exLED Parking + Brake + Turn signal Control Module for 1 Color LED setup
ฝัง
- เผยแพร่เมื่อ 17 ก.ย. 2014
- www.exledusa.com/parking-light...
With this module you can control your led strip to as parking light, brake light and turn signal. Connect the module to the vehicle stock wire harness as follow:
Input Wires:
White: Parking +
Red: Brake +
Yellow: Turn Signal +
Black: Ground -
Output:
Red: +
Black: - - ยานยนต์และพาหนะ
![[LIVE] : ONE ลุมพินี 69 | คู่เอก "กุหลาบดำ vs นาบิล"](http://i.ytimg.com/vi/PNM6U8e_HMo/mqdefault.jpg)
Nice
@ Jorge Yellow is turn signal White is parking and black is ground. Also check you account setting and make sure you get your privacy so that anyone can comment on your posts. This way I can reply to your questions directly and you will be notified that people outside your circle have replied to your questions on youtube.
@Jorge it has 3 wires on both side? not one side with white yellow black and the other side yellow and black? If you got the one with both 3 wires on each side then use this diagram on this page: www.exledusa.com/exled-2color-2way-turn-position-lamp-control-module-tpc-v.2.html
Ok so you you only have a yellow wire for one signal light on either side ? So what happen to the green turn signal on the other side ?
They are single 3w lights. How many on a module?
I want to use this up front to add another amber LED strip to my Tahoe. I should be able to just ignore the red wire (tie out the way?)
Yes, you can just ignore the red wire. I would cut the tip off and wrap it in electrical tape. You can purchase it here: corsomotion.com/collections/control-modules/products/led-reflector-control-module-modules-pair
hello can i get this on ebay...? i would like to have one for my power wheels car.
So does this module work and a standard LED strip or a specific kind? Thanx
hi dear I have a 2016 Kia Rio R sedan and I want to change my regular head light for LED also my tail lights to,let me know how much
I don't sell lights.
Hello,...where can i obtain one of these
i have 2011 camry LED taillight so where do i tap out put wires because i have park/brake signal harness that plugs into taillight so where would i put black and red wire? to the brakelight +/-?
Keye T From the ExLED module to Camry: RED wire (ex) to Blue wire (camry) next: white wire (ex) to brown wire (camry) next: yellow wire (ex) to Green wire (right side camry) or Yellow wire (left side camry) next: black wire (ex) to white/black wire (camry)
DIY: Car Modz thanks ,, i will buy it,, because i tried this mod by tapping signal to the led and it worked but CANCELLED my dim tail/parkingl light
+DIY: Car Modz hey I actually bought the module and you showed me where to put the input wires but where do I put the red and black output wires?
+DIY: Car Modz i assume the wires you just listed are where i interupt for the input, but for the RED/BLACK output wire on the module(this 1 which i bought from you) what do i connect those to since my car has 4 wires??? and the mod only has 2 on the output side
the 4 wires on the control module connects to the stock wire harness. the out put wires are hooked up to the separate leds your adding. Not replacing your stock bulb with stock led bulbs.
So the control box: can I hook one control box up to a string of LED lights and all will perform this way? You just bought a strand of LEDs am I correct?
Yes, I believe each box will work with any led that are less than 3W. The control box has 4 input and 2 output . The 2 output wires gets hooked up to the 2 wires on the led strip.
+DIY: Car Modz great video and demo it was very helpful I had a quick question when you purchase this control module do you have to purchase two separate orders of them or do they sell the pair together?
jmagallon1111 sold in pairs
Those pics are an example of led brake lights? I am asking how do you install them?
MaSSaCr3Vu Same way you replace the reverse light bulbs: th-cam.com/video/odRepjW8o_o/w-d-xo.htmlm25s .Instead of replacing the reverse lights you replace the brake light bulb. Refer to your owners manual.. page 479
Bought these and the parking feature stopped working that same night and a week later the brake lights stopped working as well and customer service was of no help and lied about sending a new one.
I've used over 80 of these... zero failure.
How do we get LEDs for our braking lights on the coupe?
MaSSaCr3Vu www.driveaccord.net/forums/showpost.php?p=2186170&postcount=15
I bought these control modules to do the reflector mod on the accord but I don't even know what I should connect the black wire to. Does this even have the brake feature?
hello,...can this also work on power wheels ride ons
+Cadillac Escalade Yes, this will work with any 12+ battery, you will just have to hook it up to a flasher relay. You can purchase this www.exledusa.com/parking-lights-turn-signal-control-module-for-1-color-led-setup-pair.html
Alrite, great an yaw do have these in stock..?
+Cadillac Escalade I don't know if they have these in stock. I'm not affiliated with the company. I purchased one and did a product review on it.
tried to contact you months ago through your email in your website but no reply.. i was asking about shipping
I am not EXLEDUSA. I made this video as a customer that purchased their product. You might get better service by contacting exledshop.com
Quiero luces para toyota Lanús Cruise año 96
i just ordered these and when i got them in the mail it has three wires on each side a yellow, white and black. There is no red wire. Did I receive the wrong ones or can i still use these for the brake light?
how many module would i need per led light?
1 per led strip.
+DIY: Car Modz it's not a strip single 3w led lights. Trying use 2-3 per side of Harley fender
+DIY: Car Modz it's not a strip trying to use two 3w led lights on each side of Harley rear fender. So can I use 1 module or how many? Thanks
ahh ok
how did u do thst
you need to buy the control module from exled and the instructions on how to hook it up is here: www.exledusa.com/parking-lights-turn-signal-control-module-for-1-color-led-setup-pair.html
The diagram just confused me more