HOW TO TEST IMMERSION SUIT ACCORDING TO SOLAS III/20.7 and MCS/Cric. 1047 / MSC/Circ.1114

Immersion suits should be inspected by the crew monthly on board, according to SOLAS III/20.7 and MCS/Cric. 1047. It is also recommended that each suit is subjected to an air pressure test such as the following, at intervals not exceeding three years and more frequently for suits over ten years of age.
Inspect for holes, tears or signs of wear. Suits used in salt water or in pools should be rinsed thoroughly inside and out with fresh water and turned inside out to dry, but not in direct sunlight. Grease and oil should be removed from suits with mild soap. Do not dry clean.
The zipper should be fully zipped, and any face flap closed. The suit should then be inflated to a pressure of 0.7 to 1.4 kPa (0.1 to 0.2 psi). If an auxiliary inflatable means of buoyancy is provided, it should be inflated through the oral valve to a pressure of 0.7 kPa (0.1 psi) or until firm to the touch.
MSC/Circ. 1114 Guidelines for periodic testing of Immersion suit for air pressure test.

[@luzzcess7358]

Very informative and educational

[@AakibKhan-ns6bh]

its has to be pressure tested every 3yrs....for immersion suit of more than 10yrs old it should be tested every 2 years.... test pressure 0.7 kpa to 1.4kpa...

[@JesiccaDaculcol]

This is good men, very informative.

[@judenesswood1476]

Good jobs guys

[@tomahawkhans1686]

Great job guys

[@woodypioneer]

Very informative, keep uploading, can we share this video

[@richmond3065]

Question Sir only in the zipper need to check how about in the stitches?then what is the recommended adhesive to use?

[@jobsseaman477]

Keep posting videos for seafarer

[@SherlilouAlbandonate]

Good info Guys

[@JollibeeMcDonald]

Good information mate

[@ChrisvinTambatoy]

Nice info

[@barryandrew9117]

Salamat mate

[@KCdelicaciesLacsib]

Thank you for sharing.

[@marinerongfilipino5812]

Thak you for sharing

[@joellhoidzlacsib7861]

tHANK you for sharing

[@mustafadans6032]

I couldnt understand do we have yo do this pressure test each months or we just check visually the condition each of them

[@oluwaseunjeremiah9523]

Pressure test
Ship 10 years , 1 year interval

[@ajitacharya429]

Name of equipment