Thank you for the whole of the knowledge you have given for free a commendable thing to do iam a beginner learning the flute and I couldn’t play C scales and following your wonderful instructions I am now able to do so your knowledge is priceless to people who are brave enough to attempt it but if you’re not confident enough it’s maybe not worth attempting incase of damage but follow carefully. Again thank you for giving such wonderful knowledge
Thanks a lot for putting together this video! Had a small leak in exactly the same front spot of the Eb key in your video. Was trying to figure out a good way to slightly bend the key to level it, and your cardboard method worked great! Thank you! 🎶
What do you think about this method opposite of placing little paper shim under pads? Your method avoids of deassembling the pads every time. Or are they complementary methods?
You would use the shimming method on professional model flutes. On student and intermediate flutes, you can do it either way. Sometimes, you use both methods on the same flute if there is a reason to do so.
There are a few ways to deal with that. First check to see if the tone hole is level and check to see if the pad is bent. You can try partial shimming, or just put the pad leveler under one of the high spots and then the other until it is level. I hope this helps.
concerning the cardboard leveling tool you made, is there any reason why you couldn't just use a small thin piece of metal or even a pad slick instead?
@@TheBrassandWoodwindShop Thanks Leveling the key cups seems to make more sense Are you familiar with the set of key cup leveling tools Ferree’s sells There are three sizes in the set. Is the folded cardboard your only method of leveling tone holes? Also where are you located? I have a shop in Brooklyn NY and am getting more flute repairs these days. I find your videos the most informative of all the videos on repairs. Thanks for posting.
Hello Ruben, I have only used the cardboard so I am not sure how the Ferree's tools work. My shop is in Burnt Hills, NY about 20 miles north of Albany. Feel free to stop by if you are ever in the area.
@@TheBrassandWoodwindShop Hello Art, It seems that leveling the key cups on a flute makes the most sense. Shimming works also but I find that sometimes I have so many shims in the cup after a while so I just take them out and start over. the fewer shims the better is the way I feel. If I'm ever in your neck of the woods I would love to stop by and meet you and see your shop.If you are ever in Brooklyn stop by Im in Carroll Gardends 3 stops on F train from the city. love the videos ruben
Wrong do not bend the keys ever very silly repair you should but chims under the pads and use indentation clips and heat you key bender repair man😂😂😂😂👍
Thank you for the whole of the knowledge you have given for free a commendable thing to do iam a beginner learning the flute and I couldn’t play C scales and following your wonderful instructions I am now able to do so your knowledge is priceless to people who are brave enough to attempt it but if you’re not confident enough it’s maybe not worth attempting incase of damage but follow carefully. Again thank you for giving such wonderful knowledge
Thanks a lot for putting together this video! Had a small leak in exactly the same front spot of the Eb key in your video. Was trying to figure out a good way to slightly bend the key to level it, and your cardboard method worked great! Thank you! 🎶
I don't think I have the words for which to express my thanks for sharing these tutorials with us.
Thank you very much, Art. I will try this today. I've bent and shimmed my flute keys for awhile now, but not with this much accuracy.
Can I level pads if they already have indentation?
Thankyou so much. I didn't know about this technique. I really appreciate you sharing your knowledge.
While playing the flute, probably because of the heat, the sound disappears due to bad compression of the pads. How to fix it?
What do you think about this method opposite of placing little paper shim under pads? Your method avoids of deassembling the pads every time. Or are they complementary methods?
You would use the shimming method on professional model flutes. On student and intermediate flutes, you can do it either way. Sometimes, you use both methods on the same flute if there is a reason to do so.
Awesome video, thanks! Do you have a special technique for pads that sit front and back, but are open on both sides?
There are a few ways to deal with that. First check to see if the tone hole is level and check to see if the pad is bent. You can try partial shimming, or just put the pad leveler under one of the high spots and then the other until it is level.
I hope this helps.
My flute pads have a screw in the middle except the trill, c keys
Very helpful and confident
Awesome tutorial!
concerning the cardboard leveling tool you made, is there any reason why you couldn't just use a small thin piece of metal or even a pad slick instead?
That is what you do with saxophone pads, but flute tone holes are very thin and are dented easily.
Do you have a video on how to "seat" new pads on a flute?
I am hoping to do a video on this in a few weeks. I am not sure exactly when, but it should be on a Wednesday when I do woodwind videos.
where do you purchase your key pads? i saw a set on amazon but i would rather be able to see them before i spend money
Feree's Tools is a great source for instrument supplies and tools
Thank your for sharing about your technique!
This is brilliant, thank you so much.
Hello
do you ever use shims to level pads?
I do sometimes, but I usually level the pad cup. Some people only use shims. both ways work.
@@TheBrassandWoodwindShop
Thanks
Leveling the key cups seems to make more sense
Are you familiar with the set of key cup leveling tools Ferree’s sells
There are three sizes in the set. Is the folded cardboard your only method of leveling tone holes? Also where are you located? I have a shop in Brooklyn NY and am getting more flute repairs these days. I find your videos the most informative of all the videos on repairs. Thanks for posting.
Hello Ruben,
I have only used the cardboard so I am not sure how the Ferree's tools work.
My shop is in Burnt Hills, NY about 20 miles north of Albany. Feel free to stop by if you are ever in the area.
@@TheBrassandWoodwindShop
Hello Art,
It seems that leveling the key cups on a flute makes the most sense. Shimming works also but I find that sometimes I have so many shims in the cup after a while so I just take them out and start over. the fewer shims the better is the way I feel.
If I'm ever in your neck of the woods I would love to stop by and meet you and see your shop.If you are ever in Brooklyn stop by Im in Carroll Gardends 3 stops on F train from the city.
love the videos
ruben
Thank you very much!!!
I'm tuned a flute that co-lieutenant eternal health video
Wrong do not bend the keys ever very silly repair you should but chims under the pads and use indentation clips and heat you key bender repair man😂😂😂😂👍