Happened to me tonight. Optiplex 980 working fine, reboot and wouldn't post, numbers 3 and 4 light up, Googled it and found your video. Did exactly as you showed, took memory out and then back in and voila, it worked. Thank you so much for your video, you saved my bacon.
Same issue, led 3 + 4 and beeping, took out the ram and tested them individualy. I found one of them was damaged and took it out, restarted the pc and it worked again. Thank you so much my dude. You are truly a life saver!
I got one of these old systems from a school a few years ago and had it sitting around. I tried booting it up and got a bunch of loud beeps. I reseated the 4 1GB memory sticks and just fired up the system without putting the DVD and floppy drives back in. Success! I reset the BIOS to defaults and disabled the floppy disk. I was able to boot from a Windows 10 USB and install. I realized that the DVD drive was broken when I put it back in so I just just left it and the floppy unwired just to cover the gaps in the front. So far so good.
Thank you soooo much, I did your procedure and YES!! it worked and no buzzing and its quiet. I am glad to still find a video on such desktop. and also to my surprise , I forgot I had windows 10 from the free upgrade. Thank you, thank you, thank you.
I respect this skill because it's something I'm so unfamiliar with, but you make it look easy and more understandable! I really enjoy your videos (on all your channels) and I wish you all the best 👍
I had the same issue and followed the instructions on removing the RAM sticks, power cord, etc etc and then replacing the sticks one at a time to eliminate the bad RAM stick or sticks. In my case it appeared that both sticks were bad so I put them aside and went about my day. Several hours later, I did the exact same procedure in the exact same order and voila! It booted to Windows! My guess is that there was still some electric energy hanging around and the several hours I spent away from the whole thing must have done the trick. Just throwing it out there, when the PC wouldn't boot I was perplexed because I had used it just a few days before.
Thank you so much for the informative ideas i already did it to my dell cpu and its works you are a angel from heaven. I was so worried because all my files is in my desktop and i saw your vlog viola!! And its work.. its so expensive to bring the cpu to technician and you didnt know if it will be fix thank you so much 😊😊😊 i will subscribe to your channel thank you and GOD BLESS
Another common problem you see with this type of issue is the keyboard being unplugged when you start the computer, preventing the OS from booting. You can change this in the bios settings on your computer, so if god forbid you forget to plug in the keyboard, you’re computer will still boot properly.
0:28 I did not get a beeping sound out of my computer either and as it turns out, it was a Memory/RAM Stick problem. 2:10 My SFF DELL OptiPlex 740 is the exact same on the inside of your Small Form Factor DELL OptiPlex 745. P.S. I was completly shocked that my DELL did not suffer any Critical Damage considering how hard it hit the floor when it fell. Saidly though, I fractured my Ankle and I was out for at least Six Weeks because of how hard the Desktop fell on the floor AND onto my Left Ankle! My goodness the pain. . . That was serious. Oh, if you were wondering how this incident was so serious, here is the Truth. I did a Modification on the Side Panel of my Desktop a Few Years Ago by mounting my 17" DELL Monitor on it. Why? Well, why buy an All-In-One PC if you can Make Your Own? So, that is what I did. All WAS well until a Couple of Months Ago. After that incident, I did not want to see that Computer for a while. And just Today, I went solve that problem that I had with it. Turns out, for me at least anyway. That it was as simple as a Memory/RAM Stick Problem. The Error Codes that I got were (Solid/Stable Light) 1 and 3 as well as 3 and 4. The 1 and 3 Error Code that I got I think was the Second Error Code that I got and the 3 and 4 Error Code was indeed the Third Error Code that I got. Whatever the First Error Code I got I have got absolutely no idea what it could have been. None the less, for me anyway, (like I said before) it was, Luckily, Only a Memory/RAM Stick Issue.
What does flashing amber power button and 3 and 4 mean for Dell Optiplex 790, I did some research and it said Memory Power Failure, but I dont understand because I tested with many pieces of ram and made sure they clicked, maybe the bottom is dirty or something.
Here is a link to a forum discussing possible solutions to the amber power light indicator. forums.tomshardware.com/threads/dell-blinking-amber-power-button.1439775/#:~:text=If%20the%20power%20light%20is,connected%20to%20the%20system%20board.
@@jhx2321 At some point the age of the computer is a problem and it will give up it's ghost. My old intel motherboard died recently because the capacitors failed. I might be able to bring it back to life if I replace all the capacitors but these are the problems that happens with electronics as the components age. It is inevitable.
That indicates a fatal Motherboard failure. It is probably not worth investing the time and energy in trying to fix it. You could check to see if there are any obvious bad capacitors or if the power supply is supplying the correct voltages.
Hello i have a problem with my optiplex 745 when i start it i only shows a down line like this _ and it blinks on my monitor dosent want to boot please help how do i fix this
Hi, It might be a memory stick problem also. The connectors get tarnished over time. If you carefully remove them and carefully rub the contacts with an eraser that cleans the contacts and reinsert the memory and reboot. Here is a video I found with some other options th-cam.com/video/GR_gx2OORHA/w-d-xo.html
When i press my dell optiplux 780 Power button, just green light blink n button continuesly..after on/of/on/off main power cabil button my pc start ..i m worried pls help
Esos códigos indican un problema con su memoria. En mi caso, simplemente eliminé la memoria y la reinstalé porque no se insertaron correctamente. Es posible que tenga mala memoria o una mala conexión. Si tiene mala memoria, necesitará obtener otros nuevos. Desenchufe su computadora. Intente quitar todas las tarjetas de memoria y luego instale una en la ranura uno. Enciende tu computadora. Si lo arregla, una de las tarjetas de memoria restantes está dañada. Apague su computadora y reemplácela con un dispositivo de memoria diferente hasta que encuentre el problema.
@@tmc200527 lo hice!! Muchas gracias, al abrirla solo limpie el área con una brocha suave y cambie las memorias de lugar y ya corrió normalmente, mil gracias amigo!
Here is the information on the error codes from dell www.dell.com/support/article/en-us/sln284978/a-reference-guide-to-the-dell-optiplex-diagnostic-indicators?lang=en
Respected Sir My Dell motherboard 6 Beeps And moniter power to light blinking key board not connect Ram Cleaning me, but not my problem solved plz my problem solved Sir
Happened to me tonight. Optiplex 980 working fine, reboot and wouldn't post, numbers 3 and 4 light up, Googled it and found your video. Did exactly as you showed, took memory out and then back in and voila, it worked. Thank you so much for your video, you saved my bacon.
Same issue, led 3 + 4 and beeping, took out the ram and tested them individualy. I found one of them was damaged and took it out, restarted the pc and it worked again. Thank you so much my dude. You are truly a life saver!
Not my normal video but I watched because I love your Morpheus channel.
@ it is vro
Thank you so much bro, I was going to sell my computer thinking it was broken, but thanks to you I saved hundreds of pounds 💯
I got one of these old systems from a school a few years ago and had it sitting around. I tried booting it up and got a bunch of loud beeps. I reseated the 4 1GB memory sticks and just fired up the system without putting the DVD and floppy drives back in. Success! I reset the BIOS to defaults and disabled the floppy disk. I was able to boot from a Windows 10 USB and install. I realized that the DVD drive was broken when I put it back in so I just just left it and the floppy unwired just to cover the gaps in the front. So far so good.
Thank you soooo much, I did your procedure and YES!! it worked and no buzzing and its quiet. I am glad to still find a video on such desktop.
and also to my surprise , I forgot I had windows 10 from the free upgrade. Thank you, thank you, thank you.
Glad it helped!
This stuff is actually so simple. I’m amazed how many people are terrified to do it themselves and pay hundreds of dollars for someone else to do it.
lol ikr
First time trying to go inside my computer , this vid worked perfect , issue fixed within 5 min , thank you
Gracias men sos un capo! Unicamente limpie las ram y las cambien de posision .. y funcionó mi pc nuevamente! No me mostraba video...Gracias!
I respect this skill because it's something I'm so unfamiliar with, but you make it look easy and more understandable! I really enjoy your videos (on all your channels) and I wish you all the best 👍
This worked and I am very happy! Thank you so very much!! May God bless you totally today!!!
I had the same issue and followed the instructions on removing the RAM sticks, power cord, etc etc and then replacing the sticks one at a time to eliminate the bad RAM stick or sticks. In my case it appeared that both sticks were bad so I put them aside and went about my day. Several hours later, I did the exact same procedure in the exact same order and voila! It booted to Windows! My guess is that there was still some electric energy hanging around and the several hours I spent away from the whole thing must have done the trick. Just throwing it out there, when the PC wouldn't boot I was perplexed because I had used it just a few days before.
The contacts become tarnished over time and maybe the second time you reinstalled the memory it finally made a good connection.
Absolutely top notch, had watched some “expert” vids, take graphics out etc nothing. Saw your vid and tried on my 780 Hoooray done, thank you 👏🙏
Thank you so much for the informative ideas i already did it to my dell cpu and its works you are a angel from heaven. I was so worried because all my files is in my desktop and i saw your vlog viola!! And its work.. its so expensive to bring the cpu to technician and you didnt know if it will be fix thank you so much 😊😊😊 i will subscribe to your channel thank you and GOD BLESS
Omg this saved me, thank you very much. I applied it in my Optiplex 780 (small case) and it worked!
This helped perfectly. Same prob and reser the memory cards. Dell 750 running linux mx 21 32 bit
Thanks for this video. My computer did the same all of a sudden. This video helped me fix the problem.
Thanks my dad got me a desktop from his work and it was not connecting to the monitor you helped me out! Thank!!!👍🏻👍🏻👍🏻
same issue, resolved as shown in your video. thanks a ton.
Another common problem you see with this type of issue is the keyboard being unplugged when you start the computer, preventing the OS from booting. You can change this in the bios settings on your computer, so if god forbid you forget to plug in the keyboard, you’re computer will still boot properly.
Thanks your video helped me to get going would have never guessed this fix again thanks
Thank you for your sharing! It's helpful.
Ha! Thanks, it worked! Managed to get away with taking them out and blowing them off, like an old Nintendo game cartridge. Works great now.
Me paso lo mismo
lo limpie con un soplador
y limpie las ranuras de la memoria ram
Saludos
You just saved my computer! I feel like a wiz
0:56 its revving like a sports car
hhh
Thanks for your video. It worked exactly as you showed.
0:28 I did not get a beeping sound out of my computer either and as it turns out, it was a Memory/RAM Stick problem.
2:10 My SFF DELL OptiPlex 740 is the exact same on the inside of your Small Form Factor DELL OptiPlex 745.
P.S. I was completly shocked that my DELL did not suffer any Critical Damage considering how hard it hit the floor when it fell. Saidly though, I fractured my Ankle and I was out for at least Six Weeks because of how hard the Desktop fell on the floor AND onto my Left Ankle! My goodness the pain. . . That was serious. Oh, if you were wondering how this incident was so serious, here is the Truth. I did a Modification on the Side Panel of my Desktop a Few Years Ago by mounting my 17" DELL Monitor on it. Why? Well, why buy an All-In-One PC if you can Make Your Own? So, that is what I did. All WAS well until a Couple of Months Ago. After that incident, I did not want to see that Computer for a while. And just Today, I went solve that problem that I had with it. Turns out, for me at least anyway. That it was as simple as a Memory/RAM Stick Problem. The Error Codes that I got were (Solid/Stable Light) 1 and 3 as well as 3 and 4. The 1 and 3 Error Code that I got I think was the Second Error Code that I got and the 3 and 4 Error Code was indeed the Third Error Code that I got. Whatever the First Error Code I got I have got absolutely no idea what it could have been. None the less, for me anyway, (like I said before) it was, Luckily, Only a Memory/RAM Stick Issue.
Thank you so much! An instruction you said was the solution to the problem, everything's running well again
Omg it work.......i love you....you saved me ......thank you
Im from Trinidad and Tobago
This worked. Absolutely brilliant. Very clear.
You have so much talent !! 😍😍😍
Thank you so much... Your video helped a log..... 👍👍👍👍
Thank you it actually worked !
What does flashing amber power button and 3 and 4 mean for Dell Optiplex 790, I did some research and it said Memory Power Failure, but I dont understand because I tested with many pieces of ram and made sure they clicked, maybe the bottom is dirty or something.
Here is a link to a forum discussing possible solutions to the amber power light indicator. forums.tomshardware.com/threads/dell-blinking-amber-power-button.1439775/#:~:text=If%20the%20power%20light%20is,connected%20to%20the%20system%20board.
@@tmc200527 thank you I'll see if it works, but so far it hasnt and I'll doubt anything will fix it now
@@jhx2321 At some point the age of the computer is a problem and it will give up it's ghost. My old intel motherboard died recently because the capacitors failed. I might be able to bring it back to life if I replace all the capacitors but these are the problems that happens with electronics as the components age. It is inevitable.
Oh shit iv been trying to fix this for like 2 years thanks
I had that exact same monitor. Great monitor.
Thank you worked like a charm!
Thanks so much! Solved the problem!
Can a power surge cause this?
good job man you saved my day thanks so much one like from me
Any idea on 1 and 4 ?
That indicates a fatal Motherboard failure. It is probably not worth investing the time and energy in trying to fix it. You could check to see if there are any obvious bad capacitors or if the power supply is supplying the correct voltages.
I have found the problem and fix it
Thank you very much you the best
@@vusitvsinika9556 How you fixed it? Iam having the same problem of 1 and 4 in a HP Optiplex 360
Thanks for information
Thank you 😁 pude reparar mi pc muchas gracias
Thanks
tq very much
On my Optiplex XE this didn't work, the RAM isn't the problem. The documentation say's it is a ram problem.
Any ideas on what lights 1 2 and 3 means.
Depends on your model and year www.dell.com/support/article/us/en/04/sln284978/a-reference-guide-to-the-dell-optiplex-diagnostic-indicators?lang=en
I have error 2 4, los help
It worked. Thank you
I'm so scared right now cuz my dell optiplex 3010 shows 3 and 4..
I'll inform U if it worked..
Thanks for the help
Great ❤
Thank you. it work!
I have dell system and i have error 1 and 4 what could be the solution help me plz
thank you savior!
Didn't work for my pc...
didnt work, i guess the dimm slot is dead
Hello i have a problem with my optiplex 745 when i start it i only shows a down line like this _ and it blinks on my monitor dosent want to boot please help how do i fix this
Hi, It might be a memory stick problem also. The connectors get tarnished over time. If you carefully remove them and carefully rub the contacts with an eraser that cleans the contacts and reinsert the memory and reboot. Here is a video I found with some other options th-cam.com/video/GR_gx2OORHA/w-d-xo.html
@@tmc200527 i fixed it i changed a ram stick was trash
2 or 4 light error
Ese mismo problema tengo con mi Optiplex 745
lo solucionastes?
no esproblema de memoria ram es la bios
thanks man helped a lot!
I tried this on my dell optiplex 390 and now the clamps won't clamp back on The rems
Yo someone help me, I got only two of those memory thingy.
When i press my dell optiplux 780 Power button, just green light blink n button continuesly..after on/of/on/off main power cabil button my pc start ..i m worried pls help
Relax
Es el único vídeo con 3ste problema en TH-cam y no está en español ayuda!!!!!
Esos códigos indican un problema con su memoria. En mi caso, simplemente eliminé la memoria y la reinstalé porque no se insertaron correctamente. Es posible que tenga mala memoria o una mala conexión. Si tiene mala memoria, necesitará obtener otros nuevos. Desenchufe su computadora. Intente quitar todas las tarjetas de memoria y luego instale una en la ranura uno. Enciende tu computadora. Si lo arregla, una de las tarjetas de memoria restantes está dañada. Apague su computadora y reemplácela con un dispositivo de memoria diferente hasta que encuentre el problema.
@@tmc200527 lo hice!! Muchas gracias, al abrirla solo limpie el área con una brocha suave y cambie las memorias de lugar y ya corrió normalmente, mil gracias amigo!
@@Mcchorrito yo tengo 3 de 2gb y hice lo que tu hiciste hermano y igual me sigue saliendo ese maldito error de luces 3 y 4 y ni se que hacer :c
Genial. Gracias
Muchas gracias!!!😅😅😅👍
It worked
Thanks i love You
what the 1 3 4 pls help me
Here is the information on the error codes from dell www.dell.com/support/article/en-us/sln284978/a-reference-guide-to-the-dell-optiplex-diagnostic-indicators?lang=en
Respected Sir My Dell motherboard 6 Beeps And moniter power to light blinking key board not connect Ram Cleaning me, but not my problem solved plz my problem solved Sir
It worked now it goes to 12 to 123 124
That the Ana computer my brother has
aqui propina se refiere a un consejo.min1:39
PLOBLEM IN CMOS CR2032!
Common problem with this line of Dell PCs, a complete piece of crap!