Great machine I have the separate machines and the repeatable precision with Felder 700 series makes a huge difference when producing all kinds of joinery. Thanks for the videos
Totally agree. The accuracy you get is amazing. The 700 is definitely a step up, but i have to say, the 500 was just as accurate, just on the smaller side.
Hi Aaron, Thanks for watching. My decision was based purely on space. I am a one man shop with only 1000 square feet or 93 square meters of shop space. I have other machines in the shop like a bandsaw, pedestal drill, edge sander, mitre saw, 21 head boring machine, drum sander and 2 dust extractors. There is a small bathroom, along with a small spray booth and drying room. All this makes for a tight workspace, especially considering the shop is only 19'8", or 6m wide. A staircase running up to a mezanine where i have some storage as well as the lathe and my office also takes up valuable floor space. If i am doing any big cabintery jobs, or working on a big order of windows or a big door, space is very limited. The multi head boring machine and drum sander are on castors, but everything else stays in place. I would love to have all separate machines, but simply don't have the space to. The combination machine has a few drawbacks, but if you know the limitations, they can all be worked around.
Hi Toby, thanks for watching. Yes i can fit up to a 3/4" dado stack on it. There are a couple of different flanges that are used for the dado stack though. Without those you may not fit the stack on if it's more than 1/4" wide. What machine do you have?
@@tobyst4174 Hi Toby, i tried to reply with some photos, but i don't seem to be able to do that. bryce@brycecomerwoodworks.com is my email address. If you would like to shoot me an email, i will send you the photos of the parts. What i can tell you though, is that the part numbers of the pieces are as follows. 420-007-048; 420-007-049; 420-007-050; and 420-007-051. Regards, Bryce
That’s really kind of you… i’m gonna see if those parts are available for me, i’ll send you some pictures of mine this evening (i’m from Belgium so the timing will be different for you 😉)
Hi Steven, it would just go through a 60" opening if the handles on the jointer bed are removed, and the outrigger arm is also removed. Unfortunately this may still be too big without the doors being removed and maybe even the door stops on the jamb removed. Of course if they are rabetted jambs that won't be possible. Taking the casing/architrave off the door jamb and removing the whole jamb though should give you the space if needed. Easy enough to do, & would just require a bit of touch up painting once put back together. I hope that helps.
Hi again @stevensander925. I just realized your question related to the new machine and not the old one. When i replied, i was thinking of the CF531 which is a little narrower than this machine. I don't think you would get it through a 60" opening. I can check tomorrow if you would like?
Thanks for watching @woodzzy1. Here in Canada, this machine starts at about 38k. It then goes up from there depending on what options you order it with. I would suggest getting a quote online from the felder website of your country, that way you will know for sure what it would cost.
living the dream my dude. a combo machine is in my first purchase when I get a garage built.
Hurry up and get that garage built!! 😀
Great machine I have the separate machines and the repeatable precision with Felder 700 series makes a huge difference when producing all kinds of joinery. Thanks for the videos
Totally agree. The accuracy you get is amazing. The 700 is definitely a step up, but i have to say, the 500 was just as accurate, just on the smaller side.
What made you decide to go with a 4-in-1 unit rather than 2-4 different machines?
Hi Aaron, Thanks for watching. My decision was based purely on space. I am a one man shop with only 1000 square feet or 93 square meters of shop space. I have other machines in the shop like a bandsaw, pedestal drill, edge sander, mitre saw, 21 head boring machine, drum sander and 2 dust extractors. There is a small bathroom, along with a small spray booth and drying room. All this makes for a tight workspace, especially considering the shop is only 19'8", or 6m wide. A staircase running up to a mezanine where i have some storage as well as the lathe and my office also takes up valuable floor space. If i am doing any big cabintery jobs, or working on a big order of windows or a big door, space is very limited. The multi head boring machine and drum sander are on castors, but everything else stays in place. I would love to have all separate machines, but simply don't have the space to. The combination machine has a few drawbacks, but if you know the limitations, they can all be worked around.
Can you fit a dado blade on there? I'm figuring out how on mine, it doens't seem to have an interchangeable flench...
Hi Toby, thanks for watching. Yes i can fit up to a 3/4" dado stack on it. There are a couple of different flanges that are used for the dado stack though. Without those you may not fit the stack on if it's more than 1/4" wide. What machine do you have?
Thank you for your answer! I’ve got the CF 741 SP but i don’t think I have the removable flanch… sadly tough
@@tobyst4174 As soon as i'm back in the workshop today i'll take a photo of the parts you need.
@@tobyst4174 Hi Toby, i tried to reply with some photos, but i don't seem to be able to do that. bryce@brycecomerwoodworks.com is my email address. If you would like to shoot me an email, i will send you the photos of the parts. What i can tell you though, is that the part numbers of the pieces are as follows. 420-007-048; 420-007-049; 420-007-050; and 420-007-051. Regards, Bryce
That’s really kind of you… i’m gonna see if those parts are available for me, i’ll send you some pictures of mine this evening (i’m from Belgium so the timing will be different for you 😉)
Would this machine fit through a 60" wide double door?
Hi Steven, it would just go through a 60" opening if the handles on the jointer bed are removed, and the outrigger arm is also removed. Unfortunately this may still be too big without the doors being removed and maybe even the door stops on the jamb removed. Of course if they are rabetted jambs that won't be possible. Taking the casing/architrave off the door jamb and removing the whole jamb though should give you the space if needed. Easy enough to do, & would just require a bit of touch up painting once put back together. I hope that helps.
Hi again @stevensander925. I just realized your question related to the new machine and not the old one. When i replied, i was thinking of the CF531 which is a little narrower than this machine. I don't think you would get it through a 60" opening. I can check tomorrow if you would like?
@@brycecomerwoodworks Thanks for the update. I was asking about the your new machine.
How much does it cost? Awesome machine. I’m looking for a 10 feet slider too.
Thanks for watching @woodzzy1. Here in Canada, this machine starts at about 38k. It then goes up from there depending on what options you order it with. I would suggest getting a quote online from the felder website of your country, that way you will know for sure what it would cost.