Hi, thanks for cranking out this video so fast. Glad that saw runs well for you. Its food for thought and temptation. Buy now, or wait for the improved model in 6 months ?
Honestly I'm very happy with this saw now that I've really put some work on it except for the carburator I'll keep tweaking it but it seems like it will not hold a tune on the high jet. I'm about to message the supplier about it but other than that it's been a good saw. I would probably wait for the improved version or get this and put a better carb on it. I'm hoping it's just a booger carb and another one will fix it
@@loweralabamahomesteading4661 in ordering Chinese parts for the 365/372, I've been unimpressed with the crank seals, intake boot rubber, and the plastic ring that holds the intake nuts. Any of these could cause intermittent intake leaking/ leaning. Retighten every bolt you can get to. If its a carb with protruding needles, I slit an inch of fuel hose flat, then cut two + shaped holes at the needle center to center dimension. Then slip the holes over the needles so they are bound to each other. You can still adjust, and its just enough tension to keep the needles from moving under vibration.
It is actually at the shop! Lol but it actually shows how great thier customer service and warranty is. I think the carb is faulty because I could tune it and it would rip then it would completely loose the tune. But for what this saw cost for what you get it soo worth it! They paid to have it shipped to the service dept they are doing a full diagnosis on it and are replacing anything that it needs. Also thier communication is top notch.
Infact I purchased a 872I because I know the quality I'm dealing with in neo tec. Check out the other video on my page I just made the other day. That 872I is AMAZING!!!
@@danachadwick4919 they actually sent me a brand new one because mine had an air leak. So it wasn't even an issue with the carb like I thought it was. Ain't had any trouble out of this new one
@@danachadwick4919 contact their customer service. They take care of Thier customers better than any buisness I've delt with in a long time. You can also contact Mathew Wood at facebook.com/2strokinchainsaw. He is a us based dealer and service shop.
@@loweralabamahomesteading4661 I agree their customer service is A+ and maybe the saw can be fixed. As more are being used their experiences will help me get this one running properly
Nice looking saw. I run the holzfforma clones. Also own OeM saws. That 365 is NOWHEREEEEEEE near a 365 special. Like not even in the same time zone.
Hi, thanks for cranking out this video so fast. Glad that saw runs well for you. Its food for thought and temptation. Buy now, or wait for the improved model in 6 months ?
Honestly I'm very happy with this saw now that I've really put some work on it except for the carburator I'll keep tweaking it but it seems like it will not hold a tune on the high jet. I'm about to message the supplier about it but other than that it's been a good saw. I would probably wait for the improved version or get this and put a better carb on it. I'm hoping it's just a booger carb and another one will fix it
@@loweralabamahomesteading4661 in ordering Chinese parts for the 365/372, I've been unimpressed with the crank seals, intake boot rubber, and the plastic ring that holds the intake nuts. Any of these could cause intermittent intake leaking/ leaning. Retighten every bolt you can get to.
If its a carb with protruding needles, I slit an inch of fuel hose flat, then cut two + shaped holes at the needle center to center dimension.
Then slip the holes over the needles so they are bound to each other.
You can still adjust, and its just enough tension to keep the needles from moving under vibration.
what's the improved model? I just got the nh865 this week and now in wondering if it's the improved model?
How is the NH865 holding up?
It is actually at the shop! Lol but it actually shows how great thier customer service and warranty is. I think the carb is faulty because I could tune it and it would rip then it would completely loose the tune. But for what this saw cost for what you get it soo worth it! They paid to have it shipped to the service dept they are doing a full diagnosis on it and are replacing anything that it needs. Also thier communication is top notch.
Infact I purchased a 872I because I know the quality I'm dealing with in neo tec. Check out the other video on my page I just made the other day. That 872I is AMAZING!!!
Did you get your 865 back yet
@@danachadwick4919 they actually sent me a brand new one because mine had an air leak. So it wasn't even an issue with the carb like I thought it was. Ain't had any trouble out of this new one
@@loweralabamahomesteading4661 ok thanx have not been able to use mine yet
You must have got lucky, mine will not build any useable rpms no matter how you tune the carb. Save your money for the real husqvarna
Will it crank and idle?
@@loweralabamahomesteading4661 yes but won't build rpm no matter how I adjust
@@danachadwick4919 contact their customer service. They take care of Thier customers better than any buisness I've delt with in a long time. You can also contact Mathew Wood at facebook.com/2strokinchainsaw. He is a us based dealer and service shop.
@@loweralabamahomesteading4661 I agree their customer service is A+ and maybe the saw can be fixed. As more are being used their experiences will help me get this one running properly
@@loweralabamahomesteading4661 thanx will contact him