Making Plasma Cutting & Circle Track
ฝัง
- เผยแพร่เมื่อ 11 ส.ค. 2022
- To make this tool I used a 12v motor from car wipers, and electromagnetic locks with a force of 240 kg each. The machine can cut lengths and cut circles, I can cut with this machine with a plasma and a gas burner.
![[FULL EP.12] "นีโน่ - สเตฟาน" 2 หรั่ง แหย่รังมดแดง | เฮ็ดอย่างเซียนหรั่ง | One Playground](http://i.ytimg.com/vi/zLBmzfrx0u4/mqdefault.jpg)
I never thought I'd say this, or that another channel would be able to do it, but you're now #1 moving Made in Poland to #2 in my favorites lineup.
Starting with the content, your insight/designs, the editing, + no loud music, cussing, or talk/talk/talk; even less ads. Imo it's perfect. I hope you never
lose your strength or desire to design/build, or to do what it takes to create these videos that we enjoy so much. *Thank you and God bless.*
Thank you 😁 I try very hard on projects and recordings. I'm glad that there is someone who can appreciate my work 😀 But in my opinion, the guys from "Made in Poland" are in the first place, not only that they do great work, but also they were and are my inspiration, They are also my friends, And Darek's ingenuity knows no bounds 😁
@@WorkshopFromScratch // You are both great at what you do. I'm glad I found Darek's channel and yours as well. 👍👍
@@WorkshopFromScratch My no1. is Mehamozg -there is nobody that does what that man does when it comes to machining crazy tools. But yea your channel is good ,like make it extreme or made in poland .
Prztluacz na Polski
@@romang1778 ???
Brawo! Już widzę pomysł na kozę do grzania wody basenowej. 🐐🔥 Terma zewnętrzna na drewno z pasywnym obiegiem otwartym już od dawna chodzi mi po głowie.
Your are so clever and good, one thing, if you put the sliding or slotted rod on the side of the bushing that gives you adjustment you could cut smaller circles, this build was amazing ,,GREAT JOB my friend, 👍👍👍👍Also I'll put in my order for one.
Damn, brilliantly done! I don’t have the need for it as much as you do, but this is as close to a plasma table as you can get for a portable unit. If you could figure out how to do an X-Y move, you could sell as one. That I could use.
обожаю когда делают , что то своими руками ...сам токарь ! респект !
Всегда смотрю ваши видео очень интересные приспособления изготавливаете 👌
Cool stuff! I wouldn't mind having one of these in my workshop either
I had not expected to see a person build a CNC type of rig . Just a radius tool but you impressed even though I watched to see a clever jig and it turned into a machine that needs its own house. Now I have no idea how to copy it but the cup that holds the handpiece is locked in. May return to check details if I use that idea. 💡? Very cool device. To techy for a man like me but takes nothing from the genius employed.
Ай да мастер! Ай молодец!Долгих лет и успехов тебе!!! Завораживает вся работа!- любо- дорого смотреть!
Invaluable Tool. Best one yet. Love it.
I like your torch mount idea!! It's original and brilliant!!
This is a great build. Very satisfying to see it function so well. 👍
Thank you 😁
That's a awesome build it's hard to believe some of the things you build great work 👍👍
I'm 76 and when I grow up I hope I can be half as good as this guy!!
Great project! Add a "Y" axis and a couple of DRO's you could do some very precise located circles, or even just go a little farther and make a CNC plasma torch. Lots of options. Very nice job!
Again, ABSOLUTELY incredible craftsmanship and ingenuity!! Your work is what inspires me to get in my garage and just build!!
Thank you 😁
B can
Great just amazing precision PCs of engineering and it's made it easy for all interesting people to do it your self. Just a question what r the electronic parts on the that have been installed??? Pls tell us all the items required to make this. Thanks n regards.
Obrigado amigo , frind , tua generosidade em exibir esse projeto é surpreendente .
Muchas gracias
Muito obrigado
Thank you.
Pure and slick. Another great build.
Отличная работа. У тебя золотые руки. Молодец, продолжай в том же духе. Привет из России, Башкортостан.
Brilliant work, dude! Really well done! 😃
Fantastic machine!!!
Stay safe there with your family! 🖖😊
Thank you 😁
Amazing work as always. The idea, design, craftsmanship and video / editing. I just sat down after working in the shop all day, watched your video and it makes me want to go back out there and get some more work done. 👍 (But I think I'll stay in and watch some more videos instead.) 😛
Thank you 😁
Very good job! Videos like this give me motivation. Excellent craftsmanship!
Dang, I already started building my portable cnc plasma. 🙁Wish yours was out when I started. Great job.👍
Great content. You inspire me to make more videos of my projects!
I don't know what to say...
this channel is soooooo great ...it makes me to feel happy and initiate me
love you brother...💚💚💚
Ty jesteś niesamowity !!! Jak nie robot koszący teraz to ! . czym nas jeszcze zaskoczysz kolego 😃 świetna robota pozdrawiam
Dziękuję 😁
Good to see your machine is working Great. Last cut i.e. both side radius and straight in the middle, detailed video is preferred. You can try belt drive and see if the smoothness of the cut is improving.
Overall, this is a highly informative and enjoyable video for anyone interested in engineering. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
Very impressive.
I think I was most impressed by your wiring.
Very professional.
How do you make it choose between circles and ovals?
straight lines are cut using the hand crank wheels
Все 10 пальцев в верх.
Красивая работа. Молодец!
Sensacional, incrível! Um belo trabalho! Este projeto, nós aqui no Brasil temos condições de fazer, porém, o custo fica muito elevado, devido aos altos impostos em cada peça! Mas, acredito que pra vocês o custo na finalização do projeto sai mais barato, do que aqui para nós! Por isso, achamos incrível seu projeto! Um belo trabalho! Saudações do Brasil!
Зачем использовать дорогие запчасти, упрости, ну без плазменного резака не обойдешься, а без длинного вала с резьбой и шлифованных валов обойтись можно, взять две квадратные трубы 20х20, вместо дорогого резьбового вала, монтажную резьбовую шпильку с резьбой 12 или 16 мм и к ней привод из моторчика от дворников, вручную не надо будет крутить горизонтальное перемещение. Моторчики от дворников, взять с автомобильной свалки.
Excellent my brother, my heart became happy after seeing your work. I love ❤️❤️❤️ my country from India 🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳
Amazing idea. I really appreciate your technical & professional skill. Thanks for sharing useful idea with us.👍👍👍
Ok. I’ve watched several of your videos. I really like the fact that you know, those (most of us) that watch these fabrication videos are not morons and you make the videos accordingly. None of that thumbs up shit or just beating a point to death or showing several views of something that only needs a glance. Thanks man. It looks like your as good a fabricator as I used to be or possibly even better. I don’t say that lightly. You know how we are, we are the very best and no-fkn-body else will ever be as good🤣! I enjoy your ideas, the method, the editing and content. I think I can safely sub to your channel and not be disappointed. Again thanks.
Очень круто!!!! Золотые руки!!! Залипаю на ваши видео! Так держать!!!
I am always afraid to modify stuff from the factory. You're inspiring me to be braver and take risks.
Isso será muito útil , parabéns pelo trabalho irmao
Bro. Nice work. I have one suggestion. The sprocket rod should have a rod inside that you can lower that would point to the center of the circle then push it back up out of the way to cut. I would imagine with out that setup would be difficult and prone for error. 👍
Magnífico trabalho Chow!! ( Good Job Chow ❤️👏👍🇧🇷)
buen y perfecto trabajo.....soy nuevo suscriptor.....una pregunta.....k marca y modelo es la maquina de soldar....muchas gracias.....from reynosa
nice job making the device, and a nice job on filming/editing.
Тот случай, когда работа впечатляет гораздо сильнее, чем полученный результат :-) Вам совсем немного не хватило, чтобы превратить это в полноценный плазморез с числовым управлением. А круги нарезать можно как-то попроще.
Ну да плазмо рез с такой задачей справляется на ура ..
IT IS VERY INCREDIBLE YOU ARE CREATIVE FRIENDS AND SUPPORTED YOUR WORKSHOP EQUIPMENT IS VERY COMPLETE. THANK YOU FRIENDS YOU ADD MY INSIGHT
Super genial q maravilla de diseño, muy bien explicado el video 👍👍
This is absolutely amazing - Well done as always - With all your clever ideas and first class fabrication you must have the best equipped workshop on TH-cam !
Thank you 😁
@@WorkshopFromScratch You are very welcome :-)
Genial podrias compartir donde compraste las barras y otras cosas medidas necesito algo parecido con 2mts de bancada y inclinación de 45° y solo deslizamiento lineal.
I really like your machine, I'm going to take inspiration from it.
Excellent build, great video man,keep'um coming..
Thank you 😁
Exelente trabajo, esa máquina se le puede dar otros usos , su vídeo es ilustrativo .
Saludos desde Sicuani PERÚ 🇵🇪
Excellent job,God bless you and your hands
Excellent work 👍👍👍 . Thank you for sharing. Take care of yourself, be safe, 🇨🇦
Thank you 😁
Veľmi pekná práca ( Very nice work)
Fantástico 😃,,, adorei esse trabalho...
Мне тоже,но у меня нет такой техники
Every time I see one of these videos, the same thoughts come to mind.
1) I would love to contribute towards getting you guys a proper milling machine.
2) How in the heck can you hand tap so well?! I'd break so many taps doing that freehand.
Its a spiral flute tap. Look closely. They are made for machine taping
Pretty sweet for lines as well, just line up the feet with an offset from the line you want sliced- a bit slow compared to one of those new NC/CNC armatures or an XY table, but it'll get the job done cleaner than by hand!
Thank you so much for these video!!!🤗🤗🤗
Show de bola...👏👏👏👏👏
Ferramentaria com
Excelência....👍
Beautiful work thanks for sharing this
Dude that is so kool, just bought my first plasma cutter I build custom Volkswagen trikes in my spare time & planning on retiring very soon. And I would love to have one of those. Any way to get some type of plans? G
A commendable job ,
Factories can learn from you
Just amazing - And I know you use 'these tools' in future projects, so I'm looking forward to see you make use of this one - Cheers 👏😊
Thank you 😁
The circle is controlled by the motor and the x axis is controlled by the lead screw hand fed?
Bonjour mon ami, merci beaucoup pour les efforts que vous faites pour nous montrer des belles vidéos comme ça, cait incroyable et intéressant, bravo bon courage et bonne chance, 🙏🙏🙏🙏🙏👈
Well done, it's amazing. Stay blessed
Formidablee proyecto amigo gracias por compartir tus conocimientos ,Dios te bendiga siempre saludos desde Piura Perú
WOW! You really made an excellent job! 😎
Thank you 😁
Anh rất giỏi trong việc cơ khí chế tạo xin cảm ơn đã chia sẻ những chất xám
WOW. I am impressed with what has been achieved. Nice job.🖖😊🖖😊
Thank you 😁
Wow, an interesting thing turned out! And what thickness of metal can he cut?
The video test was made on a piece of sheet metal 8mm thick, my plasma cuts 12mm qualitatively, so it all depends on the quality of the plasma you have :)
Muy bueno tu trabajo amigo, felicitaciones, abrazo desde Tierra del Fuego
hola amigo estoy buscando esos rodamientos liniales me podria decir donde lo compro o compartirme el enlace de donde lo encontró gracias saludos desde España
Nice work, interesting design!
Finish & Clean Work.. Welldone..👍..😍..!
Excellent job done
God bless you
Very nice achievement. Nice work as usual.
Thank you 😁
ÓTIMO EQUIPAMENTO, PARABÉNS.
TEM COMO COLOCAR UM SOFTWARE PARA FAZER CORTES COMO UM CNC?
Excellent work and amazing ideas
So nice, and it's a serious tool, I like it, if I can build one I will be happy, can you teach me
Hi I love the video and the build. I do have one question though, what is that tap, that you are using @3:50?
Excellent work!!
k barbaro.....esa maquina esta preciosa y genial...en cuanto me vendes una ????saludos de reynosa
muy buen trabajo felicidades saludos
Teraz możesz piece CO robić taśmowo... Super wykonane...👍👍
Skąd taki silnik 12V z tą przekładnią kątową ?
@@szwejoo to jest silniczek z wycieraczek z auta.. pozdrawiam
Amazing idea.
I'd add a laser pointer to locate the center of every circle :)
Always awesome! Thanks for sharing
Cheers
Thank you 😁
Parabéns.
Trabalho magnífico e inteligente.
Deus te proteja.
Quanto custaria um equipamento desse, em dólar?
Excellent (as usual!!) Thanks
Simplicity, functionality, and aesthetics.
Great job 👏!
I have few questions, where did your buy your hole saw and your thread tap? And why are you not cutting metal plate with plasma?
Thank you 😁
Hole saw:
www.ebay.pl/itm/353270793290
thread tap
www.kingtony.com.pl/uchwyt_12_do_gwintownika_6-12mm_20522.html
Maravilhoso good 😃 muito bom 😊 !!!
Your mechanical work is very useful brother
Thank you 😁
That turned out very nice, on the to do list.
Thank you 😁
Молодец отличная работа !
Sensational, congratulations!
Will go CNC be your new equipment's next step?
Super mjeshter i talentuar respekt.
Hello, nice project as always, can you tel me where you bought your taps and the tap holder please, thanks.
Thank you 😁 I will not recommend the one I use because I want to exchange it for one myself www.kingtony.com.pl/uchwyt_12_do_gwintownika_6-12mm_20522.html
Muito bom o vídeo!
Маэстро!! Спасибо, класс.