#908

แชร์
ฝัง
  • เผยแพร่เมื่อ 30 ม.ค. 2025

ความคิดเห็น • 278

  • @mikejuhas3993
    @mikejuhas3993 4 ปีที่แล้ว +2

    Hi Mike, hey I have been watching your channel for a few months now and appreciate all things going on at the household. As a former High Horsepower Tractor Specialist with Case IH (which by the way I am not too far from you in Erie, PA), the number one item that gets missed and not written up in all the maintenance schedules is...changing front axle oil. Yes, you can get by without changing it but that oil is unfiltered, so if there is any shavings from the mfg line or casting sand that finally comes loose from churning, it can go right for your axle seals. Changed that oil at 50 on my MX5100 and BX2360. Also appreciate seeing Hunter in your videos too! My brother is autistic as well however he is not mute but does live in an assisted living home near Clarion, PA. Kudos to the videos you and your family are generating!

  • @jackfairweather199
    @jackfairweather199 4 ปีที่แล้ว +1

    I changed the oil in my mower the other day and didn't spill a drop. A new personal record! At least you didn't drop the drain bolt from the oil pan into the drain container!

  • @jamesoncross7494
    @jamesoncross7494 4 ปีที่แล้ว

    It's good to see guys like Mike that take care of equipment, even though it isn't theirs, and care about little critters too. I'm that way too.

  • @andylamm5571
    @andylamm5571 3 ปีที่แล้ว

    Hello Mr. Mike. I have a Kubota MX5400 like yours, except no cab. It's time for me to do my 50 hour Maintenance. Thank you for showing me how. I really appreciate it. And enjoy learning from you.

  • @WindowGeek1
    @WindowGeek1 3 ปีที่แล้ว +1

    Mike, this was so cool today. It’s like wrenching on the tractor with your friend along for the ride. Great camera angles and simple, straightforward explanations.
    Nice work.
    I learn so much about operating techniques watching your videos. Today I learned a few things about how to lay out the maintenance too.
    Great stuff! Thanks.

  • @InTheShopWithDoc
    @InTheShopWithDoc 4 ปีที่แล้ว +2

    Mike I too can relate wit the spilling of oil lol. When I change the hydraulic oil filters even though I don't spill much the level does go down when the new filters get filled after running. I would suspect you should check your level again after running. Glad to see you are getting back into the groove and you are seeing progress on the new building. Man wish I could build a building half that size lol
    Take care and stay safe

  • @bobpurs
    @bobpurs 4 ปีที่แล้ว +19

    Glad to hear I’m not the only oil spiller.

    • @briandufty5081
      @briandufty5081 4 ปีที่แล้ว

      A man has to make his mark.. My step dad ask. Itol
      9pm I'm not saying any more.. Hi Hunter. Happy birthday. Who got best shot. Xxoo

  • @dougdickey7381
    @dougdickey7381 4 ปีที่แล้ว +7

    Just a suggestion, we have a lot of equipment on our farm and when I change the oil or fluids I write the date and hours on the end of the filters with a sharpie marker. That way I can just look at it and know when it was changed last.
    I also seen where someone else already mentioned it, but I've also used the shop vac method when changing hydraulic filters to keep them from dripping so much and loosing all that fluid.

  • @Onthejob374
    @Onthejob374 4 ปีที่แล้ว +4

    NICE JOB WITH THE TOADS....I ALWAYS STOP FOR TURTLES AND HELP THEM ACROSS THE ROADS HERE IN PA

  • @markbuetow2351
    @markbuetow2351 4 ปีที่แล้ว +7

    I'm glad to see that I am not the only one that can find a way to make a mess changing oil. It happens.

  • @frankfoust1037
    @frankfoust1037 4 ปีที่แล้ว

    Hey mike I know what you mean. I changed my water pump on my pickup. So it went on without a hitch. Put antifreeze in it then I started it up it run for about five or six minutes so get warm I noticed it was spraining any freeze. Turn off the motor call the pump back off. The gaskets had somehow twisted. So now it’s midnight and I have to wait till tomorrow to get me some new gasket. So I know what you’re talking about Mike you do one thing everything goes smooth and then something happens. I was going to ask you I noticed that whenever you before you close the hood on your tractor there is a place for a air filter I didn’t know if you change it or not. So keep up the good work.

  • @franklackie2469
    @franklackie2469 3 ปีที่แล้ว

    Nice tractor mike glad to see you appreciate n maintaining your equipment

  • @lloydpainter1701
    @lloydpainter1701 4 ปีที่แล้ว +11

    I tend to drop the oil filter into the oil bucket. Makes for a great splash! Not one of my favorite jobs. Enjoyed you video and glad to see you are human.

  • @petessite
    @petessite 4 ปีที่แล้ว +1

    dont forget to write the engine hrs & the date oil was changed on the end of the filter Mike , then you have visual of when it was changed , in permanant marker !!!!! How you all doing , regards from the UK.......

  • @billsiliskie2518
    @billsiliskie2518 4 ปีที่แล้ว +2

    I write the date and hours on the filters with a sharpie. It serves as a visual reminder for me for the maintenance schedule. Also have a notebook for each tractor.

  • @michaelmijatovich8983
    @michaelmijatovich8983 4 ปีที่แล้ว +6

    Mike about spilling the oil same here it never fails lol like you said the filter wrench is well oiled and it won't Rust lol Have a great Day

  • @EADeets
    @EADeets 4 ปีที่แล้ว

    Love the fact that you kept the toads safe. Reminds me of me. You have my respect!

  • @cayutacreekoutdoors485
    @cayutacreekoutdoors485 4 ปีที่แล้ว

    I'm just getting ready next week to do my 50 hour service on my MX 5400. Thanks for showing.

    • @cayutacreekoutdoors485
      @cayutacreekoutdoors485 4 ปีที่แล้ว +1

      Was wondering if you swapped out the filter magnet on the suction side from the old filter to the new one? I forgot to and had to spin my new filter off and reinstall with the magnet. I couldn't tell from your video if you did this or not. Just wanted to let anyone know that has a MX5400HST so they don't mess up like I did.

  • @tangoseal1
    @tangoseal1 2 ปีที่แล้ว

    Cool video man. Job well done!

  • @frankfoust1037
    @frankfoust1037 4 ปีที่แล้ว

    Hey Mike it’s me again but one thing is good half block away is it Auto Zone. Take care and God bless

  • @deanbarr5740
    @deanbarr5740 4 ปีที่แล้ว

    I noticed you do exactly the same way I do, before you put on the new filters you finger paint the rubber gasket with new oil. I did my 50 hour maintenance back in March. That is a nice tractor Mike. Looked brand new again after washing it up.

  • @dickhansen8594
    @dickhansen8594 4 ปีที่แล้ว

    Good video fella. Thank you for sharing with us.

  • @andylamm5571
    @andylamm5571 2 ปีที่แล้ว

    Thank You for showing me how to change the Oil and Filter's on my Tractor. I have the exact same one. Thank You.

  • @johnsadler8637
    @johnsadler8637 4 ปีที่แล้ว

    Good morning from MidMo again. Back from farm last night. Managed to knock all the tall (really tall- seeded out and some 4’) grass down mostly flat on the 2-3 acres loosely termed “the yard”. It’s inside the fence so cattle don’t do it for us. I won’t be back for about 5 weeks, so I set up for my deer camp trip - lit the pilot light on the heater etc. Set up trail cameras where we want to census deer crossing between the two halves of our farm. No matter what, oil will spill. Somehow, some way. And then the filter oil will get on frame or axle or something. At least your wrench won’t get rusty! I usually fumble the plug into the catch pan myself. I agree - that topsoil looked better after getting stirred up some. Those clumps might break up when you rake it. You’re going to appreciate that extra flat ground to work in.

  • @woofyw.2703
    @woofyw.2703 4 ปีที่แล้ว

    I wonder if you could screen out the bigger stuff out of the topsoil with the firewood bucket?

  • @BigBadRoaddog
    @BigBadRoaddog 4 ปีที่แล้ว +2

    Gotta admit you sure make moving, grading and shaping dirt look easy.

  • @jimmcghee4742
    @jimmcghee4742 4 ปีที่แล้ว +1

    I place the suction hose of a small shop vac on the hydraulic fill hole when changing hydraulic filters ony Kioti CK3510. They gave me an incorrect filter for one of them. Oil everywhere the first time. I didn't loose a drop with the vacuum. Enjoy watching. We're from Southern Illinois.

  • @lewissmith3616
    @lewissmith3616 4 ปีที่แล้ว

    I totally understand the part about spilling oil or dropping the wrench in the oil. I Fit in that same category. So I’m not alone in this field.. Thanks for the encouragement. Looking forward to seeing grass on that hill Someday hopefully before snow flies.

  • @rphiliprogers
    @rphiliprogers 4 ปีที่แล้ว +5

    Good morning all. Back to the Stihl store today. Fall is here forecast is for lows in the 30s by the end of the week. I wonder how may people will start cutting firewood to start burning this year. Stay safe, be kind and Have a day!

    • @davesoutdoorsnmore9049
      @davesoutdoorsnmore9049 4 ปีที่แล้ว +1

      Hello Phil, as I'm in. Southern Michigan and have already been collecting and cutting wood now for about a good month and probably still don't have enough as we burn about 15 cord's

  • @matthewsims359
    @matthewsims359 4 ปีที่แล้ว

    Im with ya on spilling oil. I changed the oil in the ranger today and made a mess before i even started. I grabbed my drain pain and hadn’t completely emptied it and slung oil every where. Took the filter off the ranger and dropped it, another mess. A 15 min job turned in to 45 mins to get the messes cleaned up. The Kabota looks good all cleaned up. My RK55 is coming home this weeken and getting serviced and a bath. Stay well, stay safe and yall HAVE A DAY

  • @olddawgdreaming5715
    @olddawgdreaming5715 4 ปีที่แล้ว

    Thanks for sharing with Mike. I feel your pain with the mess while changing oil. Got out from under the vehicle with no mess, moved the drain pan with no spills, walked around the vehicle and stepped into the drain pan wearing my brand new tennis shoes! Like they say _ _ it happens when you least expect it. Thanks for sharing with us and taking us along. 👍👍👏🏻👏🏻👏🏻👏🏻

  • @Comp670
    @Comp670 4 ปีที่แล้ว

    I had to change 20 gal of hyd fluid in my Ironworker today and got a lot on the floor. Im just like Mike, usually spill some EVERY time I change oil.... Its just the way it is.

  • @richglass6768
    @richglass6768 4 ปีที่แล้ว

    Thanks for finally doing a maintenance on one of the machines. I don't think you have ever done one on video before. If you did it was way back before the "tractors we don't mention any more"

  • @larrymoss1896
    @larrymoss1896 4 ปีที่แล้ว +2

    Sure like the way Mike maintains his equipment!
    Pie Town Larry

    • @crazyhass84
      @crazyhass84 4 ปีที่แล้ว

      Well its actually not his equipment...dont forget he gets this stuff for free! He has to do the maintenance or kubkta will be really upset lol

  • @tomeckermann6343
    @tomeckermann6343 4 ปีที่แล้ว

    I feel ya there, Oily Mike. I’m more of a wearer than a spiller. I helped a buddy change the oil in his 47 Olds rat rod a few weeks ago, and I had it all the way up to my armpits.

  • @tophat7199
    @tophat7199 4 ปีที่แล้ว

    I spill too and I do it every day for a living so your good

  • @allenhenry1113
    @allenhenry1113 4 ปีที่แล้ว

    Great job on the maintenance your doing on your tractor. Way to go on saving the frogs!!

  • @traviscover590
    @traviscover590 4 ปีที่แล้ว

    I like your new video today you did a really good jop today

  • @sunseeker5071
    @sunseeker5071 4 ปีที่แล้ว

    Great video........was not sure I could do the oil change on my BX, but now feel more confident. Thank you Mike

  • @rcp935peek4
    @rcp935peek4 4 ปีที่แล้ว

    I'm a spiller too. It was good to see that one of the products that you use was advertised on your channel ( the Lectric Bike step thru). Thanks for the great videos

  • @jayrich8059
    @jayrich8059 ปีที่แล้ว

    Hello, appreciate the video and content! What’s the filter wrench you used? Thanks

  • @chris3m98
    @chris3m98 4 ปีที่แล้ว

    I would have written the date on the new filters? Also, I would put a sealer on the concrete in the new building.

  • @humbleheart7196
    @humbleheart7196 4 ปีที่แล้ว

    Mike - get yourself some automotive grade rubber gloves for these messy jobs. They clean up easy and can be used multiple times. As a helpful hint, buy yourself a 5 gallon pail of oil versus the quarts. Cost effective option and environmentally friendly over the quart containers. Might think about a power wash under the hood/engine compartment, as that dust will turn to rock over time, if left to accumulate. BTW, the orange dirt didn't come off! Love the videos and look forward to the build.

  • @russellbowman8051
    @russellbowman8051 3 ปีที่แล้ว +1

    The slope is taking a little more shape little more time grass will be growing !!👍👊

  • @MikeSparkman
    @MikeSparkman 4 ปีที่แล้ว

    Hey Mike Morgan
    You may know this but with running your tractor in those dirty conditions your radiator, condenser and air cooler(if equipped) will get full of dirt. Water doesnt get them clean. You have to use compressed air. Blow them out opposite the normal direction of air flow first, then from the normal direction and back and forth. Be careful not to get too close and you wont bend any fins. Your shop is looking good. Looking forward to seeing the finished product.

  • @ronalddean4834
    @ronalddean4834 4 ปีที่แล้ว

    If I would have dropped that oil filter wrench 2 counties away it would have found that drain pan. But I like working on as well as with my tractor. I like taking care of it. Little things go a long way. Thanks Mike for sharing

  • @tommyordoyne7461
    @tommyordoyne7461 4 ปีที่แล้ว

    Nice toad save.
    Have a productive day.

  • @Hallnout
    @Hallnout 4 ปีที่แล้ว +2

    Morning Morgan's! Seems i always make my oil mess when removing the drain pan cap. Hopeful to receive some rain today. Still bone dry. Soybeans @ 4% moisture. Hope all are well & have a day.

  • @bryanblood7063
    @bryanblood7063 4 ปีที่แล้ว

    I tell ya what your the type of guy I'd buy a used piece of equipment from I've never seen anyone clean there tractor as much as you. I do the same as well I have a restored 1972 massey Ferguson that gets cleaned and never sits outside after use I have a polebarn though I also store my 78 3550 ford backhoe in my polebarn. I miss the mini excavator though if that was yours that would be a useful thing to get firewood in your 3 touch process. I cannot wait for the building to be built and to see how your gonna finish it.

  • @jeffhartmann2469
    @jeffhartmann2469 4 ปีที่แล้ว

    We got rain last night!! We needed it here in Southern Indiana. I just aerified my yard and spread grass seed…..Good timing!

  • @edwardballow2268
    @edwardballow2268 ปีที่แล้ว

    I have a MX6000 with 50 hours. Changed the engine oil and filter plus the trans and hydro filters. I heard a lot about people changing the hydro fluid as well at 50 hours not just the filter. The service manual doesn't say do it but I know Kubota dealers that will do do it at 50 hours. Thoughts?

  • @marcuswhite3628
    @marcuswhite3628 4 ปีที่แล้ว

    Glad to see you back in the saddle again❣️Marcus from Chesapeake VA.

  • @TheHobbyFarmHomestead
    @TheHobbyFarmHomestead 4 ปีที่แล้ว +4

    That’s a good looking tractor! Lol! Go team Kubota! Definitely, winter is coming. Keep up the good work Mike.

  • @daved7024
    @daved7024 4 ปีที่แล้ว

    Thanks for saving the Toads😊👍 It is a real good idea to use all KUBOTA Lubricant's there is a big difference in quality and additives they use. Although the grease is no biggy; but the Super UDT2 hydro fluid and engine oil is🚜👍😊

  • @davesoutdoorsnmore9049
    @davesoutdoorsnmore9049 4 ปีที่แล้ว

    Good to see the building is coming along and other projects on your property, I've been looking at getting a compact tractor and am good friends with the local store so we'll see what happens but probably looking at getting the 5400 series with front loader bucket and other attachment.

  • @MrUnkyfunky
    @MrUnkyfunky 4 ปีที่แล้ว

    Great Job on the video. I'm looking at that tractor currently. You changed two additional filters thought. What were they for ?

  • @joellemire3630
    @joellemire3630 4 ปีที่แล้ว

    In Canada 19 mm is the same as 3/4". LOL
    Keep up with the great videos. Love the channel.

    • @davidmorse8432
      @davidmorse8432 4 ปีที่แล้ว

      And 13 mm is the same as 1/2, and 16 mm is the same as 5/8, and 24 mm is the same as 15/16.

  • @robertsnyder5193
    @robertsnyder5193 4 ปีที่แล้ว

    I'm a spiller too, first one at 8 years old the filter slipped out of my grip and landed on my chest dumping entire content and I've lubricated many tools like you did.

  • @tomfillmore9710
    @tomfillmore9710 4 ปีที่แล้ว

    Good video thanks for sharing

  • @kaybee9000
    @kaybee9000 4 ปีที่แล้ว

    Ha!!! I changed the oil in my MX5100 into a 5 gallon bucket. Then into the same bucket I drained the oil from my John Deere 870. Refilled, greased and proceeded to back over the bucket. Thankfully I had a pile of crushed concrete close by and a front end loader on the 870. Than did a remarkably good job of soaking up the spill.

  • @BG-vq9fd
    @BG-vq9fd 4 ปีที่แล้ว

    I'm also a spiller. The first time I changed oil in my brand new building, I was all done under the truck with no mess. I caught the drain pan on something when I was picking it up and dumped all 6 quarts of dirty oil on my brand new floor.

  • @herbward5240
    @herbward5240 4 ปีที่แล้ว

    Mike, I have a Yanmar Diesel in the boat. The same horizontal engine oil filter. I cut a one gallon round windshield washer bottle to fit around the filter to keep the oil from getting into the bilges. Works well . Did you oil the gasket on the new filter ? Grab your 🧲 to get the filter wrench.

  • @goodboyringo9716
    @goodboyringo9716 3 ปีที่แล้ว

    Nice 5400 ! I'm hoping to get one if they ever start making them . Not one dealing in Michigan and other states that I checked have any.
    One thing I found is that it's better to clean the tractor before changing the oil but great job .

  • @samanthakilpatrick8003
    @samanthakilpatrick8003 4 ปีที่แล้ว

    Hi mike, you and Melissa, have made your property so nice 👍 you both work very hard and have put a lot of effort into it , it looks lovely. 😄👌🤗

  • @thelittlestpunky
    @thelittlestpunky 4 ปีที่แล้ว

    Hey Mike, check out Lincoln Industrial LNI3665 its a 17 gallon oil drain pan on wheels with a screen to catch everything and a 12v pump to drain it into an ibc tote or whatever. I use if for my equipment and our fleet, It was a life saver. Not great on gravel but for the new shop.

  • @chrispileski6640
    @chrispileski6640 4 ปีที่แล้ว +4

    Glad to see I'm not the only one that saves toads, frogs, snakes, praying mantises, etc. 😁

  • @1944chevytruck
    @1944chevytruck 4 ปีที่แล้ว

    oh well the oil wrench won't squeak!.... take care of your stuff good man!... thanks 4 video. be kind.

  • @bernardbrock180
    @bernardbrock180 4 ปีที่แล้ว

    excellent how to video. I still spill oil. It is natural thing to do.

  • @crystalclarity6766
    @crystalclarity6766 4 ปีที่แล้ว

    Loved the music before the toad incident! 😁

  • @kaleweidner2927
    @kaleweidner2927 4 ปีที่แล้ว

    How do you clean the grease off your tractor

  • @thebradleysoncatbirdhill6849
    @thebradleysoncatbirdhill6849 4 ปีที่แล้ว

    Mike! I love the way you take care of your equipment. 👍 I learned a tip years ago about changing oil. I have a handful of blue pads that are often sold for house training puppies. They have an absorbent side and a waterproof barrier on the bottom. Great to spread out under any machine that you are changing fluids on! Learnef the hard way, lol, just like you! 😱

  • @paulrice1918
    @paulrice1918 4 ปีที่แล้ว

    I have greatly reduced my spillage when I bought a catchment container that is sealed on top but slopes to the middle drain hole with a screw in plug and holds 5 gallons. It ids pretty goof proof.

  • @richardberkimer6727
    @richardberkimer6727 4 ปีที่แล้ว +2

    Yep, I'm a spiller too. Mike, one thing that I like to do on my MX is to write the date and hours on the outside of the filters with a black indelible pen. I find the date particularly important because I don't usually put enough hours on in the timeframe for the changes that the manual recommends. Makes checking them a snap. Did you have any issues greasing the front axle gear case supports? (to the inside of tires on top of the knuckle)? They always seem to give me issues.

  • @rtlake
    @rtlake 4 ปีที่แล้ว

    Good morning yes I can believe you can drop your wrench you are not the only one. I usually drop the drain plug in the oil pan.

  • @kylerayk
    @kylerayk 4 ปีที่แล้ว

    That tractor needs a play date with the power washer! Also, I noticed a drip on a plug or fastener rear of the engine underneath. I heard that a trick for changing they hydrostat filters is to hook a shop vac up to the filler port, turn it on, then remove and replace the filters. The air rushing in through the filter housing will prevent loss of oil. I tried it on the headstock of a metal lathe and it worked great!

  • @thalleshoward3962
    @thalleshoward3962 4 ปีที่แล้ว +14

    Oil filter wrench in the dirty oil, done in a million times.

  • @davidmorse8432
    @davidmorse8432 4 ปีที่แล้ว

    Take a magic marker and write down the hours and the date on the filters. It helps one remember when the last change was. I saw you check the hydraulic oil but did you check the transmission oil level. I believe the systems are separate.

  • @nigelgrant9693
    @nigelgrant9693 4 ปีที่แล้ว

    mike the next time you are changing oil do the filter before you put the drain plug back before you how engine are designed to flow underpressure to get all the oil out you did well what i with under carriage after washing i mix wd 40 diesel abit of transmission fuel and sprayed all under neat it all the vehicle can be done to protect the it saves it because its salt air over here its rust galore

  • @billfenner7084
    @billfenner7084 4 ปีที่แล้ว

    I really like the disclaimer that the two toads are going to be okay . I didn't think that you were going to smash them with the loader bucket.

  • @jonwright58
    @jonwright58 10 หลายเดือนก่อน

    Great informative video.
    Been looking at the 3901, how did you like that one. Been looking at the 5400 as well, it's a beast, just trying to decide if I need one that big
    Thanks

  • @gregritter5883
    @gregritter5883 4 ปีที่แล้ว

    Hey Mike little hand while you have the oil plugs out and you drain the oil out of the tractor and you changed the one filter you should change all the filters and then put the oil back in the tractor

    • @OutdoorsWithTheMorgans
      @OutdoorsWithTheMorgans  4 ปีที่แล้ว

      That was motor oil then hydraulic was the other filters

    • @gregritter5883
      @gregritter5883 4 ปีที่แล้ว

      Outdoors With The Morgans Did you go back and check the yeah you did never mind

  • @jasonbossaer2580
    @jasonbossaer2580 4 ปีที่แล้ว

    I’ve accidentally dropped the oil filter in the waste oil pan several times. That’ll make a splash. Good tutorial! Blessings, Jason from Indiana.

  • @rohoroyarrington3224
    @rohoroyarrington3224 4 ปีที่แล้ว +1

    I feel your oil spilling pain Mike. Somedays I think I should just empty the oil on the ground and save a step lol. Have a day.

  • @gckbuck
    @gckbuck 4 ปีที่แล้ว

    Question sir, can a backhoe be bought when you buy tractor. When I go to build it on line, it dosent offer one when your building it. Love the channel, Thanks!!

  • @dishpointer
    @dishpointer 4 ปีที่แล้ว

    A little trick to keep from loosing any hydraulic fluid is to put your shop vac on the filler hole while you change out the filter. I restrict mind down a little and when you remove the filter it draws air keeping the fluid from spilling out.

  • @streetrodder2846
    @streetrodder2846 4 ปีที่แล้ว

    Mornin' Mike. Hopefully ArmorAll has changed it's formula since the late 60's. I used to use it and found that, after a while, it would crack vinyl, rubber, and the like surfaces if you went very long without reapplying. I've had several classics and streetrods since then and use mostly Meguiar's products. Been watching Outdoors With The Morgans since you started and love every episode. ~ Jim, Olympia, WA

  • @passionfruitestate9691
    @passionfruitestate9691 4 ปีที่แล้ว +1

    I use disposable absorbent pads (~ 4ft by 4 ft) to do my tractor work as I'm unintentionally messy at times. They come in a pack of 6-12.

  • @evilbrat5376
    @evilbrat5376 4 ปีที่แล้ว +1

    Bucket, funnel, drip pan - whatever! Never fails. . . oil spill. Worse than Exxon! Happy to see there are a bunch of us out there - should start a club for this. . . name that club! Have a good day y'all.....

  • @donshaughnessy3281
    @donshaughnessy3281 4 ปีที่แล้ว +2

    I’ve never mastered filling the bar oil. About 3/4 of the gallon of oil actually ends up in the saw.

  • @kirbydison3959
    @kirbydison3959 4 ปีที่แล้ว

    Spiller...yep, it ends up somewhere it's not supposed to be everytime. Love your vidjeos. Bossier City, LA

  • @woods-garage
    @woods-garage 4 ปีที่แล้ว

    Sorry if you’ve covered before and I missed it, but what pressure washer are you using? The spray pattern looks good, and I need to replace my old one before too long. Maybe add to the equipment info section? Thanks

  • @fratamico55
    @fratamico55 4 ปีที่แล้ว

    When selling Kubota tractors, I always told my customers “fluids and filters, fluids and filters!” It prevents so many issues along the way.

  • @wmrichards2909
    @wmrichards2909 4 ปีที่แล้ว

    I would love to spray wash mine, but outside water, is from salty well, and leaves horrible salt cover. Love your videos. Living vicariously thru you.

  • @tinachambers4887
    @tinachambers4887 4 ปีที่แล้ว

    I always drop the drain plug into a 5gal bucket lol have a great day love from TEXAS

  • @stephenvenerable5078
    @stephenvenerable5078 4 ปีที่แล้ว

    Cleans up nice, the tractor that is!

  • @waynereiver3917
    @waynereiver3917 4 ปีที่แล้ว

    Thanks mike

  • @Tman317
    @Tman317 4 ปีที่แล้ว

    Mike, checkout the Fumoto drain valves. Once I discovered them, I have them on everything I own! Great toolless, clean and fast way to change oil. I bet they have one for thoe Kubota tractors.

  • @huckmiller1971
    @huckmiller1971 4 ปีที่แล้ว

    Not to worry Mike , I could get dirty in an operating room ! What's the idea of two oil pans ?

  • @Timberwolf593
    @Timberwolf593 4 ปีที่แล้ว +11

    Good morning Morgan’s I know what your talking about,it never fails the wind blows and oil goes all over the place, Have a Day 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸

  • @kevinhenry7273
    @kevinhenry7273 4 ปีที่แล้ว

    2 oil pickups, or 2 oil pumps? No eqaulizer tube between the sumps?