Asphalt, Concrete or Paver Driveways- Which is the best?!?

แชร์
ฝัง

ความคิดเห็น • 367

  • @danervin2530
    @danervin2530 6 ปีที่แล้ว +18

    I laid down concrete pavers at my parent’s house in 2009. It was for an extension on either side, and my dad wanted to be able to park and drive medium duty vehicles on it. We ended up with a 12-14” aggregate base, with 3 separate layers of geo-grid in between. It’s been 9 years and had tons and tons and tons of trucks, loaded dump trailers, equipment, etc on them. Literally no settlement. We’re in MD and it’s lasted through many harsh winters. NO salt was ever used on it though.

  • @dylon4884
    @dylon4884 6 ปีที่แล้ว +40

    As an asphalt contractor and Sealcoater you can get a long life out of a asphalt driveway with proper maintenance. First when your going to get your driveway paved make sure they put at least 4 inches or gravel down and get it compacted. Then what most people don’t know is that company’s are only putting down top coat at 2-3 inches instead of putting a binder down at 1.5 inches and then top down at 1.5 inches so you get three inches total. I couldn’t tell you how many times I’ve paved a driveway or did patch work and find out there’s not only just top coat down but it’s only a inch thick. When your a home owner I would recommend asking the contractor to but road binder down instead of driveway binder because it’s a a lot stronger. And after the paving is done in 1-2 years you should Sealcoat your driveway, not with the stuff you can buy st home depo either you want a pro. And you want to be careful who you hire you want a company who uses a sand slurry mix. It’s the best to reguvinate the oils in the asphalt and you want to find a good company and learn about what they use for material ask them for a pamflit the plant hands them out for free! You also want to watch out for some company’s who will end up watering there material down. So do your research first. And after you get your driveway seal coated it should last 5+ years before it has to be re sealed again do not do it every year it will clog the pours on the asphalt and make it crack.

    • @joshriver75
      @joshriver75 6 ปีที่แล้ว +7

      I appreciate that info as a first time homeowner. 👍

    • @sorryociffer
      @sorryociffer 5 ปีที่แล้ว

      Whats your experience with heated asphalt driveways? Is it worth it if it prevents water in cracks freezing and expanding the crack? My current driveway is asphalt and desperately needs torn out and redone....just haven't decided on asphalt or concrete...

    • @ChristopherSimms
      @ChristopherSimms ปีที่แล้ว

      Hi Dylon. So one of the contractors told me he can pave over the current asphalt because it's already settled. The other contractors told me it has to be dug up. Who's telling the truth?

    • @ChristopherSimms
      @ChristopherSimms ปีที่แล้ว

      @dylon

    • @Betruetoyou4444
      @Betruetoyou4444 9 หลายเดือนก่อน

      Wow thank you so much for this valuable information!!

  • @KikoMaggiña
    @KikoMaggiña 3 ปีที่แล้ว +6

    I couldn't ask for more. This is a great, self explanatory video about the different types of surfaces that you can put on your driveway. Very well done sir.

  • @rickjohnson1632
    @rickjohnson1632 6 ปีที่แล้ว +16

    I was involved In asphalt paving for 30+ years. I've sealed it, cracked filled it, patched it, removed it , Installed it , hauled it and loaded it out BIG TIME ( all of the above) . When I put my asphalt drive way in I kinda went over board. I put probably 2 feet of stone in the driveway lol. Let it sit in stone for about 2 years then installed it in 2 lifts. 1 and a half binder / inch and a half surface lol. OK it was a little over kill, it was still there after 35 years, starting to fail a bit but still solid. In my world " black is beautiful"

    • @markhooker8520
      @markhooker8520 6 ปีที่แล้ว

      I guess that would work just fine!

    • @khakhananglastname745
      @khakhananglastname745 5 ปีที่แล้ว +1

      The National Asphalt Pavement Association recommends 6" of base for most driveways and 8" when heavier vehicles are expected. (Compact the subsoil, lay 3-4" of base, compact the base, lay another 3-4" of base, compact the base again) That doesn't sound too impressive when considering the 12+ inches that other people have mentioned.
      Is 6" of base and 3" of asphalt adequate like they recommend? Or instead, are they advocating for their own job security for when the driveway needs to be replaced sooner rather than later?

  • @Chanesmyname
    @Chanesmyname 4 ปีที่แล้ว +1

    We had pavers fitted because we trusted the person giving the advice and explaining the pro and cons to them, much like you have explained and those pavers still look great and any dipping over time has been lifted filled and levelled.

  • @thomasseibold4055
    @thomasseibold4055 6 ปีที่แล้ว +3

    Thanks for such a concise and objective overview. Your video strikes the perfect balance of authoritative delivery without bluster, inspires confidence based on your obvious experience, and keeps things moving visually and conceptually without going too fast. I've had great luck with a stamped concrete driveway, but only because my contractor/friend advised me to spend the extra for what must be a 6-inch pour with lots of rebar--no cracks (other than the cut ones) after ten years! However, I have a long driveway and am considering replacing the asphalt stretch with pavers. Thanks for the tips on how to make it last better.

  • @michaellwalker8748
    @michaellwalker8748 7 ปีที่แล้ว +6

    Wow! I greatly appreciate you posting this, as the wife and I are currently trying to figure which way to go. Whatever we choose, we're gonna see about putting down a thicker base layer for sure!

  • @brunolamote
    @brunolamote 8 ปีที่แล้ว +20

    As a Belgium farmer I would choose asfalt then concrete and last pavers. Because when the subsoil drops asfalt gently follows without breaking (to some degree) concrete creates holes underneath and when they are big enough the concrete gets destroyed. Pavers are just not strong enough for me. But in al cases thicker is better just like Stanley said and don't forget about the quality

    • @SinnerSince1962
      @SinnerSince1962 4 ปีที่แล้ว +5

      I appreciate you saying this about asphalt. I see neighbor's drives lifting at the joints and being broken at the edges. All the while, my asphalt driveway has developed character over the years. Also, a minor oil leak is less unsightly on asphalt than it is on concrete.

    • @Daaaaaaavid
      @Daaaaaaavid 2 ปีที่แล้ว

      what about granite stones? isn't that the most durable stone in existence?

    • @brunolamote
      @brunolamote 2 ปีที่แล้ว

      @@Daaaaaaavid the stones themselves are indeed very durable but they don's seal the subsoil completely, when a couple of stones sink they create a puddle where the water can collect and softens the subsoil thus expanding the problem.

  • @jcchandley
    @jcchandley 7 ปีที่แล้ว +5

    Thank you so much for your video. It has helped me make the decision to use pavers to replace my old, tired, worn asphalt driveway. It's great to have expert advice.

    • @JaymesWebbs
      @JaymesWebbs 3 ปีที่แล้ว

      I’m just curious, have you replaced your driveway with pavers? How is it?

  • @jeffhoser7717
    @jeffhoser7717 8 ปีที่แล้ว +2

    DM, the "bottom line" for engineering a driveway - like any road - is "base " ! Driveways and hard patios - like any travel way - fails from the " bottom up " ! Your video is a most cogent and worthwhile examination of the issues !

    • @Dirtmonkey
      @Dirtmonkey  7 ปีที่แล้ว

      Thanks for sharing!

  • @carolyngrey754
    @carolyngrey754 5 ปีที่แล้ว +1

    Gives enough infrormation about some things to consider about using asphalt, pavers , or concrete for building a driveway.

  • @davidnewman5982
    @davidnewman5982 3 ปีที่แล้ว +1

    I have a Seal Coating Business and I have to say you edumacated me a lil more I enjoy your videos keep em coming and again A1 Video

  • @burdizdawurd1516Official
    @burdizdawurd1516Official 8 ปีที่แล้ว +9

    As a fourth alternative, especially for people who have their own machines, gravel makes an excellent road surface. Every ten years we get some more and regrade with the backhoe. No cracks, no sealing, no settling, but you have to like gravel. I've lived with the driveway my entire life, so it's not a big deal but for a more urban area a hard surface would be better.

    • @wcvp
      @wcvp 6 ปีที่แล้ว +3

      How well does that work in the winter with snow?

    • @13panda13
      @13panda13 2 ปีที่แล้ว

      Washes off hills every year

  • @carlam2318
    @carlam2318 6 ปีที่แล้ว +2

    Thank you so much. I was deciding on stamped concrete and pavers. I'm glad I choose pavers now that I've seen this video

  • @denver3369
    @denver3369 6 ปีที่แล้ว +6

    Thanks for the comparison, I guess the stamped concrete is off my list.

  • @jamesprice1859
    @jamesprice1859 5 ปีที่แล้ว +1

    You are worth your weight in gold to me. Learn important stuff every time I watch.

  • @owningit625
    @owningit625 8 ปีที่แล้ว +1

    thank you for this information. a good source of asphalt information has been lacking on TH-cam for quite some time! I jumped in to the sealcoating/crack filling business 1.5 years ago without any prior knowledge or experience. I have had some success but am always hungry for more knowledge. please keep it up!!

    • @Dirtmonkey
      @Dirtmonkey  8 ปีที่แล้ว

      Check out Wecoat. His channel is dedicated to it.

  • @breaubarile262
    @breaubarile262 8 ปีที่แล้ว +4

    Stan, just a side note for pavers. Some pacers can be turned over but most are one sided. How ever they still are the easiest to repair if cracked. When I do a paver project, I always leave extra pavers for that reason.

    • @Dirtmonkey
      @Dirtmonkey  8 ปีที่แล้ว +4

      Very true. Your right and thanks for pointing that out.

  • @soullessone4681
    @soullessone4681 8 ปีที่แล้ว +10

    i put a base of 12" crushed asphalt on my parking area and 6" out to the road never had any problems nor do i have any cost of maintaining

  • @straydoggio
    @straydoggio 8 ปีที่แล้ว +4

    Good video. Last year I did a bit of 'science' study when looking at concrete as a possibility for my driveway. I've still not moved forward on it yet, but I'm lifting my research from a Word file FYI, because it compliments your own findings about salt and concrete risks: >>> Concrete has high strength when it is compressed, or 'squeezed'. However, it is extremely weak when it is subjected to tension, or 'pulled'. Salt can take advantage of this weakness. Believe it or not, while concrete appears to be a very dense material, it is in fact quite like a blotter. It can and does absorb water. You can actually see this happen on a hot summer day. Sprinkle some water on your sidewalk or driveway and look very closely. You can actually see the water penetrate the surface of the concrete. When you spread rock salt on your concrete to melt snow and ice, the salt dissolves the snow and makes a salt water mush. The melting action of the salt allows water to enter the concrete. If the temperature then drops and the water freezes, the growing ice crystals can blast apart the concrete. Salt is also hygroscopic. It attracts water. It can cause concrete to become more saturated with water than it would otherwise. The presence of this extra water in freezing conditions can spell trouble. The volume of water increases by 9 percent when it freezes within the concrete matrix. The pressure of the growing ice crystals can cause the surface of the concrete to fail. It usually spalls off.

    • @Dirtmonkey
      @Dirtmonkey  8 ปีที่แล้ว +2

      Wow- That is awesome research. Thanks for sharing!

  • @HeliRy
    @HeliRy 6 ปีที่แล้ว +34

    After watching this, I'm tempted just to keep my fugly gravel driveway lol

    • @Luckingsworth
      @Luckingsworth 4 ปีที่แล้ว +3

      It really is the best option. I usually pour a concrete slab I can use to back up a car and then leave the rest gravel. Make a border with concrete or brick is you want it to look fancier.

    • @angelgjr1999
      @angelgjr1999 4 ปีที่แล้ว

      Gravel isn’t ideal if you have delivery drivers drive up your driveway. Our vans weigh 10-20k pounds. Very heavy and easily get stuck on non solid surfaces. Complete nightmare to deliver to houses with mile long dirt driveways.

    • @CripplingDuality
      @CripplingDuality 4 ปีที่แล้ว +2

      @@angelgjr1999 its also totally unsuitable if you live anywhere with snow.

  • @ph11p3540
    @ph11p3540 4 ปีที่แล้ว

    Our condominium association went crazy on a very expensive paving system for our short main drive almost 25 years ago. It was chosen with long term durability. I forgot what underlay came first the sand or the crushed gravel but geomat were laid between them. Then the really expensive part was laid in, 6 inches of reinforced concrete. After the concrete cured a very thin dusting of sand was applied before cobblestones, asphalt or finish concrete was applied. This top pavement is called the ware layer and is expected to be replaced when salt damage or other damage occurs with less effort. The driveway had to be cut through with heavy concrete cutters on week for emergency access to a water main break but otherwise the rest of the driveway is quite even and pleasant to use. 25 years later the condo association is quite happy with this expensive paving system.

  • @theotherrobzombie
    @theotherrobzombie 6 ปีที่แล้ว +2

    Great video! I learned a lot. I already have a partial paved driveway and I'm eventually going to get the rest paved as the weeds/grass popping up in the stones of my driveway is driving my OCD crazy!

  • @fermiticus4034
    @fermiticus4034 3 ปีที่แล้ว +2

    In my years as a mason, landscaper, etc....I have done several paver driveways (patios and walkways too)...I have poured many driveways...and now I work for myself, sealcoating asphalt driveways (and handyman services).
    My landscaping is boulder walls...my patio/firepit and walkways are stone...and my driveway is gravel. When I die...they will cart me out of here via my gravel driveway.

  • @josepepe3810
    @josepepe3810 8 ปีที่แล้ว +1

    Excellent video your expertise is saving us a lot of money, keep the great work !!!!!

  • @dhawthorne1634
    @dhawthorne1634 ปีที่แล้ว +1

    My unsealed asphalt driveway is 40 years old and the only crack is from a shallow rooted tree that the previous owner had planet next to it. Aside from sinking an inch and a half against the garage slab, I've got no reason to do anything with it for another decade. If it does get replaced, I'll just have them scrape it up into the new mix, lay it a bit thicker and leave it unsealed again. For comparison, the house on my right was religious with the tar and had to resurface once and replace once in 35 years; the house on the left sealed every other year and ended up replacing after 35 years.

  • @Mo-OhioTreeRemoval
    @Mo-OhioTreeRemoval 8 ปีที่แล้ว +3

    I used to drive a concrete truck. We poured colors every now and then. Usually for contractors who were going to have a stamp design

    • @Dirtmonkey
      @Dirtmonkey  8 ปีที่แล้ว

      Yes. Exactly what it's used for

  • @semantinipassat8504
    @semantinipassat8504 8 ปีที่แล้ว +33

    U just confirmed brick stone drive way for me all the way.

  • @JerryWhatshisface
    @JerryWhatshisface 8 ปีที่แล้ว +11

    I live in the Chicago, Illinois region (land of winter freezing & sub zero temps) and want to replace an asphalt driveway with concrete. (Asphalt driveway is 2 years old when home was built). So let me get this straight; 8" base, wire & 6" pour. Thank you for the heads up (video & comments) on that. Now, I want a black driveway. I understand in my climate (winters) it's recommended to use "iron oxide black" and NOT "carbon black" due to air / water entainment. (The darkness of the black tint isn't a major issue for me). Have an expert opinion?

  • @jayphillips4058
    @jayphillips4058 8 ปีที่แล้ว +20

    Couple of points about concrete:
    1 - All concrete shrinks when curing, just like the mud in a puddle cracks and curls in a summer sun. A finisher's job is to control how fast the curing happens and providing for joints to direct the cracking to specific places. Rebar, wire mesh, fibermesh, not pouring in heat/wind/low humidity and different chemicals can assist in minimizing shrinkage and subsequent cracking, spalling, etc. Whether mechanical jointing or diamond saw cutting is used, it has to be the proper depth and location. Water/cement ratio is important. Concrete thickness doesn't necessarily deter cracking.
    2 - To a large degree, especially in severe freeze/thaw areas, subgrade prep is top dog in assuring long term slab integrity. Adequate washed rock drainage directly underneath the slab, along with compacted subgrade beneath that provides for maximum resistance to frost heaving from expandable clays and subsurface water. Rebar in impact areas or soft loamy subgrades helps. Integral piers in the slab can help extremely soft areas.
    3 - Salt, de-icer, magnesium chloride, etc. kills concrete. Period.
    4 - Over-tooling when finishing causes much of the surface cracking, along with adverse weather. Pour it and get the initial finish on, then let it bleed and stay off until it's time for the kneeboards. Don't throw water on the surface, and don't rub on the edges for something to do while it sets up. Save your energy to hit it when the time is right and you'll be rewarded with a nice looking job.
    /24 years in the biz, batching, hauling and finishing.

    • @Dirtmonkey
      @Dirtmonkey  8 ปีที่แล้ว +4

      All top notch-Thank you! I think I need to interview you!!!

    • @chucklaneChuckylane
      @chucklaneChuckylane 7 ปีที่แล้ว

      Jay Phillips Pretty close description there. I agree about letting it air, I try to not close it up too soon with a fresno too when I can afford to. I live in Nevada, summers can get you and if the heat don't the wind will. We use con film to help close up with the bullfloat when we need to. I don't like water on the top either, a light fog won't kill it if used evenly and in moderation when no con film is available, but half the time some idiot will spray it all over like fucking crazy (I work with a few sometimes like that). But edges and joints are number one and should be laid down right away, unless you're using boards and a straight edge to tool the joints you can keep em' straight with walking tools if you get them in time. But all edges should be floated flat & opened up even if you trowel right back over them, they need to be opened up so you don't fight em'. Personally , I don't use knee boards anymore unless I have to, as long as I can reach it with a tricky trowel that I flat trowel with, a 5x20'' square end trowel, I just rounded out the corners on it some. I trowel all wall lines with my 5x24'' before we rod it, then stay away from it with walking tools. /40 yrs. just finishing. After x amount of years you start to find out that it don't always have to be hard, if you haven't yet you will (and you can still do nice work).

    • @jedimaster8691
      @jedimaster8691 7 ปีที่แล้ว

      I have a pipe leaking 740 gpd, and the area is under my driveway. I'm asking you, please tell me who I should contact and fix this, and how much is a reasonable cost in the pacific northwest.

    • @FishFind3000
      @FishFind3000 7 ปีที่แล้ว

      Jay Phillips your pretty spot on. Of my driveway I've got a 6" pour and metal mesh. It's a California style so it's cracked but in the gaps provided. The metal mesh has kept it from moving anywhere. We only have one ever small crack about 6' on the corner of the driveway. Our driveway is sealed and has no issues. Is over 13 or so years old. Just needs a good power wash every so often.

    • @baconneggs2406
      @baconneggs2406 7 ปีที่แล้ว +1

      Jay Phillips so only pour concrete on the 4 good days of the year we get to pour concrete and good luck😂😂😂

  • @ricanbee2849
    @ricanbee2849 4 ปีที่แล้ว +1

    I been watching you and yes your right about all you talk about

  • @Tarektioban
    @Tarektioban 8 ปีที่แล้ว +1

    You forgot to mention rebar, rebar will add far more strength to your concrete driveway than a thicker base or pour, though those are definetely helpful as well, just don't ever forget to put rebar in at a 3ft grid minimum.

  • @gunfisher4661
    @gunfisher4661 2 ปีที่แล้ว

    Others are that in our state concrete raises the property taxes where the other 2 don`t, pavers look good and last good if they never get salted for the snow. Then asphalt it raises the air temp around the area year round. My father extended his drive around the house into the new back yard garage well after that the A/C would no longer cool the house sufficiently. Just a few things to look at.

  • @ThePlowGuys
    @ThePlowGuys 8 ปีที่แล้ว

    Great video. I am having my driveway done this summer. I excavated 12" down and back filled with 3/4-0 mix. I packed down and left to sit one year. Now comes the asphalt. This will be applied after the area is re compacted and 2" of compressed asphalt will sit on top. Hope it holds together.

    • @Dirtmonkey
      @Dirtmonkey  8 ปีที่แล้ว

      A year of settlement and compaction will be rock solid. 😄👍

    • @ThePlowGuys
      @ThePlowGuys 8 ปีที่แล้ว

      The concrete border has been installed and the crew just leveled and compacted the area this afternoon. paver should be here in a couple of days.

    • @ThePlowGuys
      @ThePlowGuys 7 ปีที่แล้ว

      Almost one year now and the driveway looks great. I will be looking to seal it this summer. what should i use?

  • @ThisIsNotAVideo
    @ThisIsNotAVideo ปีที่แล้ว

    I'd like to see a similar video on an even wider variety of driveway options, including eco ones like previous pavers, "grass-cells," gravel, dirt, ...

  • @rsservices1760
    @rsservices1760 8 ปีที่แล้ว +1

    Here in Alaska the muni cross section for driveway is 18" of gravel(3" minus/pit run), 2" leveling course(D1 or RAP) and 2" of asphalt, or 18" gravel and 6" concrete on anything that will be driven on. I personally always put geotextile woven fabric under all my excavations too! Makes for a good driveway! I never get just putting 4"-6" of sub base....just won't hold up here...

    • @Dirtmonkey
      @Dirtmonkey  8 ปีที่แล้ว +1

      You guys have to much frost movement-you need the extra base.

  • @juanescobedo61
    @juanescobedo61 7 ปีที่แล้ว +1

    Love you video's bro i learn something every time i watch them thanks. And GOD bless you.

  • @andreweasty
    @andreweasty 8 ปีที่แล้ว +2

    In Australia we typically don't use asphalt mostly we use concrete but yes always get a good base for it and use reinforcement mesh it helps stop alot of flexing and cracing in the concrete and whenever you join against and existing pour/hard rock like surface pin/dowel it to it in my area so many didn't pin and dowel their driveways paths to their homes and they pop up and make nasty trip hazzards

    • @Dirtmonkey
      @Dirtmonkey  8 ปีที่แล้ว +1

      Very true. Good point👍

  • @lorandoane118
    @lorandoane118 2 ปีที่แล้ว

    This advice is priceless!

  • @wes4less
    @wes4less 7 ปีที่แล้ว

    Agree !! Was going to do 4 but now will do 6 Thanks !!

  • @JRAD80847
    @JRAD80847 8 ปีที่แล้ว

    SS1 emulsified tack oil works great for a quick repair on your asphalt surfaces, such as skin patching, or saw cutting with a diamond blade, correcting any base issues and then re-paving the problem area. Lots of paving companies are happy to pick up this work as filler between big jobs where there base isn't ready. You apply the oil, hit it with a tiger torch to prime it, add the new hot mix over it and compact for finish. Or hitting you're existing asphalt with a tiger torch will heat up the surface to make it pliable and problems can be corrected, reasonably easily, with an asphalt lute (rake), plate tamper, and asphalt sprayer (chemical sprayer from any hardware store). All that said the corrected area will take on a new color and stand out so seal coating should also be considered after the repairs are completed for a uniform finish. Re-surfacing is usually after 15-25 years for a properly finished job. If you need re-surfacing after 3 years, the paving contractors in your area are not doing their job properly. For example, not excavating the sub base far enough, not excavating down to clay, if clay can't be found under 2 feet of excavation, not introducing geogrid (trampoline like fabric) with at least 6" of structure (3/4 road crush on top - fractured on 3 faces for ideal compaction - or soil cement), not introducing water to the gravel during the compaction process for ideal densities and maximizing load capacity of that base. I'm talking about a 4 season climate. If you guys are only getting 3 years out of your asphalt in Michigan I might just come down there and set up shop! That's crazy!

    • @Dirtmonkey
      @Dirtmonkey  8 ปีที่แล้ว

      Joshua- Spot on advice! Thank you!

  • @karisblake
    @karisblake 8 ปีที่แล้ว

    I am considering the stamped concrete look for my back patio. Thanks for the tips on the pour!

    • @Dirtmonkey
      @Dirtmonkey  8 ปีที่แล้ว

      😉👍

    • @BaberJacks
      @BaberJacks 8 ปีที่แล้ว

      make sure you clear seal every couple ov years. if they towel the color in it will wear out and it will look crappy. the trick is diy every few years, geta disposable roler and pole a can ov sealer and solvent, thin the 1st coat then straight on the second coat. wil save you bucks down the track, a 300buck sprayer is not worth it unless you know someone that you can lend you one.

    • @semajniffirg230
      @semajniffirg230 8 ปีที่แล้ว

      BaberJacks nobody mags in the color anymore. everyone throws the bags of color right into the mixer and has the driver spin the drum for a while when bringing it to the slump they want.

    • @BaberJacks
      @BaberJacks 8 ปีที่แล้ว

      yeh but to thoes that have existing stamped, usually they throw the color in @the plant, the release agent may be another color and thus you have 2 color, best to seal so to get best results

  • @atlasgabriel5461
    @atlasgabriel5461 7 ปีที่แล้ว +20

    Pavers it is then, Thanks for this video.

    • @Dirtmonkey
      @Dirtmonkey  7 ปีที่แล้ว +2

      Glad I could help!

  • @rgustoz28
    @rgustoz28 5 ปีที่แล้ว +1

    Very professional and helpful! Thank you.

  • @malcolmdivorty6852
    @malcolmdivorty6852 3 ปีที่แล้ว

    Thank you . A very interesting and informative video

  • @femineity
    @femineity 7 ปีที่แล้ว +4

    Hi Stanley! Thanks for the video. It was very informative! My question is, I live in the Mid West were we get lots of snow and below freezing temps in the Winter. Since using salt is inevitable and since pavers are, I assume, made out of a concrete like material, won't the salt eat at it just as it would a concrete driveway? Thanks again for the video!

  • @nitrotnt1005
    @nitrotnt1005 8 ปีที่แล้ว +5

    Stamped concrete will usually have a sealer on it as well making it slippery when wet. It doesn't seem to fair well if shoveling snow with a metal shovel either.

    • @Dirtmonkey
      @Dirtmonkey  8 ปีที่แล้ว +2

      Good point👍

  • @jimmybrice6360
    @jimmybrice6360 3 ปีที่แล้ว +3

    surprised you didnt mention rebar in concrete. i find that usually keeps cracks from forming. i also split my driveway into 4 sections with a row of brick for separation

    • @thomaspayne6866
      @thomaspayne6866 2 ปีที่แล้ว

      And now concrete can come with fiber to replace and improve the concrete.

    • @jimmybrice6360
      @jimmybrice6360 2 ปีที่แล้ว

      @@thomaspayne6866 is that used to replace rebar ?

    • @waleedsharaf4524
      @waleedsharaf4524 ปีที่แล้ว

      ​@@jimmybrice6360No, it doesn't replace rebar. It gives the concrete greater ability to flex before breaking. You still need the rebar too.

  • @rauleyshar3635
    @rauleyshar3635 5 ปีที่แล้ว

    Thermal expansion is probably the number one reason. As the top layer heat up, temperature differential between the top layer and bottom layer causes stress since bottom layer is colder and held by internal steel reinforcement.

  • @sintony69
    @sintony69 8 ปีที่แล้ว +1

    Very helpful video. I just purchased a home downtown and Im in the middle of you know....getting the city to look and approve whatever I want to do. That 8" base material is key! now I know what to say when I call somebody to do the job. Deeper base, less cracking. right?

  • @lawyer-562
    @lawyer-562 4 ปีที่แล้ว +2

    Thank you so much Sir. You have saved us a ton of money and time here in Maryland with this video.

    • @Dirtmonkey
      @Dirtmonkey  4 ปีที่แล้ว +1

      Glad to hear that, thank you Tony !

  • @mattminde1747
    @mattminde1747 2 ปีที่แล้ว

    Depends on water table, sub grade, compaction of soil is huge. Also what is driving on the on it. Heavy trucks concrete. Heavy vehicles can sink on asphalt on hot summer days.

  • @ChicagoTechGuy
    @ChicagoTechGuy 6 ปีที่แล้ว +2

    I like paver idea for a drive way and walkway how do you shovel it in the winter? Any issues with snow?

  • @diggingmystyle
    @diggingmystyle หลายเดือนก่อน

    Pavers can be a pain in the arse to maintain. The joints will be filled with polymeric sand, which is very tricky to work with even for professionals and tend to washout a little every time there's a hard rain. It can also be very expensive to install depending on how well the base will be prepared.

  • @RJ-lk5pj
    @RJ-lk5pj 6 ปีที่แล้ว

    Some good info.. have an asphalt driveway I need to replace.. was thinking about heating it along with the sidewalk and walk way up to the front door. Concrete

  • @tsolo8888
    @tsolo8888 8 ปีที่แล้ว +2

    Nice job on a great video! I'm looking to replace a concrete driveway that has cracks all over, due mostly to settling, and nearby tree roots. I am thinking of using pavers but I wanted to ask you the pros and cons of the different types. Have you heard of the composite pavers made from recycled tires? They're lightweight, and they are made to handle the weight of cars/trucks, etc., but I'm sure there are other advantages/disadvantages compared to bricks or concrete pavers. Thoughts?

    • @Dirtmonkey
      @Dirtmonkey  8 ปีที่แล้ว

      I haven't heard of them- is their any long term tests out there. That is really the indicator if they will hold up. I don't believe "claims" unless I see they have lasted in a real application for many years.

  • @Stephjtehmama
    @Stephjtehmama 7 ปีที่แล้ว +1

    Thank you this was very helpful! We are going to do pavers!

  • @adamcturnbull
    @adamcturnbull 8 ปีที่แล้ว +1

    This is excellent. Thank you for making this video.

  • @jennybaez-cepeda4919
    @jennybaez-cepeda4919 4 ปีที่แล้ว +1

    Thank you very much for the video I learned a lot

    • @Dirtmonkey
      @Dirtmonkey  4 ปีที่แล้ว +2

      So glad to hear that, thanks Jenny !

  • @jollyroger6258
    @jollyroger6258 2 หลายเดือนก่อน

    We did our drivway im pavers and it's perfect eight years later.
    We have many neighbors with blacktop driveways:
    - You can't walk barefoot on blacktop in the summer - too hot
    - You can't park a motorcycle or bicycle on blacktop because the kickstand will make a hole
    - Every two years they have to reseal the driveway. This means:
    1. They have to either pay someone to do the whole job or DIY and still spend money on material
    2. They lose the use of the driveway for at least a day

  • @lisagarnier8059
    @lisagarnier8059 7 ปีที่แล้ว +1

    Thanks this was very informative

  • @remilaurin9324
    @remilaurin9324 7 ปีที่แล้ว

    As per ACI specs we cut our lines 1/4 of the slabs thickness and depending on the slabs size we measure and cut accordingly. No more then 10' apart.

  • @jessesnowden
    @jessesnowden 7 ปีที่แล้ว +1

    Hey stanley! This is the exact question I've been looking for answers to. I think I've decided on a poured concrete driveway. 2 Questions for you: on your driveway did you use any rebar/remesh of any kind? And does having a steep slope change anything with the base material? My driveway is only 20' or so but sits at about 15-20° above level. Thanks friend! Super helpful videos

  • @scottmcintosh2988
    @scottmcintosh2988 5 ปีที่แล้ว +1

    We use up to 12 inches of recycled asphalt product R A P
    In wet areas we place 3 inch minis then compact with bobcat tires and roller then add one inch minis R A P to grade then 3/4 inch base asphalt then 3/8 inch top asphalt 330 degrees F roal it and compact it we make it like a Mass. HIGHWAY SCOTT FROM NH .

    • @Dirtmonkey
      @Dirtmonkey  5 ปีที่แล้ว +1

      Thanks for the comments Scott, thanks for viewing !

  • @abadperez1112
    @abadperez1112 8 ปีที่แล้ว +2

    Great information. So the more inches on foundation before the pour, the better it will be?

    • @Dirtmonkey
      @Dirtmonkey  8 ปีที่แล้ว +2

      Yes! as long as its good base material and compacted.

  • @michaelbryant4772
    @michaelbryant4772 4 ปีที่แล้ว

    My neighbors stamped concrete surface is pitting and eroding from the glossy surface. Rocksalt used in winter did that. I told him to use Calcium Chloride for de-icing instead.

  • @elifernandez3769
    @elifernandez3769 8 ปีที่แล้ว

    also with stamped concrete cracking, you still have to saw in the joints just like you would a normal driveway or patio. but the problem with that is contractors are cheap and don't cut down enough for it to be a good control joint, they try to save their blades by just cut 1/4 " and making the control joints way too spread out when it should be 3/4"-1" deep at least. and every 8ft in every direction.

  • @benjamindavis5762
    @benjamindavis5762 7 ปีที่แล้ว +45

    I just paint the grass and soil grey! Talk about a cheap driveway!!!

    • @janetstone236
      @janetstone236 7 ปีที่แล้ว +1

      hahahah you made me laugh, and made me think of my plan.

    • @elimiller8019
      @elimiller8019 7 ปีที่แล้ว

      Melovessumguns 😂😂😂

    • @carlam2318
      @carlam2318 6 ปีที่แล้ว

      Wait... what 🤣🤣🤣🤣

    • @Reddylion
      @Reddylion 6 ปีที่แล้ว +1

      Melovessumguns lol

  • @janetstone236
    @janetstone236 7 ปีที่แล้ว

    You were awesome teaching and explaining all 4 surfaces and sub-surfaces, videos and photos were awesome, thanks for your time and experience. [side note: you are very handsome!] Any thoughts on crushed shell vs crushed granite, do know granite is more expensive- I am in the 'woods' and single income and do all my own projects, creating a new drive is on the list.

  • @jeremyjuntunen3087
    @jeremyjuntunen3087 6 ปีที่แล้ว +1

    I really want to move to where all of these guys are having work done. I'm an asphalt paving contractor. paved thousands of driveways. I live in an area that we get lots of snow, and the weather is usually not sunny but for about 3 months out of the year. Proper way to lay asphalt is to have a proper base first. The base needs to include at least 12 in of pit run, which is very large Rock and gravel mixed basically virgin gravel out of the ground. Graded and compacted to the height and level that you want your driveway to be. Next you need 2 to 3 in of 3/4 crushed gravel to reach your final grade. It then needs to be sprayed with alot of water and compacted until it feels like concrete to walk on. This is the only way to get a proper base and not have to worry about the material that is being laid on top of it, whether it's asphalt concrete or pavers. I noticed cracks in all of the driveways that you showed your video. If you don't want cracks then make sure that you got a proper base and by base I don't mean small 3/4 inch Rock 12 in thick. that doesn't work. Small crushed rock is not a good base material it moves around when you drive on it and never gets the compaction that you need you need big rock 10 inch plus with binder soil mixed with it. After all your prep work is done and you have the proper grade then you're ready to lay asphalt on top of it. A 3in compacted asphalt Mat is very desirable but 2, 2inch lifts is even better. There is absolutely no reason to seal coat your new driveway for the first 12 months because asphalt doesn't cure for 12 months and sealcoating you will not do any good. After 12 months then you need to apply a seal coat. The average cost is about $0.20 a square foot and should be applied every third year. If you do end up with some cracks in your driveway the cracks need to be filled with hot rubberized crack filler. It needs to be applied to fill in the cracks to the height of the asphalt it might take two or three passes to get it to the right height. I have driveways that are 15 + years old that have very few cracks in them and still looks like new. If the cracks are filled immediately and not allowed to sit with moisture and anything else that can get in them they won't expand can you drive will still look new 20 years later. There is no doubt in the driveways that I laid today will still be there 30 years later and look good. Love you Work Stan, I enjoy your videos. Thank you for sharing!!!!

    • @Dirtmonkey
      @Dirtmonkey  5 ปีที่แล้ว +2

      Appreciate the comments Jeremy, thank you !

  • @tomesmores5669
    @tomesmores5669 5 ปีที่แล้ว +1

    Hey thanks for the great informative video!

    • @Dirtmonkey
      @Dirtmonkey  5 ปีที่แล้ว +1

      No problem Tom, thank you for watching !

  • @ericconklin6195
    @ericconklin6195 2 ปีที่แล้ว

    Great video

  • @Melicoy
    @Melicoy 5 ปีที่แล้ว +5

    How do you POP out interlocking pavers to turn them over and reinstall... lol
    Dont they have a lip to hold them in place?
    Didnt see any of your videos showing how to do this... Link please?

    • @flatliner1599
      @flatliner1599 3 ปีที่แล้ว

      There's a few different tools but something like this: th-cam.com/video/-fHSlUPTql0/w-d-xo.html

  • @fernandocontreras7665
    @fernandocontreras7665 7 ปีที่แล้ว +1

    good info thank you

  • @stephenblackburn1387
    @stephenblackburn1387 2 ปีที่แล้ว

    I'm getting 3in of binder then 3in of top. I also have a 65 x12 pad of pavers underneath I have 3in of rock then 3 in of binder then paver

  • @nessypyott8832
    @nessypyott8832 4 ปีที่แล้ว +1

    I really don’t know what to go with, paving blocks down at the mo, but they have sunk,

  • @lamontwolverton8959
    @lamontwolverton8959 7 ปีที่แล้ว +1

    Thank you, what a Pro!

  • @ericawilliams1779
    @ericawilliams1779 4 ปีที่แล้ว

    Great video! What exactly is your driveway made of? I like that look but you didn't specify.

  • @hxFubar
    @hxFubar 7 ปีที่แล้ว

    Awesome Vid, subscribed and liked. Question, do you have vids on the pros and cons and cost of permeable driveways. like the stone/grass combo's or the plastic base with gravel.

    • @Dirtmonkey
      @Dirtmonkey  7 ปีที่แล้ว

      Not yet-but thats a great idea.

  • @DJ-zj4fb
    @DJ-zj4fb 6 ปีที่แล้ว +1

    Very helpful. Thank you

  • @BosephusBigelsworth
    @BosephusBigelsworth 8 ปีที่แล้ว

    Excellent video, thanks!

  • @cannabeardglass4730
    @cannabeardglass4730 6 ปีที่แล้ว +1

    Thank you for the information.

    • @Dirtmonkey
      @Dirtmonkey  6 ปีที่แล้ว +1

      You're welcome, thanks for watching !

  • @rodgermills1496
    @rodgermills1496 8 ปีที่แล้ว

    Pavers are also subject to the same deterioration as poured concrete but can be replaced separately, buy extras upfront you will need them. Also even with the best installations the side pavers will move away from the field.

    • @Dirtmonkey
      @Dirtmonkey  8 ปีที่แล้ว

      Good point Roger. get a few extra upfront and then you will have them as needed and the colors will match closer.

  • @zachary3777
    @zachary3777 8 ปีที่แล้ว +19

    my asphalt driveway has about 12 inches of extremely compacted gravel under it and it hasn't cracked in 15 years.

    • @ronthomas7218
      @ronthomas7218 8 ปีที่แล้ว +6

      12" of base that's why it has a solid base so it doesn't move and crack

    • @Dirtmonkey
      @Dirtmonkey  8 ปีที่แล้ว +5

      Solid😄👍

    • @Dirtmonkey
      @Dirtmonkey  8 ปีที่แล้ว +3

      +Ron Thomas yes👍👍

    • @Moe7133
      @Moe7133 7 ปีที่แล้ว +4

      Bottom line, you pay for what you get. If your cheap and you try to cut corners then you will end up repairing it shortly. If you got the extra $$$ and you pay more to do a correct job, you'll never have to repair it for a long time.

    • @ThePsicocat101
      @ThePsicocat101 7 ปีที่แล้ว +1

      12 inch is minimum atleast here in europe i did put 20 since i have 35 tons truck driving over it on daily basis

  • @_presbeuo_m4773
    @_presbeuo_m4773 7 ปีที่แล้ว

    Great info......thanks for sharing.

  • @lifeisgood070
    @lifeisgood070 7 ปีที่แล้ว

    My experience is always deepen the base material as much as possible within reason. It amazes me people think 4" is realistic. It's realistic for about 2 years.

  • @alfonsotapia5251
    @alfonsotapia5251 8 ปีที่แล้ว +1

    We need to show this video to the customers since they always think we just want to over charger for more base and concrete. "Do you offer a guarantee" you say yes I guarantee that it will crack not right away but it will

    • @Dirtmonkey
      @Dirtmonkey  8 ปีที่แล้ว +1

      LOL- Very true!

  • @SinnerSince1962
    @SinnerSince1962 4 ปีที่แล้ว +3

    $12-24 per square foot. Wow. I can't imagine how much money my 80 ft long driveway would cost. About $20 grand at $20 a square foot. There goes my Harley money again.

  • @matthewmeek4289
    @matthewmeek4289 8 ปีที่แล้ว +6

    Crack sealing for asphalt and concrete hands down is the best contract job you can get. You can rent a crack sealer for about $300 a day buy about $500 of material, two man crew can accomplish a $5,000 job in just 1 day. Best part of crack sealing is you need no tools besides the machine. I would of never been able to break the 6 figure profit mark without adding crack sealing to my services.

    • @Dirtmonkey
      @Dirtmonkey  8 ปีที่แล้ว +1

      I never realized it was that profitable.

    • @mordyfisher4269
      @mordyfisher4269 7 ปีที่แล้ว +1

      Matthew Meek same here, i only work 100 days a year now

    • @khakhananglastname745
      @khakhananglastname745 5 ปีที่แล้ว +1

      I can't believe people throw their money around like that. My 3,200 sq. ft. driveway is being done (6" base material and 3" of asphalt) for not much more than that. I'd either do the crack sealing myself, or I'd wait for the entire driveway to fail and then replace it.

    • @xtra420
      @xtra420 9 หลายเดือนก่อน

      What the heck are you renting

  • @pvroeg8539
    @pvroeg8539 7 ปีที่แล้ว +1

    Thank you. That was very helpful! :)

  • @Phenom-rl5pr
    @Phenom-rl5pr 4 ปีที่แล้ว

    Excellent video, so 6" concrete would best prevent cracking correct

  • @owningit625
    @owningit625 8 ปีที่แล้ว

    I would be ecstatic if you put out a good tutorial on all of different methods for asphalt crack filling. Especially proper use of the hot melter. thanks very much from a long time subscriber.

    • @Dirtmonkey
      @Dirtmonkey  8 ปีที่แล้ว

      I think Marvin with Westcoat has that video on his channel.

  • @Jennifer-xw7dw
    @Jennifer-xw7dw 2 ปีที่แล้ว

    Hello, great video, Thank you. Re base thickness, do you mean before or after compacting? Which hard surface is best for South Florida so that's heat and humidity - also near a lake so not sure if salt is a factor? Current drive is asphalt (old house) with the crocodile cracks everywhere...

  • @Adam-lu3fb
    @Adam-lu3fb 7 ปีที่แล้ว

    In Calgary, Alberta I'm pretty sure it's a law to have a concrete driveway on any new construction. Literally every house I've seen. I'm not sure how they do it, but I rarely see a cracked driveway anywhere in the city.

  • @carolewalker2039
    @carolewalker2039 ปีที่แล้ว

    I live in Tennessee and wonder is an aggregate driveway better than concrete or asphalt? I have a 90 ft long driveway with gravel on it on a 20 degree slope.

  • @mikesbobcatservicesllc-mic6927
    @mikesbobcatservicesllc-mic6927 8 ปีที่แล้ว +3

    that was a great video thank you

    • @Dirtmonkey
      @Dirtmonkey  8 ปีที่แล้ว

      👍

    • @ivanward6149
      @ivanward6149 8 ปีที่แล้ว

      Mike's Bobcat Services, LLC - Michael Lambrecht f

  • @SciHeartJourney
    @SciHeartJourney 8 ปีที่แล้ว

    Thank you!. I used to work at UCLA and would sometimes drive through the neighborhoods looking at the Million Dollar homes. The best of them stand out when you pass the "paved" driveways. They just immediately make you think that house is much better than the house with a brand new asphalt driveway. That jet black doesn't impress me because I know it doesn't last that long. I think pavers are the only sensible investment if you're going to re-do a driveway at all.
    What is "base material"? So 8" of base material, 8" of concrete and some distance for two other layers; gravel and sand, how much? I didn't see those details spelled out. Thank you for this great advice.
    I was thinking of making my own pavers from cement, and cement coloring. Pavers are expensive. The fancy ones are the most expensive. Is this is an idea I would regret?

    • @Dirtmonkey
      @Dirtmonkey  8 ปีที่แล้ว

      6" minimum of class 5 base. But don't be afraid to up that to 8 or even 10" of class 5 base. Than 1" of sand -but no more than that of sand. To much sand makes pavers subtle shift.

  • @992F
    @992F 8 ปีที่แล้ว

    If you keep your water to cement ratio as low as possible, you will have less shrinkage. Using a good curing compound will also help to minimize rapid evaporation upon initial setup. Finally if you can seal the surface, it will help to keep the concrete looking good.

  • @CHIBA280CRV
    @CHIBA280CRV 2 ปีที่แล้ว

    Fantastic informative video sir.. I have a steep driveway in the north east , would it be okay to have a paver driveway instead of asphalt ? And if so is there a recommendation on any of the sub materials ? And or procedures recommended? Thanks 🙏👍👍👍👍👍

  • @SooluJuju
    @SooluJuju 7 ปีที่แล้ว

    Thanks it was informative