Connecting The Water Inlet hoses To Your Washer
ฝัง
- เผยแพร่เมื่อ 13 ก.ย. 2024
- How to connect and install the water inlet hoses to your washer
For additional product tips and troubleshooting please visit
Whirlpool's product help page: producthelp.wh...
www.whirlpool.c...
www.whirlpool....
Thank you so much!!! I had my connectors on backwards and water went everywhere! This helped so much!
Is there a backwards? How do you tell which end connects where?
not sure how you can put hoses on backwards?
This guy literally danced around the question everyone on here is having
Make sure that the washers are new and are sitting flat all the way inside. (don't reuse old hoses and washers.) Be really careful about over tightening on the plastic inlets on the washer. If you crack them, those parts will need to be replaced.
And what am I supposed to do of they Leak? Got water spraying all over the place right now
make sure you have washers in your hoses.If still licking at the connections use Teflon tape on the threads.
and that the washers are new (don't reuse old hoses and washers), and that they are sitting flat all the way inside. Be really careful about over tightening on the plastic threads- if you crack them, the parts will need to be replaced.
Is there a proper psi the water inlet hose should be at? It seems like the water pressure on mines is too high and the initial fill rinses both the detergent and fabric softener dispensers into the tub. Is this normal? Or shouldn't the fabric softener dispenser not be used until the rinse cycle.
Should the inlet hoses come with the washer? Mine did not.
Which one is hot which one is cold right or left?
What if there are leaks? What is happening, what should I do?
I have this same question
Plumbers tape might help.
Make sure that they are sitting flat all the way inside. Also that the washers are new (don't reuse old hoses and washers. Be really careful about over tightening on the plastic inlets on the washer. If you crack them, those parts will need to be replaced.
Good ❤
I feel bad for watching this
Good video, but seems like we’re all here to find out about how to stop the leaks, and you’re refusing to answer. What gives?