when will the review for this clipper come out ? Also why is this tool needed to zero gap, if with other trimmers all you need to do is move the blade up. Im not understanding
@@premiercutts22 you mentioned that its easy to zero gap with that tool but if someone doesn't have it "you are stuck with that problem" of having to buy the tool? But still leaves me wondering, is the tool just to make it easier but you can still zero gap it without the tool?
Can you explain the matter of the "zero gap again"? Do you mean that in any hair-cutting machine with 2 these screws on the back that you mentioned, I can reduce the cut until it is as close to 0 as possible?
as long as you can unscrew the blades and move them separately, you can push them so they’re aligned as close as possible to cut sharper, leave a tiny gap between the blades so it isn’t too sharp and dangerous
sucks that it doesn’t come with the zero gapping tool. Also would have been amazing the babyliss blade could fit, seems to be the most similar of all the trimmer blade. either way, another one! great review! keep em’ coming!
i doubt it, that’s the thing with these low cost trimmers and clippers, you mostly get a good body and guts but that’s it, and that’s fine with me, you gotta buy some of the extras as brand name, like the blade etc.. again also fine with me, the final cost of what you spend is still better/lower. And you get to buy a new tool almost every week of you want, due to the low cost, that’s what makes this fun for everyone.
The kemei km i32 don’t got a review on your channel just this unboxing video. Can u link or tell me which video you discussed this mod in I’ll gladly check it out 👍🏾💈love the channel 💪🏾💪🏾💈
Carlos, I need your help - what is your recommendation for chinese zero gappeable trimmer and clipper (with clicking lever) because I have no experience but passion on cutting hairs and all the information confuse me. Thank you in advance 💈
What do you recommend for someone to just get the best crisp line up I bought this machine it hasn't shipped yet any input would be awesome from the review you said it wasn't as crisp but then again I'm not a barber so I can't bless myself 😂
Which clipper would you recommend me as an intermidiate with a low budget?Looking something that has good amount of power.I saw your vid ab Surker K7S.
Was definitely interested in this Trimmer ... but question, what the best trimmer for Balding, and what’s the best kemei trimmer for Balding ... HELP‼️☑️
Luckily I had the tool and got mine gapped and they hit..down side is where the power button is ..I always turn it on and off on accident with my grip..but very good
you can exchange the blades for any of andis
th-cam.com/video/KMyWubowwxA/w-d-xo.html
Was doing some research and I saw that the andis pivot blade looked really close to this one. Not 100% but I think it would be something to look into!
Any real life reviews on this trimmer? How about blade swaps to the Wahl or Andis blade? Keep up the budget tool reviews really hitting a niche here!
th-cam.com/video/KMyWubowwxA/w-d-xo.html
@@punchy740 thanks bro!
@@ceerez1002 you bet! 👍
Bro pls pls do the kemei 2010 clipper !!!!
Can't wait for the review for this thing. Sadly the babyliss blade doesn't fit on it but maybe the future models can fit babyliss blade on it
Yea for sure
Kemie km i32 or km1971 ? What do you suggest I buy
Hey which one is better the kemei 1949 or i32?
Which is the best for zero clearance cutting and making lines , this or kemei 5027, p700 or kemei 700h ?
It really depends on how well you can zero gap them
when will the review for this clipper come out ?
Also why is this tool needed to zero gap, if with other trimmers all you need to do is move the blade up. Im not understanding
U might need to watch the video again
@@premiercutts22 you mentioned that its easy to zero gap with that tool but if someone doesn't have it "you are stuck with that problem" of having to buy the tool? But still leaves me wondering, is the tool just to make it easier but you can still zero gap it without the tool?
Hey bro did u ever swap the blade on this?
Which is better kmi32 or km5027?
I agree 100%..the allen wrench should be included. Great unboxing video 💯💯
Thanks Kenny
They definitely missed the mark on that one
Can you do the xiaomi enchen hummingbird trimmer?
I’ll look into it
Anyone know if the stylecraft trimmer blades fit this trimmer?
Can I put a andis blade on it?
Does the Andis t blade fit this clipper?
Only with the mod
@@premiercutts22 can you do a video on the mod if possible?
When are you going to zero gap or swap blade .... Let us know bro
I did zero gap them
But still looking to change out the blade
th-cam.com/video/KMyWubowwxA/w-d-xo.html
Hola bro, es buena maquina? Es potente de comienzo hasta que se descarga o baja su potencia a medida que se descarga?
Yes
Can you explain the matter of the "zero gap again"?
Do you mean that in any hair-cutting machine with 2 these screws on the back that you mentioned, I can reduce the cut until it is as close to 0 as possible?
as long as you can unscrew the blades and move them separately, you can push them so they’re aligned as close as possible to cut sharper, leave a tiny gap between the blades so it isn’t too sharp and dangerous
Let us know when you can find a quality blade for the swap.
I bought a WAHL blade for them
th-cam.com/video/KMyWubowwxA/w-d-xo.html
@@premiercutts22 is there’s a link or name of this particular blade?
@@premiercutts22 did you have to do anything special to get it to work?
Any idea on what the blade can be swapped with ?
Not with those
sucks that it doesn’t come with the zero gapping tool. Also would have been amazing the babyliss blade could fit, seems to be the most similar of all the trimmer blade. either way, another one! great review! keep em’ coming!
Hopefully they learn from this and add one on the next clipper
i doubt it, that’s the thing with these low cost trimmers and clippers, you mostly get a good body and guts but that’s it, and that’s fine with me, you gotta buy some of the extras as brand name, like the blade etc.. again also fine with me, the final cost of what you spend is still better/lower. And you get to buy a new tool almost every week of you want, due to the low cost, that’s what makes this fun for everyone.
I just received this and zero gaped it easily true you need that small wench tool
nice review. Looks good.
Can you do the km 2010?
It’s definitely on my list just have other in house I need to get out of the way first
I've binged watched your vids and I got a question. What's the one budget trimmers you recommend for home use? I want them to hit and last long.
Looking to make a video on that
@@premiercutts22have you done this?
Saw in a comment you put a wahl blade on these which exact blade did you put and was it a easy swap ? Trynna get the most outta these things lol
Look on my channel and u can see the review were I go into that more
The kemei km i32 don’t got a review on your channel just this unboxing video. Can u link or tell me which video you discussed this mod in I’ll gladly check it out 👍🏾💈love the channel 💪🏾💪🏾💈
I would like the link to that video too. I can't find a review/blade swap video on your channel for this trimmer
@@jelanit same here 🤔
Carlos, I need your help - what is your recommendation for chinese zero gappeable trimmer and clipper (with clicking lever) because I have no experience but passion on cutting hairs and all the information confuse me. Thank you in advance 💈
I try and make a video of that soon just don’t know when
What do you recommend for someone to just get the best crisp line up I bought this machine it hasn't shipped yet any input would be awesome from the review you said it wasn't as crisp but then again I'm not a barber so I can't bless myself 😂
Go check out my last video and you will find your answer
The Audoc trimmer right now is my favorite
Will the whal detailer fit? I put the detailer blade on other kemei trimmers and they hit.
Haven’t trying
th-cam.com/video/KMyWubowwxA/w-d-xo.html
Which clipper would you recommend me as an intermidiate with a low budget?Looking something that has good amount of power.I saw your vid ab Surker K7S.
Kemei 1986
Hello, what's your recommendation for Best hair trimmer for basically almost shaving beard level and sometimes cutting my son's hair? Fading
The Kemei 1986 and trimmer Kemei 1971 is a great start
Hope that help
Where can I find the zero gap tool
🤷🏽♂️
Can you put an andis blade on these
Nope
Where would one get that kemei blade ?
Not sure 🤔 definitely need to find out
On AliExpress I jus checked and it saids the body is aluminum
Great video! I assume the tool needed to zero gap is 1.5mm, can you please confirm if you know?
I don’t remember sorry
@@premiercutts22 all good, thanks for the video and your reply!
@PremierCutts confirmed it's a 1.5mm Allen wrench (hex key).
Sheesh bro. Looking more and more fit
Thanks 🙏🏼
Working hard 💪🏽
Was definitely interested in this Trimmer ... but question, what the best trimmer for Balding, and what’s the best kemei trimmer for Balding ... HELP‼️☑️
The one I just made a unboxing the Audoc trimmer
@@premiercutts22 ooooh Word! Okay gonna look at that man where did you find your product at? Thanks for Responding back.
U have link for the zero gap tool
Nope I could find it sorry
Hey man I want this machine for my legs will it work? Please respond so I might buy it I have a lot of hair
Sure
Just buy a clipper with a 1 gaurd You dont want to use trimmers on your legs
Will it take a GTX blade?
Nope I tried and it didn’t fit
th-cam.com/video/KMyWubowwxA/w-d-xo.html
do you recomend it??,
Yes if you do the mode
Luckily I had the tool and got mine gapped and they hit..down side is where the power button is ..I always turn it on and off on accident with my grip..but very good
Yep I have the same problem we’re my Tom is constantly accidentally turning off the power because of the placement of the button
Which one did you like more? This one or the KM-5027?
The KM 5027
Trimmer has enough motor power?
Yes sir
@@premiercutts22 Thanks 👍
Nice video! Wonder how much RPMs/SPMs it runs at 🤔
Not sure but I wouldn’t trust the Manual if it gave me any numbers anyways not sure how accurate it would actually be
@@premiercutts22 You should try the GIRI RPM app. It's not 100% accurate but it gets really close.
The Andis blade might fit the GTX or Refular t outliner blade if not the slimline might fit
Going to look into that 👍🏼
Here you go!
th-cam.com/video/KMyWubowwxA/w-d-xo.html
I personally like the brand .
Yea it’s definitely good
Great video bro...💯
🔥
You need to show how it cut , not explaining the design lol
Gooooooood
chj pros till i die
🔥🔥🔥
🙌🏼
Please react to my 7400 rpm trimmer mod💜
Kemei 1973 is the best.
Did you try km 1949?
no good
& km 5027
First
Yes u are