BEST DARK T-SHIRT TRANSFER PAPER ?! PPD vs AVERY vs MORE! + WASH TEST! || Lucykiins
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- Last week, I compared LIGHT inkjet transfer paper brands and this week I'm comparing the DARK transfer paper version of those brands as well! I tested how they printed, cut, pressed, and even washed! And of course I had to use a picture of my faves BSB ;) Hope you guys enjoy ♥
Don't forget to SUBSCRIBE for more VIDEOS in the future !
XOXO, Lucero Tapia ♥
FOLLOW ME ♥
/ lucykiins
/ lucykiins
Tiktok: lucykiins
________________________________________________________________
* BEST LIGHT T-SHIRT TRANSFER PAPER ?! video - • BEST LIGHT T-SHIRT TRA...
PRODUCTS MENTIONED:
Avery Heat Transfers for Dark Fabrics - amzn.to/3xL0H65
Photo Paper Direct (PPD) Inkjet Dark Transfer Paper - amzn.to/3NkpOCB
www.photopaper...
StarCraft Inkjet Printable Heat Transfers for Dark Materials - mycraftsource....
Nufun Inkjet Heat Transfer Paper for Dark Fabrics - amzn.to/3n46f6U
Canon Pixma MG3620 Printer - amzn.to/3WL6pPW
Black Long Sleeve Shirt - www.heattransf...
Walapress Drawer Clamshell Heat Press - www.heattransf...
Cricut Portable Trimmer - amzn.to/39EFEKL
Great sites for HTV & more:
Heat Transfer Warehouse - bit.ly/41Qb0mO
My Amazon Storefront - www.amazon.com...
Heat Press Nation - www.shareasale...
Expressions Vinyl - www.shareasale...
Teckwrap Craft Vinyl - teckwrapcrafta...
Use coupon code LUCYKIINS10 for $$ off Teckwrap
________________________________________________________________
Earn cash back from just shopping ! For real, RAKUTEN is the shit !!!
www.rakuten.co...
________________________________________________________________
PREVIOUS VIDEOS:
Best Light T-Shirt Transfer Papers
• BEST LIGHT T-SHIRT TRA...
Teckwrap Craft HTV Review
• TECKWRAP CRAFT HEAT TR...
Recreating a Vintage Mickey Sweatshirt
• RECREATING A VINTAGE M...
____________________________________________________________
BUSINESS INQUIRIES: lucykiins@aol.com
FAQ:
Camera I use - Canon 80D
Editing Software - Final Cut Pro X
*Greenscreens by JanTube Editing
*some links may be affiliate
![ไปอยู่ไสมา - ช๊อปเปอร์ โตเกียวมิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/sWuVNbRTJbc/mqdefault.jpg)
![ง้อ (ALRIGHT) - FOURTH [ TEASER ]](http://i.ytimg.com/vi/ya6MBfo-Wvg/mqdefault.jpg)
Ladies and gentlemen, THIS is how you make a comparison video. Your attention to detail and play-by-play is outstanding! Super informative….
THANK YOU SO MUCH !!!! this is so sweet of you to say 😭😭❤️
100% agree Jim Carbonetti! This is the BEST comparison video i have seen in a very long time! Great Job Lucykiins! Also, you may be able to eliminate that ruffling from moisture if you give the shirt a 10 second press prior to pressing the transfer. Notice all the other ones did not have that issue because the prior presses eliminated their moisture. Thank you for posting this video!
thank you soooo much ❤️❤️❤️
i actually did pre-press the shirt before starting 🙃
I've used it before on Avery and I've never had that problem back was always easy to remove
✨ BEST *LIGHT* T-SHIRT TRANSFER PAPER ?! th-cam.com/video/MSL2FAuoVEo/w-d-xo.html ✨
Your videos are amazing and very informative thanks for all this super valuable info. Learned more here than almost anywhere else lol.
haha thank you so much ! so happy you found this helpful 😁😁
I actually like how they're spaced out like that. Could make a cool shirt design.
ironically i saw an NSync shirt like this and got inspired lol.
@@lucykiins Hey thanks for the video! Really helping me start up my tshirt line for my drag tshirts I’m making for my merch line!
awesome ! i'm glad i could help 😊
Dope review love how consistent you kept everything well done
thank you so much 😁
Excellent comparison! I am new to HTV and this is a BIG help!
so happy i could help 😊
Wow!!! This is the best review video.. It helps me a lot. Thank you for this. I am not fond of watching too long youtube review video.. but on this one, I really stayed to watch the whole thing.
thank you so much !!! i’m glad it didn’t bore you 😅
Wonderful job, you’ve done an excellent comparison! Thank you!❤ StarCraft it is!
thank you so much 😁
YOOOOO!!! GREAT Video! for me i had tried the Avery brand previously and to me, the white background ended up like turning brown and like transparent? IDK I must have been pressing too hard or something because it didn't come out nearly as nice as your did! That's the difference between a pro and someone who just does it here and there XD.
I will definitely buy starcraft next time!
Alright Homie, that's it for today! Can't wait for whatever next video you end up cooking up!
haha thank youuuuuuu ! but i'm definitely not a pro at all 🤣
I would recommend an image that looks exactly the same throughout because I couldn’t really tell if it was the quality or the fact that the light is focused on top of the artists as opposed to the bottom. A photo where the lighting is consistent would make it more fair as well.
in person you were able to see the difference in quality between them all even though they weren't exactly the same. the cut off of the clothes is what made me see if the colors were consistent or not 🤗
Absolutely great comparison
thank you so much 🥰🥰🥰
Thank you very much for your thorough and honest review! Very useful information. You are AMAZING!
Thank you for the video it was nice to see the compare I was thinking of doing something like this for a while to find which I like best. Most of mine look good at first but after washing some crack and wrinkle faster than others. I do use cold water however I have put them in the dryer at delicate setting. I may have to try laying them out they are just thicker cotton shirts so they could take a long time to dry.
i think air drying is definitely the way to go !
I have a question. When printing letters on dark transfer do you need to cut out each letter before transferring? I'm trying to figure out how to do it if there is white space between
i think it's always best to cut out each letter. even if there's no color on that part of the transfer, i feel like the film of the transfer will always press through and it'll be textured like the rest of the transfer. i hope that makes sense lol.
Star craft does come in package of 10. I buy them all the time. AVERY IS VERY HARD.
yeah, i just got single sheets to try them out before committing 😊
hi there! love the video! quick question, how did the papers behaved after washing the shirt many many times? I have used Avery for dark colors and after many many washes the colors of the design ironed on start to fade.... I wonder if it's because I am using hot water in the washing machine? I am curious to see what your experience is :) looking for dark colors iron on paper! thank you :)
i haven't really compared how it looks now to the original since i've only washed it a few times, but i do plan on making a video comparing how all of my shirts with transfer papers look now!
i think the fading has to do with both the paper and water temp. try to do warm water instead. even with changing the temp, i still think it'll slowly start to fade either way because of that particular paper.
I do this with PPD and it does go onto the t-shirt well. However both time i have done it i did 375 heat at 30 seconds and then second 60 second but when i have washed both of them 30 degrees, inside out - it comes off! any ideas?
the only thing i can think of is that they probably didn't have enough pressure.
Was ur problem is the perssure because Iv had same problem
The picture don't stayed it peel off
I knew I would like your voice that’s why I’m here
haha thank you so much ☺️
Thanks for this video also! Did you notice a noise issue with any of the dark transfers as you pointed out in the light transfers? I want to take that into consideration before ordering any transfers. Thanks again.
i still have and use this shirt and i don't think any of them have really stood out to me by being too noisy. i think they're all just your typical transfer noise for these 😅
Can you connect them? Make it look like one graphic? Because I have a small printer.and only do black shirts.
yeah, just print it as a normal picture 😊 i cut it up since i was using 4 different brands.
@@lucykiins thank you 🔥
So with dark transfers you can use on light shirts also? So essentially you don’t need to buy other transfers for whites or greys ect?
correct. but sometimes the light transfers work way better than the dark transfers from the same brand.
excellent comparison test, big thank you ... well done
thank you so much 😁
excellent break down..
thank you so much 😁
have you used transfer tape with any of these? i am having an issue with using transfer tape sticking to the design and the design not ironing on. my designs often require transfer tape due to details not being connected in one piece
i've never used a mask with these, but do you let the image fully dry? that might be what's causing it. try giving it a whole day to dry 😊
@@lucykiins okay!
What about Siser EasyColor DTV, can be used on both.
those are next on my list to try out !!!
Hi can u help , when I print an image that has color on it with dark transfer paper and then was the shirt later the color seems to run on the image , any ideas why ? Thanks
did you let it sit 24 hours before getting it wet ?
@@lucykiins yeah was sitting for days before I washed it and the red lettering leaked onto the rest of the image. Thanks for the reply 👍🏻
Wait have you tried paropy dark pro or the Neenah 3g?
no i haven't 🙈
@@lucykiins okay thank you for responding, I only ask because I’m doing my research and am close to upgrading my supplies I am thankful for this video because I’m finding out about different papers.
Great!!! comparison video.
thank you 😁😁
Have you done a stretch test? I'd like to see how they hold up.
these aren't meant to be stretched so any major stretching will create cracks on the transfers.
@@lucykiins I feel like most prints will Crack, even from printful, but they still look almost as good when they return to shape. I'm just wondering if these start to peel in any major way, or ruin it completely.
@@lucykiins if you say this , how do you feel about a lot of other TH-camrs saying to stretch it a little after pressed to help it last longer
you should stretch it a little after pressing, but i mean like a full on stretch. like if you hold the shirt from the sides and do a full on stretch they're gonna crack lol.
Can you use transfer paper? For example on images that are print then cut?
like a transfer mask ? i'm sure you can since that's what the masks are meant for, but i'm not sure how each of these would work with them.
Very nice and informative.
thank you 😁☺️
How many time is it washable
each brand is different, but i don't think transfer paper survives a ton of washes.
Which was the softest? With PPD it feels so thick and stiff to me.
Can you please do a video comparing the dark transfer papers of Neenah 3G OPAQUE, NEENAH JETPRO SOFT STRETCH and Neenah Jet Opaque. Neenah is one of the top selling heat transfer papers and I’d like to see the difference between all 3, haven’t seen a video on TH-cam comparing them all
i honestly don't remember 😫 but transfer papers always have a feeling to it since it is paper you know.
i actually bought 2 Neenah transfer papers, but i don't remember exactly which ones they are. the only reason i didn't use them for these comparisons was cuz i couldn't find a "light" and "dark" version. one of the ones i bought is intended for polyester shirts and i knew that wasn't what i was looking for.
hi can you please tell me if they make clear heat transfer paper for inkjets printers? thank you
hi, i don't think so. i've only seen regular transfer paper.
@@lucykiins ok thank you for replying back
The colors are fading after washing , why is that ....any tips
did you let it sit for 24 hours before washing ?
can you use a regular home ironj?
you can, but make sure it's without steam. a press will give you better results though.
Great review! I've only used Avery and it is expensive so I will try Starcraft.
thank you 🤗 i hope you like it !
Hey love are you using regular ink or sublimation ink
regular ink 😊
Love your voice
🇵🇷
thank you ☺️🇲🇽
Thanks 👍
thanks for watching 😊
Did you put this shirt in the dryer?
nope, i let it air dry 🙂
Thanks for the info. BSB made it fun to follow along too lol. KTBPA
haha yessssss 🙌🏼
Was it firm pressure on all?
yes 😊
Can you print with sublimation ink on this paper?
no, these papers are for regular inkjet printers 😌
I used sublmation ink on the ppd.
Did you use sublimation ink
it's regular inkjet ink 😊
How do day feel ? . Paperie or more like htv . I use ninna 3g opaque 2 and it feels nice but it has a paperie sound that I don't like.
they do feel like paper. the sound isn't as intense, but it's still there 🙃
@@lucykiins thank you 😊
You got a bad batch of the Avery. It's not supposed to be like that
i think i did 🙃
Did you use 100% cotton shirt?
yup !
Thanks for the video. StarCraft need to come in bigger sizes. 11x17
imagine ! i wish i could print that large 😫
@@lucykiins Epson 7710 or 7720 printer.
I love you❤
You look like a supermarket owner who always shouts at people walking on the street...!!!
what a random insult 🤣
I'm just going to say what I'm sure everyone is thinking.... please work on how many times you say "like". It's, like... a lot. Other than that, this is a great video! Very well done. 👏
i know, i'm sorry 🙈😅 the valley girl in me has a bad habit.