I continue to gain appreciation for the mechanics of bygone times. Toby, that was most interesting and informative. Thanks as always, for your straight-forward presentation and explanations! Be well, be safe!
We smart native Minnesotans know how important it is to plan for winter and Squatch is the best example I know of; fire wood made and equipment where it needs to be. The pressing stack is pure genius.The right tools for the right job and if you do not have them, make them. 👍👍
And you're exactly right about the 'feel' benefits of the hand pump. Hand-operated tools might be a bit slower and all that, but the importance of feel cannot be overstated.
That was really cool to watch. Thanks you for explaining the entire process. And it's always awesome when Squatch makes a tool. Thank again for your time. Cheers
Thank you for this. My experience is with LIVE TRACK on tanks, similar but the inside and outside bushings are separated by rubber so that steel does not touch steel. Yes there is more friction when the track which are loaded at an angle (about 30 Deg) is forced flat by the first road wheel but you get some of that energy back when the track gets to the end and jumps up thus the meaning of "LIVE TRACK". I had assumed that DEAD TRACK was rather simple but the engineering is quite ingenious.
Well now. I think of all the bicycle and motorcycle chains I replaced and threw away. And I look at this one guy,this one video on how to recycle a chain assembly. And I think about what it would have taken to fabricate,tinker,purchase,and otherwise fiddle and experiment till I got it right. And all those winter nights I spent with the cat in my lap,the dog on the rug next to the couch,and my girlfriend nestled on my shoulder,all gone now,well I still did the right thing throwing the chains away. But it sure was interesting now I have an idea of just what it takes to go through the whole process step by step. Toby,thanks for this. I really appreciate it.
Absolutely amazing on how Toby will do work with such care to produce an end result. Great instructional video on the tech side of track maintenance, thanx for sharing. 😃
Strictly a DIY and home mechanic, I oddly rarely use my air tools and almost never the cordless when I work, handtools let me feel and better remember the work as I only do something every few years. So something about being manual in this world ain't so out of step for some of us!
Holly #$% that's slick! You basically have NEW pins you're using. You just have to be careful with how you orient them. VERY nice! A ton of work but gives you double the life out of those parts. Super well done! Thanks for sharing. 🙂
I understand your comment I'm a manual labor guy in a automated world. I still split my 2 cord of firewood by hand post holes by hand and so forth. That is what keeps me going at 72. Just a number.
When asked what he would do if he had only six hours to chop down a tree, President Lincoln replied, “I would spend the first four hours sharpening my axe.” That and "A job well done is it's own reward." Wisdom.
Nice work! My dad built presses for doing all that as well. Did about 4 sets for a D2, one or 2 D4, and TD35, TD40 chains. Lot of work to take apart and repress. Never was around when he did them, now I know what it looks like. Thanks.
As i have watched your fastidiousness with assembling the links and the track, I now understand much more how tracked vehicles work. And I admire your patience with a very tedious process!
Thank you and Senior for your time. 👍 Okay, 😉 you make the process look 👀so easy I want to run out and do all three of my 955's 😆... NOT. But if ever I need to work on mine I'll have an idea how deep the rabbit 🐰 hole 🕳 should take me. Why shoot I'm a TH-cam excerpt now. 🤣😂🤣😂🤣😂
All ways good to see your work. I was lucky enough to be able to purchase a new chain for my 3j D2 at a auction a couple of years ago. Old new stock. Still wired to the pallet. But I still need 28 track shoes.
I like a manual pump for the ease in which you can sneak up on a loading with it, sure auto-pumps are nice and speedy and they have their place if you're wanting to knock out a lot of things quick. Still though, maybe not fully run the bushings down with the auto pump, but do get them 'set' and nearly seated so you can finalize it with the manual to see and feel if the press fit doesn't quite feel right as in too loose, plus the time between mounting and dismounting will give the links, pins and bushings time to relax and spring back slightly. It might not be much of a thing to consider, as to me, it's similar to needing to re-torque lug-nuts after so many miles and the process of checking bolts and so forth after so long incase of relaxation after torque cycle.
You and Senior would of made great engineering technicians. I don't think technicians need much of that math that mixes letter and numbers (LOL). You rock. 👍
Awesome track pin and bushing assembly video and it's not the first time I've see press plated bust up under pressure even had a couple Hercules and Acme press plates crumble too
Ha ha you gave into my suggestion of the power pack ! Which you said you had … I still want to lie down with the thought of all that work ahead ..! Doesn’t Berco sell chains ..? I know you are Mr ordinary! I see snow outside so you are locked in the shop , which I must say is - a place for everything and everything in its place ! I’ll sit back and enjoy the journey 👍
About the pump, I used to work at a place with a 50 ton press that had a hand pump but we added an air powered hydraulic pump to it. We just 'T'ed it into the line so you could use either pump at any time. So we could bump the power pump to close things up but switch to hand pump as soon as we wanted to feel the load. You have to be OK with the fluids mixing and you have to try to release about the same amount back into each tank.
A tedious process like that can be really error prone if you loose your concentration. I would have a tough time with that. Congrats on getting it done! Plus, more custom tooling! There must be a whole cabinet full of that by now. I’m sure it’s well organized someplace. You should have a video quiz asking us to I’d them all!
I have to believe that your tool set must be pretty close to what Cat used when they built those chains. Impressive how they allowed you to get every pressing to exactly the right depth easily and quickly.
When you started to talk about the new master bushings and pins I about had a stroke because i tried to find one for a D6 9U and couldn't find them, wish I had bought a set years ago, I made both the bushing and pin, so far seems to have worked out okay.
Great work on the tooling and process I can imagine the hours you have put into the trial and error and carful thought for each step . Keep up the fantastic work. You nailed it again!
In the full spectrum of excitement you start with "about as exciting as watching paint dry". I think the next step might be "watching pin & bushing pressing". Somewhat boring unless something goes wrong....and then it gets real exciting for a second or two! 😁
5 months of winter ----- Yikes. I save up winter projects & seem to go through them fairly quickly. There's always something that needs paint inside the house - I never seem to get to ..... 👍
It seems like the hand pump is better for the disassembly of the track chains since there is unknown excess friction/resistance created by corrosion in the push-fit area, leading to the chance of excessive force being applied to the press or other components. Without reviewing the previous video, weren’t some of those pins “popping” at 50 tons? By the time the pins are cleaned, wear shoulders beveled, and PFL applied, the press-fit force required would be much more uniform, like 30 tons, (?) and less fraught with high-pressure mishaps.
Every time you said 15 tons as you pressed the bushings I was reminded of the old "Sixteen Tons" song by Tennessee Ernie Ford. Might make a good music video
I was thinking just the same. Then again you have to be old enough to have heard that on the radio. Back when penicillin cured everything. And my back didn't hurt.
The guide for the last bit of pin travel. Might it be a touch simpler to have one in place during the initial press with an opening just big enough for the pin to fit through & just thick enough to achieve the needed extra distance? Would help a little with the tedium of resetting to setup again then continue. Or doing this way to make it less likely it slips if doing the above method & send bits in 3 directions?
Looks like you guys got powdered... here it's still 14C out. Very cool solution you figured out at 8:16 as an answer to their track chain pressing table. I saw one in the old magazines i peruse, and in essence, you've got the same result, but with a much smaller "outfit". Cool, cool.
Great to see your process and home made tools to make it happen. Any thought of having a support of the other end of the link to help insure alignement without having to hold it up until pressure is on the side you are pressing?
@@squatch253 - they still will take a press fit to put them together, it makes for a much faster setup, avoids misalignment, and takes less force. When ever I did chains(I only replaced sections of links) I used this method and the equipment was all D6-D8 size, these rails were much worse than your D2s. Also during disassembly you will find any loose fitting pin/bushing. They all press at a minimum pressure, if one goes easy it’s likely junk.
It's good that you had those replacement bushings for the master links. If you didn't have them my guess is that you would have been able to take two of the regular bushings and cut them down to the right length on your lathe.
there was one shot of a pin pressing into a link (timestamp 20:20)that had a perfect view of the wear line in the pin, but the video jumped to another pin being pressed in. I would have liked to see that wear line as it reached it's resting position. idk how much trouble it would be to add in to the public feed video, but I thought it would have been a good visual. And maybe I was just looking forward to seeing it too :) Can't wait to see those swampers on there!
Great explanation of the geometries of the pins and bushings when they are turned. What happens to the overall track length if you select reverse under load?
The popping seems to happen when you stop short and start again. I'm sure it's hard to tell when your home and that is why your stopping short. Caution is good.
Here's an idea for an interesting follow up. What would be options for undercarriage parts once there's no more old parts to scavenge? Would there be ways to repair older parts?
Toby, only a true neat freak could call either of those sets of bushings "piles." You want to see real piles of a whole variety of things, come visit my house
When pushing the pins in, how come you did this in two steps instead of having your home made tool in place and doing the press in one shot? For safety perhaps.
Squatch I'd love to get in touch with you to see what you'd say about a 1936ish cat diesel 40 for sale here new England. I'd love to see what she's worth and if it's worth it. I wanna get into it like you are ! Thanks !
I never dreamt that a track service could require so much thought and consideration to get everything right. Thanks Squatch
I continue to gain appreciation for the mechanics of bygone times. Toby, that was most interesting and informative. Thanks as always, for your straight-forward presentation and explanations! Be well, be safe!
We smart native Minnesotans know how important it is to plan for winter and Squatch is the best example I know of; fire wood made and equipment where it needs to be.
The pressing stack is pure genius.The right tools for the right job and if you do not have them, make them. 👍👍
Hey Toby,,binge watching the 1113 biuld. Awesome. Had to become a member.
@@squatch253 Will do
And you're exactly right about the 'feel' benefits of the hand pump. Hand-operated tools might be a bit slower and all that, but the importance of feel cannot be overstated.
Great walkthrough of the process, and I can appreciate all the work that goes into doing that process correctly and consistently.
That was really cool to watch. Thanks you for explaining the entire process. And it's always awesome when Squatch makes a tool. Thank again for your time. Cheers
Thank you for this. My experience is with LIVE TRACK on tanks, similar but the inside and outside bushings are separated by rubber so that steel does not touch steel. Yes there is more friction when the track which are loaded at an angle (about 30 Deg) is forced flat by the first road wheel but you get some of that energy back when the track gets to the end and jumps up thus the meaning of "LIVE TRACK". I had assumed that DEAD TRACK was rather simple but the engineering is quite ingenious.
Really good work there my friend 👍👍👍 day
Well now. I think of all the bicycle and motorcycle chains I replaced and threw away. And I look at this one guy,this one video on how to recycle a chain assembly. And I think about what it would have taken to fabricate,tinker,purchase,and otherwise fiddle and experiment till I got it right. And all those winter nights I spent with the cat in my lap,the dog on the rug next to the couch,and my girlfriend nestled on my shoulder,all gone now,well I still did the right thing throwing the chains away.
But it sure was interesting now I have an idea of just what it takes to go through the whole process step by step.
Toby,thanks for this. I really appreciate it.
Absolutely amazing on how Toby will do work with such care to produce an end result. Great instructional video on the tech side of track maintenance, thanx for sharing. 😃
Strictly a DIY and home mechanic, I oddly rarely use my air tools and almost never the cordless when I work, handtools let me feel and better remember the work as I only do something every few years. So something about being manual in this world ain't so out of step for some of us!
I love your attention to detail, thank you.
Holly #$% that's slick! You basically have NEW pins you're using. You just have to be careful with how you orient them. VERY nice! A ton of work but gives you double the life out of those parts. Super well done! Thanks for sharing. 🙂
I understand your comment I'm a manual labor guy in a automated world. I still split my 2 cord of firewood by hand post holes by hand and so forth. That is what keeps me going at 72. Just a number.
You have much patience with with those track rollers have a good night.
When asked what he would do if he had only six hours to chop down a tree, President Lincoln replied, “I would spend the first four hours sharpening my axe.” That and "A job well done is it's own reward." Wisdom.
Nice work! My dad built presses for doing all that as well. Did about 4 sets for a D2, one or 2 D4, and TD35, TD40 chains. Lot of work to take apart and repress. Never was around when he did them, now I know what it looks like. Thanks.
I've learned so much about old Cats from your videos. Thank you for informative videos.
Good stuff! I guess with constant pressure from the electric motor it presses more smoothly thus less jumps and bumps
Keep em coming!!!!
As i have watched your fastidiousness with assembling the links and the track, I now understand much more how tracked vehicles work. And I admire your patience with a very tedious process!
Squatch is the master of rust... My OCD would have required I put rust convertor on those parts!
Looks like winter has arrived there for sure! Thanks for the video, loved the presentation of the parts!!👍🏼
My eyes are drawn to that black splatter over your shoulder on the garage door talking scenes.
Thank you and Senior for your time. 👍
Okay, 😉 you make the process look 👀so easy I want to run out and do all three of my 955's 😆... NOT. But if ever I need to work on mine I'll have an idea how deep the rabbit 🐰 hole 🕳 should take me.
Why shoot I'm a TH-cam excerpt now. 🤣😂🤣😂🤣😂
Superb work. Your knowledge is killer. But I’m pretty sure I would have bailed on that and just used the new rails 😂
All ways good to see your work. I was lucky enough to be able to purchase a new chain for my 3j D2 at a auction a couple of years ago. Old new stock. Still wired to the pallet. But I still need 28 track shoes.
I like a manual pump for the ease in which you can sneak up on a loading with it, sure auto-pumps are nice and speedy and they have their place if you're wanting to knock out a lot of things quick.
Still though, maybe not fully run the bushings down with the auto pump, but do get them 'set' and nearly seated so you can finalize it with the manual to see and feel if the press fit doesn't quite feel right as in too loose, plus the time between mounting and dismounting will give the links, pins and bushings time to relax and spring back slightly. It might not be much of a thing to consider, as to me, it's similar to needing to re-torque lug-nuts after so many miles and the process of checking bolts and so forth after so long incase of relaxation after torque cycle.
Never would have believed the precision work that goes into track pins and bushes 🤔😳 great video 👌
Job is more complex than one would think at first glance.
Good as new again nice work
You and Senior would of made great engineering technicians. I don't think technicians need much of that math that mixes letter and numbers (LOL). You rock. 👍
Awesome track pin and bushing assembly video and it's not the first time I've see press plated bust up under pressure even had a couple Hercules and Acme press plates crumble too
Ha ha you gave into my suggestion of the power pack ! Which you said you had …
I still want to lie down with the thought of all that work ahead ..!
Doesn’t Berco sell chains ..? I know you are Mr ordinary!
I see snow outside so you are locked in the shop , which I must say is - a place for everything and everything in its place !
I’ll sit back and enjoy the journey 👍
About the pump, I used to work at a place with a 50 ton press that had a hand pump but we added an air powered hydraulic pump to it. We just 'T'ed it into the line so you could use either pump at any time. So we could bump the power pump to close things up but switch to hand pump as soon as we wanted to feel the load. You have to be OK with the fluids mixing and you have to try to release about the same amount back into each tank.
A tedious process like that can be really error prone if you loose your concentration. I would have a tough time with that. Congrats on getting it done! Plus, more custom tooling! There must be a whole cabinet full of that by now. I’m sure it’s well organized someplace. You should have a video quiz asking us to I’d them all!
Love the work and details BUT needs more cowbell
Very good Squatch
Maybe this winter I will watch this whole series again…
I have to believe that your tool set must be pretty close to what Cat used when they built those chains. Impressive how they allowed you to get every pressing to exactly the right depth easily and quickly.
Can't you adjust the pressure relief on the enerpac so say it would be limited to 5 ton so you would avoid any disasters.
Unbelievable amount engineering. Looks simple, anything but!!
When you started to talk about the new master bushings and pins I about had a stroke because i tried to find one for a D6 9U and couldn't find them, wish I had bought a set years ago, I made both the bushing and pin, so far seems to have worked out okay.
Pop. Pop, pop, pop!
Sounds like opening day of gun season! Thanks for another great video!
Very nicely done as always
Get a foot switch for your pump, you have to remember to watch your pressure gauge, plus it gives you both hands to work with.
Always impressed at how you make this all fascinating.
Always been curious as to how these worked, but also wonder why are the bushings not greased somehow?
Great work on the tooling and process I can imagine the hours you have put into the trial and error and carful thought for each step . Keep up the fantastic work. You nailed it again!
In the full spectrum of excitement you start with "about as exciting as watching paint dry".
I think the next step might be "watching pin & bushing pressing". Somewhat boring unless something goes wrong....and then it gets real exciting for a second or two! 😁
5 months of winter ----- Yikes. I save up winter projects & seem to go through them fairly quickly. There's always something that needs paint inside the house - I never seem to get to ..... 👍
Love that ! I’m pretty pleased winter has come … just because it gives you more shop time 😂
I could see building a fence on the receiving cup to Aline it with the link to offer one less thing to hold on to while pressing. Great work.
I was surprised that you had end built-up the wear side of the links.
Always interesting film, always impressive work.
It seems like the hand pump is better for the disassembly of the track chains since there is unknown excess friction/resistance created by corrosion in the push-fit area, leading to the chance of excessive force being applied to the press or other components. Without reviewing the previous video, weren’t some of those pins “popping” at 50 tons? By the time the pins are cleaned, wear shoulders beveled, and PFL applied, the press-fit force required would be much more uniform, like 30 tons, (?) and less fraught with high-pressure mishaps.
Great walk through. Thanks.
Pretty neat to think that you will be wearing original paint off the chain when you start running that again
Every time you said 15 tons as you pressed the bushings I was reminded of the old "Sixteen Tons" song by Tennessee Ernie Ford.
Might make a good music video
Wow, that will give him ideas for a music video.
You press 15 tons and what do you get, another track link ready and set.
I was thinking just the same. Then again you have to be old enough to have heard that on the radio. Back when penicillin cured everything. And my back didn't hurt.
Must be a Scandinavian thing. I like working with my hands too. Thank you.
Good video.
It sounded so easy months ago when you were talking about turning the pins, turns out it is hard, dirty, dangerous work.
Another absolute master piece. Look forward to the next one. Martin. (England)
Great work!!!!
The guide for the last bit of pin travel. Might it be a touch simpler to have one in place during the initial press with an opening just big enough for the pin to fit through & just thick enough to achieve the needed extra distance? Would help a little with the tedium of resetting to setup again then continue. Or doing this way to make it less likely it slips if doing the above method & send bits in 3 directions?
Been cold here in NE Texas: 45ish during the day lol. High 60's next week. Brrrrrr :)
Looks like you guys got powdered... here it's still 14C out. Very cool solution you figured out at 8:16 as an answer to their track chain pressing table. I saw one in the old magazines i peruse, and in essence, you've got the same result, but with a much smaller "outfit". Cool, cool.
Always love your tooling 🇺🇸💪
Also when you let the pressure off look at that press frame relax. I think this carpenter would be outside in the snow.
Fascinating to watch !!!
Great to see your process and home made tools to make it happen. Any thought of having a support of the other end of the link to help insure alignement without having to hold it up until pressure is on the side you are pressing?
If you take the links and put them into a oven at 350 degrees, then put the bushing into a freezer, they will start easily by hand.
@@squatch253 - they still will take a press fit to put them together, it makes for a much faster setup, avoids misalignment, and takes less force. When ever I did chains(I only replaced sections of links) I used this method and the equipment was all D6-D8 size, these rails were much worse than your D2s. Also during disassembly you will find any loose fitting pin/bushing. They all press at a minimum pressure, if one goes easy it’s likely junk.
It's good that you had those replacement bushings for the master links. If you didn't have them my guess is that you would have been able to take two of the regular bushings and cut them down to the right length on your lathe.
make sure you under stand the anealing process with tool steels. dont want nothing shattering on ya . good work !
It's not going to be long now! You'll be driving that for plow days and shows! 😀😃🙂🙃😊
One of your best videos yet, love it.
Seems to me like a feller needs a big cauldron of liquid nitrogen for those bushes and pins and an oven for the link plates, make assembly a breeze
Love your tool making
Thanks for explaining that!
there was one shot of a pin pressing into a link (timestamp 20:20)that had a perfect view of the wear line in the pin, but the video jumped to another pin being pressed in. I would have liked to see that wear line as it reached it's resting position. idk how much trouble it would be to add in to the public feed video, but I thought it would have been a good visual. And maybe I was just looking forward to seeing it too :) Can't wait to see those swampers on there!
@@squatch253 And we all know that isn't going to happen with dinosaur internet lol.
swag tools makes some heavy duty press plates.
Always good to see a new video. Informative as always. Now back to Squatch reruns! 😂
Seems like you got it down to a science.
I appreciate your attention to safety. Showing up at the Pearly Gates with a hunk of fractured steel through your liver has GOT to be embarrassing!
I think we might be hinted at something by the very first shot 😀
Practice makes perfect.
excellent video
Great explanation of the geometries of the pins and bushings when they are turned.
What happens to the overall track length if you select reverse under load?
@@squatch253 That make since ,you are only taking up slack on 2 or 3 pins and not 30. So the is not a lot of commutative affect.
The popping seems to happen when you stop short and start again. I'm sure it's hard to tell when your home and that is why your stopping short. Caution is good.
I'll be back !
I believe you said they could or used to do this in the field? I can't imagine what a job that must have been.
I like the pump I hate the noise we use the same pump to crush hard drives. You should really be wearing ear protection if you are not.
Here's an idea for an interesting follow up. What would be options for undercarriage parts once there's no more old parts to scavenge? Would there be ways to repair older parts?
Should the pins be pressed where the wear is not straight out from the link? As half of the pin wear is when the link is wrapped around the sprocket?
Toby, only a true neat freak could call either of those sets of bushings "piles." You want to see real piles of a whole variety of things, come visit my house
Sorry, I meant track links, I guess, not bushings. (I should wait until the entire video is over before I throw in my 2 cents.) Carry on.
If you like the manual non digital world-Check out “Analog Man” by Joe Walsh… I think you will appreciate the sentiment.
Also want to note you seem to be taking to this pretty well
Have you ever modified a wheel dolley with a tire chain to bring in firewood.
When pushing the pins in, how come you did this in two steps instead of having your home made tool in place and doing the press in one shot? For safety perhaps.
Great stuff now the hard part. Any idea how hard the pins and bushings are ? Why . I think I will have to make some to rebuild some
For a td5 as there does not seam to be a replacement for them .. hi from down under
Squatch I'd love to get in touch with you to see what you'd say about a 1936ish cat diesel 40 for sale here new England. I'd love to see what she's worth and if it's worth it. I wanna get into it like you are ! Thanks !
@@squatch253 thank you sir ! He's offering it for 3000 running and great tins. Original paint everywhere.
No wonder people let there tracks wear badly before they attempt what you are doing, lots of work, great!