bruce W It will definitely take a bit of planning but if you want to use both then wires out the side or top look like your best option. I look forward to seeing what you come up with. 👍
@@QCGUY It is late in the UK now buddy, but will do a video for you of my issues and upload to my channel with hopes of help in rectifying. Prior to looking properly, I noticed my drone trying head off here there and everywhere even in GPS settings etc.
Is there a Maximum of mah when I change my Zino original LiHV Akku to normal Lipo? Because I saw a tuning Akku for example with over 7800mah for the yuneec q500 4k, where the original capacity was around 5000mah. There it was also a lihv Akku. I want to use some normal lipos instead of lihv Akkus for the zino to keep it cheap, but wehre Wohle be the Maximum? I saw Lipos with over 5800mah and they where cheaper than lower mah range Akkus, so it would be fine, if these would also result longer flights. So what is the Maximum Akku mah value vor the zino with normal lipo? Does anyone Know? Best regards, Johannes
Just to clarify my last post! There are 6 pins on the battery and quad....the left 2 seemed to be joined together and the right side seem to be joined together...they both show 12.98 volts. so 2 pins on each side supply 12.98...it's hard to explain..but check it for yourself please
Sounds like a good idea do you have any idea where the wingland S6 power comes from and why couldn't we modify batteries for it some way. If you have any ideas send them to me
Just did a pin out voltage on the Zino battery. It looks like both outer pins supply 12.98 volts...the 2 middle pins show cell voltages.I will connect both outer pins with positive and negative and check if the android app show the proper {charge}...this is interesting for myself and maybe others.
And too boot you may be able to use lighter batteries with a higher C count....can't go wrong with C count....the quad will only consume the juice that it needs.Flying with a 70c battery won't blow-up your quad...the motors only have their KV values that's all....The draw is important thing to remember...you do not what to fly with a 4 or 5 cell battery..hehe
Excellent. .thanks for looking into that for me! I think I'll try do the mod to accept both styles of batteries. .keep up the good work my friend!
bruce W It will definitely take a bit of planning but if you want to use both then wires out the side or top look like your best option.
I look forward to seeing what you come up with. 👍
As a newbie with H501S... I think I landed a bit rough and one of the props and brass piece seem to be moved a bit... Can I fix myself?
waddac2 can you post something on your channel for me to see or join the group in the link and show us there?
@@QCGUY It is late in the UK now buddy, but will do a video for you of my issues and upload to my channel with hopes of help in rectifying. Prior to looking properly, I noticed my drone trying head off here there and everywhere even in GPS settings etc.
waddac2 sounds good 👌
Is there a Maximum of mah when I change my Zino original LiHV Akku to normal Lipo? Because I saw a tuning Akku for example with over 7800mah for the yuneec q500 4k, where the original capacity was around 5000mah. There it was also a lihv Akku. I want to use some normal lipos instead of lihv Akkus for the zino to keep it cheap, but wehre Wohle be the Maximum? I saw Lipos with over 5800mah and they where cheaper than lower mah range Akkus, so it would be fine, if these would also result longer flights. So what is the Maximum Akku mah value vor the zino with normal lipo? Does anyone Know? Best regards, Johannes
Good stuff.
Similar mod I have done to the later MJX/ JJRC models with the propriety fitted battery as opposed to the previous versions simpler 2 cable fitting.
Just to clarify my last post! There are 6 pins on the battery and quad....the left 2 seemed to be joined together and the right side seem to be joined together...they both show 12.98 volts. so 2 pins on each side supply 12.98...it's hard to explain..but check it for yourself please
Sounds like a good idea do you have any idea where the wingland S6 power comes from and why couldn't we modify batteries for it some way. If you have any ideas send them to me
Haven't looked into it. Sorry
Just did a pin out voltage on the Zino battery. It looks like both outer pins supply 12.98 volts...the 2 middle pins show cell voltages.I will connect both outer pins with positive and negative and check if the android app show the proper {charge}...this is interesting for myself and maybe others.
bruce W from what I have been testing it will work and I now have the battery and parts to do this mod.
It will be one of my next two videos.
👍👍
👍
me i make a little hull in all my drones
İ dont recommend modificate lipo batteries. Very dangerous
Light Trainer It’s not a lipo mod. Modify the quad to accept non proprietary batteries. It just adding the plug in for other batteries.
@@QCGUY i dont recommend again.
Light Trainer That’s your right! 👍
Some don’t have a choice in many places that can’t get these batteries.
And too boot you may be able to use lighter batteries with a higher C count....can't go wrong with C count....the quad will only consume the juice that it needs.Flying with a 70c battery won't blow-up your quad...the motors only have their KV values that's all....The draw is important thing to remember...you do not what to fly with a 4 or 5 cell battery..hehe