamLine 3 หลายเดือนก่อน

    Short & informative. Thx very much for the video.

  • @eskibrew
    @eskibrew 4 ปีที่แล้ว

    I hadn't seen the Merge Sketches option before, thanks for the tips.

  • @MuthuKumar-qi2um
    @MuthuKumar-qi2um 4 ปีที่แล้ว +1

    You explain pretty well , keep em coming!

  • @brucewilliams6292
    @brucewilliams6292 4 ปีที่แล้ว +1

    Thanks for the great explanation! Happy Holidays

  • @andreassa2656
    @andreassa2656 4 ปีที่แล้ว

    Exactly what I was looking for. Thank you

  • @guillaumeservant3324
    @guillaumeservant3324 4 ปีที่แล้ว

    Thanks. You save my life !!!

  • @chepecarlo
    @chepecarlo 4 ปีที่แล้ว +1

    Gracias lo explica muy bien :)

  • @wantafastz28
    @wantafastz28 2 ปีที่แล้ว

    Thank you for this.

  • @belaphi53
    @belaphi53 4 ปีที่แล้ว

    Thanks for your video. Can you do a tutorial about Path Workbench?

  • @stefankrimbacher7917
    @stefankrimbacher7917 ปีที่แล้ว

    Thanks a lot.

  • @easttnrickmc
    @easttnrickmc 2 ปีที่แล้ว

    When I import it comes in as paths not bodies and I can't select multiple? How can i?

  • @tomws6336
    @tomws6336 3 ปีที่แล้ว

    This was very useful, but I had to rewind a couple of times after you transitioned to the second part. You moved into it without any warning and reused the imported svg drawings rather than using the sketch that you created in the first part. A more definitive transition would be less confusing.

  • @jmemusic
    @jmemusic ปีที่แล้ว

    3:15 -> I don't quite follow your tutorial. First you grouped everything into a sketch, but now you have again the three separated bodies. It is confusing

  • @TheRainHarvester
    @TheRainHarvester 3 ปีที่แล้ว

    How could I select all the points on the cuff and them move them at once (away from the hand)?

    • @TabletopRobotics
      @TabletopRobotics  3 ปีที่แล้ว +1

      Go the the sketch workbench and open the sketch. Next go to the corner of the cuff and while holding the left mouse button drag the selection square over the entire cuff. next in the toolbar select sketch, then sketcher tools, then move of just (ctr+M). After that just select where you want the new position to be. Hope this helps :)

    • @TheRainHarvester
      @TheRainHarvester 3 ปีที่แล้ว

      @@TabletopRobotics Thanks!!! Any way to specify offset (only gives angle/offset from a random vertex).
      Any way to rotate it?

    • @TabletopRobotics
      @TabletopRobotics  3 ปีที่แล้ว

      To make the offset use construction lines and constrain the line to a specific angle and distance. To my knowledge there is no way to rotate geometries within a sketch.

    • @TheRainHarvester
      @TheRainHarvester 3 ปีที่แล้ว

      @@TabletopRobotics is there some workaround in another work bench to do rotations? I tried in draft with "convert bidirectionality between draft and sketch" but geometry gets shifted for unknown amounts when I do that.
      Thanks for your knowledge!!

    • @TabletopRobotics
      @TabletopRobotics  3 ปีที่แล้ว

      Honestly the way your doing it with "convert bidirectionality between draft and sketch" is the way i would do it. I don't know why some geometry gets shifted, but the one thing you could try is to constrain a point of the geometries you don't want to move with a reference like (0,0).

  • @emanuelalejandro5644
    @emanuelalejandro5644 ปีที่แล้ว

    todos los comentarios en ingles

  • @Kizigira
    @Kizigira 26 วันที่ผ่านมา

    You skipped some important details making it not helpful.

  • @denismoran670
    @denismoran670 3 ปีที่แล้ว

    Important- make sure to use an obscure type of file, and don't explain how to get it from a jpeg,etc. Oh, sorry, you've already done that!