I built a custom pedal for one of the US Wangs distributors a few years ago. I asked him if I could get them to make me a signature series that I would call the "Massive Wang."
@@wangsampsI took a job a while back as an engineer on a MASSIVE project, and it killed my time to do pedals. I'm about to finish up this project then I'll be full swing with pedals again. I did use all this "downtime" to design a ton of new circuits, so when I get going again I'll have a ton of new stuff. I knew working these 70-80 hour weeks wouldn't give me time to fill orders fast enough, but I'm dying to ramp up again. I'll definitely hit you up!
@@wangsamps thanks, bro! If you saw under the board, you'd really flip out over how I mount all the dual gang concentric pots to the board. They are all soldered to a daughter board then the daughter board is connected to the main with ribbon cables (or it might be individual wires, I did that for the first few) If you try, just be warned it's a pain to line it all back up again lol the one you have was an earlier version and I was using the much more shallow 1590bb enclosures. I love their smaller size, but I now use a 1590bbs which is about twice as deep.
Since i was a kid i loved playing with my Wang, i'd play with my Wang in the morning, noon and night...I even played my Wang in front of my parents! Heck i got caught playing with my Wang at school because i was a bit loud with it! So folks, never be afraid to play with your Wang, even in front of people, because they will one day, pay you good money to see you playing with your Wang! 😉😁
I have a Wang's VT-5 Tube amp. I don't know when it was made or if it was made for the US market. I took off the back panel to change one of the tubes and the fuse. When I did that I noticed on the side of the on /o 6:58 off switch is written 5 amp 250 volts. I'm confused because it has a three prong power cord connection for regular American wall outlets. Does anyone have any suggestions or comments, I don't want to damage the amp by plugging it into the wrong power source.
I got it second hand and I have not connected it to my guitar yet. When I got it I took off the back panel first to see what it looks like. It didn't have a power cord and one of the tubes was burned out. The fuse looked like it needed to be changed. I noticed at that time that 5 amp 250 volt was written on the on off switch underneath. I put a new 6v6 gt tube and a new fuse. The cord connection is three prong and I bought a new cord that fits in perfectly. But I'm not sure if this amp was made for the US market. Other than what I did to it the amp is nice it's very well made. When I got it I wasn't given any history on it it looked nice and I bought it cheap without knowing anything about it. It's a nice amplifier and I don't want to damage it by improperly using it. I don't know how to add photos to show what I'm seeing.
I've had mine for a couple years now and I am still amazed every time i turn it on. I would go so far as to say it better than the Marshall it is based on because even they didn't make them like this in the 70s/80s and with these parts. Im actually tempted to buy another one with the discount code! 🤷♂️
The biggest question about amps is: How is it grounded? Is it soldered directly to the chassis, is it clipped on or is it screwed down? If the ground isn’t soldered to the chassis it will need work.
question: I was wondering about attenuation pedals. Not all amps have a way to play at bedroom levels so wondering if the pedals, EHX make a pedal and JHS have a black box, but do they work well as part of a chain? Would Master volume be a better option? I think with the living arrangements of people this could be a good show or couple shows to address this.
I have three Bugera amps: A V22 Combo, a V55 head, and a 6262. There is not a thing wrong with these amps. I think they finally got the bugs worked out. Mine are great.
This is an edited version from DBG…You can view the original video at Darrell Braun Guitar on YT th-cam.com/video/ZhFdC1jC2lM/w-d-xo.htmlsi=a3niwUFYNdLofarE
I have 3 Wangs. My wife is very happy about this. 😂 The Mini 5, OD-30 and 2024. By far best amps in their price range. The 2024 replaced my chinese built. Marshall. Unless the tube manufacturers all go under, I don't see myself replacimg these amps anytime soon.
@@wangsamps yeah, fall of 2022. I met a great lady after my ex and I split and after 3 years of her helping me through divorce hell, I got married again. The fact she stuck around with all the BS my ex was putting me through, she's a keeper. 😂
@@wangsamps and I'm not surprised you had to change FB profiles. Are your fans still as adamant about keeping Wangs amps unknown to North America? 😂 I'm not there much, but now that divorce is over I'm gradually going back in limited amounts. Now that home renovation are done on the main floor I'm beginning to reclaim my music room.
The folks at Biyang/Wangs are very gracious, honest, generous and Humble. I’ve worked for them since 2012 and have never once had a negative experience. Even when something goes wrong they show Ernest concern and remedy any issues quickly. They are my good friends and family.
Premier guitar magazine did a review of these amps years ago but here in LA no body has them and i don't buy gear without getting my hands on it my only issue would be the tranformers china makes crappy transformers but these amps look pretty good !
Vintage Guitar Magazine also did a great full page review. Transformers are hand wound in house. Only transformer issues were in Mini5 because some housings were touching outer-weave but issue was resolved. Unfortunately Mini5 is temporarily discontinued due to component supply chain problems with EU.
@wangsamps verry good I'm always happy to see new company's get into the tube amp business I hope you do well I collect old marshall plxi amps and like seeing others that make affordable versions and it's fun best of luck cheers !
@@wangsamps Ah I see, Wong & Hwong! Why not just spell it that way in western alphabets? Cos in English Wang rhymes with bang! Time to update the Pinyin! Xie xie!
This is INSANELY well put together!
🤝🙏☮️
Putting a Legendary Tones Mr Scary mod into this amp turns it into an absolute high gain beast.
I’ve been hearing a lot about this lately.
I should get one and give it a try
There was a computer company in the 70’s-80’s named Wang and their slogan was “I love my Wang”.
I remember that company but didn’t know their slogan. That’s actually pretty 😄 funny
That was a smart move showing a gutshot of the amp...after that gibson "handwired" fiasco buyers want to see what's under the hood
The Candy Store concept
I still have and like my Wangs HD-30 head.
🙏🤝☮️
Just ordered one exactly like this yesterday. Really looking forward to getting it.
Each amp is built to order and ships direct.
Expect 20 days delivery to your door from date of purchase
I have been using one for years. Great amps
🫡
I built a custom pedal for one of the US Wangs distributors a few years ago. I asked him if I could get them to make me a signature series that I would call the "Massive Wang."
The MothMan 🤝
Your demos are on this channel
@@wangsampsI took a job a while back as an engineer on a MASSIVE project, and it killed my time to do pedals. I'm about to finish up this project then I'll be full swing with pedals again. I did use all this "downtime" to design a ton of new circuits, so when I get going again I'll have a ton of new stuff. I knew working these 70-80 hour weeks wouldn't give me time to fill orders fast enough, but I'm dying to ramp up again. I'll definitely hit you up!
@@Blinkerd00d
Good to be busy.
I loved you used all WIMA and Philips inside.
It’s beautifully done
@@wangsamps thanks, bro! If you saw under the board, you'd really flip out over how I mount all the dual gang concentric pots to the board. They are all soldered to a daughter board then the daughter board is connected to the main with ribbon cables (or it might be individual wires, I did that for the first few) If you try, just be warned it's a pain to line it all back up again lol the one you have was an earlier version and I was using the much more shallow 1590bb enclosures. I love their smaller size, but I now use a 1590bbs which is about twice as deep.
@@Blinkerd00d
The ‘MothMan’ dual drive pedal is awesome! All the modes have very unique characteristics and are super usable.
Still use it 🫡
Brilliant using Daryl, and leaving mention of his his affiliate link in. Classy stuff people.
Since i was a kid i loved playing with my Wang, i'd play with my Wang in the morning, noon and night...I even played my Wang in front of my parents!
Heck i got caught playing with my Wang at school because i was a bit loud with it!
So folks, never be afraid to play with your Wang, even in front of people, because they will one day, pay you good money to see you playing with your Wang! 😉😁
You and I had similar childhood experiences 🤭
I have a Wang's VT-5 Tube amp. I don't know when it was made or if it was made for the US market. I took off the back panel to change one of the tubes and the fuse. When I did that I noticed on the side of the on /o 6:58 off switch is written 5 amp 250 volts. I'm confused because it has a three prong power cord connection for regular American wall outlets. Does anyone have any suggestions or comments, I don't want to damage the amp by plugging it into the wrong power source.
@@Skhufu
How long have you been using it in USA ?
I got it second hand and I have not connected it to my guitar yet. When I got it I took off the back panel first to see what it looks like. It didn't have a power cord and one of the tubes was burned out. The fuse looked like it needed to be changed. I noticed at that time that 5 amp 250 volt was written on the on off switch underneath. I put a new 6v6 gt tube and a new fuse. The cord connection is three prong and I bought a new cord that fits in perfectly. But I'm not sure if this amp was made for the US market. Other than what I did to it the amp is nice it's very well made. When I got it I wasn't given any history on it it looked nice and I bought it cheap without knowing anything about it. It's a nice amplifier and I don't want to damage it by improperly using it. I don't know how to add photos to show what I'm seeing.
Send me photos to WangsAmpsUSA@gmail.com
Send photos to WangsAmpsUSA@gmail.com
@
Send pics to WangsAmpsUSA@gmail.com
I've had mine for a couple years now and I am still amazed every time i turn it on. I would go so far as to say it better than the Marshall it is based on because even they didn't make them like this in the 70s/80s and with these parts. Im actually tempted to buy another one with the discount code! 🤷♂️
🙏
The biggest question about amps is: How is it grounded?
Is it soldered directly to the chassis, is it clipped on or is it screwed down?
If the ground isn’t soldered to the chassis it will need work.
There is a metal plate that covers the entire chassis and is grounded by the four screws holding the chassis to the enclosure
@@wangsamps so, not soldered down?
question: I was wondering about attenuation pedals. Not all amps have a way to play at bedroom levels so wondering if the pedals, EHX make a pedal and JHS have a black box, but do they work well as part of a chain? Would Master volume be a better option? I think with the living arrangements of people this could be a good show or couple shows to address this.
I just use the volume knob on my boost pedals
I have three Bugera amps: A V22 Combo, a V55 head, and a 6262. There is not a thing wrong with these amps. I think they finally got the bugs worked out. Mine are great.
Sweet! 🤝
Here's this great sounding amp so let me demo it by adding a distortion pedal and reverb, right. Sheesh.
This is an edited version from DBG…You can view the original video at Darrell Braun Guitar on YT
th-cam.com/video/ZhFdC1jC2lM/w-d-xo.htmlsi=a3niwUFYNdLofarE
I have 3 Wangs. My wife is very happy about this. 😂
The Mini 5, OD-30 and 2024.
By far best amps in their price range. The 2024 replaced my chinese built. Marshall. Unless the tube manufacturers all go under, I don't see myself replacimg these amps anytime soon.
I have a new FB profile JK
You got remarried?
@@wangsamps yeah, fall of 2022. I met a great lady after my ex and I split and after 3 years of her helping me through divorce hell, I got married again. The fact she stuck around with all the BS my ex was putting me through, she's a keeper. 😂
@@wangsamps and I'm not surprised you had to change FB profiles. Are your fans still as adamant about keeping Wangs amps unknown to North America? 😂 I'm not there much, but now that divorce is over I'm gradually going back in limited amounts.
Now that home renovation are done on the main floor I'm beginning to reclaim my music room.
@@thisdyingsoul76
Nice! I’m so glad you are happy 😃
You can find my profile easily my pic has a 177 badge
@@wangsampswhat happened to the old profile? Did your FB fanclub get you banned again? 😂
Ive always wanted one. Any good European retailers. Looking to get one in france
Wangs builds each amp to order and ship directly from factory.
You can purchase directly from factory at
wangs-amps-usa.myshopify.com/
The questions on their website are great. The seem very nice an humble.
The folks at Biyang/Wangs are very gracious, honest, generous and Humble. I’ve worked for them since 2012 and have never once had a negative experience. Even when something goes wrong they show Ernest concern and remedy any issues quickly.
They are my good friends and family.
@@wangsampsdon’t you mean even when something goes wang
@@wangsamps That is great to hear. One of these days I'll get my hands on one of the amps =) They've been on my radar, so to speak.
I have a Wangs VT-1H, it is excellent and I hope to get a 1987hw in the future. Easily the most bang for your buck with these amps.
I have one and it's awesome, and very reasonably priced.
🤝 🙏 ☮️
I always wash my hands before playing my guitars but I never worry about washing them after handling my Wang.
😂
You got the name Wong.
But it feels so wright
Rame jokes. I rove it.
😄
I play with my Wang frequently and for long lengths of time.
Do they make a combo amp or just heads
3 combos in the Vintage Tube series
VT-5 (3/5w 70’s Champ style) 8” speaker
VT-10 (5/10w JTM ) 10” speaker
VT-18 (1/5/18w Deluxe) 12” speaker
Does the amp have an attenuator?
No, it is a purists amp or what’s called a ‘vintage simple circuit’
They should do an amp with Red bull.
Or Bawls.
It gives you Waaaangs! 😂
I would have started with a clean volume tone.
This is an edited version of a much longer video. Pls see the original version at Darrell Braun Guitar channel.
Premier guitar magazine did a review of these amps years ago but here in LA no body has them and i don't buy gear without getting my hands on it my only issue would be the tranformers china makes crappy transformers but these amps look pretty good !
Vintage Guitar Magazine also did a great full page review.
Transformers are hand wound in house. Only transformer issues were in Mini5 because some housings were touching outer-weave but issue was resolved. Unfortunately Mini5 is temporarily discontinued due to component supply chain problems with EU.
@wangsamps verry good I'm always happy to see new company's get into the tube amp business I hope you do well I collect old marshall plxi amps and like seeing others that make affordable versions and it's fun best of luck cheers !
Wang & Wong are 2 different names!
Correct 👍.
But….Wang pronounced Wong is not
@@wangsamps Then how do you pronounce 'Wong' ?
Hwong
@@wangsamps Ah I see, Wong & Hwong!
Why not just spell it that way in western alphabets? Cos in English Wang rhymes with bang!
Time to update the Pinyin!
Xie xie!
@@DMSProduktions
Wangs Amps were never intended for the western market. They are here by fan demand alone.
Hao la!
i love mine
🫡🙏🤝
Wang hung lo...
If its WONGS why is this dude saying WANGS?
He corrected himself after reading the website about 2 minutes in
this amp is second on my short list ...number one is more money lol
What's the price tag on this sucka?
$900 with 30 day warranty
$1,100 with 12 months (no questions warranty)
Its not a Wongs. You know how to pronounce it.. go ahead.
Something’s terribly wang about this.
🔌😜
Its a cheap copy of an Egnater tweaker 15 amp. Something nobody wants to buy.
I’m a big fan of Bruce and we have introduced ourselves but why would you believe this handwired 50w 2204 circuit is an Egnator tweeker circuit?
Yeah, a 50 watt, single channel Egnater Tweaker with one type of tube and rectifier... look at the big brains on Brad
🤷♂️
Just can’t get onboard with a Chinese made amp. Or anything Chinese, except fried rice….
Found the racist.
All the companies are getting acquired by the conglomerates. Usa amps? Mesa was bought by gibson. Idk. Wait till you see a Korean rec.
@@mooseymoose. Xi would approve of your comment. 😵💫