German here! Please make sure that the "Adjusting screw " ist full opened 180° so that the pointer is pointing down. Otherwise the carburetor needle welds itself tightly. The lamp is not intended to be dimmed.😉 What the german name already says :"Starklichtlampe" (strong light lamp) Greetings from germany 🇩🇪 And sorry for my bad wording.
I was seventeen years old when my father teaches me how to a maintain and operate this type of kerosine lantern! Forty five years later I see again the lantern! Emotions and memories wake up!
What an elegant lantern. Firing it up is a lot like starting a "Make and Break", that old school firecracker technology that will just keep on working if you know how to make it work.
Yet another German here: The red line on the pressure indicator indicates the MINIMUM pressure needed. Pumping softer & gentler (unlike in this video) will reduce mechanical stress on the fragile mantle (true for all mantle-based pressure lanterns). The rapid starter (blowtorch) isn't gentle to the mantle and should be avoided unless absolutely necessary. It was an army requirement to have for a quick start in cold environments.
The "Blowtorch" lighter was for military use in freezing weather. Its really hard on the mantle. Use a little alcohol in the pan for the preheat. Its a little more work, have to fill it 2 or three times, but your mantle will thank you. Everclear or 100 proof vodka works fine.
I recently bought a Petromax,a real german from 1965. Came with a army metal case and spares parts. I used somes seals from the kit because the ones in the lantern were old,probably never changed until now. Thoses petromax are bright as hell,only downside in my opinion is the pump system,take manys pump to pressurize the tank. The coleman pump/check valve are better. To burn a new mantle with the rapid heater,just turn the heater on 4-5 secs and shut it off,the mantle will burn itself slowly,will take 2-3 mins to burn then lantern is ready to be light as usual. The real german petromax have "Made in germany" on the fount. The chinese one have Petromax germany marked on them but they are in fact made in china.
Had several of those back in my youth. Electricity was not reliable in rural areas. But with the electricification projects nearing completion, once remote areas have electric lamps and kerosene lanterns have taken a back seat nowadays.
I'm Bulgarian, 1967г. Имахме такав Петромакс "Petromax" ползвахме го само когато влизахме в Пещерата на село Лакатник, "ТЕМНАТА ДУПКА" Лампата е много специална, вътре се закача специално "чорапче" и се запалва, изгаря, И така то "СВЕТИ" Ееее...много приятни спомени 1967г. 💖💖💖
Something is wrong with your pump and you need to burn off the mantle before putting pressure on it. I’ve used two civilian and one military lantern for years. They really generate good and provide a good bright light.
Petromax. That brand was so famous in the 1920s in the Netherlands Indies, that until now in then Indonesia, all lanterns of that type are called Petromax lamps. Even Petromax has been an Indonesian word!
Petromax comes from Petroleum. I have a half campside of Petromax items. Several cast iron pans, Dutch oven potts, the percolator coffee can and of course a lantern.
How do these compare in brightness to a 236 or 237? My 236 is super bright with a large thorium mantle in it. Curious if you can get even more output with these
That looks like a coleman mantle. I just bought one of those lights. I would like an alternate to the original mantles. What mantles are you using? Thank you.
I also have one but im still not sure if you need to keep pumping once it is on. I mean, its pretty inconvenient if you have to right? I've only ignited them a few times. Mostly have it for decoration
You don’t have to “ keep pumping “ continuously. But you do need to keep an eye on it. Generally if it’s pressurised sufficiently it will probably run for about 45/60 min before needing a few more pumps. If you keep an eye on the mantle when it’s lit then you will see it turning from a white bright light to a more yellow less bright light when the pressure is dropping, it’s then time to give it a few pumps. You should not leave one of these lanterns un-attended or let children play with them.
Anyone know where I can find replacement parts for this kind of lantern? I just got one that is missing the Schrader Air Valve or screw that goes on the pressure gauge, and I need a new leather pump cup.
The first time I fired up my new Petromax I had problems! They are fiddley and if you don't like messing with old Morris Minors and Swiss watches at the same time then the Petromax is not for you! I suggest the non DIY people buy a gas or Electric Lantern. There are advantages to owning a petromax but you will need patients it is not as simple as filling it with paraffin and away she goes!
Yes it has to be set up correctly, but a beautiful lantern. I have one but use a Coleman kerosene 639 regularly as it is less fiddley and does what it says on the can. Low maintenance and good light and heat output. Takes the chill off a 12’x12’ room on a chill autumn evening.
Hello. Your lantern looks more like a Chinese made lantern compared to those made in Germany in from early 1900 to the late 60's early 70's. Unless "Made In Germany" is stamped in the tank, its not German.
I've got a cheap Chinese version similar to this, except it has no preheater, only the methylated spirit cup. I think it was made in Hong Kong and the brand is Globe.
I have the same lantern and love it! This definitely has all the traits of a Chinese made lantern. The star has eleven points (German made has 10) and only ”Germany” stamped at the bottom, instead made in Germany. For me, no big deal, great lantern!
German here!
Please make sure that the
"Adjusting screw " ist full opened 180° so that the pointer is pointing down.
Otherwise the carburetor needle welds itself tightly.
The lamp is not intended to be dimmed.😉
What the german name already says :"Starklichtlampe" (strong light lamp)
Greetings from germany 🇩🇪
And sorry for my bad wording.
Thank you so much!!!
Can the lantern be used indoors?
@@gerrycastlemanwarde5933sim pode mas não feche tudo se não e igual uma aquecedor sem exaustão pra fora de casa saudaçoes do Brasil
Obrigada!@@antiguidadesmetalurgiaealgomai
@@gerrycastlemanwarde5933 yes, just open the window to let the CO2 go.
I was seventeen years old when my father teaches me how to a maintain and operate this type of kerosine lantern! Forty five years later I see again the lantern! Emotions and memories wake up!
I was thirteen 42 years ago, I was in charge of lighting this up for my family! lots of memories!
What an elegant lantern. Firing it up is a lot like starting a "Make and Break", that old school firecracker technology that will just keep on working if you know how to make it work.
Yet another German here: The red line on the pressure indicator indicates the MINIMUM pressure needed.
Pumping softer & gentler (unlike in this video) will reduce mechanical stress on the fragile mantle (true for all mantle-based pressure lanterns).
The rapid starter (blowtorch) isn't gentle to the mantle and should be avoided unless absolutely necessary. It was an army requirement to have for a quick start in cold environments.
The "Blowtorch" lighter was for military use in freezing weather. Its really hard on the mantle. Use a little alcohol in the pan for the preheat. Its a little more work, have to fill it 2 or three times, but your mantle will thank you. Everclear or 100 proof vodka works fine.
I recently bought a Petromax,a real german from 1965. Came with a army metal case and spares parts. I used somes seals from the kit because the ones in the lantern were old,probably never changed until now. Thoses petromax are bright as hell,only downside in my opinion is the pump system,take manys pump to pressurize the tank. The coleman pump/check valve are better. To burn a new mantle with the rapid heater,just turn the heater on 4-5 secs and shut it off,the mantle will burn itself slowly,will take 2-3 mins to burn then lantern is ready to be light as usual. The real german petromax have "Made in germany" on the fount. The chinese one have Petromax germany marked on them but they are in fact made in china.
Had several of those back in my youth. Electricity was not reliable in rural areas. But with the electricification projects nearing completion, once remote areas have electric lamps and kerosene lanterns have taken a back seat nowadays.
That’s a beast ! Thanks for the vid. I just bought a rapids 828…….just going to check my house insurance!
I'm Bulgarian, 1967г. Имахме такав Петромакс "Petromax" ползвахме го само когато влизахме в Пещерата на село Лакатник, "ТЕМНАТА ДУПКА"
Лампата е много специална, вътре се закача специално "чорапче" и се запалва, изгаря, И така то "СВЕТИ"
Ееее...много приятни спомени 1967г. 💖💖💖
I’ve seen these but didn’t know much about them………NOW I’VE GOT TO HAVE ONE for my selection!! Awesome piece!
I have a brand new unit I will never fire up.I have about 5 I use that have blued from heat.others I have Aladdin and Optimus.Thanks and nice restore
Great video. Love your passion!
Very nice presentation and kool looking lantern. 😊
That thing is freaking sweet.
Very cool! Scott looks to really be on fire with these videos!
this video brought back memories of my childhood when life was much simpler
Really cool! I have to purchase one.
Something is wrong with your pump and you need to burn off the mantle before putting pressure on it. I’ve used two civilian and one military lantern for years. They really generate good and provide a good bright light.
Oh no! don’t start me on a new obsession. That is so cool. 👍
Great job, SJ!
Does this model smell of kerosene fumes while it’s burning? And how long will it burn on full? Good video brother thanks
@@clobbyhops they do have a kero smell as most kero appliances do. Nothing too bad. Thanks for watching!!
Petromax. That brand was so famous in the 1920s in the Netherlands Indies, that until now in then Indonesia, all lanterns of that type are called Petromax lamps.
Even Petromax has been an Indonesian word!
Petromax comes from Petroleum. I have a half campside of Petromax items. Several cast iron pans, Dutch oven potts, the percolator coffee can and of course a lantern.
These are good lamps . Burn the sock with the small flame..poor some burner spirits in that little scale...It will let the sock live longer.
How do these compare in brightness to a 236 or 237? My 236 is super bright with a large thorium mantle in it. Curious if you can get even more output with these
Gorgeous
Germans make some wicked equipment👍
That looks like a coleman mantle. I just bought one of those lights. I would like an alternate to the original mantles. What mantles are you using? Thank you.
Yup, just running a Coleman #21 mantle on it.
I also have one but im still not sure if you need to keep pumping once it is on. I mean, its pretty inconvenient if you have to right? I've only ignited them a few times. Mostly have it for decoration
You don’t have to “ keep pumping “ continuously. But you do need to keep an eye on it. Generally if it’s pressurised sufficiently it will probably run for about 45/60 min before needing a few more pumps. If you keep an eye on the mantle when it’s lit then you will see it turning from a white bright light to a more yellow less bright light when the pressure is dropping, it’s then time to give it a few pumps. You should not leave one of these lanterns un-attended or let children play with them.
Excellent video
I used this lamp when i was kid
Hey Scott ill check ur stuff out .Long time no see Brother
Just a rich man’s toy.
super super super !
Beautiful lamp! The only thing I don’t like, is it is only on or off… And, it sounds quite noisy…
How often does the generator need to be replaced?
Здравствуйте скажите пожалуйста мне попалась лампа Petromex е последняя буква не скажите что это за лампа?
is it available now?
i need
How long does it burn for w a full reservoir? Thx
Probably 5-6 hrs
Can the Petromax be used indoors?I have been told the instructions clearly say for outdoor use only!
outdoor only in my opinion at least!
ok, many thanks! @@scottjuliano774
Picture cabin burning down.
I remember late 60s and early 70s, we used to operate this petromax indoors only for about 10 years without any incident.
@@Mosa-166 Thank you!
But it is a beautiful lamp.
Deutschland , Deutschland . Gut gemacht!
Quiero una de esas, me encantan.
How did you polish it up?
@@sundownstudios502 flitz!
darth vader will agree to your microphone recording
gen-z need bookmarks for after-burning and reheat and movie top-gun
Anyone know where I can find replacement parts for this kind of lantern? I just got one that is missing the Schrader Air Valve or screw that goes on the pressure gauge, and I need a new leather pump cup.
St. Paul mercantile
Amazon
I bet a Coleman leather cup would fit just fine. It would be worth a try. I'm not sure about the other small screw.
Might I suggest the Petromax web site? All parts are available.
Gloves?😂
❤❤❤ lm here 2024
Always light the Gas mantle before lighting the lamp
How mach maney
Will this run on sheltie/Coleman fuel or does it need kero only?
I think they're designed for kerosene only.
kero only
@@scottjuliano774 They run on kero, petroleum and parafine oil
It would be more impressive in the dark.
The first time I fired up my new Petromax I had problems! They are fiddley and if you don't like messing with old Morris Minors and Swiss watches at the same time then the Petromax is not for you! I suggest the non DIY people buy a gas or Electric Lantern.
There are advantages to owning a petromax but you will need patients it is not as simple as filling it with paraffin and away she goes!
Yes it has to be set up correctly, but a beautiful lantern. I have one but use a Coleman kerosene 639 regularly as it is less fiddley and does what it says on the can. Low maintenance and good light and heat output. Takes the chill off a 12’x12’ room on a chill autumn evening.
Mr. You reside in america ? How much dollars does this lantern cost in USa ?
about $100-$200 USD used
I have that
If any person interested i will sold it
🇧🇩❤️🇧🇪
Сделана из латуни
สารคดีฝรั่งพอเริ่มต้นมันจะบรรยายทันทีและพูดไม่อยุดมันคิดว่าคนดูโง่เหรอมันน่าลําคาณจนไม่อยากดู
للبيع يبو
Hello. Your lantern looks more like a Chinese made lantern compared to those made in Germany in from early 1900 to the late 60's early 70's. Unless "Made In Germany" is stamped in the tank, its not German.
I've got a cheap Chinese version similar to this, except it has no preheater, only the methylated spirit cup. I think it was made in Hong Kong and the brand is Globe.
for sure not Chinese. branded Petromax Germany with the Schott globe as well. probably a later model but not a Butterfly or other Chinese variant.
I'm 100% certain mine's not German. I got it from AliExpress, ha ha!
@@scottjuliano774 Look at the base of the tank. MADE IN GERMANY should be stamped on it. If not, then not a German lantern.
I have the same lantern and love it! This definitely has all the traits of a Chinese made lantern. The star has eleven points (German made has 10) and only ”Germany” stamped at the bottom, instead made in Germany. For me, no big deal, great lantern!
You can be a bit more gentle…
To je zbytečných keců a kvičení kolem zapálení obyčejné petromaxové lampy!
Kero smell sucks
ตะกูลเหงียนไม่มีคําบรรยายคนดูพากันชอบอกชอบใจ