@@philbyrd2349 i’ll miss my grand marquis someone fender bender me 2 monthes ago and it got wrote off 😢 but i’ll get another in the future they are comfy cars
@@hazeone480get a Dorman after market intake and Rtv it around the coolant ports, let it sit for a day and then run it… had the same problem on my 05 4.6l grand marquis… leak sealed 🤌🏿
i brought the car in september 2021 and the car was sitting in the driveway for 5 months and then i started to drive the car and it's making a noise like that when i press the gas i thought i was having a valve train noise but i don't think that's the problem. i changed the oil and now it's making that noise only when i press the gas. i change the spark plugs the air filter pcv valve change the motor oil and filter clean the throttle body and the mass air flow sensor i didn't change the fuel filter yet but i will so what can that noise be when i press the gas
Perfect example why not to learn from on the internet two things not even using a jack stand and not even replacing the entire pipe When you get fumes in the car and die of carbon monoxide because you didn't put a pipe between the pipe you cut out
I figured it would be louder after cutting entire exhaust off mine yesterday, not really sounds cool but not illegal cool, I'm guessing 90-93 decibels Motorcycle is louder in my opinion.
whyd you cut your whole cats off and everything bro that is so stupid its gonna throw a code because of a false o2 sensor reading now and it wont pass inspection
These cars are pretty dependable, parts are pretty cheap, and are easy to fix. If you're in the rust belt, just make sure to check the frame, because it's built kinda like a truck.
buy new tire rods, this has nothing to do with sound but apparently those are common to go bad on 90's panther platforms, my dad's 96 vic is sitting in the driveway on jack stands cause the driver side tire rod broke. it's all sorts of scratched up underneath.
I got a pair of welded FlowMaster style mufflers on Amazon for like $65. Mine will be attached just before the Y pipe, so just beneath my seats with turndowns.
Yeah probably because you cut the CATALAYTIC CONVERTS off not the mufflers and your o2 SENSORS ARE GIVING YOUR ENGINE TOO MUCH FUEL BECAUSE OF A FALSE READING
@@codyrebelcb Im just making sure because I know that sometimes, stock axles aren't made for burnout because they can shear off if youre not careful. I know the video is about the exhaust but my b
![[Watch Party] RoV Pro League 2024 Winter | ( Bacon Time Vs PSG )](http://i.ytimg.com/vi/zM25REvnJW4/mqdefault.jpg)
You know you're making a good choice when you're holding a reciprocating saw and you say out loud "Alright, fuck it!"
no its a sawzall
@@seanmckay3392same shi
The only way
I'm about to do this to my grand marquis! Especially since I just put in new coil packs plugs fuel injectors racing cold air intake!
Do it man it sounds so good
Doesn't even need a muffler. Still so quiet with that single pipe : )
Yea it really is
To the people who are watching you irl, they probably think you're stealing the cat, lmao
Nahh they know I work on cars haha
I did muffler delete
Rear cat delete
Added glasspacks
Sounds so good and not too loud at all.
Just right 👌
There you gonna Ik you loved it
As the jack began to fail he said..............I FORGOT THE JACK STAND!
Safety first
dual exhaust would be amazing
Brother you're tearing up your car doing those burnouts
We love burnouts over here haha
Im in jersey how much do u charge for this?
Your from jersey I see I am too. That is a sick looking mgm I love it same color as my 02 town car
Aye and yea the cousins car is looking good
these things are the quietest cars to exist lol
4 cats
Frfr and they need to breath
@@philbyrd2349 i’ll miss my grand marquis someone fender bender me 2 monthes ago and it got wrote off 😢 but i’ll get another in the future they are comfy cars
How do you guys not have leaky intake manifolds?!?!? I can't get mine to stop leaking
Mind leaking coolent
Gaskets were fine thankfully but there known for having bad intake manifolds
There known for having bad intake manifolds
@@hazeone480get a Dorman after market intake and Rtv it around the coolant ports, let it sit for a day and then run it… had the same problem on my 05 4.6l grand marquis… leak sealed 🤌🏿
Just did this on my 97 Grand Marquis LS with factory duel exhaust. I put aftermarket mufflers on it though.
Hey it prob sounds better then stock
i brought the car in september 2021 and the car was sitting in the driveway for 5 months and then i started to drive the car and it's making a noise like that when i press the gas i thought i was having a valve train noise but i don't think that's the problem. i changed the oil and now it's making that noise only when i press the gas. i change the spark plugs the air filter pcv valve change the motor oil and filter clean the throttle body and the mass air flow sensor i didn't change the fuel filter yet but i will so what can that noise be when i press the gas
Cant diag it without seeing it
Perfect example why not to learn from on the internet two things not even using a jack stand and not even replacing the entire pipe When you get fumes in the car and die of carbon monoxide because you didn't put a pipe between the pipe you cut out
Yo también tengo un gran Markis , le quitaré el silenciador y le pondré igual un aumento y una pipa me encanto como sonó
Kid's always wear safety glasses.
Yea don’t forget that lol I wasn’t thinking
Oh man you should have ordered you a 40 series to put on there just one would have done it all
He was debating on what to get I said just start there
The tail pipe was 2” to ?
Got to cut them rear cats right after the o2 sensor . Sounds way better than the muffler delete
He's in Cali, both there and here in NY, that's a big no-no. They check during inspection.
@@yeanah2571 hot smogs every year💯
Took the rear cats off on a later video no check engine and passed inspection with no probs
Suck for those states lots of tickets if caught
What size tires are you running on those mustang wheels? I see there are two different stock sizes, so I was just wondering.
I figured it would be louder after cutting entire exhaust off mine yesterday, not really sounds cool but not illegal cool, I'm guessing 90-93 decibels Motorcycle is louder in my opinion.
whyd you cut your whole cats off and everything bro that is so stupid its gonna throw a code because of a false o2 sensor reading now and it wont pass inspection
You removed all 4 cats, won’t pass inspection unless you know someone that’ll do it for a lot of $$
Man it sounds great put up another video about wat u have done to it and is it a good car to buy as a daily driver
I drive an 06 as my daily and they're pretty beastly! Very smooth ride and they got a little power
These cars are pretty dependable, parts are pretty cheap, and are easy to fix. If you're in the rust belt, just make sure to check the frame, because it's built kinda like a truck.
i dont see a jackstand anywhere !!!!
🤷🏽♂️ invisible 👀
How do you comnect the new pipe to the old one? if factory is 2 inch i need to get 2.5 for it to go over and clamp?
2” connection piece
i want to change my muffler and the y pipe and the catalytic converters on my 2004 mercury grand marquis ls cause i don't like how it looks
Get to it and make it sound nice
Where did you get the after market 2” down pipe and 2” pipe connector from?
Just went to my local AutoZone
Thanks man! 💪🏿 I appreciate that
So you connected it with a 2” pipes
Who’s page, the mechanic guy or the guy who owns the car? Lol
My page the work done to the car is my cousins
Aye bro out of NJ, just followed you on insta
Thanks for the follow
Hell yea. I like it
It sounds real good
What size is the stock single pipe 2” inches?
Correct
What parts do I need to do this on my crown vic both sides?
Yo pls be able to tell me . i got a 2002 grand marquis and im looking to get the same mustang rims . so did you need any spacers or anything?
No. They stick out further, because of the offset, but usually that's the point.
You may or may not depending on how you want the fitment to look
Man what you did to that engine
Stock except exhaust haha
P71 H pipe, and a couple of Amazon welded chambered mufflers(Fauxmasters) and a couple dumps. Under $100 for dual exhaust dumping under the car.
Shiiit
Yea parts ate cheap the welding labor cost is what fucks it lmaoo
That’ll sound nice
Not at all would be nice to have a welding setup
Non car guys: "if you wanna use an electric gun it's a lot faster"...
Yo boss did that cat delete fail emissions ?
no it was fine with this vehicle
What is the diameter of the pipe that I need to replace the muffler?
2”
@@philbyrd2349 thanks dude!
Wya bro I’ll pay u to do mine
I’m in Cali
Always busy
I’m in Jersey
See I got my first car and it's a 98 grand marquis and I wana make it sound good but for a cheaper price and I just need advice
just cut the mufflers off with a saw
buy new tire rods, this has nothing to do with sound but apparently those are common to go bad on 90's panther platforms, my dad's 96 vic is sitting in the driveway on jack stands cause the driver side tire rod broke. it's all sorts of scratched up underneath.
I got a pair of welded FlowMaster style mufflers on Amazon for like $65. Mine will be attached just before the Y pipe, so just beneath my seats with turndowns.
That’ll sound good
Cheapest way and good sound
Goated im doing this rn
Your gonna love it
My 11 needs some type exhaust bad...it sounds like a granny car
They all do lol but DIY or exhaust shop
@@philbyrd2349 I did the Jones xpipe,FX mufflers and rear cat delete...she sounds great now
That out by atco? Also I’m in sj too. Got a p71 just picked up a tune and ordering trick flow heads
What tune?
@@lukerusch785 I got a sct tuner and Marty from moes speed shop tuned it
No Tune
Near atco
@@philbyrd2349 nice I’m not far but unfortunately got rid of my Vic now I have a charger lol
Yo i gotta 03 grand marquis, what rims are those?? They look like they ones on the mercury marauder
They're mustang bullitts
Marauder has bigger chrome 5 spokes, like the man said, Mustang Bullitts
I love the marauder rims
Mustang
Did you notice any power loss? I just did this and I feel so much stutter now when gassing it…
There's no power loss
Did it end up fixing bro im planning in doing im worried now?
Yeah probably because you cut the CATALAYTIC CONVERTS off not the mufflers and your o2 SENSORS ARE GIVING YOUR ENGINE TOO MUCH FUEL BECAUSE OF A FALSE READING
No power loss at all
Correct
What does this accomplish? Does it change the mpg? Does the car go faster
Mpg stays the same, and no, this is budget sound better stuff
a tiny bti but barely noticeable
Not at all just for the sounds
I heard that messes up the valves
Dumb
Nope
I know this video old bro but for future reference jack the car up from the rear differential.
Could jack it up at the diff or any other Jack points
I’m guessing u got codes by removing all 4 cats?
2 rear cats removed with any codes
Where did you get those rims?
They are the mustang wheels
Watch our wheels video at the junkyard
are the stock axels still in the car?
Yes, why would you ask that? Why would it have/require different axles?!
@@codyrebelcb Im just making sure because I know that sometimes, stock axles aren't made for burnout because they can shear off if youre not careful. I know the video is about the exhaust but my b
Stock Stock Stock
That’s for big hp numbers though so we’ve had no issues with them
Please lmk what year this marquis is
03
Why don’t anybody just unbolt it? It looks like it just unbolts off lmao am I stupid or something?
Nah usually exhaust from factory are bolted into the car with hangars then welded together with the pipes
@@halenberdeski6625 mine actually does un bolt but it’s rust welded together lol
Use a cut off wheel next time smh
No. Just no. Sawzaw for exhaust. Cut off wheel for bolts.
Saw way faster
Way quicker with the saw
Dude tryna set you on fire with a cut off wheel 😂😂 not for that small pipe lmao 😂😂😂@philbyrd2349
Yall 🥧 asl 😭 grow sone 🥜
Will doing this Effect my engine?
Not at all won’t throw a check engine either too far from the o2 sensors
Less back pressure may give you 5-10hp. Exhaust on these is heavy and restrictive...
@@alanholmes2366 possibly, I mean you see the size of that ravioli muffler he took off? OMG, should be something all us MGM drivers do
H pipe with cutouts or h pipe and just run dulls
What r dulls
@@jacobthereceiver3975 duels my guy. Duel pipes? Dulls is a term we use around where I live l.
@@Dabbo_007dulls is dumb. You might live in a dumb place.
Stock h
nice burnout
Haha Ik right I’ll tell him you said that
If you do some headers on it be louder
It would be but more money