Cheap DIY Airsoft Suppressor That Works Using Roller Foam.
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- Hi everyone, today we are looking at a cheap option for an airsoft suppressor insert, using foam paint rollers.
This is the cheapest option to have an airsoft suppressor that works, for a fraction of the cost.
if you want to have a silent sniper, use this roller foam suppressor to get does extra silent shots!
You can buy Foam ROLLERS here: amzn.to/3oPnE4F
Connect with me here: compiled.socia...
⚔️ GUNS ⚔️
My Sniper: Tokyo Marui VSR 10-PRO
My Sniper: Novritsch SSG 10
My Sniper BBs: 0.40 ~ 0.45 BB King, GEOFFS. : amzn.to/34SVAWG
My Pistol: WE Glock 18c , Tokyo Marui MK23 SOCOM
My Sniper Upgrades:
VSR :
Action Army Barrel- 6.03 - 430 mm
Action Army CNC hop-up unit
Action Army Trigger
Action Army Piston
Stock Cylinder + head.
Maple leaf Hop Up bucking - 60 degree
Maple leaf concave nub.
Barrel Spacers.
SSG 10 :
Maple leaf 6.02 barrel
Flamingo 60deg Bucking
Trios Design TDC
STALKER Piston
RAPAX 3j Spring
VORTEX Scope
🛡 GEAR 🛡
My glasses: amzn.to/34QdEkn - THESE DON'T FOG !!!!!!
My gloves: amzn.to/2rTKd9B
My Glock 18c holster: amzn.to/2s4c2y4
My Tokyo Marui MK23 holster: goo.gl/wHvhqk
My pistol mag pouch: amzn.to/2s4gMnl
My sniper mag pouch: amzn.to/2s4gMnl
My mask (With custom paint): amzn.to/2s4oHB8
My sniper camo: amzn.to/2rUlvpt
My ghillie suit : www.empireairs...
📷 CAMERAS 📷
My scopecam: Foxeer Legend 1 - 35 mm Lens
My NEW Scopecam : www.empireairs...
My headcam: GoPro Hero 3 + Black
My facecam: GoPro Session
BEST 360 camera : amzn.to/3oL5i4G
📬 CONNECT 📬
Instagram: DraculaAirsoft
Twitter: DraculaAirsoft
Facebook: / draculaairsoft
TikTok : / draculaairsoft
Thanks for watching the video! What do you think about this foam insert? let me know below! Remember to Subscribe!
Great simple trick. I use foam and green sink scourer cut into discs at about 1 inch intervals. The gaps give the air space to expand to make even less noise.
I’ll definitely give that a try. 🤝
can you make a video? I have full cut inside but with no spaces
Hey! nice idea!
I just happened to have a foam paint roll that fitted EXACTLY inside the fat suppressor of my DMR Dragunov SVU. What a coincidence...
Didn't have to cut it, just pushing it out broke the glue from the inside tube.
And also no need for the spring, it took literally 30sec.
I have to say that the sound from the muzzle was dramatically reduced, but since most of the noise comes from the motor and gears it's indistinguishable to me.
I'm sure it would be much more useful in a sniper tho.
great stuff bro
I just made one of these for my sons hpa gun. Such a simple project
I needed this video 15 years ago lol
Now I am grown and need to buy the real ones
For the none believers; I once bought a BSA suppressor for a PCP air rifle, it took the rifle from ears ringing to where I could actually hear the hammer strike the valve and cost £70($85ish).
When I took it apart it was literally a metal tube hair curlers wrapped in cotton wool.
You can also use the spring and put some cotton from the drugstore around it, works great
Great idea mate 🤝
I made one using 4 foam discs each disc is about 3/4 of an inch wide supressor is about 6 inches long. Each disc has a gap about an inch and a half between one another so air can get trapped. It was already pretty quiet. I took 4 decibels off the rifle. The piston slapping the head is still what you hear but it took away the towel snap noise at the end of the rifle.
nice one mate!
a much cheaper option is just buy 5 layer aluminum heating pipe insulator foam, its about 25c for 1 metre of foam.
Sounds good 👌
@@DraculaAirsoftSniper It shouldn't😁
I see what you did there 😆
Lovely watch 😍
I like the spring idea , think it will work on an air rifle .
Yessir of course it will
What a great Idea 👌
Thank you! Cheers!
Accustic foam will work better cuz theres more holes where air can go
Any updates since this on the before/after decibels? I'd love to see how homemade suppressors stack up (that's a little baffles joke I think....)
DIY suppressor huh didn’t know diy involved the actual thing
I would guess it would work on a pcp air rifle 🤔
It will
Genius 😂
Heel goed bedacht goed koop
How much hopup do you use on your rifle with the spring? I have a 500fps spring with an ASG Hush XL and the suppressor makes it inaccurate
I have a TDC mod on it, so i adjust on the go. Check maybe a BB’s is touching the suppressor and deviating
@@DraculaAirsoftSniper It seems like even with the spring suppressor and hop up lowered, it still shoots inaccurately. I upgraded to the 500fps spring because I was using a pvc pipe initially in hopes of fixing it. Any tips on how to make it more precise? I love the video by the way.
I had to basics change all the internals on kine to make it accurate. I’ll make a video about the rif soon, and i’ll be showing all the upgrades.
@@DraculaAirsoftSniper thank you so much
I liked to see a test
I will definitely do one. Good idea
@@DraculaAirsoftSniper gg im also building one btw
@@DraculaAirsoftSniper did you make the test?
test it
I will do mate soon, i have a video lined up for that.
@@DraculaAirsoftSniper have a good time
Were did you buy the suppressor from can u give the link?
You’ll need a adaptor for the VSR 10 : www.bztactical.co.uk/action-army-vsr-10-silencer-adapter-ccw-black
And then just find a suppressor you like. Plenty on eBay, patrolbase etc
@@DraculaAirsoftSniper can they ship to like Hawaii?
Will this work on a daisy powerline 880
What is the exterior part called I can’t find it
Metal suppressor
hey bro, are you from romania?
i am , Salut ;)
@@DraculaAirsoftSniper salut bro
@@DraculaAirsoftSniper salut
Does this work for real guns
No bro. It would melt
@@DraculaAirsoftSniper ok
ATF loves people who make their own Suppressors, so Much that they'll give you minimum 10 years to engineer another suppressor
Where did you buy the rollers from?
You can get them at any diy shop mate