I solved the hole problem. We will place the points on the plane we created later. And we will open the holes at those points. Don't forget to turn the end condition direction to the opposite side. I hope your problem is solved.
I have facing issue with fillete after draft on 12 hole edges of 12.7 fillet. It doesn't select 2×2 hole on left and right size. More than 6mm fillet can not selected
Heyy. I guess you will need to go to the options under edit feature regarding the hole wizard and then uncheck all the options such as the near side countersink. That would probably help you out
@@naomonkhan2334 how did you manage to aline rocker arms assembly perfectly with camshaft .... when i try to rotate the camshaft some of the rocker arm move vertical .
@@sainathdesai4081 there are problems with the dimensions of few parts. You get interference. I faced a lot of interference during the assembly. So you need to make modifications!
sir please I have issue with my hole wizard say this error "missing data base hole wizard" please do you have any video or link that can help me solve this error thanks
Make sure that under hole wizard, in the options far down. None of the boxes are checked Options: Head Clearence Near side countersink Under head countersink Far side countersink ALL unchecked
In hole wizard, when positioning holes on the drawn points, first click on the plane that he made before, so that the software will use it as a reference plane and you'll have the similar results as him.
![[TH] VALORANT Champions Seoul - Lower Bracket Final - LEV vs TH](http://i.ytimg.com/vi/fyYkI80GG4o/mqdefault.jpg)
I solved the hole problem. We will place the points on the plane we created later. And we will open the holes at those points. Don't forget to turn the end condition direction to the opposite side. I hope your problem is solved.
If you are having trouble opening the holes, you need to remove all the ticks in the options.
which ticks bro
thank you very much
thank you for the tutorials
I cannot fillet the corners after draft.
I have facing issue with fillete after draft on 12 hole edges of 12.7 fillet.
It doesn't select 2×2 hole on left and right size. More than 6mm fillet can not selected
sir these tutorials help me alot.
plz provide me the pdf of complete dimension of allthe parts if engine that you made in tutorials
There is a problem in wizard value it says countersink dia should be greater than 1.5 plzz help
Heyy. I guess you will need to go to the options under edit feature regarding the hole wizard and then uncheck all the options such as the near side countersink. That would probably help you out
@@naomonkhan2334 bro have you reached the rocker arm assembly parts in main engine body ?
@@sainathdesai4081 yes I ve finished those parts. If you have any doubts let me know!
@@naomonkhan2334 how did you manage to aline rocker arms assembly perfectly with camshaft .... when i try to rotate the camshaft some of the rocker arm move vertical .
@@sainathdesai4081 there are problems with the dimensions of few parts. You get interference. I faced a lot of interference during the assembly. So you need to make modifications!
Good approach
it would be better if you provide a pdf of its dimensions
sir please I have issue with my hole wizard say this error "missing data base hole wizard" please do you have any video or link that can help me solve this error thanks
hole dimensions was incorrect please give us correct one as soon as possible
i get that dimension its was
0.3320in
1.5000in
5.6300in
Make sure that under hole wizard, in the options far down. None of the boxes are checked
Options:
Head Clearence
Near side countersink
Under head countersink
Far side countersink
ALL unchecked
In hole wizard, when positioning holes on the drawn points, first click on the plane that he made before, so that the software will use it as a reference plane and you'll have the similar results as him.
you need to select the plane before clicking on hole wizard . if you dont you'll have a cylinder hole cut
@@TloloPlos Thanks bro it worked
Selfish... You are selfish... Person.....
Bcz... You never Attach the drawings for complicated parts